Sensor of fingerprint and Portege R200 prints. How does it work?

Similar Questions

• What is efax and how does it work?

  Hello!

  eFax® is a service provided by eFax®, not Hewlett-Packard, which allows you to send and receive faxes using the Internet instead of a phone line. eFax® is easy to use, but it is different from a typical telephone fax. You do not need a phone line to use it, so you don't have to worry about busy signals and you can place your printer where you want to, not where the phone plugs are! The fax number you are provided will not generally be a local number and maybe even in a different country. You will receive 20 entrants and 20 pages of outgoing fax per month for free with this service. Your account page will reset at midnight Pacific, the first of each month time. You can also subscribe to eFax® more to get additional pages by month by visiting: http://www.eFax.com/products/internet-fax.

  How does it work?

  Hi Im_cheesecake,

  Great information, if you don't mind I just want to piggy back off of your post, to eliminate any likelihood of confusion.

  The 20 free incoming & 20 free outgoing faxes are with HP printer which include the impression of the eFax service application.  From now on, we have three series printers that include the application pre-installed print eFax: HP Photosmart 7510 Series, series of 110 HP Envy and HP Photosmart eStation C510a.

  

  eFax also has a free plan that allows you to receive a limited number of faxes, but cannot send faxes. If you exceed the allowed number of received faxes, eFax invite you to upgrade to a paying account. Here are the main Details of the free plan:

  • A (i.e., non-local) eFax number distance
  • Regional/prefix code is selected by eFax and is not editable (except if you upgrade to a paid account)
  • 20 pages of incoming faxes per month (reception only)
  • You are prompted to upgrade to a paid account if you exceed 20 inbound pages, or if you need to send capacity.

• I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. V5.9.1

  I've updated the Mac driver for the 8600 and direct wireless printing is no longer works. The HP utility is v5.9.1, Mac OS x 10.7. I did the software update and a new driver HP was part of the package. HP ePrint still works, and print tests are okay for General network settings are intact. None of the applications that use the print dialogue box standard and local networking make it through the print queue. Any tips? Any way to roll back a driver version? Or quickly get the next revision and hope printing works again? Thank you.

  Update: OSX-specific Version is 10.7.5, model of the printer is HP OfficeJet 8600. See you soon.

  Hello

  Try to reboot the router and check if that can help you.

  After connecting the back of the router, wait 30-60 seconds and restart the printer and Mac.

  If it persists, try resettign the system as follows:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

  Now reconfigure the device by following the HP (under Utilities Applications\hewlett-Packard\Device) installation wizard.

  Please let me know if this can help,

  Shlomi

• I am an existing Member of cloud with lightroom installed on a desktop and laptop.  I get a new computer - Mac.  Can I transfer my account to a MAC user?  How does it work?

  I am an existing Member of cloud with lightroom installed on a desktop and laptop.  I get a new computer - Mac.  Can I transfer my account to a MAC user?  How does it work?

  Yes, you can use cc on your new mac.

  Just install the application of cc on your new computer, apps download Adobe Creative Cloud desktop | CC free trial Adobe

  Use the desktop application to install your programs of cc.

  as mentioned above, you should logout of your desktop or laptop computer to connect to your new computer (and you will need to connect to install and use your cc programs).  but you can leave cc installed on all 3 of your computers and log in for 2 of the 3 when you want.

• What is "align to stage" and how does it work?

  Interestingly, I could not find any solid data on what "align to stage" in the built-in help of Adobe.

  What is "align to stage" and how does it work?

  I thought that maybe it was something to align a shape to Center on the scene, but no. I can choose the form, select "Align to stage" and the form does not move.

  Suggestions? Thank you-

  On the Panel line UP, you should see on the right the: ' on stage: Click the icon beside him, {looks like a box with arrow on each corner}. Each and every time you want an object to align within the scene, you must select this option.

  Good luck!

  YSONG

• Is it possible to perform a search on Android content of a current Web page? If so, how could put upward and how does it work?

  Nice day!
  Dear Sirs / ladies,.
  You have a manual how to search the contents of the current Web page:
  https://support.Mozilla.org/en-us/KB/search-contents-current-page-text-or-links

  Unfortunately, I wasn't able to find the same option for Android.
  Is this possible?
  How does it work?

  sincerely
  Summerman

  See the attached screenshot for searching in the location of the page in our menu.

  This is a somewhat new. You must make sure, that you are on the latest version of Firefox for Android, version 37. You can check by typing about: firefox in the address bar. The version will be in the upper left corner of the page.

• Finger print reader does not work after upgrade to Windows 8 Pro - DM4 2055BR

  I updated my previous Windows 7 to Windows 8 Pro Edition and the Finger Print Reader no longer works. Validity software driver is already installed more simple pass, but when I run the Easy Pass it pops up the message "the drive is not connected, connect the drive.

  I noticed one lot of other posts related to the same issue, but I don't know if the model of my laptop does not support the new version of the operating system.

  I appreciate if someone could help me with this problem.

  Dulao35,

  Welcome to the HP Forum!

  When start you / see: Easy going on?

  You may be running HP SimplePass Version 8.0.0.57 or some other SimplePass 8.x?

  ======================================================================================

  You can run HP SimplePass Version 6.x later on your computer.  You may also be able to get SimplePass version 8.x if you want to stay with this version to work.  It's a personal choice, really - either version should be able to work on Windows 8 Pro.

  Note that the version 8.x SimplePass seems to dislike everyone, but the Internet Explorer browser. This is a personal observation and NOT what can known by other users.  If you use IE, then the point is moot.

  You can probably keep your existing driver of the fingerprint (Validity Sensor in the Device Manager) as long you run the version compatible with Windows 8, illustrated to the webpage of your computer driver:

  HP Pavilion dm4-2055br Entertainment Notebook PC Drivers

  See below for a method that you can use to upgrade HP SimplePass:

  Simple Instructions for upgrade HP SimplePass

  The bits on SimplePass version 8.x are towards the bottom of the file.

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• Photosmart 7520: Printer Wizard does not work on Windows 10

  My PC has recently upgraded Windows 10.  I am now having a problem with the Printer Wizard.

  Previously, I had the status display, the ink levels, scan document, check printer heads, etc.

  Now all I get is a printer configuration screen that has 3 options

  -connect a new printer,

  -convert a USB printer wireless, and

  -Add new software.

  How can I get the correct printer assistant screen to run?

  Thank you.

  Hi @AJA3,

  Thanks for joining the Forums of HP Support for a solution to your problem of HP printer Assistant.

  I understand that you use a HP Photosmart 7520 e-all-in-one printer with a computer who has recently upgraded Windows 10 and now, when you click on the printer icon to open the HP printer Assistant you get the "connect a new printer"window. " I would like to help with that.

  It is not that the HP printer Assistant does not work, but probably the printer probable network needs to be reinstalled.

  I would like to start by uninstalling all software that was installed before the upgrade to Windows 10 relating to printers. Here is a support document which can help needed - uninstalling the software of the printer (Windows).

  If you get prompted to restart the computer when uninstalling, go ahead and do the restart. If this isn't the case, restart the computer after the uninstall is complete.

  Once the computer is ready, try to use the HP printer installation wizard for installation. This tool will find the most recent version of the printer software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Printer spooler does not work for a single user on the network printer

  original title: very different printer problem

  I have a HP deskjet printer shared from a PC on the network.
  I was informed of a single person could not access error poped by saying "printer spooler does not work.
  I went to the services and made sure it was infact running and rebooted to be sure also restarted the RPC services as it is addictive
  Still, the user cannot print to the printer. I took the computer that has been seen issues and hung where fixed my PC and I am able to connect and print!

  If I move my computer witch would allow me to print before there where his computer is my computer prompt same error

  My idea is - what some are how a network issue, but the user can still access drives network, internet and other printers on the network

  Just not this printer

  The computer on the share is is a windows xp sp2 workstation

  The computer with the issue is any system I plug its cable Ethernet (XP anyway) I have not tried with a windows machine 7.

  My hypothesis is a bad Ethernet cable? I'm quite lost with this question at this stage.

  My next step is to hang the printer until a print area and assign an IP address and finish with the share.

  (Still not sure if it would help or not)

  Any advice is welcome thanks

  It turned out to be a bad switch. I don't understand why it did not work. All the computers had no problems other than the present even that if I swapped the ports it has made a difference.

  Hung new switch and all computers works fine now.

• wired keyboard 600 print screen does not work

  System

  Windows XP Professional 32-bit version 2002 Service Pack 3

  Dell Vostro 400

  Intel Core 2 Duo E4500 2.19 Ghz, 3.00 GB Ram

  Since I replaced the original keyboard with Microsoft wired keyboard 600 print screen functions are sporadic at best.  Sometimes Ctrl + PRTSCN works and especially it's not.  Even when Ctrl + print screen does not work I can not copy the active window by using Alt + PRTSCN.   I have a Setup dual monitor at work so that I can have the database, file explorere and opened in a window screen and development in another email.  I tried to download the driver from the Microsoft Web site, but he says that drivers that are installed are later.  (installed on the disc that came with the keyboard)

  Other than to start Microsoft keyboard anyone elese have all the solutions to make it work?

  Hello

  Follow these methods.

  Method 1: Follow these steps to run the keyboard Diagnostics

  (a) start Microsoft Keyboard Diagnostics. To do this,
  Click Start, click run, type mskey in the Open box, and then click OK.

  (b) press several keys to verify that the keys match the keys identified in the MS Key window.

  (c) when you are finished, click exit.

  If you get no response in MS Key on your keyboard, test the keyboard on another computer

  Method 2: You can also use the on-screen keyboard and check if you are able to take screenshot.
  For more information, see this link.
  http://Windows.Microsoft.com/en-us/Windows-XP/Help/on-screen-keyboard    

  If the methods above do not help, you can contact the Microsoft Hardware support.
  How to contact Microsoft if you have questions about your hardware device
  http://www.Microsoft.com/hardware/en-us/support/contact-us

• my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7

  He ran once before, one of my suggestions of solution was the coil (?)  was incorrectly, but don't know how to adjust it

  Hello
  (1) have you made changes before the start of this issue?
  (2) what is the exact error message/code?
  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Additional reference:
  Open printer troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
  Let us know if that helps.

• Add-on for Print Edit does not work

  I just got my iMac cleaned for adware and now my add-on for print edit does not work. There is an error 2 - XPF to the catalog. I don't know the email address of support for developers?

  Hello

  Did you mean this extension:

  • https://addons.Mozilla.org/en-us/Firefox/addon/print-edit/

  The contact details are on the right side of the page, next to the section 'on this add-on.

• Time capsule will save my laptop complete? Which means that if it crashes, breaks, etc. I'll be able to restore all my memory/data on a new laptop? Exactly how does it work? Thank you.

  Time capsule will save my laptop complete? Which means that if it crashes, breaks, etc. I'll be able to restore all my memory/data on a new laptop? Exactly how does it work? Thank you.

  Yes. Time Capsule uses the Time Machine on your Mac software. Here is information on both and the restoration:

  http://www.Apple.com/airport-time-capsule/

  Use Time Machine to back up or restore your Mac - Apple Support

• My 500 keyboard Microsoft Wireless Comfort has "extra" keys at the top. How does it work? Should I do something?

  My 500 keyboard Microsoft Wireless Comfort has "extra" keys at the top. How does it work? I have to do something

  Hello

  The keys that you have mentioned are known as multimedia keys that will help you to achieve functions like playing the song, stop playback of a song, open the web browser etc. to one touch access.

  You can refer to the manual for the keyboard for additional References.

  Thank you, and in what concerns:
  Naman R - Microsoft technical support engineer.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate.

  I had a computer repair man replace my hard drive and restore my laptop and now my orginal key does not work with the copy of vista it has installed and it won't validate how can I solve this
  I have an acer

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Validation status: invalid license
  Validation code: 50
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - XY9X3 - JDXYP-6CJ97
  The Windows Product Key hash: xFQJU8srKsovk6p1Lk1yW93in4E =
  Windows product ID: 89583-OEM-7332157-00211
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.0.6002.2.00010300.2.0.003
  ID: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows Vista (TM) Home Premium
  Architecture: 0 x 00000009
  Build lab: 6002.vistasp2_gdr.110617 - 0336
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {F20B4B72-1308-45BE-8F90-95E91A3F0AAF}1.9.0027.06.0.6002.2.00010300.2.0.003x 64*-*-*-*-6CJ9789583-OEM-7332157-002112S-1-5-21-923204104-223683984-168055983Acer Extensa 5630 Phoenix Technologies LTD.V1.30 20090319000000.000000 + 00070333507018400FA04090409US Mountain Standard Time(GMT-07:00)03ACRSYSACRPRDCT109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.0.6002.18005
  Name: Windows Vista, HomePremium edition
  Description: operating system Windows - Vista, channel OEM_SLP
  Activation ID: bffdc375-bbd5-499d-8ef1-4f37b61c895f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 89583-00146-321-500211-02-1033-6002.0000-0042012
  Installation ID: 004511331255365043724851364501374781338933223323713385
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=43473
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=43474
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=43476
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=43475
  Partial product key: 6CJ97
  License status: Notification
  Notification reason: 0xC004F063.

  Windows Activation Technologies-->
  N/A

  --> HWID data
  Current HWID of Hash: OgAAAAEAAgABAAIAAwACAAAAAwABAAEAeqjWy6pVxGJ6f0DXhgfkNoBBsJzy9ErM1F/eG4QdrFYqhQ is

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20000
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC APIC PTLTD
  FACP INTEL CRESTLNE
  HPET INTEL CRESTLNE
  START PTLTD $SBFTBL$
  MCFG INTEL CRESTLNE
  SLIC ACRSYS ACRPRDCT
  ASF!            OEMID OEMTBL
  SSDT BrtRef DD01BRT
  SSDT BrtRef DD01BRT

  Ah! -in this case, it is not necessary.

  I see from my records that a similar case has been solved by uninstalling and reinstalling the update WAT - KB971033

  Open the Windows Update - click the link view updates installed on the left of the page

  in the list, find the WAT update KB971033, and then uninstall it.

  Then restart and reinstall the update from here - http://support.microsoft.com/kb/971033

  redemarrer restart again, then try to change your product key to the one on the sticker - what is happening this time?