Select multiple channels for a single task - control and shift keys do not work

Similar Questions

• control, function and shift keys do not work

  I have a laptop computer VPCEA25FG of the series e. I recently formatted the pc using the sony built option. everything now works fine expect my shift keys, fn and control do not work properly. When I press these keys, they give random entries. No etc num lock is on... all the keys to toggle etc are switched off... i even tried to update the driver, but it still does not work. any help

  samkam,

  Since you already have a factory recovery I don't think it's a software problem.  The issue could be with the keyboard itself or the motherboard where the keyboard controller is defective...

• Dedicated for each channel from multiple channels in a single task task disadvantage

  Hello

  My current acquisition software (C + c++ / GCC) encapsulates the methods rather clumsy niDAQmx C to interface with the data acquisition equipment in a class that represents a task of acquisition. This way I can create several instances, for example counter input, analog input, analog output, their terminals and the class supports all work low level as ensuring input analog fake internal is started if there are only counter entries such as the sample clock starts, or configure reminders N-sample, etc.

  It seems to work very well, and also the time seems to be good, because first of all the tasks on multiple instances of my wrapper. For triggered early, that I use

  DAQmxCfgDigEdgeStartTrig(mTask,mTriggerTerminal.toAscii().constData(),DAQmx_Val_Rising)

  in-house.

  Now my real question: what is the advantage of multiple channels, when everything seems to work fine with multiple tasks and only one channel per task? I don't see the disadvantage, it would first classify necessary acquisitions in types (I, ao,...) because several strings in a single task must be of the same type. With my approach I need not care because each channel still gets its own task.

  I don't know I'm missing something here. Maybe someone can explain it to me, maybe some limitation of multi-tasking, I have not yet read.

  Hey!

  Unless you specified for managing the it (simultaneous sampling) or modular instruments and hardware devices (see link )

  You cannot perform two tasks at the same time that access to the analog inputs, for example, because the

  ADC is a shared resource that is connected to a multiplexer, and that only one task can work in it at a time given. (see here )

  Similar restrictions often apply to other types of operations.

  I'm not aware of any performance issues, perhaps a little more memory could be used.

  So as long as your hardware supports what you are doing, you should be ok, I think,

  and it is only a question of clarity and intelligibility, ease of use and structure.

  As you use classes, I'm sure you've heard about encapsulation - so it is a

  question of how you want to design your application.

  In addition, when you work in LabVIEW, tasks feel more natural to the principle of data flow, because you have a thread for your data acquisition,

  and it works very well with our modes of standard design.

  So, if it is better for you (and works with the hardware), you can give all the channels its own task.

  Hopefully this might clarify some things,

  Kind regards

  Rome

  OR Germany

• How to place outgoing files to multiple channels for a single agreement

  Hi all
  We must send the single at two different (channels) locations of the TP even HIPAA 834 document. We have unique HIPAA 834 agreement with a TP and a channel. is it possible to add both outgoing channels TP for a single TP/agreement?
  
  Thank you
  Kathar

  Hi Kathar,

  is it possible to add both outgoing channels TP for a single TP/agreement?

  A TP can have several channels, but an agreement can have only one associated channel. You can opt for the Oracle B2B here broadcast feature.

  You can read about this feature here-

  https://blogs.Oracle.com/oracleb2bgurus/entry/broadcast_feature_in_oracle_as

  Please note that this blog was written for 10g but concept and implementation is same in 11g.

  You must create two profiles TP TP even (you must use a different name/identifiers for both) and then to be part of the same group by adding identifier 'Group' in the two profiles with the same value. Middleware pass the header ' comprising:"in the name in name or an action event header.» When executing B2B will send the same message for two profiles TP.

  Kind regards
  Anuj

• 'shift' key does not work in the multiple selection table

  I created a table by dragging default datacontrol vo, the multiple value RowSelection, override the SelectionListener a manageBean method as follows:
  
  {} public void tableMakeCurrent (SelectionEvent selectionEvent)
  RowKeySet rks = selectionEvent.getAddedSet ();
  System.out.println (RKS. GetSize());
  Iterator it = rks.iterator ();
  {while (IT.hasNext ())}
  System.out.println (IT. Next());
  }
  }
  
  The problem is when I use 'shift' button help me select several lines, it will only print the last line, which I selected.
  
  Is there a way to fix this? Thank you...
  
  jdeveloper11.1.1.3

  for rowSelection multiple = to work with 'shift' you should not have the selectionListener or selectedrowkeys for your af:table
  http://www.adftips.com/2010/11/ADF-UI-implementing-multi-select-table.html
  delete selectedrowkeys and ownership selectionListener in the table and you will get select using the 'shift '.

• Satellite Pro M30 - Win XP - for the brightness of the display FN keys do not work

  I just do a fresh install of win xp on a satellite pro M30 laptop.
  I installed the drivers bt the fn keys (brightness, etc.) will not work if the screen is very dark!

  I tried to update the bios, but it won't let me.
  Also tried to install the common modules but get an error saying that it didn't is not supported on this hardware!

  Can someone please help.
  I think you need to install the drivers in a specific order.
  Is this true? Or y at - it way round this?

  Any help would be appreciated.

  > I tried to update the bios, but it won't let me.
  > Also tried to install the common modules but get an error saying that it didn't is not supported on this hardware!

  To me, it seems that you tried to install applications that are not compatible with this laptop.
  Where did you get the drivers?

  On the European driver of Toshiba in archive page, you can find the drivers for Satellite Pro M30

• Re: Installed update the BIOS for my Pro Satellite L300D and now screen does not work

  Hello

  I installed the update of the BIOS 3 days ago, I had a few programs that are open at the time and also an external USB mouse in time. The hard drive crashed and then blacked out, but the power was still on the turbine runs at full skin. I tried to turn off the computer by the power button, but it wouldn't, so I let it run out of battery. Since then, the computer seems to turn on but the screen has been blackened since then, I can't see what the State of the hard drive is in.

  Any ideas?

  Hello!

  Oh dude, it looks like that your ROM module is damged due to a defective BIOS update :(

  A BIOS update should normally * do not get with the implementation of substantive programmes (also antivirus). I think that's the reason why the n t successfully update.

  However, you can do nothing. You will need help from a technician for laptop that can try to reflash the ROM module On the Toshiba page, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

  Good bye

• I had a problem with my double (multiple) of the mouse clicking when I didn't, now pressing on enter a window like this will close the active window and open one of my sites of taboo, and the keys do not work.

  This happens in any text entry window, but there is no problem with Wordpad or Word, or other apps, just in Firefox. It's as if the keyboard mapping got fouled in Firefox, but I can't find where I could check what is happening.

  You may have to Navigation switched to the keyboard IT. Press on F7 (on Mac: fn + F7) to alternate power of Caret navigation

  • Click on the Firefox button, then click on Options -> advanced-> general-> remove

  Check always use the keys cursor to navigate pages

  • http://KB.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
  • http://KB.mozillazine.org/Accessibility_features_of_Firefox

  Check and tell if its working.

• I replaced my color for an officejet v40xi ink and red ink does not work.

  Red ink ran out so I replaced the color ink cartridge in my officejet v40xi and Red does not.

  What can I do to fix this?  Thank you.

  Hi timinob,

  I understand that your printer is not printing red ink.  I'll take a look at the document below.

  OfficeJet v40xi

  Let me know how it goes.

  * If you find this useful or mean please make sure you click on the White Star under my name to give me congratulations. **

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• How to choose different lines for a single sale order and ship individually

  I have a customer order of lets say 10 broadside of this same article for quantities of 10 each which means 100 quantities.

  When I use the release sales order form it will take the entire order and forward it.

  But I need to take the line and then generate a delivery against it and then to ship and invoice it.

  Need to know how to do this

  You can take different lines for a single sales order and ship individually using FORM of TRANSACTION of DELIVERIES.

  Navigation: OM RESP > order management > shipping > Transactions

• Tab and control keys do not work in Firefox (they work in other browsers) AND I went to a new keyboard.

  Tab and control keys do not work the browser Firefox (my browser is up-to-date). The buttons work in IE and Chrome, however, until I realized that, I even changed my keyboard for a brand new, hoping that would solve the problem.

  Hello arlusk, the problem is probably an extension that is not working properly. Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • You can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  Once you get the pop-up, simply select "" boot mode safe. "

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  Thank you.

• My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  My Inbox to view the sender for each message and now it does not work... How do I get it back to where it was?

  Right-click on the header at the top of the list of messages and select from the list of options.

• Installed Tuneup Uitlitie and my control keys do not work

  Hello

  Since I installed Tuneup Uitlities my keys do not work.
  For example: I can't adjust the sound volume or toggle wlan with the keys F1 - F12.

  I already searched in Google, but I can't find a solution. Is it possible that Tuneup have uninstalled or disabled the Launch Manager? How can I install/activate this new?
  I can't find something.

  Hope someone can help me,

  Katja

  > Is it possible that Tuneup have uninstalled or disabled the Launch Manager?

  Never heard talk of launch manager on the Toshiba laptop computer, but of course, the FN buttons are controlled by special software.
  I put t know what system you are using and what laptop do you have but for example:
  Using the Win 7, value added package system and some utility Flash card access buttons controls the FN.

• N8M19PA #ACJ: brightness control keys do not work

  I had my hp laptop a week back.at first keys work alternately means once it works and another time keys are not working.when keys do not work, I used to restart my system while they working.but now, brightness control keys do not completely work. When I used to turn it back on as they are not working.what do I do now? He made me suffer a lot and the strain in my eyes

  aravindsatya

  Uninstall the driver of HP wireless button and restart

  Install the driver

  http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71829.exe

  your system for other drivers page