Select the default tray when printing from MS Word or any other application HP OfficeJet 8610

Hello

We have HP OfficeJet 8610 with additional tray. So, we have Tray1 and bac2. That's what I read in the specs of the printer about how we can use the bins:

  • Loaded into all of the paper trays and use paper from a tray if the other tray is empty
  • Loaded into all trays and paper of one of the bins first use
  • Be able to choose plain paper and another type of paper that you use occasionally

My question is:

Let's say that we have put the tray 2 as the default tray.

In MS Word or any other application in layout, you can define special tray (say 1 tray) paper source. This means that the document should be printed on paper from the selected tray (Tray 1). But in our case, the document is always printed using paper from the default tray (tray 2).

Could you please confirm that this is the expected behavior?

Thank you so much, Ana.

Hi @AnaGligorijevic,

I understand that you want to be able to print the same document at different trays and change the setting via the Word software. This printer is not able to change the settings of the tray for different pages in the same document to multiple pages.

To work around this problem, you can use the parameter to "print pages." "Select it print pages selected, then for other pages ' print pages" yet once and then change the parameters of the status bar of the application.

The application, you can change the settings of the tray for 1 page or a multiple page document. But it will print all pages of the specified tray.

Hope that makes sense. Thank you!

Tags: HP Printers

Similar Questions

  • officepro 8600 more do not select the default tray paper

    Second paper tray added OfficePro 8600 more.   Printer recognizes second tray to tray 2.  Changed to render settings of the printer tray default 2.

    Funtion copy to printer takes only of the plateau which had envelopes.

    Browsers (Fire Fox) also print only from the Board one, what is envelopes.

    Settings in Microsoft Office implemented so that Word prints correctly.

    How can I tell the printer to select tray 2 paper letter?

    Thank you.

    I see that you are having problems with the 2nd set, this can be confusing. You will need to go into the actual printer settings and change TRAY 2 as default. On the touch screen, select:

    1. click on the configuration Menu
    2. click on Preferences
    3. default tray
    4. Select tray 2

    After selecting this option, and then try to print and see how it goes. Don't forget with the 2nd plateau, its not installed with printer drivers, so you have to put all the letter paper in TRAY 2 (as you already have). Any other type of paper (legal, envelopes, etc.) will still go into Tray 1.

    Let me know if this can help, thank you.

  • I'm having a redemption code that goes into problem.  I can enter numbers, but when I try to enter all the letters it is as if the computer is locked, but he is not on any other application

    I'm having a problem entering my redemption code.  You can enter numbers but no letters.  It's as if the computer is locked when I try.  My letters work on any other application

    Looks like you are trying to use a (alphanumeric) redemption code where you are supposed to use a serial number (strictly digital).  A purchase is normally used to purchase a serial number... serial number is what you enter to activate the software.

    Using redemption code

    --------------------

    http://helpx.Adobe.com/x-productkb/global/redemption-code-help.html

  • can "print image" be defined as the default value when printing PDF files?

    We have many students to connect and when they print PDF to our Lexmark printers it works best for "print image" otherwise printers get bogged down and hang sometimes. We would like to see if we can have 'print picture' it set as the default when printing PDF files?

    Hi desktopsuofslib,

    There no option in Acrobat to define 'print as image' as option by default because as soon as we opt for this option, the profile of settings is automatically replaced custom Acrobat default.

    However, I have noticed that when you use the option 'print picture' for a specific printer and print a document, that this option remains active for subsequent printings, unless you change it manually.

    Kind regards
    Rahul

  • How can I change the default image when pasting from my site on social networks?

    When I paste my url on a site like facebook or linkedin, it shows a random image from one of my projects. Is there a way to change this image?

    Hello! Each social platform is different, here is our methodology behind the thumbnail generation when you share a link Adobe portfolio.

    1. If you share a project page, the image you see is the cover image for this project.
    2. If you share a custom page, the image you see is the first module of the image on this page.
    3. If you share your Gallery page (very probably what your url lands on first) you can see the cover of the last project added.

    If you're still having trouble with the thumbnail that is generated on Facebook, it could be that the image is cached. To catch up on Facebook with your portfolio changes, use the debugger link here: https://developers.facebook.com/tools/debug/ and then try to share this link.

  • Printing blank pages when printing from Word 2007, WordPad and Notepad, print well other programs

    Weird printing problem

    Good, in Windows Vista and using a printer HP Deskjet 645c with the updated driver, here's the weirdness:

    When printing from Word 2007, Wordpad and Notepad, the sheet through the printer appear in print, but no printing actually takes place. Same for the two existing documents and those newly created. On the other hand, everything prints normally IE8, Firefox and Adobe Reader. Reinstalled the printer driver and also to delete the Word data key in the registry. No love. Automated ran, troubleshooting of MS, but still no love because he found no problem. Someone at - it a good idea? Seems there must be something in common between Word, Wordpad and Notepad, which I suppose are at least somewhat in the code, or perhaps in the way they approach the printer driver.

    Hi TNCharlie,

    (1) I want to clarify if you arejust I try to print the text or insertion of objects into Word and WordPad?

    Fonts and graphics damaged can cause printing problems in Word/WordPad

    (2) using a wireless printer?

    Check to see if it makes a difference if connected.

    Step 1: This test in word

    1. open a new blank document in Word.

    2. on the first line of the document, type the following text:

    = Rand (10)

    3. press ENTER. This inserts 10 paragraphs of the sample text.

    4. try to print the document.

    5. If the document prints correctly, replace it with another font or insert a clip art image, a table, or a drawn object

    Step 2: Don't know if you have tried this fixit, please run the fixit available in the link below and check if that makes a difference

    Problems printing and printing errors
    http://support.Microsoft.com/GP/printing_problems/en-us

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit ourMicrosoft answers feedback Forum and let us know what you think

  • Printing from IPad or Iphone always goes to Tray 1, but tiroir2 is the default tray.

    Product name: OfficeJet 8500 has more

    Op systems: Win 7 & Apple Ipad and Iphone and MAC

    Error messages: no

    Changes: has never been worked, no change

    I have two bins in my printer.  Tray 1 is used for envelopes and tray 2 is the standard letter paper.  Tray 2, is that the default bin for normal printing and works perfectly in my Windows 7 Desktop.Tray 1 is the only one who can handle the envelopes so there is no other choice on what bin to use.

    However, when I try to print from my IPad, IPone, or my wife's MAC, printing always goes to Tray 1 which contains only envelopes.

    It seems not all options in the IPad or Iphone to select a bin, but I would have thought it would go to the default tray which is installed in the printer.

    For this reason, it makes the officejet 8500 more useless a eprint.  I like having the upper tray for envelopes, but I don't know that I would have bought the option two tray if I had know this before time difficulty.

    Forward to your response

    Ray

    Hi Ray,

    • Mac, you can change the settings of the tray as follows:

    1. check that the second tray has been installed correctly. To check this open system preferences and go to Print & Fax. Open the print to your printer queue. Click Printer Setup and in the tab menu choose driver. Make sure the box next to the entry optional feeder is checked.

    2. starting at the application used to print, click the file menu and select print.
    The print window is displayed.
    NOTE: The print window might be minimized: click the blue triangle next to product model (Mac OS X v10.5 or v10.6) or the button view details (Mac OS X Lion v10.7) to see all of the available parameters.

    3. to select the input tray, click on the area of selection below, listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.

    4. Select the Type/quality paper in the menu dropdown.

    5. adjust the Source option as the desired input tray.

    You can save the settings for later use by clicking preset > save current settings as preset.

    • For iOS, Airprint does not support any selection of tray, but only the 1st plateau.

    However you can use HP ePrint home & Biz however, taking charge of selection of the status bar:

    http://support.HP.com/us-en/document/c02775166

    Kind regards

    Shlomi

  • When transferring a message from the sent folder, it does not select the default identity, but one of the others. How to configure it to send to my address

    If I am sending an e mail to my sent folder, the field does not automatically select the default identity but insterad he sends e-mail to e of my daughter and I select the default value in the drop-down list. can it be configured to send the file sent using my default email instead of having to remember to change on the menu drop-down

    Looks like this add-on is more suited to your needs:

    https://addons.Mozilla.org/en-us/Thunderbird/addon/folder-account/

  • folds of 7612-printer Officejet 11 x 17 Paper 3 "from the top when printing from my computer

    Name of product-Officejet 7612.  Operating system - OS X - Yosemite (10.10.1) for my desktop and OS X (10.6.8) for my laptop.  Problem when printing from a Mac machine in the Officejet 7612 on paper 11 x 17, it will always create a mountain/valley fold all the way across the top of the sheet about 3 "from the top.  The folds will be straight through.  Whether it's origami, it would be the perfect machine.

    When I print from the control panel of the printer (for example a printing of print quality, or something www.hpeprint.com like news or some other print it will print properly with no fold either.)

    It seems as if this in case of instructions from the computer to the printer to print, he gets in a hurry to get the document creating the folds, but when it comes to the machine itself, he picks up the paper gently.

    Any thoughts?

    Hi @Bodija ,

    I see that you have problems when printing on 11 x 17 size paper of Yosemite, but you can print the thin material and ePrint test page. I will definitely do my best to help you.

    When you print from the computer, you can print on letter-sized paper or are you just had the problem with the paper 11 x 17?

    Here is a document to clean the rolls of paper to see if that will help.

    A "Paper jam" error displays on the e-all-in-one printer large Format HP Officejet series 7610.

    Go to Solution 5: clean the rolls of paper.

    Using the full feature software drivers?

    Series 7610 Wide Format e-all-in-one-HP Officejet full feature software and drivers.

    Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
    Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Officejet 7612)

    If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

    If you still have problems with it is software related, try the following steps.

    Fix permissions of the drive on the Mac:

    Close all applications.

    In the Apple menu, click OK, click Applications, and then click utilities.

    Double-click disk utility.

    Highlight your hard drive / partition on the left.

    Click on check and then repair disk permissions.

    Restart the computer...

    Reset the printing system:

    Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

    Click on the Apple icon and then click on System Preferences.

    Click on Printers & Scanners.

    Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

    Click OK to confirm the reset.

    Type the name and the correct password.

    Click OK to reset the printing system.

    Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

    Try to print again.

    How the name of the printer was placed in printers and Scanners?

    If you need help, let me know.

    Have a wonderful day!
    Thank you.

  • I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.

    Original title: new printer

    I replaced a HP with an Epson Stylus all-in-one printer and cannot get the printer to print more than one page when printing from the computer.  The printer works fine when printing from a laptop or ipad!

    Start by going here--> http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?UseCookie=yes&oid=232591&prodoid=63099059&infoType=Downloads&platform=nodetect

    If the web page has not correctly detected your operating system, select it by using the drop-down list.  Rather than using the "Combo package" recommended but huge, expand the "Drivers" section and download driver printer v2.32 to a location that you will remember later.

    • Click on the ORB start and go into devices and printers.
    • Select (click) the icon of your Epson printer.
    • Once you have selected the printer, a button labeled "Print server properties" will appear in the toolbar.  Click on this button.
    • Click the "Drivers" tab on the print server properties dialog box.
    • Select the Epson printer in the list of installed printer drivers, and then click 'remove '.
    • In the context menu, select "Remove driver and driver package" and click OK
    • Click Yes, and then delete
    • Once the removal process is complete, restart the computer (probably not really necessary, but can't hurt)
    • Install the driver and the software using the file that you downloaded earlier

    At this point, your printer should work fine.  However, if you want the ability to print by emailing a file to your printer, you may need to install both 'Remote Printer Driver v1.65' in the category 'Pilot' and "v1.30 utility Configuration of printer Epson Connect" in the "Utilities" category

  • Office jet pro 8600 how default to black ink only when printing from my ipad

    Is it possible to set an option to print the black ink only when printing from my Ipad 2?
    When I use the print icon the only option that shows is double page. I would like to be able to print in black only.
    I can set this option when you print from my pc...

    Hello

    AirPrint does not support black ink only printing, however the HP ePrint app allows it.

    Note that the option is available only for documents (for example Office, PDF, Web pages and emails files), but not for the Photo files.

    You can find the steps to obtain and use the application in the document below:

    http://support.HP.com/us-en/document/c01616126

  • Page layout is changed when printing from the internet

    When I print from the internet, the page layout is changed even if there is space on the paper to print an entire line, say photos and captions.  Also, it shows in preview print and happens when I print from two different computers.  My option is sent to "keep the page layout.

    Hi Trishpm

    I have the same problem when printing via wirelss network attachment that I print not print the same way, have you managed to solve the problem?

  • How to select the default value for a choice of selection when page.jsff load

    Hello everyone, I am newbie have little problem

    I have problem with soc (selectOneChoice)
    in this case I ' to select the default value of af: SelectOneChoice (select first selectItem) when the page is finished loading

    < af:selectOneChoice label = "" Jenny Bahan: "id = 'soc1'"
    autoSubmit = 'true '.
    valueChangeListener = "#{WHStockSetReleaseBean.cekJenisBahan} '"
    Binding = "#{WHStockSetReleaseBean.v_jenisBahan}" >
    * < af:selectItem label = "GBB" value = "GBB" id = "si2" / > * = > i'want to select this value for the default (select first selectItem)
    < af:selectItem label = "GBP" value = "GBP" id = "si1" / >
    < / af:selectOneChoice >

    If someone help me to solve this problem

    THX
    agungdmt

    Hello

    try to set the attribute value to af:selectOneChoice like that.

    
    

    Kind regards
    Sicard.

  • HP 8630 will authorize specifying the second tray for printing shortcut.

    All-in-one printer inkjet HP 8630 range Pro will not accept specifying the second tray for printing shortcut. Indicates that the parameter is a conflict and obliges the "Printer Auto Select" option instead of allowing me to select "tray 2" which is an option. I like to keep a white shining in tray one and photo paper in tray 2 and made the my HP 8500 Pro for everything that I needed to do is select the appropriate shortcut configured by me to print the photo. Operating system is windows XP Pro.

    I want to start by apologizing for not picking up on this on your first post. The 8630 2nd tray print 8.5 x 11 or 8.5x14 paper.

    The reason why what impression pictures he says that there is a conflict and if he chooses the main tray is because there is no choice. The printer does not have the ability to print photos from the 2nd drawer. If you're looking to load media into the trays you need 8.5x11 or 8.5x14 in the 2nd tray and other media can be loaded in the main tray.

    In the printer's Specifications in paper output specifications > paper tray capacity & Supported sizes of paper in you shows what's available for trays.

    Change the source of your document must make all the problems disappear.

    Kind regards

  • Image reverses from positive to negative when printing from Windows Photo Gallery

    When I try to print directly from the photo gallery in the overview page positive image flashes until shortly before the reversal to the negative and I see nothing in the preferences of the printer (Canon iP4500) to remedy this.

    The effect occurs only on jpg that were downloaded from my own camera - other jpg is OK.

    I have no problem with the same images when printing in Photoshop.

    Hi bigfritz,

    Welcome to the Microsoft answers community site.

    Different types of devices tend to possess the capabilities and features of different color. Displays, for example, cannot show the same color scheme that can reproduce a printer. It is because of the fundamentally different processes that each device used to produce color content. Scanners and cameras have different color characteristics. Even different programs sometimes interpret and process colors differently. Without a consistent color management system, the same image can look different on each of these devices. The appearance of the content of the color depends also on the viewing conditions (for example, ambient lighting). This is because the human eye adapts differently to different conditions, even when you view the same image.

    Thus, the color management manages relationships within color content so that an acceptable appearance can be achieved on different devices with different color and in conditions of display capabilities. This requires color management systems to control the relationship between the characteristics of the device and viewing conditions to produce acceptable results.

    Color profiles are usually added automatically during the installation of new devices. Color profiles can also be added by color management tools, such as devices of calibration for the monitors. As a result, it is likely that there are already profiles for your devices.

    However, if you need to install a new profile, follow these steps:

    1: open management the colors by clicking on the Start button, clicking Control Panel, hardware and sound, and then clicking color management.
    2: click on the devices tab.
    3: in the list of devices, select the color device that you want to associate with one or more color profiles.
    4: select the use my settings for this device check box, and then click Add.
    5: you should see a Source to sRGB space. In the print profile you must now select the barrel profile that fits the study. You should see these choices for Canon paper.

    Canon IP4500 series GL2
    Canon IP4500 series GL3
    Canon IP4500 series MP2
    Canon IP4500 series PR1
    Canon IP4500 series PR2
    Canon IP4500 series PR3
    Canon IP4500 series SP2
    Canon IP4500 series SP3

    6: these correspond to specific types of paper Canon - PR > GL, Pro Photo paper > iced, MP > Matte
    7: then go in / intensity of the color and choose the manual Option. Click on Set and in respect of the Correction colors choose None.

    For more information, see Color settings management: frequently asked questions

    Let me know if it works. Good luck!

    Hope this information is useful.

    Thank you and best regards,
    KKS Vijay

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

Maybe you are looking for

  • MacBook Pro does not start after asking password

    My MacBook Pro asks for my password, then the password window disappears as if it is going to start but then it asks for the password again. This happens again and again and again

  • Restore backup - 7 + days.

    My new 6s goes on to say that he is restoring from backup.  How can I check which is always restore?

  • Re: No beep low battery on Satellite A200-1CR

    HelloI did format my A200-1CR (PSAE0) Satellite with my vista cd, not the restore cd.The reason was that toshiba had too many things - drivers, programs - which my pc required 3 min to open and to close 3. After the new installation is really good, I

  • H277HU rotates randomly and the

    You just bought a new H277HU on Amazon - when it is connected via the cable provided by Acer USB - C for a whole new Apple Macbook of retina (2016 version), it works great, except that it randomy goes out for a second or two, and then turns back on.

  • G550 or B560?

    Hello I don't know much about computers. Here are the five things I need on my computer to do: i write (ii) surfing (iii) watch movies (iv) listen to music (v) modify the photos I think buying a G550 or B560. I have no idea of what is best. I'd love