Serial RS232 adapter USB-issue

The question that I have is Windows "forget" that he uses the device.  I will transmit data, and all goes well when the transfer suddenly stops and the program I use wrote that the device settings are wrong.  But the device still shows to work correctly in Device Manager.  I try another program and it does the same thing not programs.  And the question is the blindly.  He'll run right for hours and showing a defect. or he'll do all day every few minutes.  Don't know what to think.  These issues would be present with a PCMIA RS232?  I have a slot open in this laptop to try if you think he can.  I just need an option that I use this to DNC my CNC machining centers here at work.  So it should work right or get the scrap parts.   Any information is greatly appreciated.

Thank you

Bryan

Brian those can be very problematic. Check with the support of the manufacturer if possible for all known
questions. Back in the day, I used to pull my hair out trying to fix problems with those, dongles, and
similar material.

Check also with the support of any device you use the adapter - maybe there is
updated drivers.

Definitely check with support of system manufacturer (manufacturer of motherboard for customized systems),
their documentation online and drivers and ask questions in the forums about known problems.
Update the BIOS, chipset of low level driversand the major device on-board and separate
drivers. These all can have an effect on your question.

You are running an antivirus? If for those that cause problems with the adapters. If you need a
Antivirus on the system I'd use MSE - free. Uninstall all 3rd party antivirus then
run the removal of its creator tool to avoid problems causing remains.

List of tools to clean/uninstall anti-malware programs
http://answers.Microsoft.com/en-us/protect/wiki/MSE-protect_start/list-of-anti-malware-product-removal-tools/2bcb53f7-7ab4-4EF9-ab3a-6aebfa322f75

Uninstallers (removal tools) for common antivirus software
http://KB.eset.com/esetkb/index?page=content&ID=SOLN146

MSE - free
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • USB to RS232 (adapter OR or not)

    Hello:

    I have to use a USB-RS232 adapter to connect my laptop to a device for the control.
    The control will be through LabView library VISA.

    However, I found that the price for the USB-RS232 adapter varies a lot.
    NOR has one (http://sine.ni.com/nips/cds/view/p/lang/en/nid/12844), more than 100 books, whilte there are many other USB-RS232 adapter costs only 10-30 pounds in other locations.

    What I wonder if do USB-RS232 adapter or this price?
    Is there a compatibility issue (single adapter of NOR is compatibile to LabView?) or other conduct issues I should be aware of?

    I just want to understand the difference between adapter OR other less expensive adapter before making the purchase (but I will not avoid the issue of compatibility)

    Thank you very much
    Best regards, Jhensi

    Jhensi,

    There are many companies making USB-RS232 adapters that work with LabVIEW using NI-VISA.  The problem is that some cards drivers are not fully compliant with the RS232 specification.

    Another thing to consider is the isolation.  If you are in an industrial environment you wish to an isolated USB-serial adapter.  Personally, I use adapters of NOR and electronics of B and B.  If you search the forums you will find other manufacturers mentioned as well.

  • Serial RS232 directly to a USB DAQ?

    Hello

    I have a question about serial communication: is it possible to directly connect a device through RS232 serial to digital pins of an acquisition of data USB-6211? (Or perhaps even a USB-6008?)

    If so, where should I wire the pins to?

    If this isn't the case, could you recommend me a not too expensive, but functional RS232 to USB adapter that could work well? (I plan to interface a capnometer Datex or an infusion of Fresenius pilot C pump first, but if I could find a relatively cheap multi-port adapter I'd both. BTW, can I include more NI-VISA requests in parallel in LabVIEW?)

    Thank you

    No, you cannot use a DAQ hardware to simulate a serial port.

    I do not have a specific recommendation for a seller, but I've had much better luck with adapters built with a chip from ftdi than others. Google "usb to serial adapter".

    You can have multiple threads of communication with several cards.

  • A prolific USB-serial driver adapter

    A prolific USB-to-Serial driver adapter adapter causes files are corrupt and slow system to respond to commands and keyboard actions.  How can I fix it.

    Hello

    You can try re-installing the driver, and if this does not work, it could be a bad cable.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Charger C - USB plug-and - adapter USB - C will not fully inserted

    We can insert is more completely the plug of charger USB - C OR USB - C adapter (USB - C, USB - A and HDMI).  They stopped short about 1-1, 5 mm.  Food is always delivered, but a very small movement can cause the power disconnected, even if most is still mainly in.  Data connections may be lost in the same way with potentially catastrophic effects.

    Is this a warranty issue?  It's rather disturbing if USB - C plugs/Sockets can fail if relatively fast especially in this case it's an all-Apple above adapters line and computer.

    Yes, usb ports a and c have a very known issue that no one is really writing.

    Is waved from time to time, the connections inside stops working. Also, I tested the adapter, you speak of and it heats more than all of the time and some time. Sometimes if give you him just an hour or two break and then it goes back to normal. His strange indeed.

    Also, I recommend the update to 10.11.3. There has been many corrections of bugs.

  • Iconia W4-820 will not charge with the power adapter USB Std

    Bought my W4 Iconia four weeks ago, a demonstration model, the last of them. It was packed in the box with a micro USB x adapter USB OTG cable and a power adapter. Back at home I discovered that the power adapter has been to Asus, possibly mixed in the shop. The prospective buyer of the Asus Tablet demo likely will get the Acer adapter. Adapter Asus with micro USB male connector works fine; specs are 5.2V - 1.35 amps; seems to be a STD USB adapter. The Asus adapter has a connector to USB female port to connect to a USB x microphone cable to USB adapter (with cable power adapter came in the box). Bought a 2nd power with USB 2 socket adapter to connect my W4 Iconia and my Garmin Zumo390 browser to an adapter. Specs are 5V - 3.5 amps.
    The Zumo works very well with the new card, but does not work my W4. Charge light stays off. USB ports switched to he Zumo and the Iconia W4, but same result. Zumo fresh, but W4 not. Borrowed another power adapter USB, 5V - 2 mines anti-personnel and new Zumo accusations, but the W4 still does not work. Also tried different USB adapter cables, but the same thing; Zumo invoice, W4 does not work.
    How is that possible? I can't tell the difference of 0.2 V between the Asus adapter and a USB adaptor STD would make the difference. But maybe I'm wrong. Wanted for adapters for the W4 Iconia and found several, but all the 5V as expected.
    Can anyone help.
    Will go to the shop again next week, but if I need an adapter V 5.2 I should order with Acer. 5.2 V adapters do exist not (readibly).

    Resolved issues. A dark and humid Sunday afternoon back to the store with the Tablet and all the bells and whistles. Changed the card Asus for the original Acer 5V - 2Amps (10W). Took the time to find the Acer adapter in the store. Demonstrated the adapter 2nd with 2 output USB ports and it wouldn't work with the Tablet W4. Tried another and found to be ok. 2 USB ports have a different power, a port for a smartphone and the other port is one tablet. Total power rating of the adapter is 17.5W (5V - 3.5Amps); some 2.5 and 1Amps. A happy man is back home again.

  • Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

    Is possible to use a USB key as a mobile phone memory card? I don't speak of MicroSD adapter / USB, I mean a real USB?

    Hello

    It is possible in some cases - Adpater, power and the ability to read the disc
    are the issues.

    Check with the manufacturer of phone and the USB key and their forums.

    How to: use your USB with the Nexus 7 [root]
    http://www.androidcentral.com/how-use-your-USB-flash-drives-nexus-7-root

    For phones Windows ask in this forum and check the support.

    Answers - Windows phones
    http://answers.Microsoft.com/en-us/WinPhone

    For other phones check with their Support and Forums.

    Support of SanDisk and Forums (and others) would be a good source of info.

    SanDisk - Support
    http://www.SanDisk.com/SanDisk-support/

    SanDisk - Forums
    http://forums.SanDisk.com/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • MacBook does not connect to Philips TV with adapter USB - C

    Recently, I bought USB Apple-C (very expensive) adapter for my Macbook from 2016. When I connect the computer to my Philips TV via an HDMI cable, after some initial flicker, I see a stable picture on the TV. The problem is that the hard stable image usually less than one minute. This flickering cycle and temporarily stable image is repeated several times until I have finally get an error message on the TV that says "video Format not supported" and the screen turns white.

    The HDMI cable that I use works perfectly with a Sony laptop connected to the TV even. Adapter USB - C has been also updated after I bought it.

    Someone has the same problem with their TV?

    Hello

    You are able to test it on another TV, with another HDMI cable?

    If it all works, I might suggest to return the adapter HDMI Apple and get another via online service or your dealer.

    Using the USB - C port and adapters on your MacBook (retina, 12 inch, early 2015) and later - Apple Support

  • My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

    My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

    The photos are not stored on the sims, sorry.

    You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

    Recovery mode:

    Turn off your iOS device.

    Plug charge cable to the computer only (not to the device yet).

    Open iTunes on your computer.

    Hold the button to power on your device and do not let go.

    Plug the cable into the device while keeping the power button.

    Wait for the computer to detect the device and wait that he eat.

    Restore as New first, then restore sauvegardΘ if you wish.

    https://support.Apple.com/en-us/HT201263

  • Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

    Apple Watch magnetic charging Dock is compatible with the adapter USB 12W power and if so, is the adaptor 12W shorten the charging time?

    Yes and no.

  • DV7 - 7333cl: how to extract usable data from a bad drive using 22 pins adapter usb to SATA on the new HD

    Greetings HP Forum,

    Recently, I replaced a bad hard drive on my laptop. I need now step by step procedure to extract usable data from the wrong drive using 22 pins adapter usb to SATA on the new HD.

    NOTE: I can't not all data that especially if some of the software downloaded on the replaced disk can be altered. Should I first download Internet Antivirus to protect my new hard drive? I'm not an expert, or even close to this when you work on the back of the laptop, so I'll have to step by step how to download and to partition the data recoverable and software, etc..

    Thanks in advance for your help... I greatly appreciate it!

    See you soon!

    Wes

    It is not complex. Attach the drive to the adapter and connect it to any other computer with good antivirus and antispyware installed. I use Malwarebytes and Avast. When you connect the adapter with the drive connected to the usb port, the drive will appear and it will be assigned a letter maybe E:\ or F:\ or something else. Immediately, he analyzes with the antivirus and anti-spyware. Quarantine or delete any virus or malware it finds. Then, it's just a matter of navigate the disk and copy and paste the contents of the host computer in a directory for this purpose. Obviously, you can copy from documents word, photos, music files, but you cannot copy the applications like Microsoft Word, iTunes. Photoshop.  You may need to take ownership of the files on the old hard drive, but Windows will guide you through this. Don't know what else I can answer.

  • Adapter USB from Cisco at the HUB of Virgin?

    I think the upgrade on a faster fiber-optic broadband offered by Virgin Media. This new installation will include a combined modem and router known as the HUB of the Virgin. However, I currently have a separate Virgin modem connected to a Cisco router. I use to connect to this wireless adapter USB WIFI of Cisco router.

    The question is: if I know have a cisco router, my adapter USB Cisco will be able to connect to a Cisco routers not?

    Thank you

    Technically it should be. As long as the router is wireless capable, it needs to connect.

  • How to install drivers for "Dell adapter - USB 3.0-HDMI/VGA/Ethernet/USB 2.0"?

    I bought the Dell XPS 13, and I need an adapter to connect to Ethernet:

    Dell adapter - USB 2.0 3.0-HDMI/VGA/Ethernet/USB. -

    How to install this driver? -Will I install it on my "gold statue?

    I cannot join the domain because Windows Setup cannot find the required driver.

    Tried to install the driver as the latest installation command before the restart, but without success.

    No one knows how to fix?

    Hi Wooltown,

    ImageAssist does not support devices that are not included in the system.  If you want to integrate support for the driver, you can follow the instructions mentioned in the following post.

    http://en.community.Dell.com/TechCenter/enterprise-client/f/4916/t/19603435

    Thank you

    Tyler

  • Can I use a USB B Female adapter USB A Female in a HP Pocket Media Bay?

    Can I use a USB B Female adapter USB A Female to transform the unused HP Pocket Media Bay of a s3230uk in an area of loading of MP3?

    Surely a small load player would take less power, then a HARD drive?

    I can confirm it works and is a good way to make use of the space.

  • Micro adapter USB keeps disconnecting when I try to copy the files.

     
     
    Micro adapter USB keeps disconnecting when I try to copy the files.

    Hello

    I have a Micro SD card reader, when I insert my memory card into the reader, he comes and stays there until I try to transfer files to the memory card, or if I run a h2testw test it disconnects.

    Its getting boring, I bought another card reader, but the same problem persists. I tried the drive in my computer and it seems to have worked here, but just on my laptop, I'm having problems.

    Any help will be appreciated, thanks in advance!

    Hello

    1 did you change on your computer?

    2 did you receive an error message?

    I suggest you to check with the other USB port.

    Method 1:

    Tips for solving common driver problems

    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

    Method 2:

    I suggest you to remove and reinstall all USB controllers

    To remove and reinstall all USB controllers, follow these steps:

    (a) click Start, click Run, type sysdm.cpl in the Open box, and then click OK.

    (b) click on the Hardware tab.

    (c) click the Device Manager button.

    (d) expand Bus USB controllers.

    (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

    (f) restart the computer and reinstall the USB controllers.

    (g) connect the removable USB storage device and perform a test to ensure that the problem is solved.

Maybe you are looking for

  • I don't want this button to update

    Hello I have an old iPhone 4S and an old Macbook for mid-2010. I think that when your hardware is old, it is best to stop the update. But the Appstore keeps prompting, and it is very very annoying. Why Apple does not add a button: "I don't want this

  • cannot migrate emails from thunderbird on my new computer.

    I'm moving my thunderbird on my computer windows 7 on my new computer windows 8.1. I backed up my old profile on my old computer and put it on a flash drive. Then, I downloaded thunderbird on my new windows computer. It does not recognize my old info

  • USB disappeared from network preferences

    USB no longer appears as a network option to connect to my iPhone 6 per Hotspot. I turned turned & on iTunes; I downloaded and reinstalled iTunes; I turned off & on my MacAir & my iPhone, wifi Hotspot off & clicked on the small + button in prefs netw

  • What is nsTaggingService.js

    Windows 7 businessFirefox Something added about 4500 Favorites in doubles for my bookmarks toolbar folder. Almost impossible to remove. Does that mean something to someone?Resource://GRE/components/nsTaggingService.js:312? Can't find anything definit

  • Could not start up - which option to choose?

    When I started my computer, the message "the last attempt to restart the system from its previous location failed.  Try to restart again? "I then 2 options" Delete restoration data and proceed to the system startup "or"continue with system restart. "