Similar Questions

• The cRIO serial port can be used for the CAN bus communication?

  I would like to order a CVC with a CAN of network device and would like to know if this can be accomplished by using a serial port integrates the cRIO (OR cRIO-9024 in my case). Is it possible, or would need a C Series module CAN?

  You need a C Series module. Series and CAN use a DB9, but they do not have the same physical layer.

• Cannot add serial port in MAX

  Hello

  I have a cRIO 9076 and you want to use the port series. I can see the cRIO able and Automation Explorer, but I'm unable to add a serial port. I get the error "Internal Error Max could not get interface to database of the MAX". A new installation does not solve the problem. Any ideas what could be the cause?

  Thanks in advance

  

  Thanks for your answers, even if they did not help. Already tried to resolve this question of the repair of a corrupted Max database before posting here, but he has not changed a thing. An other error message told me that maybe NI-VISA has not been installed on the controller, so I installed just that. What I didn't know, is that you will also install "server of NI-VISA. Could be obvious to more experienced LABView users but I'm new to this software and the large number of software components is a bit frustrating...

  Anyway, problem solved :-D

• the NI 9871 serial ports appear also in MAX with built-in serial ports of the target - under devices and Interfaces IS NOT? NO NEITHER 9871 (Scan Interface)?

  Hi - Have cRIO

  Can someone help me get the NI 9871 (Scan Interface) work?  My two 9477 and two 9425 and 9403, function with the scanning Interface.  In MAX > software > NOR-Serial RT 3.82 > NOR-Serial 9870 and Scan Engine Suport 3.8.2 9871 BUT NOT == MAX > devices and Interfaces > series & parallel = number of Ports Com for 9871 listed?   Project, 4-port RS-485 NI 9871 is in slot1?  Any help appreciated thanks

  the serial ports on the NI 9871 also appear in MAX with serial ports integrated target under devices and Interfaces

   

  NEITHER 9871 (Scan Interface)

  I left the Slot 1 Slot 8 9871 Know works and MAX displays 4 COM ports.  Something is misconfigured in Slot1?

  Solved!

  Thank you

• NEITHER 9870 Serial Port Communication

  Hello

  I have the module 9870 serial rs232 on 9073 cRIO chassis. I have watched the series loopback example, added to my project, changed the entry node to point to the serial port on the right. It works fine when I use a closure connected the cable to the serial port.

  However, when I connect the port to the serial port on the back of my pc (using the cable series of woman to woman) and run the "Serial Loopback DMA Rd (host) .vi" I see no data being sent on my PC com port hyperterminal. Also if I type any character on hyper terminal I see their receipt by the LabView program.

  Why is this happening? that is, the example works well with a loopback adapter and not when it is connected to other serial port?

  Any help will be appreciated.

  concerning

  Bastien

  Hello

  You have all the details on the cable you are using? You may need a null modem cable.

  All in hyperterminal settings the cRIO? IE: Baud rate/parity/start and stop bits etc.

  Could you take a screenshot of the hyperterminal settings and the windows serial port settings? Could you attach your cRIO VI?

  Thank you very much

• HP Compaq 6000 Pro AT492AV: Serial Port PCI Driver help - HP 6000 AT492AV Windows XP Pro

  Due to former software compatibility issues, I run Win XP on my computer HP Compaq 6000 Pro AT492AV.  I installed a new copy of XP OEM and have solved all driver except for 2 problems:

  (1) PCI Serial Port, here's the info from Device Manager:

  PCI serial port

  PCI bus 0, device 3, function 3

  PCI\VEN_8086 & DEV_2E17 & SUBSYS_3048103C & REV_03
  PCI\VEN_8086 & DEV_2E17 & SUBSYS_3048103C
  PCI\VEN_8086 & DEV_2E17 & CC_070002
  PCI\VEN_8086 & DEV_2E17 & CC_0700

  (2) unknown Device, here's the info from Device Manager:

  Controller of Interface LPC Intel(r) ICH10D - 3A1A

  ACPI\IFX0102
  * IFX0102

  I'd appreciate any help you can provide!

  All the best

  Hello:

  You need these drivers for devices...

  1.

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45367.exe

  2.

  This package provides the device driver for the Infineon Trusted Platform
  Module (TPM 1.2) in office supported running models taken Microsoft support
  Windows XP operating system.
  
  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40553.exe

• Using the Serial Port on the HP 50 g graphic calculator

  Hello world

  I have another question. I want to use the Serial Port on the HP 50 g to connect with another device. The device is called the MFJ-1214PC. What it does is to accept the text and commands through a 9-pin serial Port and converts the text in a Code Morse/RTTY sound audible. It also decodes Audible the Morse Code and RTTY radio signals and displays them as text on your computer. The program that controls the MFJ-1214PC was originally written for an IBM PC for the MS-DOS operating system. The HP 50 g graphic calculator meets the system requirements for the simplest version of the program. I was wondering if there is an MS-DOS emulator written for the HP 50 g, which would allow the HP 50 g to become the computer in this case, or if the program could be rewritten and brought to the HP 50 g. If it could be rewritten, programming language what do you think would be better suited to this type of application (if it is even possible?) or UserRPL, SystemRPL or Assembly. Don't forget that I'm a complete newbie with the HP50g and have never programmed with it yet. I'll include the manual of the MFJ-1214 PC as an attachment so that you won't have to look for him. Thank you in advance for your help!

  ~ Zekelegge ~.

  I understand (from my brief overview) out of the box-MFJ-1214PC, this offer box decoder output series computer.  The computer (50g in your case) will have the software to read message series and then convert that to an output for display.

  BartDb gave you the right answer.

  A serial cable with the correct speed level and reversing lever to manage as well as the 50G has a RS-232 signal to the outside world is the ideal solution.

  However, make sure that the output of the decoder box series package can be understood by the 50 g. aud, bits, etc.   (you have the set-top box manual, so you'll have to look that up)

  the streamsmart is not an aggregator of serial port.

  in other words, these connectors DIN of Qty 4 on the front do not accept series rs-232 input and send then to 50 G.

  I'm not an expert, streamsmart more info on these boxes is rare to find.  The probes are even more rare.

  However, I know that the 4 connectors are for the analog-to-digital conversion in the probes.  The streamsmart works as a "data logger" in which he sees the input probe, the A/D converted, then sends it to the 50G (or a computer via the USB port).

  In addition to the solution of Bart, there was another named Tiwag forum poster who created a serial cable and displayed a schematic representation of the cable.  This information can be found here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/serial$20port/comp.sys.HP48/ltcane1jSOw/uHyw2Ti03kgJ

  to see an example of programming to use the serial port of 50G, you can reference the following hpcalc GPS data collection program.

  http://www.HPCalc.org/details.php?id=7105

  It is written in userrpl so can be crossed with the reference of users advanced for the translation of the syntax.

  It seems that the main routine of concern for the comm to the gps is in the file "GPS >.

• Tecra M11 - 17V - identify the serial port on the docking station

  I have a laptop Toshiba Tecra M11 - 17V, which I often use with the docking station that accompanies it.
  There is a DB9 serial port at the back of the docking station, but I don't know what COM Port.

  I use Windows 7.

  In the device, COM9 Manager - COM22 are identified as Port BT (bluetooth). Com7 - COM8 are RIM Virtual Serial Port v2, COM17 is Prolific USB-to-Serial Comm Port and COM18 is USB-Serial CH340.

  I thought that COM17 or COM18 were the most likely candidates, but have not been able to get to answer using one of them.

  I connect a Psion 5 (Comms app) to him and have developed ports and the Psion 8bits, 19200 baud, no parity, 1 stop bit.

  Hello

  > There is a serial port DB9 on the back of the docking station, but I don't know what COM Port, it is

  I think you have misunderstood something wrong
  COM ports in Device Manager are virtual com ports
  There is no link between a serial port and a virtual com port.

  I have a question: what docking station you have exactly?

  I had an express port replicator and this device required an additional serial port driver installation.

• Serial port PCI and Communications Simple driver (s)

  I just reinstalled windows 7 Pro X 64 and I have all the drivers, but these two. Any ideas on what they are, and where I could get them?

  PCI serial port

  PCI Simple Simple Communications controller

  I have a HP Elitedesk 800 G1

  Hello:

  You need this driver...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5387468 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_131760_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• p5u69ut: Serial Port PCI drivers

  Where can I find the drivers for the PCI Serial Port on this machine?  I loaded all the HP drivers for this macine after an upgrade to windows 7 Enterprise and this driver is not available.  Thank you

  Hello:

  You need this driver... install it manually if automatic installation method does not work.

  This package provides the driver Intel Management Engine components to support desktop models that are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75384.exe

• dc7800p Convertible Minitowers: win 10 PCI Serial Port & PCI device drivers unknown misiing

  Have missing drivers - managed to solve PCI Simple Communication Device driver missing by downloading some drivers of HP support and running these '(Admin) command prompt' with them running in Win 7 Compatibility Mode.  What (s) that I have to run to remedy or if not where should I look to fix.

  Hello:

  You need this driver for the Serial Port PCI...

  This package contains the Intel Local Management Service (LMS) and the support of Serial - over - LAN (SOL) for Intel Active Management Technology (AMT) for the supported desktop models and operating systems. This software is part of the Intel Digital Office Initiative.

  FTP://ftp.HP.com/pub/SoftPaq/sp46001-46500/sp46134.exe

  Please post the hardware ID of the PCI device unknown that you are missing the driver.

  To find the hardware ID, go to the Device Manager and click on the unknown device needing driver.

  Then click on the Details tab in the upper part of the device window.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 3rd point (Hardware ID).

  After the first string of characters you see in the window.

• Elitedesk 800 G2: PCI serial port (s) for Elitedesk 800 G2

  I recently reinstalled Windows7 professional 32-bit, and now the following shows no driver in Device Manager:

  PCI serial port

  PCI Simple Simple Communications controller

  Should which driver I?

  Hello:

  You need this driver for these devices...

  This package provides the driver Intel Management Engine components to support desktop models that are running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75001-75500/sp75384.exe

• Z240: PCI Serial Port Driver for HP Z240 VEN_8086 DEV_A13D

  This should be easy, but I can't find driver for HP Z240 VEN_8086 DEV_A13D PCI Serial Port. I think this is the driver of the AMT for this puppy... I think that its called sunrisepoint or skylake chipset? Things that make you go hmmmmm

  

  Hello:

  You need this driver... driver AMT GROUND is provided.

  This package contains the last engine Intel management software for the supported desktop models and operating systems, as well as utilities to update and check the status.

  FTP://ftp.HP.com/pub/SoftPaq/sp76501-77000/sp76975.exe

• PCI serial port driver

  Hello. I have HP Compaq dc7800 Convertible Minitowers, I'm running Windows 7 Ultimate 32 bit, and I can't find the driver for the serial port. Someone help pls.

  PCI\VEN_8086 & DEV_29B7 & SUBSYS_2819103C & REV_02

  PCI\VEN_8086 & DEV_29B7 & SUBSYS_2819103C
  PCI\VEN_8086 & DEV_29B7 & CC_070002
  PCI\VEN_8086 & DEV_29B7 & CC_0700

  Hello:

  You need this driver...

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=3459243 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dvc_78665_2%257CswEnvOID%253D4053%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

• virtual serial port

  I have a portable satellite wih only USB ports, now I have a GPS18USB but the Route66 programm wil only work with a gps series. I have now that it is possible to create a virtual serial port that can help me and tell me how
  email please at [email protected]

  Hello Hans,.

  I had searched the internet on installation of a virtual COM port, but I only find solutions based manufacturer. So I think that the driver or the software that generates the virtual COM port is based on the product that you (in your case, the gps system).

  The manufacuring company request a solution!

  But if they don't have a solution, I found a link on the internet that might help you! But if you want to test I will assume no responsibility for the consequences such as loss of data after a system crash.

  http://www.ftdichip.com/FTWinDriver.htm

  Good luck!

  Sam