Sending DTMF tones

Hello

I'm following the steps in the article available here

http://docs.BlackBerry.com/en/developers/deliverables/17953/Add_single_DTMF_tone_to_send_queue_56555...

but the Builder

new PhoneCall()

There is no

Indeed, the reference to the api class PhoneCall does not contain this constructor.

Where I'm wrong?

Thank you

the documentation is probably correct.

initiate a call is not blocking. This means that the following line of code runs before the appeal is made.
use a http://www.blackberry.com/developers/docs/6.0.0api/net/rim/blackberry/api/phone/PhoneListener.html to detect the connected call.

Tags: BlackBerry Developers

Similar Questions

  • [CME 9.1] Phone IP 3905 fails to send DTMF tones to the external network.

    Hi all!

    We have three types of SIP phones in our CME 9.1: 3905, 6941 and 8941. All phones except 3905 send DTMF tones successfully through our operator. Here is "debug voice ccapi detail" what "206" (ip phone 3905) extension 93274343 external phone calls and trying to send numbers. Config is to be attached. Also, a part of config here:

    voip phone service

    list of approved IP addresses

    IPv4 10.0.0.0

    h323 connections allow h323

    allow connections h323 to SIP

    allow connections sip h323

    allow sip to sip connections

    service additional h450.12

    no additional service moved temporarily sip

    no service additional sip refer

    Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none

    H323

    SIP

    Registration Server expires 120 min 60 max

    !

    voice class codec 1

    g711ulaw codec preference 1

    g711alaw preferably 2 codec

    !

    !

    Global voice registry

    FMC of fashion

    source-address 10.10.0.41 port 5060

    3 timeouts interdigit

    Max - dn 100

    Max-pool 80

    load 8961 sip8961.9 - 2 - 2 SR 1-9

    authenticate the registry

    authenticate the defagroup.com Kingdom

    time format 24

    date format D/M/Y

    Flash TFTP-path:

    create the profile synchronization 0001013651736503

    Hi all!

    We have three types of SIP phones in our CME 9.1: 3905, 6941 and 8941. All phones except 3905 send DTMF tones successfully through our operator. Here is "debug voice ccapi detail" what '206' extension 93274343 external phone calls and trying to send numbers. Config is to be attached. Also, a part of config here:

    voip phone service

    list of approved IP addresses

    IPv4 10.0.0.0

    h323 connections allow h323

    allow connections h323 to SIP

    allow connections sip h323

    allow sip to sip connections

    service additional h450.12

    no additional service moved temporarily sip

    no service additional sip refer

    Fax protocol t38 ls-redundancy version 0 0 hs-redundancy 0 help none

    H323

    SIP

    Registration Server expires 120 min 60 max

    !

    voice class codec 1

    g711ulaw codec preference 1

    g711alaw preferably 2 codec

    !

    !

    Global voice registry

    FMC of fashion

    source-address 10.10.0.41 port 5060

    3 timeouts interdigit

    Max - dn 100

    Max-pool 80

    load 8961 sip8961.9 - 2 - 2 SR 1-9

    authenticate the registry

    authenticate the defagroup.com Kingdom

    time format 24

    date format D/M/Y

    Flash TFTP-path:

    create the profile synchronization 0001013651736503

    Register of voice dn 6

    number 204

    call-forward noan 201 timeout 20 b2bua

    Register of voice model 1

    function key 1 Redial

    function key 2 Cfwdall

    function key 3 Hold

    function key 5 Trnsfer

    function key 6 DND

    !

    voice dialing plan registry 1

    type of 7940-7960-others

    model 1...

    2 9810 model *.

    model 3 9...

    Model 4 98...

    Register of voice pool 8

    Mac ID 64D8.14A5.01B4

    type of 3905

    Number 1 dn 8

    numbering plan 1

    DTMF-relay rtp - nte

    codec voice-class 1

    206 206 username password

    No vad

    voice POTS dial-peer 1

    translation-profile out in the city

    destination-model 9 t

    port 0/0/0:15

    Retail ccapi voice 'debug' is here:

    phone #.

    * Dec 27 16:45:22.095: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:22.095: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:22.095: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:

    Hwidb = GigabitEthernet0/0, bandwidth = 80, Call Id = 817

    * Dec 27 16:45:22.095: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:

    Call total count = 0, call Voip Count = 0, Count MMoip call = 0 x 0, bandwidth = 80

    * Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:22.095: //-1/A3B9036582FD/CCAPI/cc_api_call_setup_ind_common:

    Interface type = 0, Protocol = 3

    * Dec 27 16:45:22.095: //-1/A3B9036582FD/CCAPI/ccCheckClipClir:

    Part number is provided by the user

    * Dec 27 16:45:22.095: //-1/A3B9036582FD/CCAPI/cc_api_call_setup_ind_common:

    After checking the number translation:

    Number = 206 (TON = unknown, NPI = unknown, not projected = screening, presentation = authorized),

    Called number = 3 (TONNE = unknown, NPI = unknown)

    * Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:

    Total Call Count = 0, entry calls (call count On = FAKE incoming call = TRUE)

    * Dec 27 16:45:22.095: / / 817/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:

    Total Call Count = 1

    * Dec 27 16:45:22.095: / / 817, A3B9036582FD, CCAPI, cc_insert_guid_pod_entry:

    Incoming = TRUE, Call Id = 817

    * Dec 27 16:45:22.095: / / 817, A3B9036582FD, CCAPI, cc_incr_if_call_volume:

    10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0

    phone #.

    * Dec 27 16:45:22.095: / / 817, A3B9036582FD, CCAPI, cc_incr_if_call_volume:

    Call count total = 1 call Voip Count = 1, Call MMoip Count = 0

    * Dec 27 16:45:22.099: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:

    Corresponding settings; Called number = 3, call transfer Consult Id =

    * Dec 27 16:45:22.099: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:

    No matching node

    * Dec 27 16:45:22.099: / / 817, A3B9036582FD, CCAPI, cc_api_set_transfer_info:

    Call transfer Reset

    * Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, ccCallDisconnect:

    Start calling accounting;

    Call Entry (Incoming = TRUE)

    * Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, ccCallDisconnect:

    Value = 28, entry calls (disconnect the Cause = 0)

    * Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, cc_api_update_interface_cac_resource:

    Hwidb = GigabitEthernet0/0, bandwidth =-80, Call Id = 817

    * Dec 27 16:45:22.443: / / 817, A3B9036582FD, CCAPI, cc_api_update_interface_cac_resource:

    Call count total = 1 call Voip Count = 1, Call MMoip Count = 0x0, bandwidth = 0

    * Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_decr_if_call_volume:

    10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0

    * Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_decr_if_call_volume:

    Call total count = 0, call Voip Count = 0, Call MMoip Count = 0

    * Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_guid_pod_entry:

    Incoming = TRUE

    * Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_call_entry:

    Total Call Count = 1, entry calls (call count On = FAKE incoming call = TRUE)

    * Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_call_entry:

    Total Call Count = 0

    * Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, cc_delete_call_entry:

    Removal of profileTable [0x336F00D4]

    * Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallGetVoipFlag:

    Mask of data bits = 0 x 2, Call Id = 817

    * Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallGetVoipFlag:

    Flag = FALSE

    * Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallSetVoipFlag:

    telephony #Flag = FALSE, data bits mask = 0 x 2, call Id = 817

    * Dec 27 16:45:22.559: / / 817, A3B9036582FD, CCAPI, ccCallSetVoipFlag:

    Call the entry (Voip AAA Flags = 0x0)

    * Dec 27 16:45:22.559: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:

    Entry call is not found

    phone #.

    * Dec 27 16:45:28.995: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:28.995: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:28.995: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:

    Hwidb = GigabitEthernet0/0, bandwidth = 80, Call Id = 818

    * Dec 27 16:45:28.995: //-1/xxxxxxxxxxxx/CCAPI/cc_api_update_interface_cac_resource:

    Call total count = 0, call Voip Count = 0, Count MMoip call = 0 x 0, bandwidth = 80

    * Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:28.995: //-1/A7D5DC978303/CCAPI/cc_api_call_setup_ind_common:

    Interface type = 0, Protocol = 3

    * Dec 27 16:45:28.995: //-1/A7D5DC978303/CCAPI/ccCheckClipClir:

    Part number is provided by the user

    * Dec 27 16:45:28.995: //-1/A7D5DC978303/CCAPI/cc_api_call_setup_ind_common:

    After checking the number translation:

    Number = 206 (TON = unknown, NPI = unknown, not projected = screening, presentation = authorized),

    Called number = 9 (TON = unknown, NPI = unknown)

    * Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:

    Total Call Count = 0, entry calls (call count On = FAKE incoming call = TRUE)

    * Dec 27 16:45:28.995: / / 818/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:

    Total Call Count = 1

    * Dec 27 16:45:28.995: / / 818/A7D5DC978303/CCAPI/cc_insert_guid_pod_entry:

    Incoming = TRUE, Call Id = 818

    * Dec 27 16:45:28.999: / / 818/A7D5DC978303/CCAPI/cc_incr_if_call_volume:

    10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0

    phone #.

    * Dec 27 16:45:28.999: / / 818/A7D5DC978303/CCAPI/cc_incr_if_call_volume:

    Call count total = 1 call Voip Count = 1, Call MMoip Count = 0

    * Dec 27 16:45:28.999: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:

    Corresponding settings; Called number = 9, call transfer Consult Id =

    * Dec 27 16:45:28.999: //-1/xxxxxxxxxxxx/CCAPI/cc_setupind_registration_lookup:

    No matching node

    * Dec 27 16:45:28.999: / / 818/A7D5DC978303/CCAPI/cc_api_set_transfer_info:

    Call transfer Reset

    phone #.

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_validate_mlpp_info:

    VALIDATION MLPP INFO:-ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_is_precedence_mlpp_info:

    Priority no more than Routine

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:

    Before COPYING - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:

    DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:

    AFTER COPY - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)] DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:

    Before COPYING - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:

    DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_copy_mlpp_info:

    AFTER COPY - CBC MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)] DEST MLPP INFO: ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_validate_mlpp_info:

    VALIDATION MLPP INFO:-ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [0 (INTERNAL_PRECEDENCE_0)]

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_is_precedence_mlpp_info:

    Priority no more than Routine

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_validate_mlpp_info:

    VALIDATION MLPP INFO:-ServiceDomain: [no (0)] DomainIdentifier: [000000] PrecedenceLevel: [-1 (PRECEDENCE_LEVEL_NONE)] NormalizedPrecedence: [-1 (PRECEDENCE_LEVEL_NONE)]

    * Dec 27 16:45:34.827: //-1/xxxxxxxxxxxx/CCAPI/cc_is_precedence_mlpp_info:

    Priority no more than Routine

    * Dec 27 16:45:34.827: / / 818/A7D5DC978303/CCAPI/ccCheckClipClir:

    Part number is provided by the user

    * Dec 27 16:45:34.827: / / 819/xxxxxxxxxxxx/CCAPI/cc_insert_call_entry:

    Total Call Count = 1, entry calls (call count On = FAKE incoming call = FALSE)

    * Dec 27 16:45:34.827: / / 818/A7D5DC978303/CCAPI/cc_peer_bind:

    Link = TRUE, Id = 818, bound Call Id = 819 Call Binder

    * Dec 27 16:45:34.827: / / 819, A7D5DC978303, CCAPI, cc_insert_guid_pod_entry:

    Incoming = FALSE, Call Id = 819

    phone #.

    * Dec 27 16:45:34.827: / / 819, A7D5DC978303, CCAPI, cc_set_voice_port_value:

    CC_IF_TELEPHONY: Echo = 0, = 0 Playout

    * Dec 27 16:45:34.831: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:34.831: / / 818/A7D5DC978303/CCAPI/ccCallGetContext:

    Context = 0x33C6F520, Id = 818 Call

    * Dec 27 16:45:34.831: //-1/xxxxxxxxxxxx/CCAPI/cc_set_outpulsed_digits:

    set 3274343 = outpulsed_dialstring

    * Dec 27 16:45:35.399: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:35.399: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:45:35.403: / / 818/A7D5DC978303/CCAPI/cc_peer_bind:

    phone #Bind = TRUE, Binder Call Id = 818, bound Call Id = 819

    * Dec 27 16:45:35.559: / / 818/A7D5DC978303/CCAPI/cc_peer_bind:

    Link = TRUE, Id = 818, bound Call Id = 819 Call Binder

    phone #.

    * 16:45:45.199 Dec 27: % LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0:14, status changed to

    phone #.

    * Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/ccCallDisconnect:

    Start calling accounting;

    Call Entry (Incoming = TRUE)

    * Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/ccCallDisconnect:

    Value = 16, entry calls (disconnect the Cause = 16)

    * Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/ccCallDisconnect:

    Call the entry (disconnect the Cause = 16)

    * Dec 27 16:46:02.215: / / 819, A7D5DC978303, CCAPI, ccCallDisconnect:

    Start calling accounting;

    Call Entry (Incoming = FALSE)

    * Dec 27 16:46:02.215: / / 819, A7D5DC978303, CCAPI, ccCallDisconnect:

    Value = 16, entry calls (disconnect the Cause = 0)

    * Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/cc_api_update_interface_cac_resource:

    Hwidb = GigabitEthernet0/0, bandwidth =-80, Call Id = 818

    * Dec 27 16:46:02.215: / / 818/A7D5DC978303/CCAPI/cc_api_update_interface_cac_resource:

    Call count total = 1 call Voip Count = 1, Call MMoip Count = 0x0, bandwidth = 0

    * Dec 27 16:46:02.227: //-1/A7D5DC978303/CCAPI/g113_calculate_impairment:

    (delay = 79 (ms), loss = 0%), Qi = 0 participants Io = 0 = 0 = 2 Ie = - 1 Itot = 1 DLI

    * Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_decr_if_call_volume:

    10.10.0.126 = remote IP address, Hwidb = GigabitEthernet0/0

    * Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_decr_if_call_volume:

    Call total count = 0, call Voip Count = 0, Call MMoip Count = 0

    * Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_guid_pod_entry:

    Incoming = TRUE

    * Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_call_entry:

    Total Call Count = 1, entry calls (call count On = FAKE incoming call = TRUE)

    * Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_call_entry:

    Total Call Count = 0

    * Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/cc_delete_call_entry:

    Removal of profileTable [0x336EFA6C]

    * Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallGetVoipFlag:

    Mask of data bits = 0 x 2, Call Id = 818

    * Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallGetVoipFlag:

    Flag = FALSE

    * Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallSetVoipFlag:

    telephony #Flag = FALSE, data bits mask = 0 x 2, call Id = 818

    * Dec 27 16:46:02.227: / / 818/A7D5DC978303/CCAPI/ccCallSetVoipFlag:

    Call the entry (Voip AAA Flags = 0x0)

    * Dec 27 16:46:02.227: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:

    Entry call is not found

    * Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, cc_delete_guid_pod_entry:

    Incoming = FALSE

    * Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, cc_delete_call_entry:

    Total Call Count = 0, entry calls (call count On = FAKE incoming call = FALSE)

    * Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, cc_delete_call_entry:

    Removal of profileTable [0x336E75C4]

    * Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallGetVoipFlag:

    Mask of data bits = 0 x 2, Call Id = 819

    * Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallGetVoipFlag:

    Flag = FALSE

    * Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallSetVoipFlag:

    Flag = FALSE, data bits mask = 0 x 2, Call Id = 819

    * Dec 27 16:46:02.275: / / 819, A7D5DC978303, CCAPI, ccCallSetVoipFlag:

    Call the entry (Voip AAA Flags = 0x0)

    * Dec 27 16:46:02.275: / / 0, xxxxxxxxxxxx, CCAPI, cc_get_call_entry:

    Entry call is not found

    phone #unde all

    The CME version is 9.1

    Version of the IOS is 15.3 (1) T (also tested in 15.2 - the same issue)

    All ip phones have the last firware (9-2-2-0), also I have already spent some of them (9-2-1-0) - the problem persists.

    Hello

    I think the best is to capture a trace of sniffer on the phone directly, we will be able to see if the phone itself sends the numbers.

    You can also enable some debugs:

    Deb voice ccapi inout

    messages ccsip deb

    Media ccsip deb

    That should be enough to isolate the problem

    --
    Jorge Armijo

    Do not forget to rate helpful responses and identify useful or correct answers.

  • DTMF tone speed

    Had a look on the forums but couldn't find a solution.

    I guess there is no way to speed up the rate at which a DTMF tone is sent after the other?

    No, if you press the keys during a call, dtmf tones are added to send it queue all the same, no difference in speed.

  • When the video parameters SX, MX and CSeries will be a keyboard of DTMF tones on call control page?

    Currently, the page of call control on the web interface of the Cisco video endpoints doesn't have a way to enter DTMF tones remotely.   It doesn't seem to be a keyboard of DTMF tones available to enter these tones remotely.   Does anyone know if Cisco will be adding this soon?

    You can enter DTMF tones using the web interface under Setup > API.

    xCommand DTMFSend CallId: DTMFString:

    • CallId: The CallID returned by operating the xCommand command Dial. During the call, you can run the xStatus calling command to see the CallId.
    • DTMFString: Enter the DTMF string.

    Example: xCommand DTMFSend CallId:2 DTMFString:1234

    Best place to find updates to come or possible would be to contact your Cisco account manager, if nothing is being developed or looked at the current time, they can create a demand for improvement for you.  However, the C series and the earlier boundaries of MX series points are already end of sale, and TC software they are running is in maintenance mode, in order to get the new features added to these devices special is unlikey.  Although there is a chance to get it added to the current range of endpoints SX and MX Series, just need to contact your Cisco AM and see what they can do to make your request.

  • Send dtmf or wherelse

    Hello..

    I have the next guy... I have to do an application what to do a procedure in a PBX.

    at this moment the PBX have a Pentecost function that I can make a call and type a few keys send numers o a break... DTFM tones... and this Pentecost keys I program the PBX.

    so, how do I do an application what some call to PBX in the background and send DTFM tones to make the program in the PBX?

    Read this thread, it might be useful

    http://supportforums.BlackBerry.com/T5/Java-development/sending-DTMFTones/m-p/557180#U557180

  • Are other than 0-9 DTMF tones, #, * supported?

    According to the official specifications of DTMF, there are 16 DTMF tones:

    0-9, #, *, A, B, C, D

    Are all supported by BlackBerry when using PhoneCall.sendDTMFTones ()?

    A, B, C, D, are not mentioned in the documentation.

    lol the supported are in the API.

  • 'call send DTMF' of the CTS

    Anyone know the syntax of this CLI command without papers?  One can understand...

    Hello

    SYNTAX:

    call send DTMF {Arg0} {Arg1}

    DESCRIPTION:

    Arg0 - mandatory

    Caller ID for which send the DTMF signal

    Arg1 - mandatory

    DTMF to send signal

    Example, here you are...:

    1. start the call:

    Admin:call start 112284021490001

    2. once the call is set up check Call command ID:

    Status of the call admin:Show

    Call status

    Recorded in Cisco Unified Communications Manager: Yes

    Call connected: Yes

    Type of call: call Audio only call start time: 19 09:39:27 Feb 2014

    Duration (sec): 15 Direction: outgoing

    Local number: 112284031421006 remote number: 112284021490001

    Status: answered

    Security level: unsecured call Id: 3

    3 send DTMF command:

    Admin:call send DTMF 3 53921568

    Send dtmf signals... FACT

    Admin:

    Concerning

    Marek

  • Skype sends more of his keyboard DTMF tones

    Yesterday, I noticed that I could access is no longer my daily teleconference as the remote system did not accept the access code I'm punching in Skype keyboard.

    Today, I tried to access a menu system (coincidentally, for the MS customer service). I reinstalled the latest version, but it still does not work.

    The problem occurred from the Click to Call plugin, breaking the last revision of browser Chrome uninstall.

    Is there a known here fault or finally has something broken on my machine?

    (Windows 8, office)

    Thanks for this - by acting on this information, I decided to try to call my own phone and hear the tones, since I'm sure that no dial tone was sent, and not a question of quality (that I don't have from time to time).

    In doing so, I found my camera is not plugged in, so no micro. This must have disabled all sounds, including Skype by sending sound signals.

    Connected to the camera and I'm back in business.

  • BlackBerry smartphones can not send (DTMF) digit code to open the Holy door - Bold 9790

    I get a call from the door intercomm when a visitor arrives. I'm supposed to then "dial" while the call is open to open the door. It worked well for months, but now DO NOT SEND THE NUMBER SOUND.

    There are some settings that must be changed, or has the spirit of darkness decended on the phone?

    Help will be appreciated

    Paul

    Cold, rebooted and solved the problem. No need to answer more.

    See you soon

  • Obstructionisme!

    I use a configuration with windows 7 (English, cant use Swedish, national characters in file names).  Chrome, ripple, last simulatotrs, VMWare, latest version of the SDK.  migrate a complex application from OS5 to OS10

    -The simulator of VMWare will not work. Problem posted earlier. No soluition to date.

    -Download the file does not work. People say its broken. Found no alternative.

    -Trying to find how to make a phone call in the API documentation. Did not. Found an entry in the community to use

    onclick = "BlackBerry.Launch.newPhoneCall ({'dialString': ' 5198887465', 'smartDialing': false})" / > "

    -Got «undefined for blackberry»

    -Updated config with:

    Did not help.

    Maybe try to make a few cc + extensions to solve problems? HM. Not a simple task. looking at the community effort on GIT.

    Should I have the simulator of VMWare? Seem like it. Can not get how I could do a manula call on the simulator of the ripple.

    Tired?  Very.  Frustrated?  Yes

    Any success?  Yes

    I can send a request to a Web site and get an answer using 'Workers', JSON objects and eventlisteners to

    to run in the background. But which is basically just HTML5/Javascript, nothing specific BB. Workers + JSON is a very good platform to make a difference in the background.

    Elwood: "it's 106 miles to Chicago, we have a full tank of gas, a packet of cigarattes, it's dark and we wear sunglasses." Jake: "it hit."

    You will need to write a native extension to send DTMF tones. We do not support this in WebWorks. You can find an extension native example under the repo of community here:

    https://github.com/BlackBerry/core-native-community-samples/tree/master/AudioLoopBackSample

    Regarding the documentation for the phone, it is available here for WebWorks. Here's the new documents, we have set up a few weeks ago:

    https://developer.BlackBerry.com/HTML5/documentation/phone.html

  • Break DTMF

    I saw in the posts on this forum the two "."  and ',' (period and comma) which means a break in the sending of DTMF tones.  I found no "Official" definition Is this one?

    How I she applied, is the API that is just taking a break?

    PhoneCall.sendDTMFTones does not support pauses (commas or periods).  Your application will need to wait/sleep between tones if you want to have a delay between the tones.

  • TC software for values letter DTMF

    Hello!

    You have a question that I can't find an answer documented for.  On the endpoints running a version of TC software, is it possible to get the endpoint to generate for A, B, C or D DTMF tones?

    My gut feeling is no, if this is because the graphic DTMF key does not have these buttons (only 0-9, *, #).  The reason to ask, that's what a customer trying to call in a bridge of AT & T who has one of these letters in the AXIS.

    Thank you!

    You can do this via the command line:

     xcommand DTMFSend DTMFString: A

    Alternatively, you can send the PIN all at once, IE if the PIN is 1A2B3C4D5 you can:

     xcommand DTMFSend DMTFString: 1A2B3C4D5

    Wayne
    --
    Remember the frequency responses and mark your question as answered as appropriate.

  • Satellite Pro 6100 Modem does not - No Dial Tone

    Hello

    I'm in terrible trouble. I have a big meeting Friday and discovered that the internal modem on my Satellite Pro 6100 does not work. I downloaded the drivers of software Modem since the support site, and the installation seemed to go OK. There are no conflicts listed in the Device Manager, and when I query the modem to in the properties of the modem (from the control panel), it seems question OK too, but...

    HE DIDN'T THERE WAS NO DIAL TONE!

    I don't know that it is connected to my phone OK. Instead of a tone, I hear a loud hum, with a series of clicks. I can't hear being composed either DTMF tones, even when I disable "wait for dial tone. This behavior is the same if the modem is connected to the phone line.

    I have a big rally Friday and will need this modem to work... any help would be much appreciated...

    Thank you

    Matt.

    Hello
    that doesn't sound so good!

    The measure where I read that your ad you´ve checked your system almost all.

    Right on the thing, have you installed a firewall or other programs to check system that denied access to the modem?

    It is also ok, you should let check your laptop on a faulty Modem.

    Good bye

  • DTMF

    I have an iPhone installed 6 9.2.1

    It seems that my DTMF tones do not work for automated calls. For example, I used to be able to open the door of our neighborhood by pressing '9' on the keyboard of my phone, but in the last two weeks, it no longer works.  Several other neighbors have the same problem and each of us has problems, have iPhone 6 and are all about AT & T service.  This is the case not only with the door, but all automated call where you will need to enter numeric responses.  You wonder if it's a problem of the iPhone or the provider.  I have already checked all my settings and make them pay in accordance with the recommendations of others who have had similar problems (IE... LTE is on and the value data only, point warm is turned off, wifi is on, call wifi is disabled, the top volume, etc...), but none of this solves my problem. I did a hard reset, but do not have reset all settings. I am at a loss.

    Try pressing 9 twice in quick succession.  Some devices answer a brief tone DTMF, but if the tone is repeated quickly.

  • How to generate a sound (tone) without clicking noise and how to select the left or right speaker

    Hi all

    I try to write write a VI that generates a pure sound of specific frequency and volume, and then sends this tone to a speaker or other (left or right) to be used to teach students about Audiology (hearing these tests may have taken where you hear a noise in one ear or the other).  I created a rather primitive VI to accomplish this, but I am plagued with a number of questions:

    (1) certain frequencies, but not all, the VI produces a rattling at the start and stop of the tone (I think this is related to repeat the configuration and the appeal of the material, but I do not know how to configure it in advance and avoid it - and why he created the clicking sound at all frequencies?).

    (2) at certain frequencies (14000 Hz and more), I do not hear the tone at all on my computer speakers (I still hear the click before and after, but I do not hear the tone.) I know what you might think, but no, this isn't a hearing loss from me :-)

    (3) I would like to be able to direct the tone selectively to the left or right speaker, but at the moment my VI only allows me to choose the 'number of channels' (who I presume "2ch" means left and right), but I don't know how selectively choose only one channel or another.

    Thank you for your helpful suggestions you can offer,

    Eric

    I put together a quick test and dirty without a ramp up and down (good thing for a State MC) as well as the name is not correct but my children are waiting... time for weekend

    I set the buffer to a quarter second, but however the "GUI" is not very sensitive...

Maybe you are looking for