Selector list component does not


Flex and AS3 have two different configurations. You can swap the non Visual class, but you cannot use their inconstant objects display without use a workaround and find a good ground. I think that this is the problem that you run in. qnx classes were compiled with the AIR sdk not flex. theres a good luck if you try to use the QNX display objects in flex, they will fail just as you saw that a failure. also you found that Flex you does not use the addChild() method as in strict as3. the equivalent is the addElement() method.

Here is a blog post about the work around. Keep in mind that the swc file is old and that it contains no hardware update sdk. but he's going to explain a few things:

http://Renaun.com/blog/2010/12/using-MXML-with-QNX-UI-components-for-the-PlayBook/

you will need to use a work-around as described in the link or use strictly flex (mxml) display objects type in your flex projects. If you want to make the best use of the qnx display components will be strictly using as3 in your project. hope that sheds some light. Good luck!

Tags: BlackBerry Developers

Similar Questions

  • HP Officejet Pro L7700 Series: HP CUE scanning flow component does not work HP C8192A

    After being able to scan with my HP Officejet Pro L7700 Series a few years, I suddenly surprised by the message "HP CUE-scanning flow component does not respond," it is impossible for me to analyze using my WiFi connection. Scanning to a USB is the only remaining option. I used HP Print and Scan doctor, but that was of no use.

    What can I do else?

    Hi @Andries49

    Andries49 wrote:

    Dear Sunshyn2005,

    Thank you for your response. It did not solve my problem, however, as I can't find the 'hpqscnvw"- file. The only file (exec) that 'sc' in its name was "hpiscnapp", but a double click that does not start the digitization program.

    When you reply to a message on the HP Forums, please check that you use the button on the web page just below the message you are replying to.

    Please follow the following steps to perform an uninstall of compression and a new facility;

    1. Hold down the Windows Logo key () on the keyboard and the 'R' to open the dialog box run, type %temp%
    2. Delete all files and folders in the temp folder. Choose Skip if all pop ups seem to say all files cannot be deleted
    3. Download the software and choose Save as, save to desktop > OJProL7X00_Full_14.exe
    4. After downloading software and extracts, reopen the temp folder, use the instructions in step 1.
    5. Locate and open the folder starting with 7z (example: 7zS2356)
    6. Open the folder Util
    7. The CCC folder
    8. If you have a computer HP run the L3uninstall.exe. If you have annon HP computer run the L4uninstall.exe
    9. Once the uninstall is complete, reboot the computer
    10. Follow these steps to reset the registry settings and options for Windows Installer.
  • Tuerdo tunneling Pseudo-Interface and ISATAP adapters is listed as does not.

    Original title: tuerdo tunnel pilot Pseudo-Interface

    Does anyone know the tuerdo tunneling Pseudo-Interface of what?  It seems that it is a Windows network adapter any and it is listed in the Device Manager tree.  There is also a Microsoft network adapter: isatap listed.

    Two of these adapters are listed as does not and when I try to update the drivers, nothing is found for either.

    They must be uninstalled, or what?

    Hello

    See if that helps you.

    "On a Windows Vista-based computer or on a computer Windows Server 2008, Microsoft ISATAP adapter appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message"

    http://support.Microsoft.com/kb/932520

    RESOLUTION

    "You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly. »
     
     
    See you soon.
  • Update zone drop-down list programmatically does not update its local variable

    Hi all

    I followed a Web site tutorial OR and programmatically change the items in a drop-down list box. It worked successfully, but not for local variables. Local variables while keeping the elements that had it before.

    Any suggestions?

    Thank you!

    You must update programmatically property value to change which returns the local variable, the value that you will wire does not match with one of the array strings.

    Maybe you need to do something like this to update your value to change the 'Two' to 'five '.

  • Problem HP 1200 inkjet - printing is listed, but does not print

    My HP psc 1215 all-in-one prints jobs even if they are present in print lists:

    • Reinstall HP printer and troubleshooting in Windows 7 software (updated drivers) the situation has changed...
    • It shows a 2nd icon HP psc 1200 series, which shows a warning sign which does not disappear after troubleshooting, but using it I can at least to analyze something and import them into my documents folder.
    Kindly help
    DAE

    This model is not supported under win7, by HP, so any HP printing software would not work.

    The driver is obtained via windows update.

    If the devices and printers display 2 * series PSC, uninstall them two, reboot, reinstall the printer

    http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01796879&CC=UK&DLC=en&LC=en&os=4062&Product=412187&sw_lang=

  • How to pin a point to move the list that does not appear in the common?

    http://www.eightforums.com/attachments/F1/F11/8991d1348615884-jump-lists-back-up-restore-Windows-8-file_explorer_jump_list.jpg

    I have file Explorer related to my taskbar. In the jump list, I can able to locate an element in the common area. But necessary file appears automatically on the point frequented it take time. I don't know how windows take to put inside of the frequent. With waiting for that appears automatically, is there a way we can pin an item that does not appear in the jump list frequent list?

    http://www.eightforums.com/attachments/F1/F11/8991d1348615884-jump-lists-back-up-restore-Windows-8-file_explorer_jump_list.jpg

    I have file Explorer related to my taskbar. In the jump list, I can able to locate an element in the common area. But necessary file appears automatically on the point frequented it take time. I don't know how windows take to put inside of the frequent. With waiting for that appears automatically, is there a way we can pin an item that does not appear in the jump list frequent list?

    The answer depends on what type of element you want to pin.  The only type of element you mentioned being a folder, you can easily do what you're wondering now and does not need to wait for a later version.

    In the 8 Windows desktop, when you drag an executable file (or shortcut) on the taskbar, a message appears that says "PIN to the taskbar.

    If you drag a document file (or a shortcut), the message will say "pine [associated application]"-in other words, "[name of the default browser] pine" for a html, "Pin to Notepad" file to a txt file, etc..

    For a folder, File Explorer is the associated application.  Therefore, if you open a file Explorer window, look for the desired folder and drag it to the taskbar, the message that appears is "PIN to the file Explorer."  Just click on it, and it will appear in the jumplist FE, above the frequent places, in a separate section called "Pinned".  You can drag things and down from there to order at your leisure.

    (The Control Panel, even if it is displayed in FE as 'File system', only let you pin on the desktop, for not not FE jumplist.)  There may be other special cases like this; I don't know, but it works usually as I've described, including for other system folders.)

    Just to be clear, I am a new user of Windows 8, far from being an expert.  I only know how it works because I heard today by trial and error.  So there may be more to what I can't help with.

  • Title chapter works on numbered list, but does not redial in Table of contents

    I'm doing a long document and put each chapter in a separate file.

    I use the chapter number variable in the title of the chapter and bullet styles is used in the heading and numbered lists set to ^ h ^ #^ t. It works very well in all the chapters.

    For example:

    Chapter 1

    1.0 header of a zero with the numbered list style

    Copy copy copy

    1.1 header a numbered list style

    Copy copy copy

    1.2 header a numbered list style

    and so on

    Chapter 2

    2.0 header with zero style

    Copy copy copy

    2.1 header a numbered list style

    Copy copy copy

    2.2 header a numbered list style

    and so on

    BUT when I create the table of contents and want the header of those who are listed, they appear like this

    1.0 header of... 1

    1.1 header... 5

    1.2 header of... 7

    1.3 header of... 9 (this should be the 2.0 header)

    1.4 header of... 12 (it should be 2.1 header)

    1.5 header of... 13 (this should be the heading 2.2)

    How to make the table of contents list the correct numbering, using the chapter title variable that is used in each file in the book?

    Thank you

    Maryann

    Okay, I think that I have now.

    1. Open the table of contents
    2. Layout > Table of contents
    3. Changing the shape of paragraphs numbered to include the full paragraph, OK
    4. If it does not, you will have duplicate numbers, but the new set is correct.
    5. If so, window > Styles
    6. Edit the table of contents and change the Type of list to none.
    7. Update the table of contents once more

    Looking forward to hear words that's it.

  • MAF List view does not display an arrow at the far right image

    Hello

    I was working with the list of CRG Oracle view to create a page of the AMX.

    When I was with to create ListView data control, this isn't the display ar the right end of the list of the arrow.

    I have used showLinkIcon = 'true' also to display the link icon, but does not display is not the icon.

    Here's my AMX page for reference.

    <? XML version = "1.0" encoding = "UTF-8"? >

    " < amx:view xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "xmlns:amx =" " http://xmlns.Oracle.com/ADF/MF/AMX "" "

    ' xmlns:dvtm = ' http://xmlns.Oracle.com/ADF/MF/AMX/DVT "> "

    < amx:panelPage id = "pp1" >

    < amx:facet name = "header" >

    < amx:outputText value = "List of reports" id = "ot1" rendering = "true"

    inlineStyle = "color: Navy;" text-align: center; make-weight: bold; "/ >

    < / amx:facet >

    < amx:tableLayout id = 'tl2' width = '100% ' inlineStyle = ' color: ActiveCaption; "borderWidth ="0">

    < amx:rowLayout id = "rl3" >

    < amx:cellFormat id = "cf4" width = "85%" >

    < amx:panelFormLayout id = "pfl2" >

    < amx:selectOneChoice value = "#{pageFlowScope.selected}" label = "#{' ' groups :'}" id = "soc1"}

    valueChangeListener = "#{pageFlowScope.ReportControlAction.onGroupChange} '"

    inlineStyle = "color: Black;" make-weight: bold; ">

    < amx:selectItems value = "#{bindings.groups.items}" id = "si1" / > "

    < / amx:selectOneChoice >

    < / amx:panelFormLayout >

    < / amx:cellFormat >

    < amx:cellFormat id = "cf5" width = "15%" >

    < amx:commandLink id = action = "#{"cl1"pageFlowScope.ReportControlAction.onClickOfGroupChange}" >

    < amx:image id = source="/Images/go.png"/ 'i1' >

    < / amx:commandLink >

    < / amx:cellFormat >

    < / amx:rowLayout >

    < / amx:tableLayout >

    < amx:listView styleClass = "listView-adfmf-insetList" var = "row" value = "#{bindings.reports1.collectionModel} '"

    fetchSize = "#{bindings.reports1.rangeSize} '"

    selectedRowKeys = "#{bindings.reports1.collectionModel.selectedRow} '"

    dividerAttribute selectionListener = "#{bindings.reports1.collectionModel.makeCurrent}" = "reportType" "

    dividerMode = 'all' showMoreStrategy = 'autoScroll' bufferStrategy = 'viewport' id = "lv2.

    collapsibleDividers = "true" showDividerCount = "true".

    inlineStyle = "vertical-align: middle;" color: gray; font-size: small; ">

    < amx:listItem id = action = "#{pageFlowScope.ReportControlAction.displaySelectOption"li2"} '"

    showLinkIcon = "true" >

    < amx:tableLayout width = '100 percent' id = 'tl1' borderWidth = "0" >

    < amx:rowLayout id = "rl2" >

    < amx:cellFormat width = '26px"rowSpan ="2"id ="cf1"halign ="center"valign ="middle">

    < amx:commandLink id = action = "#{"cl2"pageFlowScope.ReportControlAction.onClickOfPinReport}" >

    < amx:image id = "i2" source="/Images/pinandadd.png"/ >

    "< amx:setPropertyListener id = from =" #{row.name "spl1"} "to =" #{pageFlowScope.reportName} ".

    type = 'action' / >

    < amx:setPropertyListener id = from = "#{row.description"spl2"} '"

    to = "#{pageFlowScope.reportDescription}" type = "action" / > "

    < amx:setPropertyListener id = from = "#{row.id"spl3"} '"

    to = "#{pageFlowScope.selectedReportID}" type = "action" / > "

    < amx:setPropertyListener id = from = "#{row.isParameterized"spl4"} '"

    to = "#{pageFlowScope.isParameterizedReport}" type = "action" / > "

    < / amx:commandLink >

    < / amx:cellFormat >

    < amx:cellFormat height = "28px" id = "cf2" halign = "DΘmarrer" valign = "middle" >

    < amx:outputText value = "#{row.name}" id = "ot4" inlineStyle = "font-size: x-small; color: Navy; "/ >

    < / amx:cellFormat >

    < / amx:rowLayout >

    <!-< amx:rowLayout id = "rl1" >

    < amx:cellFormat width = '100% ' halign = "DΘmarrer" valign = "middle".

    inlineStyle = "text-align: left;" exceeding capacity-wrap: break-word; ">

    < amx:outputText value = "#{row.description}" id = "ot3" "

    inlineStyle = ' color: gray; " font-size: x-small; Police-weight: lighter; text-align: left; make-style: italic; "/ >

    < / amx:cellFormat >

    < / amx:rowLayout >->

    < / amx:tableLayout >

    "< amx:setPropertyListener id ="spl5"from =" #{row.name} "to =" #{pageFlowScope.reportName} "type ="action"/ >

    "< amx:setPropertyListener id = from =" #{row.description "spl6"} "to =" #{pageFlowScope.reportDescription} ".

    type = 'action' / >

    "< amx:setPropertyListener id = from =" #{row.id "spl7"} "to =" #{pageFlowScope.selectedReportID} ".

    type = 'action' / >

    < amx:setPropertyListener id = from = "#{row.isParameterized"spl8"} '"

    to = "#{pageFlowScope.isParameterizedReport}" type = "action" / > "

    < amx:actionListener id = "al1" type = "swipeLeft".

    Binding="#{pageFlowScope.ReportControlAction.onSwipeToPin}"/ >

    < / amx:listItem >

    < / amx:listView >

    < / amx:panelPage >

    < / amx:view >

    Can someone please help me to solve it.

    Thank you

    Ajoy Sinha

    According to the following thread: https://community.oracle.com/thread/3592578 ... On Android, it is normal that the arrow is excluded and available on iOS, to meet the relevant guides to style of the different platforms.

    CM.

  • Adobe Creative SDK - guide "to using the Image Editing Component" does not open

    Hello everyone, I'm trying to open Adobe Creative SDK for Android, but it does not (tried it on several browsers). When I press on "to using the Image Editing Component", it is loading and loading, nothing happens. Can you help me? I'm new here, maybe I need to do something first? I just need this component for Android, nothing else, but I don't know how to install it without a guide.

    .Error.png

    Please post your query on: Adobe Creative SDK

  • The selection list value does not change when the page is sent

    Hi all

    I have a selection list that acts as an entry for the report. the page is submitted using a button.
    The button uses the branch option "redirecting to page in the application. I select the same page.

    The problem is when I change other values in the value list always takes the first value

    I want to know if the problem is with the key or select list. What should I do about it?

    Concerning
    REDA

    Renon wrote:

    I tried your suggestion. Now that I ask, is the report is expected to show only when the button request is passed. I read to present the action of page the name of the button acts as a request.
    so now my report status is request = Expression1 and value of expression1 takes GO tell button name.

    The report does not appear but. I checked the session. It has the value of the selection list and the page is submitted as but the report is not displayed.

    ASK is disabled before the exposure treatment page unless it is set in a branch or a URL, this is why it has no value when they are referenced in your State in the region.

    Set the attribute request in your branch for & request to make available at the course to see the page the current value of the demand for treatment.

  • Selection of drop-down list box does not appear

    I've read several display on this site and others.  I can't find the right solution to get the drop-down list box to work.  I publish for Flash player 10 and AS 2.  The final file will be imported into an Articulate/PPT file.

    I'm simulating a form that my audience must fill.  2 text fields, I use a drop-down list box to select the appropriate entry.  If they leave the screen of the form, I need save their answers, so they need not start from the beginning.  I use global variables.

    My problem occurs when I try to fill the drop-down list using the previously selected public response box.  I tried to use setSelectedIndex.  It works insofar as the choice highlights in the drop-down list box, but the actual selection does not appear in the text box.  What I do pay Combobox.text = selection?

    just assign the selectedIndex property.

  • ATER installation Personas 1.6, modules in the drop-down list tools does not

    I installed Brand Thunder custom browser and after installing Personas 1.6 I noticed that instead of show 1 big boom it shows 2 small perch. To try to resolve the problem, I thought I'd try removing the add-on, however clicking on Add ons causes nothing to happen.

    In the background I have no script running and this keep appearing:
    Script: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623
    Pressing continue causes Firefox to hang and press on stop the script does not work as it just comes back once again.

    Try to use questions to troubleshoot Firefox in Safe Mode to uninstall the add-in, or if it does not you can uninstall it manually. For more information, see http://kb.mozillazine.org/Uninstalling_add-ons

  • &lt; af:inputFile &gt; component does not work in IE9.

    Hi all

    I use JDeveloper 11.1.1.4.

    I tried to download the documents by using the < af:inputFile >. It works fine in firefox and chrome. But in IE9 if I try to download a document it does not work it's just refresh the browser again.

    My Jspx Codes:

    < af:panelGroupLayout id = "pgl2" layout = "horizontal" >

    < af:inputFile label = "Upload File" id = "if1.

    Binding = "#{managedBean1.inputfile} '"

    value = "#{managedBean1.file}" / >

    < af:commandButton text = "Upload" id = "cb1" partialSubmit = "true" / >

    < / af:panelGroupLayout >

    My bean Codes:

    private RichInputFile inputFile;

    file UploadedFile private;

    {} public void setInputFile (RichInputFile Fichierentree)

    this.inputFile = inputFile;

    }

    public RichInputFile getInputFile() {}

    return inputFile;

    }

    {} public void next (file UploadedFile)

    This.file = file;

    }

    public UploadedFile getFile() {}

    return the file;

    }

    Thank you

    David

    11.1.1.5 (and pre-release 11.1.1.4) has a bug in af:inputFile with IE 9. Upgrade to 11.1.6.

    Refer

    File download is supported on IE9

  • Global selector. AFFieldTextDisabled does not work

    The statement by styles on the global selector. AFFieldTextDisabled do not have text entry components disabled such that implies the selectors for document Skinning ADF Faces components.

    Can someone please clarify if I use this selector incorrectly or if you managed to make it work.

    I could not find any material indicating a problem or another implementation of the. AFFieldTextDisabled selector.

    I tried a simple application customized skin and selector AFFieldText functions as expected, but the following global style selector definition only changes not the style elements of input text disabled.

    . {AFFieldTextDisabled}
    background-color: Red;
    }

    Thanks in advance

    Eddie

    Here you can find all the css files that use adf:

    /oracle_common/modules/Oracle.ADF.view_11.1.1/ADF-richclient-impl-11.jar/ADF/styles

    Most of the css is simple-richcomponents - desktop.css, and the rest is in other files depending on the skin that you extend.

  • I can't uninstall Thunderbird to my Windows programs "Uninstall list"; Why does not uninstall and be removed from this list?

    Very frustrating... under windows ' programs/uninstall a program "list, Mozilla Thunderbird is still listed AFTER that I have removed completely (I thought) from my computer. I clicked on 'uninstall' several times and nothing happens. I can't take the fact that Mozilla has set it up so that it can apparently be deleted from this list... What is everything? I tried to research the problem, even by using your Web site without success. All what I want to do is get out of my list to uninstall/change. I used this program AND will not use it. I don't want this program on my computer/list period. I would appreciate your help.

    It is a problem with the management of Windows applications. Mozilla does nothing to interfere with the installation/uninstallation process.

    You could re - install Thunderbird so re-synchronization of the list of applications, then uninstall again, or you could use a utility to remove from the list.

    A search of thunderbird.exe will confirm whether or not it was really deleted, but you may need to disable all the fool-proofing that implement Microsoft for not to see the true state of the file system; Configure to display hidden files and the extensions of file to start.

    Thunderbird is almost independent. You are free to delete manually the folder that the application resides in if Windows fails to uninstall it for you, but that will not solve the incorrect appearance of thunderbird in the list of installed applications.

Maybe you are looking for