Sending sms requires code signing?

Similar Questions

• Sending an sms requires code signing?

  The subject is quite explicit

  Nope, you only use class javax to send an sms that do require a signature.

• Free code signing!

  I'm developing an application that requires code signing. The application would serve only on my device and nowhere else.

  I wanted to know if I could get a signing key, i.e. unique access. not massive key free of charge, just for development and deployment.

  Nokia already provides free certificates for the development of general use. Here are some details and a link that best describes.

  http://wiki.Forum.Nokia.com/index.php/S60_3rd_Edition:_Application_Development

  Depending on the features used in an S60 application, there are different ways to sign a request:

  1. Possibility of user: used in an application compatibility are granted during the installation and the application UID should in the unprotected range (0x80000000-0xFFFFFFFF). A developer can use SignSis command to sign a .sis file. Please note that the application can only use: LocalServices, ReadUserData, WriteUserData, NetworkServices, UserEnvironment (S60 3rd Edition FP2, a developer can also use location capability).
  2. Open signed without the Publisher ID: the user must register and sign in to www.symbiansigned.com to download .sis application file. After having successfully downloaded, a developer can get immediately the application signed by the Web site, and the developer can download it from the Web site. This is to test the goal and the signed application can be installed on a mobile device. At the signing, a developer must provide email address valid as well as the number of IMEI (serial number of the phone) device. The signed application is installable within 36 months, and this method is for development purposes.
  3. Open signed with the Publisher ID: a developer must buy a first of TC TrustCenterPublisher ID. For Chinese developers, a developer can go to WoSign for the purchase of a Publisher ID. With the Publisher ID, a developer can request a certificate of developer of the www.symbiansigned.com. Using the certificate, a developer can sign with SignSis command .sis file. This is to test the goal and the certificate is limited by the number of IMEI listed in the certificate (maximum 1000 IMEI numbers to date). This certificate is valid for 36 months, and this method is for development purposes.
  4. Express signed: a developer must have an ID of the Publisher first. The developer has go to www.symbiansigned.com website to connect, and pay 20 USD for such a signature by an application. After you have downloaded the files needed on the site. Immediately, the developer can get the application signed by the Web site, and the developer can download it from the Web site. The signed application is for commercial sales.
  5. Certified signed: a developer must have an ID of the Publisher first. After an application has been fully tested using the Open signed or self-signed method (the request must have a UID between 0x00000000-0x7FFFFFFF), the developer can send the request to one of the 3 named test houses world for detailed testing and little money has to be paid for such a test, although the price may vary a House to another test. After that the application has passed Symbian test criteria, the application may be signed for commercial use.
  6. Symbian signed for Nokia: one of the necessary applications for the pre-installation must pass from the Nokia test criteria, and a developer has to pay for such a test. It has more standards than signed certified, and it should be conducted by 3 named test houses in the world. Detailed information can be found at: www.symbiansigned.com. For developers, who need to use the capabilities of the manufacturer, the developer must present a valid reason to justify the objective of using the features. Once the application has been approved, the developer can use Open signed with the Publisher ID to obtain the certificate required for testing and development. This method is for commercial use
  !

  If a developer wants to sign an application Freeware , please see the article How to sign an application freeware

  RIM is going to take the details of the previous keys and those will be disabled and you get the new.

• Distribution of Code Signing and OTA

  I'm developing an application that uses APIs that require code signing. I received my key, installed and used the tool in the code signing eclipse plugin to sign my application.  I can install the application via the desktop tools and I normally see a prompt "Do you want to grant the status of trusted application xxx" when I run the application.  Everything is fine after that.  Now the question I want to distribute the application on the web within my company.  I have other applications are implemented in this way, for distribution to work, but when I run the application, I get the error "xxx uses a secure API", indicating that it has not been code signed.  I copy my files .cod files .jad, etc. on the server of web/results expected / / in my eclipse solution.  The web, do not exit is signed?  Is there a way to force the eclipse plugin to sign the web output or you can do it manually?  Any other reason, it would not work?

  It turns out that our Web server was actually used older versions of files that were not properly signed.  We were storing the .cod files in a database and someone wrote the wrong application, basically.

• I have a problewm with my yahoo, sign in, they told me that they send me a cod, _ @_. How can _, I get this message

  Connect you leave a device we do not recognize. Learn whyFor your account security, please choose a listed phone number (carrier charges may apply) or email address below in order to receive a verification code. To learn more

  close

  To prevent an unauthorized person to access your account, we need to verify your identity with a unique verification code sent to your mobile phone or address no Yahoo! e-mail account.

  How does Yahoo! use the phone number?

  TeleSign, our partner company which helps to provide this service, and we'll use the phone number to send a verification code. We follow also each number to ensure that it is used too many times. We will not use the number to send you messages, unwanted promotional or other, unless you have given us permission elsewhere. We do not share the number with another company or organization except TeleSign Corporation, which retains the number is more than 90 days. Learn more on the privacy practices of Yahoo!.

  By e-mail

  • E-mail address is removed from the privacy *.

  Connect you leave a device we do not recognize. Learn whyFor your account security, please choose a listed phone number (carrier charges may apply) or email address below in order to receive a verification code. To learn more

  close

  To prevent an unauthorized person to access your account, we need to verify your identity with a unique verification code sent to your mobile phone or address no Yahoo! e-mail account.

  How does Yahoo! use the phone number?

  TeleSign, our partner company which helps to provide this service, and we'll use the phone number to send a verification code. We follow also each number to ensure that it is used too many times. We will not use the number to send you messages, unwanted promotional or other, unless you have given us permission elsewhere. We do not share the number with another company or organization except TeleSign Corporation, which retains the number is more than 90 days. Learn more on the privacy practices of Yahoo!.

  By e-mail

  • 447539639849

• Sending SMS from the Defy: two questions

  I've been with the Defy for a few weeks and I love the phone, but with all the power of Android, I lack some features, that I used to have in my old classic 'Hynek '. Perhaps they are there and I just have not found, but believe me, I really look...

  Two of them are currently particularly annoying when sending SMS. Here in Brazil, the long distance dialing format includes a code of long distance provider of your choice (specifically, you must dial 0 + code of the carrier + area code + phone number). So, I added all the entries on my directory, including the carrier code which usually has the lowest rates. But this format does not work to send text messages. to do this, use + 55 (the Brazil country code) + area code + phone number. There are a couple of other formats that the carrier has properly analysis and sends the message (for example, to send messages to phones in the same area code, just without any codes work phone number), but the format used for long distance calls cannot be used.

  My old phone had a feature that allows you to modify the number before sending the message, and I used that. With the Defy, I'll have to look up the number in the phone book and type it in the appropriate format, rather than choose the contact directly here as a destination. Is there a way to change the number before sending on the Defy? I tried, but it only allows me to delete this contact or include another. I also thought to including an additional entry phone just for SMS for each contact in the phone book, but it would be too complicated.

  The second feature is the ability to set the phone to send a request for confirmation of delivery as well as the message. As soon as the message was delivered to the recipient's phone, I got a message of confirmation by the carrier. While most of the messages are provided instantly, some, especially to another carrier, or if the recipient's phone is turned off or out of coverage in time, may take longer and sometimes it is important to know if the other person actually received it. My Defy not to do and I couldn't find any configuration option to allow this. I'm on the same carrier as before, so the feature support is not a problem.

  So, anyone know of a way to change the phone number before sending an SMS and request a delivery confirmation message?

  Thank you very much.

  Thank you, j0h4n. In the end, I solved both problems by simply using a different application. What I've explored, there doesn't seem to be a way to change the phone number of the addressee on the fly with the standard application, and everything by asking a delivery report is possible, he is not required by default, may not be configured to be requested by default and must be done individually for each message sent.

  But I explored the Android Market, try Handcent SMS and SMS GO and found both to be excellent. Both allow changing the number on the fly and NDRs that would be asked by default (in addition to many other interesting features). Since they have interfered with each other, I had to choose an and kept GOING SMS, I found a bit niftier to use and implemented the number editing best feature (Handcent editor a bit confused with this and I had to be careful when editing).

  Obviously, English isn't a problem for me, if not Handcent would have the head, because it is available, located in Portuguese (and many other languages), while SMS GO is only available in English and Chinese. But as it is, I liked it. I would still recommend Handcent and users should try both to see which they like best.

• Unable to connect BAR file "error: Code signing request failed because it cannot be recorded.»

  Hello

  I'm trying to sign the BAR file generated from the apk files, but I got this error:

  Error: Code signing request has failed because it cannot be recorded. Package-Version-Id [gYACgLU-GLg8YtNMuWU17-BoxsM], [gYAEgM4XsG9ppojbj3zOO9gg-Nc], Id [2189468] Client Application-Version-Id.

  I tried to redownlowd the file CSK again and again, did a lot of things but not luck.

  Thank you for sending via manifest file.  The error is caused by the name of the application you are using.  There is a limitation of the number of characters that can be used for an application name.  The number of characters will vary according to the type of encoding used, in this case it would be 7.

  The workaround for this solution, use our tool is to define an application name by default using Latin based on characters and then add names localized for each supported language.  These localized names do not have this limit.  For comparison, here's how it's done using BlackBerry Momentics: How to define an Application as the characters name Unicode requires the default name would only be used if a localized name is not available for the language of the user.

  Android also supports localized names of applications, so the similar process should work there too.

• Page of code signing does not work

  The steps:

  (1) open the URL with IE 8: https://www.blackberry.com/SignedKeys/nfc-form.html

  (2) select "I wish a device Code signing key.

  (3) fill in all information

  4) click the button 'send '. The demand is not there and get an error "Please ensure that all required fields are filled."

  Does anyone have a solution for this?

• Cannot send SMS on Verizon device

  Quote from the old forum:

  Comments	Cannot send SMS on Verizon device Posted the: March 7, 2007 20:11
  	The following code snippet to send a text SMS using WMA works very well on a T-Mobile (e.g., 8700 g) and a Cingular device (e.g. 8700 c): Con MessageConnection = MessageConnection) Connector.open (address); TextMessage msg = (TextMessage) con.newMessage (MessageConnection.TEX T_MESSAGE); msg.setAddress (address); msg.setPayloadText (content); con. Send (MSG); throws IOException on Verizon devices However, the same code does not work on Verizon devices (e.g., 8703e and 7130e). The line: con.send (msg) throws an IOException exception. I tried to use different formats for "address" (e.g. "1234567", "+ 1234567", "8001234567", "+ 8001234567", '18001234567', ' + 18001234567 ", etc." "") but they all failed. Does anyone know if sending messages SMS using WMA is supported on devices from Verizon?

  Comments: Gerard Re: Unable to send SMS on Verizon device Posted the: July 10, 2007 11:23 I am also having this problem. It seems that its associated port. Any input would be appreciated.

  Comments: comments Re: Unable to send SMS on Verizon device Posted the: August 10, 2007 14:55 I am also having the same problem on a BB 8830 peripheral and a Verizon of older model device. Is this a problem with all Verizon or specific devices for CDMA based ripe?

  jclarke Messages: 1 Join date: Jan 2008 Re: Unable to send SMS on Verizon device Posted the: 8 January 2008 13:45 I'm having the same problem on Verizon BB 8830. SMS fails with IOException null, however, http works very well. Sending sms: / / + 15555551212 {not the real number} Phone call log: S Java Exception - IOException E net.rim.sms - lat-0x8000001f d net.rim.sms - TXsb I have net.rim.sms - TXst

  
  a system - MMTpecPhone (3404) not
  a net.rim.sms - inch
  a system - MMTpecPhone (3404) not

  Any suggestions? All these are cryptic log messages are defined?

  Guest: Joe Re: Unable to send SMS on Verizon device Posted the: February 6, 2008 19:52 I also note the same problem on a Sprint BlackBerry Pearl and 8830. Namely, impossible to send SMS messages and we get an IOException with null message when it fails. Exactly the same code works fine on blackberry mobile PHONE. Is there a solution to this problem? I think the quality of RIM devices on CDMA technology is of bad quality. RIM rushes these devices at the door. In addition to not being able to send SMS, Sprint devices also seem to inexplicably lose network and requires a MASTER WIPE to restore network connectivity. None of these problems occur on the bays of GSM.

  Jeyaprakash.c Messages: 49 From: chennai, India Join date: Oct 2007 Re: Unable to send SMS on Verizon device Posted the: March 21, 2008 01:45 I also had this problem. the labour code will not send sms on cdma phones sprint and a few other oprators protects sms that api third party tat cdma phones requires a certificate level RIM and the operator...

  fpotter Messages: 28 From: Mountain View, CA Join date: Feb, 2008 Re: Unable to send SMS on Verizon device Posted the: April 23, 2008 04:53 Someone could rim please chime in here and confirm whether or not sending SMS CDMA phones should work? I burned just 3 hours playing with different things and play with smsdemo. If this is a bug, it would be nice to have confirmation that we can all stop wasting our time. If it's something that requires the operator level signature, it would be nice to know, too.

  saziz Messages: 181

  
  Join date: Mar 2007

  Re: Unable to send SMS on Verizon device

  Posted the: April 23, 2008 11:14

  By program, sending messages on mobile CDMA is currently not supported. As a possible workaround, you can use the API call to send SMS messages via the Messaging Application:

  net.rim.blackberry.api.invoke.Invoke
  http://tinyurl.com/6yecb4

  SARIM
  BlackBerry developer journal
  www.blackberrydeveloperjournal.com

  Comments: Matthew Wheaton Re: Unable to send SMS on Verizon device Posted the: July 21, 2008 01:12 True... but this just opened the app with pre-filled information. How to send without user intervention?

  This is possible by using the EventInjector and the trackball/wheel orders to send the message using the menu of the injection.

  Here is an example of code that seems to work on Sprint and Verizon devices:

          DatagramConnection connection = null;
          try {
  
              byte[] bytes = messageAsString.getBytes();
              connection = (DatagramConnection) Connector.open( url );
  
              Datagram datagram = connection.newDatagram( bytes, bytes.length );
  
              connection.send( datagram );
          }
          catch (Throwable t) {
              log.error( "Unable to send SMS to " + entry.getRecipient() + " with the url " + entry.getHttpRequest().getUrl() + ".  Message: " + t.getMessage(), t );
              throw t;
          }
          finally {
              IOUtility.safeClose( connection );
          }
  

• Ability to send SMS blackBerry Smartphones No.!

  I have a bb bold 9780, just updated to 6.0 - bundle2921 on the advice of someone at rogers technical support.  It's a phone Bell, get it unlocked with the network mep code. When I tried to set up the e-mail, he said:-"your device had a problem connecting to the server." It is the business version, I think, I don't know too much about these phones, but when you try to disable the password function, there is a padlock icon next to the box with a check mark in this document, indicate that the setting cannot be changed.  The text messages icon is there, but there is no way to compose a new text. When you go to any contact in the contacts list, you can usually press the bb button and one of the options is to text the person. On this one, send SMS is not an option.  It seems to me that it may have something to do with the service book, but I can not change anything here either. Help!

  Hello and welcome to the community!

  First things first... If this BB is now or ever was associated by BES (since you said 'business',) then that must first be broken before you try anything else... the symptoms you describe are usually a BB sign that was once associated with BES, but the it policy was not properly cleaned. See this to verify:

  • KB30076 How to check for an it on a BlackBerry smartphone policy

  If that turns out to be true and you are sure that you are not now a BES user to 100% (for example, you got this BB 2nd hand and the previous owner has had not the it policy, but they "divorce" it from the BES server), then you can clean it with this procedure:

  • KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  Take account of the warning... and therefore the reason why I said to do this first before trying anything else, because this will completely WIPE the BB clean, returning as long as "new factory", but the it policy will be gone.

  If you have data that you need to keep, then by all means do a backup first... but, when you restore, DO NOT do a restore roughly... If you do, you simply put it on board policy... rather choose you need when you restore specific databases, avoiding in particular those that have something to do with politics.

  • KB03974 List of database for the blackBerry smartphone

  Good luck and let us know!

• Cannot send SMS

  I have a Apple Watch watch OS 2.2.2 (13V604) running and one 5 iPhone with iOS 9.3.5 (G 13, 36). Previously, I found that the watch would not send SMS free hands unless I turned on iMessage; These messages would simply disappear, but things seemed to work for a few weeks after iMessage has been activated.

  Now, I find that the following will happen if I try to send messages to someone who doesn't use iMessage (e.g., Android users):

  'Hey Siri, send a message to $PERSON saying $MESSAGE'-> in a few seconds, a notification indicating that the message is not sent. The message does not appear in the mail app on the iPhone, but I know that many have unsent messages in the message shows application (it seems impossible to return or reject these). If I select a message manually via the mail app on the watch (whether by you answer or make a new) then it is sent correctly.

  Unfortunately, the sending of text messages hands-free for Android users is very high on the list of the essential requirements for the use of this watch. Can anyone suggest how to deal with this? NB. I already turned iMessage market again and power cycled shows and the iPhone.

  Hello

  It can help to switch send as SMS works again:

  -On your iPhone, in settings > Messages > Send as SMS.

• Unity3D code signing issue

  Hello everyone, I'm new here.

  I just tried to get the keys to a game from the signature.

  I got the csk file, but no email with SJC files didn't follow.

  Is there something that I am missing?

  Unity3D requires files from the csj to sign for BB10.

  Can someone help with the process, please?

  The file bbidtoken.csk is a BlackBerry ID token, which is our new method for signing.

  You can still use the previous method used (files CSJ) code signing keys.  You can get them using this form: https://www.blackberry.com/SignedKeys/codesigning.html

  Choose the second option, which is: "For PlayBook apps BlackBerry BlackBerry 10 apps development using a 10.1 SDK or lower or SDK WebWorks BlackBerry 10 below 2.0."

• Reuse of code signing on more than one computer keys

  Hello

  I'm moving my code signing keys to a machine with JDE 4.2.1 to another computer running JDE 4.1.0.

  Is this possible?  I copied my files sigtool.csk and sigtool.db.  But, when I try to sign a .cod file, it gives me an error of password - and I know that the password is correct.

  Of course, I could generate a new key pair and pay $20 to get signature for her keys, but I should be able to copy my keys autour, right?

  Someone else has been able to copy successfully their signature on another key machine?  I need to downgrade from JDE 4.2.1 to 4.1.0 - keys are not backward compatible through JDE versions and their corresponding SignatureTool.jar?

  Help, please!  :-)

  Using signature on several PC keys is not supported.  If you want to move your signing keys from one PC to another, you can contact [email protected] who can send you a set of replacement of csi files, that you can install on the new PC.  Note that this process invalidates your keys.

• Send sms - timeout

  Hi all

  I have a simple code to send sms. It works very well. Just a glitch. How will I know that sms cannot be sent? Some timeout for the connection or otherwise? Let's say that if there is no network, no sim card or any credit. Thank you

  Here is the code:

     public static void sendSMS(String content, String number) {
          MessageConnection mc = null;
          TextMessage msg;
          try {
  
              mc = (MessageConnection) Connector.open("sms://" + number,Connector.WRITE,true);
              msg = (TextMessage) mc.newMessage(MessageConnection.TEXT_MESSAGE);
              msg.setPayloadText(content);
              mc.send(msg);
  
          } catch (final Exception e) {
              e.printStackTrace();
              UiApplication.getUiApplication().invokeLater(new Runnable() {
  
                  public void run() {
                      Dialog.alert(e.getMessage());
                  }
              });
  
          } finally {
              try {
                  if (mc != null) {
                      mc.close();
                  }
              } catch (IOException e) {
              }
          }
      }
  

  I solved it by killing the thread that sends sms if it does not have 15 seconds. It's the best solution I've found.

• Validity of code signing keys

  I have a simple question. We issued keys of the RIM, everything works well for code signing. My question is how long is it valid keys and if expire? For example if required to expand this key every year etc...?

  Thank you for the help

  From what I remember, you get signs 0x7FFFFFFF. Every time you sign, you get an email telling you how many operations of signature, you left.