Send warning message when the iPads are connected?

Similar Questions

• MacBook randomly landed volume when the headphones are connected.

  Hey,.

  There is something wrong with my MacBook. When I plug my headphones, the Mac randomly landed the volume at any time. I thought the keyboard can be broken, but it doesn't happen when the headphones are connected so it may be a problem with the software (I think?). Has anyone experienced the same problem? Do you know how to fix this?

  My Mac is the MacBook Pro 15 "retina (mid-2014) running the El Capitan 10.11.6

  Please try resetting the memory NVRAM and SMC.

  Reset the NVRAM/PRAM memory.  http://support.Apple.com/kb/PH18761

  Reset the SMC. Choose the method for "If the battery is good behaviour."

  https://support.Apple.com/en-us/HT201295

• Internal speakers work but no sound when the headphones are connected.

  Internal speakers work, but no sound when the headset is connected Mr. fix gives a clean and level flight controlpannel indicator report / sound show sounds present but no sound on 3.5 mm jack audio 6.0 vista Home Basic travel mate acer 2480 laptop.

  Ive seen to be a common problem and have tried everything short of putting my computer or the cabel in the freezer for this problem, although I had an old pair of computer speakers that the power of the headphone plug in my garage-30 and a jack 3.5 cold didn't help.

  Most recent driver realtek audio and Manager running audio acer, everything seems fine all levels on and not cut anything off
  Lists of control pannel/sound/speakerproperties
  control information
  Realtek High Denifnition
  Reatek'a

  Jack information
  LR ATAPI internal ATAPI
  LR 3.5 mm Jack (will disappear if not plugged headphones\auxcabel)

  some levels are muted
  Advance tab default settings
  quality of studio 24 bit 48000 Hz

  boxes of exclusive mode checked (when it is disabled, that no sound was heard)

  Information appears a jack was pluged into and when unplugged.

  the computer knows its their and it shows his work but ive tried several pairs of headphones, including the new ipod with the remote, I tried an old pair of speakers that have no other energy source that 3.5 mm cord all work witch on my i pod, I also tried pluging in a splitter first and also an adapter to use a guitar cord pluged amp in an another apapter back down to 3.5 mm a little stupid and redundant but I didn't lie when I said I TRIED EVERYTHING I could think maximum\ read forums\ many watch on youtube.

  computer repair guy told me that fault call manufacturing equipment but guaranteed was 2 weeks upwards.
   
  I do not think it is a matter of hardwear tho and am convinced that it can be resolved is so close to work, I'm sure there must be a setting or patch or codec sumthing that will correct the problem, but it's my first (LIRA) ask for help.

  With frequent this problem or other similar appear from what my research has shown that I don't know that it can be resolved, or millions of laptops with drivers realtek audio hd are all defective.

  My next try is an external usb sound card. I tried already but no stores in my area have them (Wal-Mart, the source, Staples), all had never heard what I was talking about. I saw on the web less than 5 dollars but have no confidence in the sites offering the devices. Has anyone bought from a trusted site.  could talk to the teak of microsoft but they wanted to charge me $ $50 so decided to save money to buy a card usb sound, if I can't solve the problem.

  Sorry for any ignorance or typos and long reading but I hope someone can help with this problem

  Check with the manufacturer of your system's support and their forums (if any).

  Have you checked on the website of the manufacturer of the device for the latest drivers?

  Realtek - HD Audio Codec Driver right side
  http://www.Realtek.com.tw/

  Download - SAVE - will click with the button straight on and RUN AS ADMIN

  NOTE: Often restore audio drivers to check the version after installing and restarting is
  see if the version you have installed is there, otherwise repeat the installation - restart until it is. This may take
  several tests according to the recommitments how much he makes.
  Rob - bicycle - Mark Twain said it is good.

• His laptop works only when the speakers are connected

  Problem_ZERO SOUND SOUND_Please Help!

  What do you do if your sound does not work?  I have a Dell Latitude E5500.  One minute I was listening to tunes on Youtube, and the next minute, I couldn't hear anything.   When I plug in my speakers, I get sound.  Someone please help me get my portable computer to operate with the sound when the speakers are not connected?  Thank you.

  Willy

  What do you do if your sound does not work?  I have a Dell Latitude E5500.  One minute I was listening to tunes on Youtube, and the next minute, I couldn't hear anything.   When I plug in my speakers, I get sound.  Someone please help me get my portable computer to operate with the sound when the speakers are not connected?  Thank you.

  Willy

  See if this Microsoft Help and Support link can help:
  No sound in Windows
  http://support.Microsoft.com/GP/NO_SOUND

  t-4-2

• Since iOS 9.3.1 my phone plays music on its own when the headphones are connected

  Since the last update, my battery does not last a whole day more and for some strange reason when my headphones are plugged into the music start playing without me from music. Music plays on its own at random times. Several times when I have my phone on the desk, I heard the beginning of music playing also on its own that helps the battery drain but other that the battery for some reason life any has been terrible. I hope Apple fixes this soon and also the restoration of the ability to use 3G to help save battery life. I have actually charged my battery to 100% and without touching all day insured no apps running in the background and I noticed my battery was 70% when ended the half-day.

  Try settings-> general-> transfer & Apps suggested and disable "Apps install".

• Satellite Pro 4600: beep when the headphones are connected

  Greetings to everyone.

  I feel a strange audio problem with my Toshiba Satellite Pro 4600 headphone output port. Whenever headphones are used, bursts of low beep occur regularly every 3 seconds or so superimposed on what playing right now. Each burst lasts about one second and consists of about 8 fast beeps. The beeps occur after Windows starts and end once the system off. I thought that it was a driver issue, but I use the latest driver for my card, downloaded from the site Web of Toshiba (package name: s5105sndx.exe).

  Can anyone help?

  Thank you for your attention.

  This problem doesn't appear if the headphone is plugged or also with the speakers if the headphones are disconnected?

  If this happens only if the headphone is connected if there is something wrong with the headphone jack.

• Laptop play outloud sounds when the headphones are connected.

  I have a laptop HP Pavillion with Windows 7 Home Premium, with a built-in microphone. I use my microphone on my computer to make Skype calls using the Skype program. I plug the headphones in my phone to hear what other people are saying in my Skype calls, however when I do this, other sounds coming from my computer are read aloud and do not get played in my helmet, so all those who are in the call to Skype with me can hear some sounds I play my computer.

  I would make sure all the sounds my laptop plays at all always go in the headphones and do not always play outloud as not to disturb the other memebrs in my Skype calls. Please help :( Is there a solution to this?

  Hi Swtgirl9314,

  Method 1:

  Step 1:

  In troubleshooting the problem, you can follow the steps below.
   
  a. Click Start, type Sound in the box to start the search.
  b. click sound in the results of search at the top of the start menu.
  c. click the reading notice the check mark next to the default device. For most users, the default device is pregnant, change of helmet. Make sure that the audio settings are configured as expected.

  Step 2:

  On the Read tab, select the playback device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, close this window to return to the previous window.

  Step 3:

  On the Read tab, select the playback device, click on configure and make sure that the configurations are set correctly.

  Method 2:

  If the problem persists then I suggest you to apply these below mentioned steps to cut all other sounds when windows detects a communication activity.

  a. Click Start, type Sound in the box to start the search.
  b. click sound in the results of search at the top of the start menu.
  c. click the Communications tab.
  d. click on the radio button according to your needs, under when Windows detects communications activity.

  After completing the steps above, you can check the issue.

  For troubleshooting you can visit this link below.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Report - Warning Message When the user clicks on the link with the value 0

  Hello
  
  I have a report with several areas, for example. Year, high priority project manager, County of medium priority project, project manager of low priority.
  I used column attributes to bind the data of the report on page 22.
  
  
  
  Now, some cells in the report have 0. Isn't it possible that when the user clicks on 0 binding doesn't to page 22, but see the window alert javascript indicating no data.
  
  
  Any help will be much appreciated.
  
  
  Kind regards
  Shijesh

  You can take a look at the following page

  http://HTMLDB.Oracle.com/pls/OTN/f?p=31517:228

  to see how this is possible.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• No Signal message when the monitor is connected to the graphics card.

  Thus, after posting this problem on different forums, I was told that my power (300w) was too low for my Radeon HD 7570 I tried to install. After you install a 585w power supply, the problem is still happening.

  Model: HP Pavilion h8 - 1240 t

  OS: Windows 7 64-bit

  Error: Monitor says "no signal" when connected in the PCI slot where is the graphics card.

  Changes: this always happened, did not get a single card to run this stupid computer!

   

  The DVI cable is completely plugged the monitor into the PCI slot and the graphics card is fully in. The fans on the graphics cards spin but it is not detected at all. It does not appear in Device Manager.

  Data sheet:

  I7-2600 3.4GHz

  8 GB RAM

  Orion 585w PSU

  Radeon HD 7570 (it didn't come with the computer, otherwise it would work...)

  PEGATRON CORPORATION 2AD5 1.03 (I guess that's the motherboard)

  No. I went to Dell and downloaded THE drivers that ACTUALLY work. Computer restarted and everything works fine.

• No sound from speaker, but sound does not return when the headphones are connected

  I have an Acer ASpire V3 - 572G
  When I unplugged my headphones don't switch on my speakers. When I reconnected my headphone the sound returned ony through the headphones.

  Things Ive tried
  Checked in the playback devices to see if the speakers have been checked as audio by default
  Reinstalled and updated my Realtek Audio drivers.

  Was finally able to get the sound back to my speakers. Seems it was my audio jack, sensing that something was plugged when none existed.

  I'm a Manager DD Realtek Audio and messed with the retasking speaker options. With the help of user help? "s solution and audio in my speakers briefly returned." Then went away.

  So I turned off my laptop has had little compressed air and a toothpick and went slightly on the edges of the socket. Transformed sound and return on return.

• I have an Airport Express, which gives an unexpected error message when you try to connect to an existing network of WEP.  Any ideas.  Tried the factory returned. He was knocked offline when someone dug into the telco cables.

  I have an Airport Express, which gives an unexpected error message when you try to connect to a router WEP (Verizon) existing iOS9.3.2

  It flashes orange, but can not be reconnected to the router or to the title of the Setup Assistant or Airport utility.  Is there a way to reconnect to WIFI or should I bite the bullet and connect via Cat5e and be done with it.  My VPN works much better without AirPort Express connected.

  Sorry, but there is no WEP settings AirPort Utility on the iPhone or iPad, or any Mac version of AirPort Utility which was used for the last 4 years or so.

  If you have an older Mac still running AirPort 5.x utility or a PC with the AirPort for Windows utility installed on the device, the WEP settings that could be used to get the Express to connect to a WEP network there.

  As you know, WEP has not been secured for a number of years, and there are any number of free utilities available on the Internet, which is crack a WEP network in a few seconds. Thus, all those who want to be on your network will not have problems to do very quickly.

  But it's your call.

• Send a message to another iPad in the House

  I now put my kids in the family sharing. How their message on their iPads. I tried the text and does not

  You try to send texts through their email addresses Apple ID? They connect and activate the Messages on the iPad? If Yes, go to settings > Messages > Send and receive to > you can be reached by iMessages to > e-mail addresses Apple ID them. Put a check mark there by e-mail address.

• Keep gettig this error message when you try to connect to Firefox, the proxy server refuses connections.

  Redownloaded Firefox and keep getting this error message when you try to connect: proxy server refuses connections

           Firefox is configured to use a proxy server that is refusing connections.
  

   Check the proxy settings to make sure that they are correct.
   Contact your network administrator to make sure the proxy server is
     working.
  

  Go to Options > advanced > network > connection > settings, then choose 'no proxy '.

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  It is important that you keep updated IE. The information included with your question indicates that you use IE7; you need to update to IE8 for your own protection. IE9 will be available for Windows XP.

  • http://Windows.Microsoft.com/en-us/Internet-Explorer/products/IE/home

• My iMessage keeps sending text messages when I want to send the iMessages iPhone how do I convert it back

  My iMessage keeps sending text messages when I want to send the iMessages iPhone how do I convert it back

  Go to settings > Messages and make sure that iMessage is activated. iMessage will only send with other iOS devices. The iPhone will send SMS if you send to non - iOS devices. You must also make sure that you have given to lit and it is connected to the Wi - Fi or cellular data.

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.