Selecting with the range of colors does not work correctly
Well, at least for me it does not correctly. If I have items on separate levels, and I use the color range option to select the area, it works at all levels, not just the level I selected. This isn't what I want! I want only to choose the range of color at a level. The work-around needs to manually turn the other levels, but on a file with a lot of levels, which can be tedious. Can this be avoided? Either way, magic wand works only on the selected level, but not color range (or the range of colors, if you're American).
The work-around needs to manually turn the other levels, but on a file with a lot of levels, which can be tedious.
Hide all other layers can be done by alt-click on the visibility icon in the layers panel.
Microsoft Flight Simulator 2004 installation with the 4th vista disc does not work. What should I do?
You get no matter what error code or error message?
There seems to be a problem with the file missing in the rear disc system. I suggest you to refer to the following Microsoft article and check if it helps.
Flight Simulator 2004: known video issues: http://support.microsoft.com/kb/823628
If the steps in the Microsoft article mentioned above do not help, then it would be best to ask your question in the Microsoft Game support forum.
Microsoft Flight Simulator Games Forum: http://www.fsinsider.com/
Or contact support for Microsoft Flight Simulator game: http://www.microsoft.com/Products/Games/FSInsider/tips/Pages/default.aspx
Hope the information is useful.
I have an Apple computer, use the browsers Safari and Firefox. I use Apple mail and Comcast to my email. Lately, in the case of Firefox, my email does not work correctly. I get a message "your server license has expired. While usually, I can access my emails, I can't delete the unwanted emails. This problem will not occur when I use Safari and Apple mail. Is this a problem of Firefox or Comcast? Do you know what license is expired?
Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be you temporarily disconnect all sites, you're connected to.
To clear the cache and cookies to do the following:
- Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
- Under "Time range to clear", select "all".
- Now, click the arrow next to details to toggle the active details list.
- In the list of details, see the Cache and Cookies and uncheck everything.
- Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .
This solve your problems? Please report to us!
I just plugged a usb2.0 webcam on my laptop with windows vista. It is loaded ok, but the device manager says that the device does not work correctly. Any ideas please.
I just got a webcam via ebay and plugged into my laptop. I'm working on windows vista. He finds and load device software right away, no problem. But I can't work. go into my device manager it tells me that the device does not work correctly. Any ideas please.
The first thing I would try is to connect the webcam to another computer to make sure that the webcam is not defective.
Now, check out these links and return to the State of the question.
When hardware installed in or attached to a computer doesn't work properly, it is often because of a driver problem.
Here are a few common problems with drivers and the means to solve them.
See the following link for more information:
Also check out the following link and run the fixit available.
The fixit diagnose and solve problems with the equipment. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.
whenever I have to video chat with anyone with front camera on they won't listen to me. Even when I record with fromt camera microphone does not work with the camera back, everything works correctly and even with siri, I can't talk more but when I take a call they can hear perfectly
Hi il. I recently installed Adobe Audition7.2 on my windows 8.1 and I noticed the button sound recording from the microphone inside the program is disabled while at the same time, I could record using other programs on my windows. I worked with my AU and eliminate the background of an old audio recorded sample. ((mon micro intégré est donc bruyant) noise) I chose a very noisy place and crossed the effect / noise noise reduction of the restrictions/print capture. And then I went through effect / restrictions/noise reduction noise reduction process and apply the settings. Although it works and my sample file has improved (without noise), I encountered another problem, my mic does not work normally both in AU and other windows software. The recorded sound now go offshore and (rough) while recording. How can I solve the problem?
I also followed the instructions on this link https://forums.adobe.com/thread/1546014?start=0 & tstart = 0 and installed ASIO4ALL... but this isn't work, the program may not work correctly for me.
Thank you for your attention.
If your microphone is sounding restless that you save (rather), there is problem on your Windows sound settings. As Steve G suggested it sounds like a form of blocking to reduce the noise. I don't know if this is an effect that Windows 8.1 can do to the incoming audio signal. If you find a way to turn it off.
How can I fix printer service spooler does not work error? My two printers won't work now, and re - install the printing software produces error messages. Tried to use microsoft fix - it for printers without result.
See the article below which has some useful suggestions to fix the print spooler error.
You cannot add a printer and you receive Printer Spooler error messages in Windows XP
Error message when you use the Add Printer Wizard: "Operation could not be completed.
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
My performance of Lightroom is not great. After you have installed the appropriate NVIDIA, GeForce card GTX 970 graph with 4 Gig of Ram, Windows 10 (latest version) with 32 Gig RAM and the latest version of Lightroom CC (2015.3), I am always facing update slow in the develop module image. The software does not remember the excerpts that I created (1:1). Whenever I click on a photo of the flows, the share of the image of being clear-> blur-> to clear, which take about 15-20 seconds. This happens even though I have already generated previews 1:1 for all images in the catalog. I need help to set the settings so that I can have a good experience with lightroom.
I tried to follow some recommendations:
1. leave a 160 Gig camera Raw Cache framework
2. install an SSD for the start and placed the catalog Lighttroom and Cache folder under the default Images directory, under the my account profile
3. has created a new catalog that is less than a few LIVE in size
Posted below is my System Info. Is there anything else I can do to make this work? It's very frustrating!
--------------- SYSTEM INFO ------------------------------------
Version of Lightroom: CC 2015.3 
License: Creative Cloud
Operating system: Windows 10
Application architecture: x 64
System architecture: x 64
Number of logical processors: 8
Processor speed: 3.5 GHz
Built-in memory: 32717,7 MB
Real memory for Lightroom: 32717,7 MB
Real memory used by Lightroom: 925,4 Mo (2.8%)
Virtual memory used by Lightroom: 1086,4 MB
Memory cache size: 0.0 MB
Maximum thread count used by Camera Raw: 8
Camera Raw SIMD optimization: SSE2, AVX, AVX2
System DPI setting: 96 DPI
Composition of the Bureau enabled: Yes
Exhibition: 1) 1920 x 1200
Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.
Graphic processor News:
GeForce GTX PCIe/970/SSE2
Check the supported OpenGL: past
Provider: NVIDIA Corporation
Version: 3.3.0 NVIDIA 359.00
Rendering engine: GeForce GTX PCIe/970/SSE2
LanguageVersion: 3,30 NVIDIA via the Cg compiler
The application folder: C:\Program Files\Adobe\Adobe Lightroom
Library path: C:\Users\Johnny\Pictures\Lightroom\Lightroom Catalog.lrcat
Settings folder: C:\Users\Johnny\AppData\Roaming\Adobe\Lightroom
(1) home canon Plugin
(4) HDR Efex Pro 2
(5) attachment Plugin Leica
(6) home Plugin Nikon
(7) perfect B & & W 9
(8) perfect effects 9
(9) perfect improve 9
(10) perfect photo Suite 9
(11) perfect Portrait 9
(12) resize perfect 9
Config.LUA flags: None
Map #1: Seller: 10de
Feature: 13 c 2
Video memory: 4008
Map #2: Seller: 1414
Device: 8 c
Video memory: 0
AudioDeviceName: Speakers (Realtek High Definition Audio)
Build: not initialized
GPUDevice: not available
I uninstalled Lightroom CC. renamed the Lightroom to my profile folder, rebooted the PC. Reinstalled lightroom CC, choose to create a new lightroom catalog, any of a local session of my C:\ Image folder. The behavior is the same. Lightroom does not remember previews and continuous 'loading' and make turn the wheel little whenever I click on an image of the band. It's crazy...
You're clicking on between images in the Strip to develop? The develop module does NOT use 1:1 previews. Those that are used only in the library. Develop, Lightroom must load the raw file and return each time, this isn't a good solution to quickly go through images to work to develop. It should take a few seconds to fully make a new raw image loaded it depending on the size of your images are. If you want to speed up switching to develop image there are solutions. One is a raw cache big camera, that you already use and secondly to disable acceleration of graphics card, which, if enabled, slows down the initial loading. Finally, you must ensure that you are the 2015.3 or the 2015.1.1, and that you do not have 2015.2. Version 2 had several bugs that could slow this process terribly.
15-20 seconds is extremely long for this process of loading in my experience. I can't get it to be slow on a much less powerful system than if the files are > 500 MB high resolution stitched tiff files. Not with RAW files (I pull a 24 Megapixel). If they are raw files, something is wrong. You have turned off the facial recognition?
I'm new to the community and it will probably show. So, I say sorry in advance for the flaws, I'll do. Since I am of German native language I need to translate it into English. So, I could use special terms wrong, but I'll certainly try to avoid this. Just keep in mind. And now my question:
I was running VMware Player 3.0 with VMware Tools installed and VMware VIX 1.8.0 installed on a host of Win7 Ultimate 64-bit. The Useraccount on the host has administrator rights. Guest operating system is WinXP SP3. Since I need two softwares of different recording/Dictation on my workstation and I could only one of them simultaneously open (which is very uncomfortable, when you need to change frequently), because those two were always challenging who got to use the microphone, I installed a second microphone (that only the application for the two contest) and then created a virtual machine to run the software second with one of the two microphones connected only to the prompt. (Directly/comfortably) to start the second software I created a. LNK shortcut file (and attached to the startmenu) who run the command
Departure of player "C:\Program Files (x 86) \VMware\VMware" t "C:\Users\USERPROFILE\Eigene virtual Computer\Recorder Windows XP Pro Windows XP Pro SP3.vmx VM SP3\Recorder VM.
with the recorder VM "VM Windows XP Pro SP3" opening the second software automatically (autostart).
This worked well, until I updated my VMware Player to 3.0.1. Since the update however, my shortcut file simply is unable to start the virtual machine. However, starting the virtual machine of VMWare Player normal window still works. By running the command mentioned above constitute the command line prompt, I got the information, this vmrun.exe could not connect to the host, due to an error, the specified version is not found, which probably means that the VMware Player.
P:\ & gt; "" Player t C:\Program Files (x 86) \VMware\VMware VIX\vmrun.exe "start"C:\Use ".
virtual rs\USERPROFILE\Eigene Computer\Recorder VM Windows XP Pro SP3\Record
ER VM Windows XP Pro SP3.vmx"
Unable to connect to the host.
Error: The specified version is not found
P:\ & gt;
I tried the VMware VIX update (from 1.8.0 to 1.8.1) without success. The errormessage even remains.
The three relevant paths for VMware Player, VMware Vix and the VM are spezified in the systemvariable path as follows:
% SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\; "" C:\Program Files (x 86) \VMware\VMware VIX ". "" C:\Program Files (x 86) \VMware\VMware Player. " "' Virtual C:\Users\USERPROFILE\Eigene computer; C:\Program Files (x 86) \QuickTime\QTSystem\
Today suddenly wrong?
Any help would be greatly appreciated.
Thanks in advance to one that solves the Enigma.
Meine VMs starte ICH mit dem VMplayer so:
The taskbar at the bottom of the screen.
If I hover over an open program (for example Live Mail), it appears like normal.
However, if I click on it to bring it to use, it does not appear.
This just started happening.
Can you tell us which laptop model you have and what operating system are you using?
Have you noticed this problem with some or every single application that you can start from the taskbar?
I can't drag and drop a screen between an and the other monitors, but when I open an email, it opens on the screen 2, but I can't seem to him.
This problem may occur because of the multiple display settings.
I suggest to change various display settings and check if it helps.
Keep us updated on the status of the issue.
Windows 7 message pop-up cigarette... "local area connection adapter does not work correctly. Problems related to the pilot experience or material"what the devil does that average and that the devil can do?
When I logged on this morning, Windows 7 gave me the following message... "The connection to the local network problems hardware or driver. For connection to the local network adapter does not work correctly. "My Windows offered solution was go using Windows. Help
Try to uninstall and reinstall the network adapter drivers.
Download the latest drivers from the card manufacturer support page.
Download the drivers and extract them to a folder of your choice.
In Device Manager, right-click on the adapter.
Click Update drivers and choose her browse my computer for drivers.
Choose let me a list of choices, click on disk and point to the folder with the drivers.
Computer network health.
Check the Device Manager for the entry of valid card of the wire.
If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.
Check network connections to make sure that you have a Local Area Connection icon/entry, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.
Connect you to the menu of the router from a work computer and make sure DHCP is on, and it is configured to assign IPs which can cover the number of computers that are connected (a bit more will be even better).
Turn off the computer and the router, reset the router and the computer.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
On the State of intellectual property.
TCP/IP and its variables usually look like this.
Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.
Typical TCP/IP status looks like this.
Description is the data of the card making.
Physical address is the MAC of the card number.
The xx must be a number between 0 and 255 (all xx even number).
YY should be between 0 and 255
ZZ should be between 0 and 255 (zz all the same number.)
The date of the lease must be valid at the present time.
* Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.
* Note 2 There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.
Also, make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Jack-MVP Windows Networking. WWW.EZLAN.NET
yesterday, I've updated the driver for my WIFI, with the driver found on the Toshiba support page. After installation, the Config Free utility does not work correctly. Indeed, the diagnosis of the doctor of connectivity us window briefly, just to replace it with the classic error message: cfmain.exe has encountered a problem and needs to close...
The details are
AppName: cfmain.exe AppVer: 184.108.40.206 ModName: venapi.dll
ModVer: 220.127.116.11 Offset: 000034df
Thank you very much for your support
I found this:
cfmain.exe - this is a component of the Toshiba network device. Network device Toshiba is Toshiba network device selector. For starters, this application requires a common Module of Toshiba ACPI and hotkey wireless.
Well, because of this description that I recommend you to reinstall the common modules and wireless keyboard shortcut utility
I can't refine edge to work in 2014 of CC. I select the mask, do the steps required to refine the mask and get a negative icon, a circle with a slash, and it does not work. I used refine edge before and it has always worked. This happened on fo
I can't refine edge to work in 2014 of CC. I select the mask, do the steps required to refine the mask and get a negative icon, a circle with a slash, and it does not work. I used refine edge before and it has always worked. This has happened for a while. Very frustrating!
HP Color LaserJet 2600n, Windows 7 64 bit
The red color does not print correctly, it of a weak orange and turn yellow on the edges.
The problem is, even if we just replaced the cartridge.
The other colors are fine.
I'm sorry. It's a consumer forum and your printer is a product of the company; would be better served on the forum planned for it. The business forum will be experienced in printers of business community members and expose the post more than members with the knowledge needed to answer.
Maybe you are looking for
Graphic of alias created for the folder is not transferred in the doc. Everything in batteries. Done in PS and saved as a JPEG. I did a lot. not sure why it does not work now. These are records that have elements in them and it only shows the st
Since I have downloaded 8.0.1 pinch zoom does not work anymore. How to solve this?
I reinstalled windows 7 on my computer and now the following drives will not install and I can't see anywhere on the driver page. PCI device Hardware/device ID: PCI\VEN_10EC & DEV_5229 & SUBSYS_1847103C & REV_01 SM Bus controller Hardware/device ID:
Found Google search on these forums where there are 42 answers for a poster whose SOLUTION to his question, ask the same question as my topic now. However, the response has been installing Windows 7. I have again improved PC Windows 8.1. I have HP
HelloHow are you?Please, I ask you?c:\CD one/f c:\one>Tree > c:\oneFileList.txt When I give this order of xp or 7 save the list of files that create Notepad inside has no Greek character as follows.AI?. FRM³ ³ ³ sx_117_aa? e? a? e? AE? ç ??? è????. F