Selection of DAQ PCI cards - pulse based on the position of the AO

I build a replacement computer for an aging instrument control system, and I'm trying spec a PCI card to use.  My line of sight is on the M6229, but I'm a little confused as to if she's going to do what I want.  We will use LabView 8.6 for the software, and RT module is not an option.

The question has been posted here in various forms, but I think that this iteration could be a little original:

The requirements of the program are:

-Two analog outputs are used to generate a raster 2D model, while the internal counter counts the pulses of preamp at each stage of the grid.

-The dwell for each point must be controllable by the user (ideally as low as 0.01 ms), and the count rate can go up to 5Mcps.

-The number of points x / y in the raster model is controllable by the user, a will have a maximum of 400 x 400 (160000).

At the moment I'm simulating a 6229 in MAX and written a model of Sawtooth on channel X and a linear ramp on the channel of Y.  The sampling frequency / can be deducted immediately requested size of dwell and pixel of the user.  I generate the set of values of xy 2D matrix and write to data acquisition.  I use voluntarily no more points that are necessary, because this application prefers one out an alias on the AO conducted, channels to maintain a separate position for each pixel in the detector.  Thus, for example, for a 100 x 100 pixel image with 1ms live per pixel, the quick scan signal is essentially a 100 Hz sawtooth, sampled 100 times at a sampling rate of 10 kHz.

However, the frequency of sampling for the pulse counter must be very high to follow with the input of the preamplifier signal.  I think that I can't have separate sampling frequencies for two separate tasks, so I'm left with a choice between creating an XY array unnecessarily large to match the sample for the pulse counter clock, or ask your question here

Does anyone have any advice? In the end, I want to make sure we buy the best equipment for the job, but as always, we are also interested in the best bang for the buck.  Is a map of the M series not up to this task?


Tags: NI Hardware

Similar Questions

  • Satellite 2450-101 Mini PCI card please

    I have a Satellite 2450-101, which is longer under warranty. I upgraded the memory and noticed a mini-pci slot with two waiting for a card antenna cables. I need a g card (the 3300 looks like a good bet). The manual refers to a mini-pci slot and the CD from the laptop comes with Atheros drivers for the same... I am currently using a PCMCIA card but want to spend money with Toshiba to get a good onboard solution. I called Toshiba who say that he is not a slot in my laptop... Please please don't refer me to a partner because I've never actually talked to one yet. Honest answer please... can I mount a mini-pci card... is the 3300 OK, and how do I join the cables (if this is difficult, I won't)...
    Thank you

    Hello

    I found information that your device is ready for the Mini PCI Wireless card. As you know on the wireless card there are two connectors that are marked of PRINCIPAL and auxiliary normally a white cable goes to the ESSENTIAL and a black to the auxiliary voltage

    Sorry, but I can't tell you exactly what wireless card will be the best for you. In my opinion, you should contact partner in your country. I'm sure they can give you correct information, which is compatible with your device and how much it will cost.

    Good luck!

  • Satellite 5200 903: Mini PCI card does not work

    Hello

    I am a user of one:
    Satellite 5200 903: P4 - M 2.2 / 256 + 256 DDR/60 GB/15 t SXGA + / DVD - R - RW / nV FX 5600/SFP/WIFI ready/XP

    My computer is a Toshiba Wirless lan Mini PCI Card.
    I installed the card a few years ago - everything worked great.
    In early 2006, I installed a new operating system (XP Pro + SP1, same system as before) because it was necessary.
    I installed all the drivers for the card of W - Lan, of course, the map worked in a good way (no driver incompatibility or other problems).
    But, and this is the reason of this topic here. It is not possible to connect my card to any hot spot. I tried with 2 different access points, but the result is the same. 'No connection Point found '.

    Does anyone have an idea of what to do or where I could look for failure? Is there maybe no special software required (I couldn't remember that I needed in my last installation special driver or software)

    If more information is needed, please let know me.

    (Sorry for the bad English, but it is not my first language.)

    THX for your help

    Hello Christian

    First your English is fine, and I'm sure that every user will understand what you want to describe.
    Back to your problem: the wireless card properly recognized and listed in the Device Manager?
    If so, please be sure that this card is enabled. Just that you should be able to see any wireless network.

    You n t need any special software. WIFI connection can be configured using settings in windows.

  • Remove a desktop USB 3.0 PCIe Card Questions in an HP e9200z

    Hello

    I have a:

    HP Pavilion Elite e9200z CTO desktop PC
    Model name e9200z
    Product AW017AV-ABA number
    Software Build 94NAv6PcA4

    Name of Microsoft Windows 7 Home Premium (64-bit) Edition
    Build number 7600
    Version of DirectX 11

    Motherboard
    System Board
    Chipset AMD RS780/RS880
    AMD SB700, SB710/SB750 Southbridge
    Box spring
    Manufacturer FOXCONN
    ALOE products

    BIOS
    The vendor American Megatrends Inc.
    Release Date 11/09/2009
    Version 5.03 BIOS string
    ROM size 1.00 MB

    AMD Athlon (TM) II X processor 4 620
    Name AMD Athlon (TM) II X processor 4 620
    Hearts 4
    Son 4
    Temperature C 22.00
    The current 2.60 GHz speed
    Multiplier x 13.0 (4.0 - 13.0)
    Features (+) MMX, 3DNow! (+), PSE36, x 86-64, SSE, SSE2, SSE3, SSE4A, NX, SVM
    L1 Cache of Instruction 4 x 64.00 kB
    L1 Data Cache 4 x 64.00 kB
    L2 4 x 512.00 KB of Cache

    Video card
    NVIDIA GeForce G210
    Adapter Chip Type GeForce G210
    512,00 MB video card memory
    Video card in the BIOS Version 70.18.9.0.10
    Driver c:\windows\system32\drivers\nvlddmkm.sys
    8.17.12.5936 driver version, 08/08/2010

    I installed a Western Digital SuperSpeed USB 3.0 PCI Express (PCIe) card. Then I discovered that my diet was already within its nominal capacity output when the computer was shipped. Now, whenever I have a USB device that is connected to the computer, it didn't matter if it is a USB 2.0 or 3.0, the chart shows a decline in the quality whenever I would like to start or restart the computer. If I start the computer without any device USB 95% of the time it would start the graphics in the way it was supposed to be. With the clarity of high definition. I know that I must remove the PCIe card, but my questions are:

    1. If I just uninstall the drivers and let the PCIe card in place if it will still support power?

    2 should I replace the power supply, after you fix this problem?

    3. is there a way to test the power subsequently to ensure that it is correct?

    4. If the withdrawal of the PCIe card is the best method. What is the procedure to remove? Out the PCIe card and uninstall the drivers through the Device Manager? If so, in what order? Card PCIe controller driver, driver finally hub?

    5 leaving the drivers installed and just released the PCIe card be a better idea? If ain't broke don't fix it...

    6. If I let the drivers installed, but get out the PCIe card drivers would say the power supply to power again?

    7. If I take the PCIe card that you call the part that I'd buy that connects to the hole in the back of the tower and what size would I get?

    Thanks for your help! Even if you can only answer some of my questions, feel free to jump in.

    Replacement of the power supply is a common practice. It's a question that is asked constantly. If your power supply is at the maximum, then replace it. It is not all that difficult to accomplish. Even a slight upgrade with a 85% effiecient PSU is a plus.

  • PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI

    Hi friends,

    I have PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI installed on the Windows XP desktop, that connected to the deducted Mikron camera.

    Recently I spend my Labview to 8.6, but the Mikron camera installation software does not work.

    How can I solve the problem?

    Anyone have the installation software (PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI)?

    Any suggestion is appreciated.

    Thank you

    Jack

    jackp6,

    For the 6205E you will need to download an install the Drivers OR-DAQmx which you can find here:

    NOR-DAQmx

    http://Joule.NI.com/nidu/CDs/view/p/ID/2214/lang/en

    The 1409, you must NEITHER IMAQ drivers that are included in the following the Acquisition of vision available here:

    NEITHER Vision Acquisition Software 2,010.08

    http://Joule.NI.com/nidu/CDs/view/p/ID/2137/lang/en

    Please let us know if you have any other questions.

    Kind regards

    Sam K

    Technical sales engineer

    National systems

  • BNC-2110, 6023E PCI card and Labview V9.0: is the sensitivity of data acquisition (change more little detectable voltage) 0.002V?

    BNC-2110, 6023E PCI card and Labview V9.0: sensitivity of data acquisition (change more little detectable voltage) is 0.002V

    Hi, I use the software/hardware above to read a voltage of a potentiostat world Precision Instruments No..

    I'm trying to record changes in voltage as low as 0.0003V but using the wizard DAQ, I seem to be limited to a sensitivity of 0.002V.  This is the limit of real sensitivity or have I missed something?

    Any help would be greatly appreciated.

    Hi DCAM77,

    Thanks for joining the forums!

    The PCI or 6023E has a 12-bit ADC.  In other words, it can make the difference between 4096 (2 ^ 12) different levels within the range of cards.  The card you have has a selectable range by ± 10 V, ± 5 V, ± 500 mV or ±50 mV software.

    This means that the minimum detectable variation will be 4 mV, 20 mV, 244 µV or 24, depending on the chosen range µV.

    You should be able to use the ± 500 mV or ±50 mV to get the least significant bit (LSB) value, you need, even if it means that your signal is located between these values.  If not, then you need to consider other materials to the application, or the addition of external circuits across the signal.

  • Wireless Mini-PCI card does not work after installing it in socket

    I have laptop satellite A30, it has a plug for a mini PCI card.
    I buy a (chipset intel) and install the driver on the PC.
    The problem that I can not power on the wireless?
    There is a switch for this perpose on the side of the laptop, but when I change nothing happen!
    Also press the Fn with F8 button but nothing is also happening.
    I discuss this issue with other friends, they told me that there must be something in the BIOS and activiate/deactiviate the wireless, but I can't find anything related to map wireless in BIOS?
    For this I need your help
    Concerning

    Hi guys,.

    THX starbucks for the post, but I must correct you:

    As the wireless card in the mini-pci card slot is the only one, there is NO onboard wireless card. So it can't be anything to be disabled except the pci socket.
    And regarding the problem: perhaps the card is not compatible with this machine. I suggest to buy a card based on the atheros chipset because they are known to work VERY well (in fact they work) in almost all brands without bigger problems and they do in computers laptop toshiba.

    If the card was not recognized then another card must be installed-> atheros and not INTEL chipset

    Welcome them

  • Realtek Semiconduct Corp. - storage - Realtek PCIE card reader

    The update for this program (if that is what is is) due to lack of care. Oh I get it to update properly? I restarted my computer and still the update will not work.

    I have a HP DV7t

    Realtek Semiconduct Corp. - storage - Realtek PCIE card reader

    Download size: 1.6 MB

    You may have to restart your computer for this update is taken into account.

    Update type: Optional

    Updated software Realtek Semiconduct Corp. storage released in January 2011

    More information:
    http://winqual.Microsoft.com/support/?DriverID=20424134

    Help and Support:
    http://support.Microsoft.com/select/?target=hub

    Hello

    Optional updates of Windows sometimes go wrong so I just click with the right button on the driver in option and select "Hide Update" to avoid what he constantly offered.

    Kind regards

    DP - K

  • Card PCI-6259 is compatible with the Dell Precision 390?

    Hi all

    I need help in answering this question.  I want to buy a better computer for my data PCI-6259 acquisition card.  I tried to search to see if the card is compatible with the PC and there's previous numbers with this set-up before other users.  Do you have a link to the list of the DAQ cards with tested PC configurations?  I want to just make sure that when I buy the computer, everything will work without problem because I only have one shot at this.

    Thanks to all in advance.

    Kind regards

    justdomechanicalengineering

    Hello

    We do not have a link to specific DAQ board/PC pairings, but the specifications for the Dell Precision 360 indicate that she has three ports PCI 5V which must be compatible with your PCI-6259.

    Best,

    Dan Nelson

    Technical sales engineer

  • What is the correct USB 3.0 PCIE card for Z800?

    I am looking to buy the correct USB 3.0 PCIe card for a Z800, but I can't find any HP thru. Anyone has the info > 12 and 60 cards HP dollar on EBAY, but I don't know if those who are good.

    Hello

    Based on the following specifications, the machine has a lot of options:

    http://h18000.www1.HP.com/products/QuickSpecs/13278_na/13278_na.PDF

    You can buy 1 port card, map 2 ports, card port 3 or even 4 ports card such as:

    http://www.StarTech.com/cards-adapters/USB-3.0/cards/2-port-PCI-Express-SuperSpeed-USB-3-card-adapter~PEXUSB3S2

    You should check the slot to get the support of the card right.

    Kind regards.

    PS eBay is another story, you can buy some card dollars.

  • How do we uninstall Realtek PCIE Card Reader

    Hello I am running on windows 7, I will try yo upgrade to 8 but it says I have to uninstall Realtek PCIE Card Reader. but I can not find it to uninstall. I checked the driver manager, that I still couldn't find it

    Why did you uninstall the card reader? You can upgrade to Windows 8 without uninstalling the card also reader.

    If you need to uninstall the card reader, are going to start-> type devmgmt.msc-> press on enter. Expand controller IDE ATA / ATAPI-> look for Realtek PCIE Card Reader. Double click it-> go to the driver tab, click on uninstall (select remove the software for this device to uninstall the device entirely) to uninstall the device.
    Note: Several drivers may exist (like SD, xD, MemoryStick controller controller). Uninstall them individually.
  • R310 Dell: What do the unknown fans with PCIe cards?

    Hello

    I'm looking to replace my aging modified PE2950 gen 3 with a server that is more effective, while maintaining 2 power PCIe slots.

    My use case is not particularly normal in that it's for a home installation and the server will be install re-usable to serve my ad and TVServer for home.  Therefore, I need to be able to add two DVB - S2 cards on the chassis to receive satellite service.

    I know that with some other manufacturers, installation unknown PCIe cards cause their fans go nuts as they assume that the maps are overheated.  How Dell servers in this situation, in particular the R310?  The R310 seems to satisfy all my needs and I think it would be perfect.

    In addition, until I removed the Perc 6 / I of my R410 it was quite noisy, how the R310 Dell price for the fan noise?  The system, with all remains will be in the basement in a rack Assembly away from the living areas. I think I could deal with what up to all about 60dba but especially because it would be too noisy... I understand that 1u rack systems are not designed to be quiet around but a few real comments here would be great.

    Any help that you can provide, or direction is appreciated.

    Thank you very much

    Chris

    Hello

    Bernos
    I know that with some other manufacturers, installation unknown PCIe cards cause their fans go nuts as they assume that the maps are overheated.  How Dell servers in this situation, in particular the R310?

    PCIe cards unknown/3 rd party causes servers 13 g and likely all generations run fans to its maximum SPEED, regardless of the temperature. To my knowledge, it is new with our servers to 13g. I don't think previous generations like 11g detected what exactly was settled in the PCIe slots. They changed fan thresholds based on whether or not the slots have been filled not based not what was in the slot.

    I can't say with certainty what will be the decibels. We do not have a list of all the possible configurations and the decibels. The highest specified configuration in my Datasheet does not include additional PCIe cards, but the dBA listed under stress with this population is 43. I can't guarantee that the system will operate less than 60 dBA, but I suspect that it will do so.

    Thank you

  • DVI PCI Card/s for G3 minitour

    I am a new Member of this forum and I hope that someone has the necessary answersI. I have a Power Macintosh G3 Beige minitour @ 333 MHz, and I'm on OS 8.5.1. There is a reason, I must stay with OS 8.5.1.

    I am wanting to know if there is a Dual-DVI PCI card that will work in this machine, so I can run two monitors via DVI in order to get a higher resolution than is available with VGA. My understanding is that VGA tops out at 1280 x 1024 and I need just a little more.

    If there is not an available Dual-DVI card that will work with my setup, how about two single DVI cards? If, by chance, there are two ways, that would be better and two monitors can also..., run off PCI cards without involving the port of regular monitor of the factory. If the port of the factory to be used, is there an adapter (or adapter cable) him/DVI.

    I know it's several questions, but get them out of here, in my first post may save some back.

    Thanks for any help, Tom

    Hi & welcome!

    In fact, VGA will give you more resolution than DVI.

    Radeon 7000

    The 32 MB memory DDR (Double Data Rate) will also help, allowing your computer to display very high resolutions up to 2048 x 1536 at 60 Hz if your analog monitor supports. Resolutions up to 1600 x 1200 are supported using digital flat screen, depending on the individual abilities of your LCD monitor.

    http://www.Macworld.com/article/1004789/radeon7000.html

    http://www.xlr8yourmac.com/graphics/radeon_7000_feedback.html

    There are faster cards still better, but more rare and the fastest I had were Formac cards, can have a couple somewhere here.

  • Satellite A30 - 303 install wireless mini PCI card internal

    Hello
    I am installing a PA3300U (Atheros) mini PCI WiFi internal card and have a basic question that I hope someone will be able to answer. There are two cables, white and black (under the cover of the wireless card on the case) which I suppose are for the internal antenna. The question is where do these attach to on the mini-PCI card (unfortunately I have no instructions for the card mounting)?
    I'll be very grateful for any assistance with this.
    Best regards, Dave.

    Hello

    I don't actually see one of the Atheros cards, but on other brands, there are two connectors that are marked with the HAND and to THE.
    A white cable normally goes to the HAND and a black to the auxiliary voltage

    BR

    Tom

  • SP A10 with mini PCI card

    Help!

    Had great success with Toshiba would like to use it in wireless mode. LAN mini PCI card switch have still can not find the drivers on the computer to enable.

    Any suggestions

    Thank you very much

    Steve

    Hello

    What type of card LAN Mini PCI do you own?

    Please publish the name of the vendor, the name of the map and so on!

    Goodbye, Meier

Maybe you are looking for

  • HP Pavilion 15-AB227TX: replacement battery

    I am looking to buy a HP Pavilion 15 - AB227TX and I am concerned about what will happen when the battery dies because it is not an external battery, which can easily be removed and replaced.  Is it possible to replace the battery in this model?

  • Get specific references for all controls

    Using slightly modified code from here, I'm generating a table of references of control on my main façade which is then transmitted to a number of subVIs. Although this feature does not work, it would be preferable to obtain specific references to co

  • Print web page

    My V725w printer refuses to print from a web page, example today I pulled a credit report.  He has a box 'Print', but after printing box comes nothing happens.  I reinstalled the printer but still won't print a web page.  Print emails and Word well. 

  • There is a problem with your computer works to automatically turn off this message

    [1021 / 023637:WARNING:backend_impl.cc (1609)] Messed up entry found.[1021 / 023637:WARNING:backend_impl.cc (1895)] Destroying the invalid entry.

  • How to download acrobat 9 pro for mac?

    How and where to download acrobat 9 pro for mac? I already bought with Suite CS5 serial number