sensor

Similar Questions

• iPhone 7 black façade. Additional sensor?

  I was watching my new iPhone with the black front 7 and noticed an additional sensor to the right of the photoelectric cell. But I can't see it on iPhone before white 7 of my wife at all.

  The black front there additional proximity or the light sensor?

  The sensors are the same regardless of color.

  http://help.Apple.com/iPhone/10/#/iphe3fa5df43

• A faulty sensor of Palm rest can be disabled?

  I paid £2000 + for my macbook and I now use it to influence the paper. Long story short, my laptop (macbook pro mid 2012) was playing so I took it in the Apple store and he was diagnosed as having a sensor is defective Palm. The fix required a new logic board (£409). In addition to this the necessary battery change (a new battery requires a new keyboard and back a new apparently box!) for a total of five hundred and something books! I was told the defective sensor itself could not be replaced and to cough up £400 + to change the Board whole logik. It's not logical for me. You do not cut the arm because of a nail broke! It does not make sense. It is Apple design and there is clearly a defect in it and this lack of benefits Apple, not me! If you can not solve the nail then give me a new arm and charge me for the only nail (and work)! Beggars belief! I have a feeling that the culprit of this fault was the battery. Not at all satisfied with this new battery. Once it loses its ability to hold % 80 of its initial charge of Apple wants your money.  Don't want to go too. I'm currently saving up for a Laptop Microsoft I completely lost trust and confidence in Apple designs. As least I can work on it and replace parts without this kind of nonsense! I was strongly attached to my macbook pro! Does anyone know a way to bypass/disable rest palm sensor defective? If I disable this probe, I'm happy to take the risk and continue with monitoring software until I get my new laptop to heat.

  No has not already post this same question before?  And people have given you answers.  Don't litter the forums with duplicate messages.

• fingerprint sensor does not work for my iphone 16 6 GB pls help how to solve this problem?

  I have iPhone 6 grey 16 GB of model space suddenly my fingerprint sensor no longer works.

  When I try to set touch id always displays "failed please go back and try again".

  Please guide how to solve this problem.

  The warranty expired 3 months ago

  See this support document to help solving the problems of contact ID. If all else fails, then make an appointment at the Genius Bar from the Apple Store supplier or Service Center authorized Apple closest to have the material examined. They will explain your options.  Use touch on iPhone and iPad - Apple Support ID

• Doesn't have a heat sensor on MBP

  I have a 2010 MBP 13 "2.4 GHz, 8 GB, with a new battery. However, the laptop absolutely not remains on unless it is connected to the power supply. RAM upgrades and battery are authentic Apple and works correctly. Is there more than one thermal sensor in a MBP? How are to replace?

  There are about a dozen sensors. Most of them are inside other elements such as the processor and certified Apple RAM DIMM. There are some that can be on the radiators and other seemingly random places. There is also a release of rpm on each cooling fan.

  A bad connection of a sensor cable can cause a sensor to read his minimum or maximum and so out of reach.

• research to temperature sensor

  Hello

  I can't use the Mac mini anymore because the fan is at full speed and kernel_task on > 300%.

  I have already run a hardware test on my Mac Mini 2012 one it gave me error 4SNS/1/C0000008: TAOP - 124.

  I already know that the error is the ambient temperature sensor, but I have not any suspicion where it is. Similar threads on the forums are always on MacBooks.

  You know weather this sensor on the logic board or is it outside? What sensors does the Mac mini 2012 has, is there a list?

  Thanks in advance

  Michael

  First try to eliminate the high use of the core tasks

  Problem with kernel task - El Capitan

  Kernel_task is using more than 600% of my CPU and slow things down for analysis!

  Using an application like the SMC or Mac Fan Control fan control to manually control the fan speed.

• 5701na stream 7: Stream 7 & sp72220 Kionix G-Sensor Driver to

  Hello
  I've exhausted forums and the web looking for a method to activate the feature of merger of Kionix sensors on my two stream 7 tablets.  Everything works very well with 'Win 8.1 with Bing', but the sensors will not successfully install under Win 10.  I unpacked the SP72220 package and then unpacked the Installer "setup.exe", which contains the drivers/inf / files/reg entries etc. from batch.  But try as I can, the Fusion of sensors Kionix device does not start, instead, it reports an error 10 and remains disabled.  You name it, and I tried it.  I have re-installed the OS several times, and I've tried the drivers Win 8.1 as well as pilots Win 10.  I even downloaded several versions of Kionix and the Internet, always with the same result.  I also tried DoubleDriver similar to backup the drivers provided by a Win 8.1 install, then restore to a Win 10 install, but then again, the appliance will not start.  I really don't like win 8.1, but if the sensors does not start, then I might well have to go back to the operating system that is installed at the factory.

  Has anyone seen elsewhere this behavior, and if yes, do they have a solution?  Personally, I think it's something to do with exe or batch files in the package.  It took me a while to understand the parameters in batch files, but I think Miss me something with dpinst.exe, wudfupdate, mkdevnode, etc.  I'm really at the end of my patience with that, but the tablet will be pretty unusable if the screen does not turn.  I fear not install the drivers and the mods reg from the command line, if anyone can help with order of preference.  It's going to be something that the installer is missing.

  Thank you.

  It turns out that it was both "n" to win 10.  Any framework as the Kionix driver needed, simply was not available in the version "n".  The driver is installed around the silence, albeit with a prompt, box, but it finished within 10 seconds.  Previously, the box opens and you would see the framework for updated driver that passes through all the options, but not install anything.  So I'm done with Win 10 Pro 1511 February 2016, the MSDN ISO.  The only other annoyance was 8.1 Home Win activation key burned in the BIOS, which caused the Win 10 install to assume it was an upgrade of the home.  I created files EI.cfg and PID.txt and thrown on the specified USB port \Sources folder Pro with the VL activation key and everything has worked.  Thanks for the comments.

• How can I test the proximity sensor in an Iphone?

  My husband what's Iphone seems to have a proximity sensor that does not work, but I cannot say with certainty, when I talk with him on the phone to his ear is constantly hitting the keys and trying to dial numbers.  What can I do to check if the proximity sensor is bad and/or repaired?

  Record a voice memo, and then listen to it through the earphone speaker. If it does not, the screen will be black when you put it next to your face (or if you cover the upper part of the screen with your hand).

• Libretto W100: Access to acceleration sensors

  I would like to do shows with the G-Sensor.
  How can I access it?
  Is there any help?
  What is the driver and the name of the sensor?
  It does not appear in Device Manager.

  Hello

  It seems that the capacitive multi touch sensor is provided my Wacom.
  Google a bit and found this:
  http://www.Wacom-components.com/usingWacom/

  Welcome them

• A1410n on the motherboard heat sensors

  I have a pavillion a1410n that heat on the mother sensors on board who were not properly welded.  I looked on the HP website and can not find a local partner of HP who can fix the welds.  HP wants me to spend more than 300 for the computer shipped to them to repair or replace.  Is there another alternative?  I am on a fixed income and really can't afford that much $$, but need to use my computer.

  I guess he is not a technician in electronics. I suspect that your system is no longer under warranty. It was a defect of manufacturing of the motherboard.

  Why not buy a new replacement motherboard. They are not very expensive. Just don't buy it at HP... too much. The link will take you to one that sells for $59. Do a Google search for the card mother a1410n and you will find more. Once you have a replacement motherboard, you can bring to your independent technician and hire to remove the old and put in the new mobo. Then, your problem is solved. Since the new mobo is exactly the same as your old it is simply a matter of plug all components (including the HARD disk) and get to the top. Are no required reinstallation of the operating system that the HAL is the same.

  Published by erico on 02/02/2009 05:07

• Question of TrueSuite of fingerprint - error: could not open impression fingerprint sensor

  Hello

  A few days ago my TrueSuite reinstalled himself and then asked to restart the computer, which I did. But things, when I turned on the computer laptop back to reboot, TrueSuite will have to reboot again. This happened a few times, so I reset the laptop to a system restore point, I had created a few days ago.

  This deleted all my fingerprints, which I don't mind, but when I go to re-register my fingerprints, it says: "error: could not open impression fingerprint sensor.»

  PLEASE HELP ME WITH THIS!

  Thank you.

  See European driver of Toshiba for the most recent software TrueSuite to fingerprints.
  Remove your old software of fingerprint of the computer and reinstall the new software downloaded from the site driver of Toshiba.

  Then set it up again, create fingerprints and take advantage of the laptop.

• Satellite A300-M01 - fingerprint - cannot open the sensor with Win XP

  Hello

  I got a Satellite A300-M01 with Windows Vista but my my software is very slow, so I'm a Windows XP Installer to put in. After that, the fingerprint reader no longer works the registration of fingerprints he'll only say 'Cannot open the sensor' and if you access the service of this device it says "specified device instance handle does not match this device."

  I already downloaded the driver for this sensor of isd.toshiba.com.au, but after the installation, the problem is the same. Any info is much appreciated.

  Thank you.

  Ray

  Hello!

  Have you installed the tools and all the other drivers of Toshiba?

  Search on the Toshiba site for a BIOS update.
  Maybe this can solve the problem.

  Good bye

• How to reset the sensor of fingerprint on Portege R700-174?

  Hello!

  my "problem":

  on my portege (r700-174), I run a win7 (which was preinstalled on your laptop), a victory for 8.1. and for some is true the technical preview of win10

  all systems are protected by password and fingerprints.

  also the win10-test system (for test prints digital-utility in win10)

  now, I deleted an old generation of win10 and do a new install with the latest version

  Unfortunately I forgort to cancel the registration of the fingerprint I had entered with this old win10 - so now this finger cannot be used
  to be entered for the new win10 (or any other system)

  My question

  is it possible to reset it completely (clear all the fingerprints for all systems) the fingerprintscanner out of one of my systems running or to cancel the registration of the
  Fingerprints for this system, which does not exist anymore on my portege?

  Thanks for the tips

  Kurt

  The fingerprints are stored on the fingerprint sensor and you will need to follow the instructions of this Toshiba document to remove your scans of fingerprints.
  http://www.MyToshiba.com.au/support/items/FAQ/386

  In the case that this procedure does not work, only the Toshiba certified maintainer would be able to erase fingerprints users digital related privacy information on the fingerprint sensor fingerprint flash.

  See also another thread:
  https://Forum.Toshiba.EU/showthread.php?75917

• Windows 8.1 Fingerprint Sensor Driver does not

  Hello guys,.

  After I updated for Windows 8.1 my fingerprint sensor driver no longer works!

  my laptop is Envy-Dv6 7300 ex

  I trid download last update driver for Envy-Dv6 7300 ex driver fingerprint sensor digital validity 'sp58900.exe' file, but does not!

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132 & LC = on & CC = Aemea_middle_east & DLC = in & sw_lan...

  HP experits!  What we please? It is the urgent dinner!

  Thank you

  Abdelrahman Nabil

  Software Developer

  Happy for you missing USB driver yellow is the sensor I belive after I uninstall and reinstall easy pass HP works like Charm after the reboot!

  and it was one of the manythings that I try.

  but I guess the way to write it as follows:

  1. go to the Device Manager.

  2 - uninstall the USB not recognized yellow marke and uninstall Valideity WBF DDK to add/remove components.

  3 - Download the driver of sensor of fingerprint of CV for your labtop.

  4 reinstall HP Simple pass without uninstall it so you do not miss the credintial registered, you have sites Web and windows login.

  5 restart your knees.

  See you soon!

• Satellite 5200 - powers automatically (sensor/hall-magnet)

  I have an automatic feeding weird issue with my laptop Satellite 5200.

  * Situation. *
  1 laptop is turned off and the cover is open
  2. I close the lid while the laptop is always off (just battery is connected)
  3 result: the laptop automatically and boots: how weird is it that

  It has something to do with the magnet that is integrated in the screen/lid place/located near the right hinge. When you close the magnet is close sensor (hall sensor) and apparently, this magnetic field causes the cell to initialize. Normally, if your laptop is running and you close the lid of your laptop computer goes into mode sleep with this technology (magnet and sensor). My laptop works well if she runs and I close the lid. Then it goes on standby as expected. When I opened the lid he returned from sleep mode.

  The issue I am facing now is really just when I close the lid, * while the laptop is turned off already *.
  How do I fix this behavior stupid - how to adjust the magnet/sensor so it has not received the impulse to automatically feed upward.
  The solution must be around here somewhere. And I don't think it's a software configuration problem, because the laptop is turned off when this occurs - so no Windows is running, it is not in standby or hibernation mode.

  Your help would be appreciated.

  Thank you very much for your advice!

  Hello

  If he s really a lid switch problem then it would mean that there is a mechanical problem that could be solved by a service partner
  But I think that this is not a sensor problem possibly display frame/cover touch the power button (that's my opinion) and that feeds on the new laptop

  Just a question; What is cable LAN connected to the laptop when the laptop automatically?
  If Yes, then I would recommend checking the BIOS if the Wake up on LAN option could be disabled
  In many cases, it would lead to the reactivation of the laptop

• Portege 2000 - cover sensor/special keys do not work after installing XP?

  Windows XP SP2 is installed on a drive formatted on a Portege 2000 previously configured to run Win 2000 factory.
  After the installation of all downloads for Windows XP available on the Toshiba site have been added.
  The Toshiba special keys for browser and Toshiba console now do not work and the lid sensor
  to get the computer to sleep or into hibernation do not work when the lid is closed.
  She will be in hibernation if you press function f4. The XP was installed came not from Toshiba.
  Help? Thank you very much.

  Hello

  The fact is that the Toshiba power saver controls the hibernation mode, and the day before.
  Here, you can configure this option.
  AFAIK closing cover option you can set only on the eve of setting power off or no action. You cannot set to Hibernate.
  In the energy saver, you will need to use the Details button. In the system power mode, you can configure this action.

  Good bye