Separator for set two sets of headphones to the port single external microphone on iMac

Similar Questions

• How to read the two columns of data from the Port series

  Hello

  I'm reading two columns of data from the serial port.

  Example:

  52439 52430

  52440 52437

  52209 52214

  51065 51070

  52206 52390

  I use the serial of Visa service and I can read the first column of data from the serial port, but I can't understand how to read the second column.

  I want to both sets of chart data.

  I enclose my VI.

  Thank you for your help.

  The analysis of string function takes a "Format string" on top (with the right button of the function and choose Help, which explains all the entries).  In particular, you can say 'Give me two numbers separated by a tab' and the output will be two numbers (whole or floating, depending on the chosen format).  In particular, %d\t%d specifies a decimal integer, , whole decimal.

• 7 adapter w/lightning iPhone headphones. The caller does not hear me

  When I make calls or receive, the person at the other end of the line can't hear me but I can hear them.

  In this case more than 50% of the time until now, in fact I would say more like 75% so far. Sometimes its fixed by pulling me on the adapter of the lightning and put it back in the phone.

  Today, I put through a few tests in-depth using three different sets of headphones and had the same problem with all of them.

  Anyone else having this problem?

  I'm having the same problem also. Pulling on the adapter of the lightning and reintegrate them into the port seems to solve it, but then happens again next time you receive a call.

  I used two different sets of headphones with the same results.

  The remote control also do not work and can not adjust the volume of the call.

  Assuming that he is part of the issues that have been reported and will be fixed in the next update?

• When I plug my headphones in the front jack 3.5 external speakers are NOT dumb

  Hello

  I recently reinstalled Vista Ultimate on a bigger hard drive, but now I have a problem with my audio devices.
  (1) when I plug in my headphones to the port of front 3.5 mm external speakers are NOT dumb.
  (2) the only way I can switch from headphones and speakers is by right clicking the speaker icon in the notification area, click playback devices and "Set is device by default", followed by restart the video or itunes.
  Can someone help me with this.
  In addition, and I don't know if it's related, but in device under 'Other devices' management, the SM Bus controller has a yellow Triangle with an exclamation mark inside.
  Thanks in advance for any help
  Concerning
  Rob

  This is controlled by the hardware itself or the driver software.

  You can try to install the latest audio drivers available from the manufacturer.
  If this does not work, you can try to contact the manufacturer for assistance.

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• iCloud sync for notes - two sets of notes on the same account

  Hi, I have something very unusual. In short, some time last year, it looks like notes on an account, which are synchronized in iCloud, split: now, the notes synced to iPhone/iOS or iCloud.com are the same, but they are different from the notes synced on two different Macs (MBA and MBP). Both Mac show the same set of notes - which, again, is different from the whole shown in iCloud and iOS.

  I tried disabling sync on Macs, disabling Notes containers and disabling sync on the iPhone. In cases that made a difference, tried separately and simultaneously. In each case, when the notes are synchronized to iCloud, they continue on this divergent synchronization.

  New changes made on a mac show on another mac, but not iCloud.com or iPhone.

  Changes made on the issuance of iCloud.com/iPhone on the other, but not the MacBooks.

  100% here is the same iCloud account and notes in the Notes application are notes belonging to this iCloud account (indeed, no other account cannot synchronize the notes, besides I have cleared the cache / deleted to force containers). And yet once, it is reproduced on the 2 devices.

  If this account could have really two streams of Notes being synced? What can I do to get it to one on all devices (no need to merge)? Thank you.

  WHAT IOS and OS are you using? If your IOS is the version 9 and Notes iCloud you upgraded, then the computers must be using 10.11 and Notes iCloud upgraded.

• Suggestion for setting up a good secured router including wireless routers

  I've owned three routers LinkSys Wireless since May 2007: two WRT54G (V6 and V8) and my current V1 E3000.  All provided configuration options that can do if it is very difficult, if not impossible, for unauthorized access to my WiFi routers.

  All changes must then your system is connected to one of the router's Ethernet ports and not through WiFi due to the modification point #3 of "General Suggestions.

  All the elements in square brackets by "<>" are the titles of LinkSys Admin web pages or sections of web pages.  Don't forget to click "Save Settings" on a single web page before you go to another web page or your changes will be lost.

  Please note that not all pages of the LinkSys Router Web Admin can use the titles of Section-page/website such as used in this suggestion.

  Make sure you know MAC address and physics of your wireless adapter so that it will be necessary for the point #3 «Proposals WiFi»  Assuming that you have a Microsoft Windows-based system, use a 'Command Prompt' to issue command ' ipconfig/all' to determine the MAC address (aka physical) of your adapter WiFi wireless connected to a router.

  After all the suggested changes, repeat the process to ensure that the changes have been saved.

  GENERALS.

  (1) < administration/mgmt=""> change the Admin password to one of your choice.

  (2) access to disable HTTP and HTTPS allow access.  After that it changed was recorded, you must reconnect to the router via note https://192.168.1.1 URL using httpS or http (without S) for a secure connection to the router admin web pages.

  (3) in Wireless disable access to the Admin web pages.  Must use the Ethernet port on the router.

  (4) in disable remote management AND disable UPnP - UPnP (a well-known Protocol should can route diversion if enabled).

  Specific suggestions of WiFi.

  (1) in turn off the SSID broadcast.  This will prevent the intruders 'driveby' to see the SSID of LinkSys Router.  Make sure that change you the default SSID of your choice.

  (2) in set your security level to the WPA or WPA2 (preferred WPA2).  Do NOT use WEP because it's encryption algorithm can be cracked in less than 5 seconds.  This will protect your transmissions between your system and the router.  The E series routers are supported both WPA/WPA2 depending on the client configuration.  My WRT54G routers would support only WPA or WPA2.

  (3.) in Select AES, TKIP not as security consultants have recently discovered a flaw in TKIP encryption crackable.

  4.) Select a passphrase that you and systems all allowed must be used to secure your router connections.

  (5) in the enable filtering MAC and "Allow only PC" whose MAC addresses are defined in the .  Both of these changes will require that you register addresses MAC and physical of all wireless clients that allow you to connect to your network router.  Failure to record the physical address/MAC system will refuse this system to access your network, even if they have the correct passphrase AES and SSID.

  1. disable the SSID broadcast is useless. Any Drivede will detect always immediately the access point because it should send signals of tag.

  It is trivial to force a wireless client to reveal the SSID. Thus, any hacker will be able to learn the SSID almost immediately after it has detected the presence of your router.

  In addition, to disable the SSID broadcast causes known problems of connection/reconnection with several wireless devices.

  In addition, broadcast disable SSID drains the batteries in your wireless devices as they have to actively seek a connection to your SSID to know whether here or now.

  As long as your wireless device is not connected to a wireless network, it will be continues to try to connect to your SSID at regular intervals. For example, if you have your iPhone set up to connect to your home network and you pull out your iPhone permanently tries to connect to your SSID, transmitting the requests of the association on a regular basis, actually bloating on your "hidden SSID' to anyone.

  As transmitting something takes a lot more power then passively scanning and tuned radio waves, it drains the battery. If you need good battery life with your ever wireless devices connect them to a network with SSID broadcast disabled, or make sure that the device does not automatically connect to it!

  Never disable the SSID broadcast, especially not for security reasons, because they do not offer any added safety or an advantage.

  2. the MAC address filtering does nothing more. MAC addresses are always in the unencrypted part of wireless packet. Any attacker will immediately learn the MAC addresses of your wireless devices. It is absolutely useless in the means of security and cause problems as the best for you. Do not bother about the filtering of MAC addresses. It does not prevent attacks on your network as it is easily circumvented.

  Use WPA2 with AES and a password strong. That's all that is necessary to protect your wireless network.

  The rest is a joke for any aggressor and bothers you much more than the alleged assailant. If an attacker was able to decipher your network WPA2/AES the SSID of your network and MAC addresses are a free byproduct you will get during the cracking process...

• all sets of headphones are only receive the right left sound doesn't work-headphones only

  my headphones are plugged into the computer before taking and I get only sound right, and I tried three sets of headphones

  Go to the mixer and make sure that the balance is equal to the left and right signals.

  Also do this for any software, you can use that built into the mixer.

  See you soon,.
  Jerry

• How can I set a password for firefox so that everyone must enter the password before running firefox

  My younger sister run my firefox just to this afternoon (she origin use IE), and she saw something that is not visible. How can I set a password for firefox so that everyone must enter the password before running firefox?

  Another option is the master password + extension.

  You must first make sure that Firefox uses a master password, for more details on how to do that see use a master password to protect stored logins and passwords. Then with the master password + extension in its options, go to the getting started section and make sure that "ask for password at startup" and "Exit if cancelled" is selected both.

  As with all extensions, this protection is quite weak and can be bypassed if start you Firefox in safe mode that disables extensions.

• I want to have the spell checker for set email sending to automatically check spelling when I send the mail.

  check spelling

  I want to have the spell checker for set email sending to automatically check spelling when I send the mail. I did, but my spell checker is set by default to a French dictionary. How is it still happen? and how can I get it back to English? It's not an option in the menu drop-down button. There is only the French. HELP!
  You no longer have the correction spell checking capabilities in some languages in Outlook Express 6.0 after you install the Microsoft Office 2007 or Office 2010 system
  http://support.Microsoft.com/kb/932974
   
  Outlook Express cannot use the check spelling of MS Word in Office 2007 or newer. A free spell-checking the download is the easiest way to get around this.
   
  Vampirefo spell check.
   
  Download from Major Geeks:
  http://www.MajorGeeks.com/download.php?Det=2952
   
  Or upload it to SnapFile:
  http://www.SnapFiles.com/get/spelloe.html
   
  You wanted TinySpell or. (Check spelling while typing).
   
  Download it here:
  http://www.tinyspell.M6.NET/ 
   
  Australian English spell checking
  (Also suitable for other English speaking countries).
  http://www.justlocal.com.au/clients/oespellcheck/ 
   
  If you have an earlier version of Office, see this:
  http://www.Outlook-tips.NET/archives/2006/20061228.htm

• The message I get is Microsoft word has not been installed for the current user. Please run set up to install the application. I reinstalled the software, but get the same message.

  The message I get is Microsoft word has not been installed for the current user.   Please run set up to install the application.   I reinstalled the software, but get the same message.

  Hello
  
  See the methods listed in the articles below and check.
  You receive an error "Microsoft has not been installed for the current user" message when you try to start an Office 2003 program or an Office XP program for the first time
  http://support.Microsoft.com/kb/898512
   
  You receive a message "Microsoft has not been installed for the current user" when you start an Office XP program or start of Microsoft Office Maintenance mode
  http://support.Microsoft.com/kb/298022
  
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problems with static IP setting for the port forward through 2 routers

  I currently have cable internet connected to a router (Linksys E2000 w / v1.0.03 firmware). This router is connected to another router, a Linksys E3200 with firmware v1.0.02. In order to correctly forward ports through the E3200, I understand that I need to set up a static IP address on the router.

  I almost followed the steps in this video, but when I enter all the IP addresses for the static IP address settings, it allows me to access the router configuration page. I try to get the new IP address that I gave (which he tries to move automatically once I have save settings) and the connection times out. I am able to access internet otherwise, however. From here, I have to do a factory reset on the router and start from square one.

  Anyone have any ideas? I'm quite frustrated and would like to get ports forwarded so I can get my server properly set in place.

  1. If it has connected LAN - LAN you will need to disable the DHCP server on the E3200.

  2. the best option would be to use the 'bridge' on the E3200 mode (in the latest firmware) and connect the internet port to the main router.

  3. If connected LAN - LAN (or in Bridge mode) all internet related functions on the E3200, including ports are not relevant. There is no need to set up the port on the E3200 redirects. All shipping is done only on the E2000 and nowhere else.

  4. What is the address LAN IP of the E3200? What is the address LAN IP of the E2000?

• Page setting for the Port SG200-26 1.4.0.88 corrupt firmware / Firmware Bug?

  Hello

  After the upgrade to 2 switches SG200-26 version 1.4.0.88 firmware, I am unable to set up the CONFIGURATION of the PORT page.

  See the attached images.

  Must be a bug in the firmware.

  Please notify for the solution!

  Hello Dimitris,

  According to the instructions mentioned in the release notes, the downgrade is possible. Please you have the boot updated as well (it is a part of the firmware package)? (answer to this question does not depend on possibility of downgrade).

  What about other browsers, don't know you the same problem with Firefox or Chrome?

• ASA 5510 - tips for setting up - no internet

  Hi all

  I'll set up an ASA 5510 for the first time using the GUI.

  I put 0/0 0/1 and outside as inside.

  I set up outside with the static WAN address, and it is connected to my ISP.

  But I can't do everything Internet works on the inner harbor. I've read elsewhere, I need to add a static route. Can someone please advise?

  You must place a default route to carry traffic from inside to outside. Use the GUI to place a static route 0.0.0.0 0.0.0.0 for the ip address of your next hop ip of the connection to the ISP.

  Sent by Cisco Support technique Android app

• My player does not allow me to sign a document.  The security setting says not authorized for signatures.  How can I change the security allowed?

  My player does not allow me to sign a document.  The security setting says not authorized for signatures.  How can I change the security allowed?

  You can not. You must have Acrobat and the file password - change for this.