Series of HP Pavilion 500 PC - 201 a, some missing software after installing windows 7

Here's my hardware ID.

HP Pavilion 500 PC series

Model No.: 500-201 a

Windows 7 64 bit

PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF7103C & REV_0C
PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00

Any help would be appreciated

Hello

Please try:

1 PCI\VEN_1814 & DEV_3298 & SUBSYS_18EC103C & REV_00
   http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58944.exe

2 PCI\VEN_10EC & DEV_8168 & SUBSYS_2AF7103C & REV_0C
   http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64531.exe

3 PCI\VEN_1814 & DEV_3290 & SUBSYS_18EC103C & REV_00
   http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59828.exe

Kind regards.

Tags: Notebooks

Similar Questions

  • No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home

    No sound on HP Pavilion a6077c desktop pc speakers after installing Windows 7 premium Home. Any suggestions on how to solve the problem?

    Thank you. This site help me solve my problem.

    http://www.Realtek.com.tw/downloads/ExpressFTPSite.aspx?DownTypeID=3 & DownID = 558 & PFid = 23 & Conn = 3

  • Can I use all 500 GB on a hard drive, I have install windows 7 and it only uses I think 466 around this amount, why is - this

    Can I use all 500 GB on a hard drive, I have install windows 7 and it only uses I think 466 around this amount, why is - this

    Hello Edtannjr,

    Thank you for your message.  Remember that the operating system itself takes place and many OEM systems contains a recovery partition which can take up to a space as well.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

  • HP Pavilion 500-130DE: HP Pavilion 500-130DE do not see the graphics card in windows and can not change the primary graphics card.

    So I got a new (TG 640) graphics card for my pc. I tested it on another computer the day before. Worked well. I plugged my HP Pavilion 500-130DE and started. I changed my slot onboard DVI cable to the GT 640 and cable says no signal. While the pc was still on I switched the cable back to the integrated graphical location motherboard and got the windows login screen. So I thought that BIOS yet configured when the integrated graphics card (Intel HD 4600). I turned off the pc and booted to BIOS. But I've never seen a such limited BIOS before! Only thing you change is boot order. I saw a tab advanced but could not find the settings that I needed. In the only device manager devices that appears is the HD 4600. So I checked power is 300W should be sufficient for a map of 75W (only need the PCI for power). Someone knows how to fix this?

    Hello

    After the PC starts to open the window RUN and enter: MSINFO32

    If the BIOS on your PC version is version 8, and then review the information below.

    HP Secure Boot Windows 8 themes Computer does not start after the installation of a video (Windows 8) card  

    A word of warning: the reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

    Thanks for posting on the forum.

  • HP Pavilion dv6t-7000: Please HELP! Fetching drivers after the Windows Setup

    Hello

    I think I messed my laptop pretty badly. I have improved my Win 7 Home Premium x 64 to win 10 by using Windows Update, but I have stumbled on the question of the "black screen" and could not solve the problem, so what I did was reinstall my windows using a Windows 7 Ultimate x 64 configuration, which was a huge mistake.

    It seems I've lost not many things after installing, but I want to fix right now is internet connection and USB connection. Currently, the only way is to Exchange data with my laptop via a CD. It seems that my laptop cannot recognize a cable ethernet as a removable storage device, and I guess that's because I'm missing a bunch of pilots:

    The 'Ethernet controller' used to be among the "other devices" with an exclamation point, but I just installed the Realtek PCIe (SP63213) thing and it appeared under 'network adapters '. I guess it has something to do with the issue of cable internet, but did not check whether it has been fixed or not. [Edit: it has indeed fixed the issue of the internet.] At least now I have internet connection]

    As you can see, there's quite a few other drivers missing as listed in the section other devices. I tried the update driver option, but could not do everywhere. If I choose "Browse my computer for driver software", then "Let Me pick from a list of device...", then "select type your device... "I'll get to a long list of many things (screenshot below) and I have no idea where I should go from here.

    I tried to select some items, but still got the error "the device could not be started."

    So, my questions are: how to get all these missing drivers? How can I make my phone able to recognize again the USB? Can I really fix these just by choosing the correct point in the list above (which means that I will not need internet connection)? Or I have to download the correct stuff on the internet?

    My laptop is a HP dv6t-7000 CTO Entertainment Notebook PC. Now, my OS is Win 7 Ultimate x 64. It would be of any help, the hardware for the controller (USB) ID are:

    PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C & REV_04

    PCI\VEN_8086 & DEV_1E31 & SUBSYS_1818103C

    PCI\VEN_8086 & DEV_1E31 & CC_0C0330

    PCI\VEN_8086 & DEV_1E31 & CC_0C03

    I had trouble yesterday and I am totally at a loss right now. I'd appreciate any help. If additional information is needed, please let me know. Thank you very much for your answer.

    We can always hope

    Hello:

    Here are the links for most of the drivers you need except the network (wireless card) controller.  I need to have the hardware for this ID, because there may be more than one model wireless network card installed.

    Game chips and graphics...

    First install the Intel chipset driver and restart (smbus controller).

    This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

    File name: sp56156.exe

    Then, install the Intel HD graphics driver and restart.

    This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp56808.exe

    Then install the HD graphics nVidia Driver and reboot.

    This package provides the driver that allows the graphics from NVIDIA high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp59787.exe

    Audio: Installation and reboot.

    This package contains the driver that allows Audio IDT high definition (HD) in the notebook models that are running a supported operating system.

    File name: sp57966.exe

    PCI device:

    This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

    File name: sp56166.exe

    Simple controller PCI of Comms:

    This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

    File name: sp56158.exe

    USB3 controller:

    This package provides the driver for the Intel USB 3.0 controller host for the notebook models and operating systems. The driver allows USB 3.0 devices.

    File name: sp56164.exe

    One of the unknown devices probably has this driver...

    This package provides the HP ProtectSmart Hard Drive Protection software (HP 3D Driveguard) for the laptop models running a supported operating system. HP (HP 3D Driveguard) ProtectSmart hard drive Protection software protects the hard drive of "parking the heads ' if the laptop fell accidentally, or is suddenly hit by another object.

    File name: sp61037.exe

    The other unknown is probably this driver...

    This package contains the driver that allows the validity fingerprint sensor in the notebook models that are running a supported operating system. The fingerprint sensor analyzes fingerprints for use with biometric security applications.

    File name: sp56403.exe

    You can find all drivers and most of the software you need for your model on the link below.

    http://h22207.www2.HP.com/us-en/drivers/selfservice/HP-Pavilion-DV6-7000-entertainment-notebook-PC-series/5226230/model/5273697

  • No wifi after installing windows 7 on hp pavilion g6

    Hello

    Could you guys help me please with my hp pavilion g6 with the product ID number A4G31AV and pci\ven_1814 & dev_539a & subsys_1839103c & rev_00.  I installed windows 7 on my laptop, but I have all the drivers so my wifi is not workink I can not automatically install the. Please help me as soon as POSSIBLE.

    Thank you very much

    Reka.

    Hi Reka,

    If necessary, download and save the following Installer on another PC, then transfer them to your laptop and run them.

    First of all, download and install the Chipset driver at the following link.

    Chipset Driver - Windows 7.

    When this has completed, restart the laptop.

    Then, download and install the WLAN driver from the link below.

    WLAN Driver - Windows 7.

    All drivers for your laptop can be found on the following link.

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 5278311 #n300

    Kind regards

    DP - K

  • HP pavilion g6-1159sa: after installing windows 7 home prem 64 bit disk a hard nine, I can't get internet connection

    Hi Please help me im not witty but here's PCs. I have a hp pavilion 1159sa g6, product no.-ls294ea #abu

    I had to install a new hard drive for my laptop I did without any problem - the hard drive was the easy bit. then I had to install microsoft windows 7 Home premium 64 bit (clean install) I've done after browsing the web on how to exactly to install windows 7 using a guide step by step useful, I found, all that has happened to the plan. but after the installation, I could not without an internet connection, the ethernet cable wireless or directly using the router.

    im guessing that I have missing drivers? & it is were im stuck! as I said im a complete Newbie, so I would really appreciate your help to try to connect again. I use a different computer, so I can download the drivers, I need usb key, but I don't know what drivers :-(

    I look forward to hear from you, but please explain in simple terms on how should I proceed, thank you very much for reading, I hope you can help I am desperate.  Thanks again.

    You are the very welcome.

    Here are links to the drivers you need...

    network controller:

    This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

    File name: sp56942.exe

    Ethernet controller:

    This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

    File name: sp55031.exe

    PCI device:

    This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

    File name: sp55030.exe

    Simple PCI communications controller:

    This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

    File name: sp52795.exe

    In addition, don't forget to install the graphics driver.  A missing graphic driver normally does not appear in the category other devices.  If a PC does not have graphics drivers installed, under the category of device display cards, there will be a device named Standard VGA adapter if the graphics driver must be installed.

    Your model, you should see an Intel HD graphics adapter.

    If you see a Standard VGA card, then you must install this graphics driver...

    This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

    File name: sp55027.exe

  • HP Pavilion x 360 n014na: HP Pavilion x 360 n014na touch screen not working not not after installing Windows 8.1

    Please help, I'm desperate.  I searched for weeks without any solution.  I have a HP Pavilion x 360 n014na, when I bought it I installed Linux immediately and have been using it this way without problem.

    However, I decided that I wanted to go back to 8.1 for Windows as the main operating system.  I was not able to make a USB recovery in time when I bought the laptop, so I used a legal copy obtained directly from Microsoft.  It has detected my BIOS on the product key and activated correctly, all devices work.   Except the touchscreen unresponsive.

    I went to the support page for my machine model, downloaded and updated all the drivers.  There is NO drivers for the touch screen.  I contacted Microsoft, the drivers are provided by HP and they have not.

    I have seen that others complain and no resolution, just a pointer to a page for Windows 8 (not 8.1) with outdated information.  It is NOT a hardware problem.  It IS a driver problem, IE. There is no driver available anywhere.  I am not a novice, I have worked with computers professionally for decades.

    Need help please, I just need a link to the driver, not a page with obsolete or non-applicable information.

    No, no.  Having to purchase replacement media is not a solution.  I said I got a legal copy of the Microsoft Windows Installer, I have a product key integrated in the BIOS.  I won't spend more money for something that I own.

    As it is a common complaint, here's what I did:

    The solution was to check the HP drivers for I2C and GPIO are present and loaded correctly, he will be seen in the device under "Human Interface devices" Manager  They appear originally HID-compliant touch screen driver, get these right and the touchscreen should work after a reboot.  I had to install both times that something must have gone wrong the first time.

  • Pavilion p6744y: HP Pavilion p6744y DVD-ROM does not not after installing Windows 10.

    I have recently installed Windows 10 on my Pavilion p6744y. Since installation, the DVD-ROM does not work correctly. This worked perfectly before the upgrade of the OS and is the original drive installed by the manufacturer.

    Spin discs and the light flashes, but there is no response from the computer. DVD - ROM does not appear in Device Manager and has been confirmed as "ENABLED" in the BIOS Setup screen. All wires and cables are attached and tight.

    The HP Support Assistant is installed and confirms that all the drivers and software are up-to-date, like Windows Update.

    Microsoft contacted for support and remote access to the PC. They have attempted to install an updated driver, but have been unable to find newer and easier to apply than the drivers already installed drivers. They were unable to solve the problem and advised me to contact HP. Contact HP is not useful because the PC is out of warranty and they expect me to pay for the support.

    Help, please. I suspect all that I need is a updated driver to make the DVD - ROM communicable with 10 visible Windows.

    I know a little about this stuff, but I'm certainly not a computer "guru". Please keep the simple resposnes with easy to understand by a layman terms.

    Thanks for your help!

    I FOUND A SOLUTION!

    Research in the blogs of support paid off in a big way. A minor registry editing is all it took, and my player works like new!

    Here is the solution. My system is Windows 64-bit 10.

    Resolution 5: Create a registry subkey
    Note to use this method, you must be logged on to Windows as an administrator. If you need help, check that you are an administrator, go tohttp://support.microsoft.com/gp/admin
    Important follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you edit, back up the registry to restore in case of problems.
    To create the registry subkey, follow these steps:
    Press the Windows logo key + R to open the run. (or right click on the windows down icon to the left)
    Type regedit in the run box, and then press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
    In the navigation pane, locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\atapi
    Right-click atapi, point to new, and then click key.
    Type Controller0 and press ENTER.
    Right-click Controller0, point to new, and then click DWORD(32-bit) value.
    Type EnumDevice1 and press ENTER.
    Right-click EnumDevice1, click on change...
    Type 1 in the value data box, and then click OK.
    Exit Registry Editor.

  • 500-189 Pavilion: Pavilion 500 - 189 DTS Sound + Equalizer does not work in Windows 10 Pro

    I have upgraded to Windows 10 (Pro). The sound works, but now the equalizer of the + Sound DTS Panel settings have no effect. Is there an audio control panel to update can you tell me? Thank you!

    Problem solved: I uninstalled the IDT High Definition Audio CODEC (Device Manager > sound, video and game controllers) then restarted. Now it's working.

  • Pavilion 500-314: EFI Shell is missing

    I'm trying to update the Firmware on a controller PCI HBA, IBM M1015 and I desperately need to access an EFI Shell.

    That is available for this computer UEFI?  How do acess or where can I download an image to create the appropriate key?

    Ed

    @Callsteward

    Review of this article.

  • HP Pavilion 500-274ea: Hello, I need help please I installed the graphics card and nothing comes only a black screen

    Please help me I bought a new power supply 780w I had 2 graphics card work in my old pc, but on the new pc they do not fan spins everything well but no screen when I plug my graphics card? What should do?

    http://support.HP.com/us-en/document/c04177680

    It comes to my pc

    I fix thanks for reading. I just had to play in the bios for a bit lol like 2 hours but I did the job

  • Some problems after installing Windows 8 on the Qosmio X 500

    Hello
    Sorry for my bad English...

    I have a qosmio x 500 PQX33E. I installed the upgrade of windows 8.
    But I have problems drivers.

    For the eco mode, the digital key does not respond.

    For the HDMI to the TV connection, before the connection is automatic. With windows 8, I have to do manually.

    I had to disable the optical driver to operate the bluray player.

    And several other pilots missing for windows 64 b 8.

    Do you know if I can use a different drivers, qosmio, qosmio x 875 as?

    is that Toshiba will create windows 8 drivers for our old machines and other qosmio?

    Thank you very much for your answers.

    > Do you know if I can use a different drivers, qosmio, qosmio x 875 as? Is that Toshiba will create windows 8 drivers for our old machines and other qosmio?

    As far as I know Toshiba released an official list of old Win 7 notebook series that will save 8 drivers and support.
    The matrix to win 8 can be found here:
    http://EU.computers.Toshiba-Europe.com/innovation/JSP/checkWindows8Compatible.do?service=EU

    As you can see, the Qosmio X 500 series is not that is why I think that Win 8 drivers will come out of this show.

    But in some cases, you can use the tools to win 8 who were released for other series.
    As for example the VAP Toshiba to win 8.

    However, this does not mean that everything will work as in the past using Win 7

  • Pavilion all-in-one 23 q011a: no sound after upgrade windows 10

    Operating system is window 10, do not know what bit. Sound works well on windows 8 that came with the computer after the upgrade to not win 10 no sound. Reflected on the line and tried to change the bitrate and the speaker on the range. Have reset the computer - still no sound. Thank you

    Have you installed the audio driver Windows 10?

    http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71569.exe

    You can find all other 10 Windows drivers available for ytour all-in-One PC at the following ADDRESS.

    http://support.HP.com/au-en/drivers/selfservice/HP-Pavilion-23-all-in-one-desktop-PC-series/7902091/model/7842738#Z7_3054ICK0KGTE30AQO5O3KA30R1

  • HP Pavilion x 2 10-n011nl (Suns: laptop locked after upgrade windows 10)

    Two days ago, I bought a HP Pavilion x 2 (red sunset) 10-n011nl and immediately I started upgrading Windows 10. This medication is ok (no error message), but the first new starting system, the machine is in a loop! Only a black screen with white logo of HP and animation circular points. It is impossible to stop this, none CTRL-ALT-DEL or other. I have to wait for low battery condition (more then 6 hours!).

    And even once, he repeats the loop.

    What can I do?

    Thanks in advance

    Because it is new, maybe start to type Esc as soon as you press the button start.  That should bring up a menu before starts the boot process.  In this menu, click F11 to run the recovery.  Who will restore the PC to 'new factory' and retry the upgrade of Windows 10.  You might want to try the media creation tool page, if it fails again.

Maybe you are looking for

  • speaker

    I can hear other people through the speaker, people can hear me ok but I don't even know if I was connected unless I have use the speaker to hear callers. I have checked the volume, the soft reset and have turned off the Bluetooth. No the above steps

  • How to stop the sidebar from popping up when I drag my mouse to the left?

    I've updated OS for my Mac at El Capitan this week, and since then, when I use safari mode full screen and the mouse touches the left side of the screen, the sidebar is displayed. It is very annoying, and I don't know how to remove it. Does anyone kn

  • Gateway NE56R41U Specs?

    I have a customer who was sold a NE56R41U Gateway, it being understood that this laptop has a touch screen installed on standard. Is this true? I can't find any information on this subject. Help, please.

  • My ISP is spelled when I set up Outlook Express. I get an error everytime I try to use it.

    Outlook Express problem The address to which Outlook Express shows when it is trying to connect to my ISP is misspelled (Comast rather than Comcast) for an error message shows everytime I try to use it. When I go to run and then Control Panel there i

  • I downloaded a movie on Torrent & don't know how to display

    I downloaded a movie on my system & don't know how to display