Series: printing problems

Hi - I've had my printer not long and I went to use it today for the first time. It's the fine print size letter however only but I changed the settings on my computer to A4 but is still printing letter size? Anyone has any suggestions please?  :-)

Hi @Jess96,

Thank you gettig back with the good news!

Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
 
Thank you!

Tags: HP Printers

Similar Questions

  • HP Photosmart 3300 series printer problem

    1 printer is not fully recognize black cartridge HP.

    2. request for info on the forum and the response that the thread has been moved. Clicked on the Web site, but not be able to access the news.  Help!

    Your question has been moved to the forum hardware and drivers , where he received a response.  Here it is:

    Printer HP Photosmart 3300 Series no longer recognizes full HP black ink cartridge.

    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Problem of print dialog box. Cannot change the selection of the printer. Box is stuck on Canon Fax series printer in the dialog for some programs, but not all programs.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas:

    • Adobe Reader; Mozilla Firefox will print for the Canon Fax (not my default printer) series.  I am trying to print on a printer HP 7300, which is my default printer.
    • I can print to the printer HP 7300 of Microsoft Word and Internet Explorer
    • I have very limited ability to print from Microsoft Outlook, but the number of copies is out of control
    • There is no error message
    • Problem started after a power surge
    • I did a restore of the system for the period before the problem started, but it has not set a problem.  I also ran the Windows Print diagnostic program but found no problem.  I ran McAfee virus scan and found no problem.

    Hello
     
    Your printer is connected to a network?
     
    I would like you to follow the steps mentioned below.
     
    Step 1:
     
    Restart the print spooler service, set the default printer.
     
    a. Click Start, type "Services.msc" in the search box
    b. in Services, right-click on print spooler and then click Properties.
    c. click the Dependencies tab. The first box list all system services that must work for the print spooler start.
    d. take note of each service, click OK, and then restart each print spooler service based.
     
    Step 2:
     
    Update your HP driver 7300 series printer and check if it helps.
     
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • C6180A: Network printing problem series C6100

    Hello

    I pray that someone here can help with my network C6180A impression of questions, as I am at a loss to know what to do. I'm technical enough for a layman (not irritable) so able to fix my printer problems, I had to do several times in recent months. However, I am now in a complete deadlock as to what to do next.

    Implemented - laptop HP Pavilion (less than 1 year running Windows 8.1 64bits) connected by wired home network using Netgear HomePlugs, on which my C6180A All in One Photosmart printer is also connected by a Homeplug Netgear network around my house for others to use. The network software Netgear genius picks up the printer and it shows on the fine network. I can also access the IP address of the printer through my thin Firefox browser.

    Printer C6180A is (I think) about 8 years ago and has been well used with over 44 K printed pages! It worked well overall until recently. Minor problems have been solved in the past, which I was able to do very well.

    Until recently, the printer worked very well, so a few weeks ago (nothing has changed on it, or my laptop), it just started to stop printing and also started to enter spurious characters (always number 7) on the LED panel without doing me anything, as if someone was going to put in a fax number. It would show a string of 7 like this: '7777777777777777777' as a fax number alone.  Yet I did not or use the fax on it more. It's where I wondered about capacitors, as I mention below...

    However...

    It will not print many pages at once of all today - even if I get it print OK. It does not go offline (it used to do this), just print job gets stuck in the queue and must be deleted using HP Print & Scan doctor. Nothing else removes the queue now. And no other problems are reported with this utility. If they are, then I have Setup or the utility corrects.

    I did the following to get it fixed so far (with little success ongong):

    -updated and install printer via the HP website drivers (most recent is dated December 6, 2015)

    -uninstalled and reinstalled the driver software several times = sometimes a test page impressions, not always

    -restart the laptop and printer each time I do this to clear no matter what cache

    -Remove and add the device in Control Panel = got a few pages printed today this and nothing else then prints

    -check the IP address of the printer to make sure that his recognized on the network = all fine here (IP address added manually in the settings of the network on the printer a few months ago), although I can't make it here anymore as the "ok button" on the printer does not work now (minor in question not related to this in my opinion)

    -did a hard reset of the printer using the # and 6 to do this = it worked for a few pages then orders

    -printer is always / recognized by any software, driver or utility HP PSD when turned on to be detected to install

    -printer works fine when connected directly via a USB cable, but which is not what I want to do on a daily basis

    -have contacted Netgear in the recent past to make sure that my HomePlugs on my network worked very well, they were. If not, then the printer would not be detected by any software installation or fixing with HP PSD

    My last resort will be to check if the capacitors are down, I saw in other forums that this is a common problem after a while on these printers. Before making this "repair" I bought the capacitors, I wanted to check if there is anything else I missed that I can do to finally once and for all this problem of printing.

    Help on this would be so MUCH appreciated by any expert here, because I lost so much time, days in fact, try to resolve this issue as you can only imagine. I have to be able to print for my business. It is not an option to replace the printer currently.

    It worked fine until the last 3-4 weeks or more... Where my question detailed with what I did to fix it until now.

    Thanks in advance. ANIA

    Hello @AZS1,

    Welcome to the Forums of HP's Support. I understand that you have a problem with your C6180A. I would like to help.

    To be honest, you did some troubleshooting. To say that you are quite technical for a layman seems to be an understatement.

    I provided you with a link to solve network problems. If the problem persists then you might as well go ahead with the repair. The only other option would be to have fix the printer.

    "Printer not found" error message for printers all-in-one HP Photosmart C6100 C7100 and Officejet Pro L7700

    Please let me know how it works. I'm pulling for you.

  • Problem with auto feed mechanism doesn't work only not with the Lexmark X 2500 series Printer running Vista

    In my view, the auto feed mechanism does not work.  No matter how I load the paper it says either it is not loaded correctly (which is) or it is a paper jam (which is not the case).  Recommendations as to what it will take to get my auto paper feed printer so I can print?  She will not even feed myself manually one sheet at a time, not to mention two or more sheets.  Thank you.

    http://support.Lexmark.com/index?page=localeSelect&jumppage=home

    The best thing to do would be to contact Lexmark on the Lexmark Support link above.

    http://support.Microsoft.com/GP/printing_problems

    And also read the above Microsoft information about printer problems.

    See you soon.

    Mick Murphy - Microsoft partner

  • Printing problem on deskjet 4510 with windows 8.1

    I bought a new deskjet 4510 and have installed via usb on my desktop running windows 8.1. This isn't the impression through products of ms office word, excel etc. and either through wordpad. I can print Notepad files and pdf via adobe reader software.

    I tried HP print and scan doctor who did not find any problem with the printer and print a test page.

    I tried uninstalling and reinstalling, setting the printer wireless to the top but could not do print.

    I looked at the help on this forum and also tried selective installation, disabling all services except when starting microsoft services, but the problem remains.

    Help, please.

    Hey @rshri7869.

    Welcome to the Forums of HP Support!

    I understand that you meet your HP Deskjet printing problems in advantage 4510 series e-all-in-one printer to your computer Windows 8.1. You have included a large number of useful information in your post, so thank you. After reviewing the troubleshooting you have already finished, I came to the conclusion that what you feel is a conflict of driver on your computer Windows 8.1. To fix this please follow the steps below.

    How to add another driver:

    1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
    2. In the start screen, type "Devices and printers"
    3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
    4. In the devices and printers folder right click on your series Deskjet 4510 and left click on printer properties
    5. Left click on the Advanced tab
    6. Left-click on new driver
    7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
    8. Select HP as the manufacturer on the left
    9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
    10. After selecting Deskjet 9800 hit next complete the new driver Wizard
    11. Under the printer properties window, select 'Apply' but do not hit OK
    12. Select the general tab
    13. Rename your printer in HP Deskjet 4510
    14. Click OK
    15. Finally, right-click on your Deskjet 4510 series once more and click on Printing Preferences
    16. Left click on the paper/quality tab
    17. Left click on the dropdown 'Normal' for the print quality down to the right and change its normal fast
    18. Press apply and OK
    19. Try to print!

    Please let me know if the steps I have provided to resolve your problem. Good luck!

  • HP 3050 j610: wireless printing problem withhp3050j610a all-in-one.

    I have been scanning and printing documents regularly. one day during the analysis of a doc a message flashed on the computer screen that there was a communication problem between the computer and all in a printer.it persists over and over again.

    He had no problem with impression then.

    as advised by the media, I downloaded a link . http://169.254.152.74 and saved as a favorite and he used every time I had to analyze.

    yesterday it stopped opening.

    Contact support who advised me to support responsible link.down to print and scan doctor and solved the problem of scanning and it turned into a printing problem. print a test page, it does not print a document.

    After encountering conflict driver down load of troubleshooting, I was informed to uninstall the drivers and the use of the CD that came with the product.i did. without success. scanning is ok.

    However, questions have been confirmed to have been solved by the doctor tool but is not printing. not even the test page. There is no abras to low ink.

    I double clicked on the printer icon when and as advised by the tools, without result.

    I use a laptop sony vaio e series with win7 os.

    Please help me solve the problem.

    Hello @casia15 and welcome to the Forums of HP, I hope you enjoy your experience!

    I see that you have problems printing.  I would try to help!

    First of all, I would say uninstalling the software of the printer.

    Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

    Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

    Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

  • Want 5532 - printing problem

    When I try to print a document on both sides of the paper prints the first side but the second sides is only half or less printed, leaving a large empty space.

    Any suggestions as to what is the problem and how it can be solved if you please.

    I solved the problem by reinstalling the call series printer drivers from the Web site rather than the network on the supplied CD-ROM driver.

  • My HP Officejet 4300 Series printer is not printing-"printer error says"no connection to the computer.

    Original title: My HP Officejet 4300 Series printer not print

    The mistake of the printer says "no connection to the computer. The computer error says: "the printer is offline. All necessary cables are connected. What should I do?

    Hello

    Have you made changes on the computer before this problem?

    I suggest you try this method and check the status of the issue.

    Printer in Windows problems.

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    You can also refer to:

    Resources for the resolution of the printer in Windows XP problems.

    http://support.Microsoft.com/kb/308028

  • Printing problems with XP and Lexmark-documents are just stuck in the print queue

    Original title: printing problems with XP and Lexmark

    Until yesterday, I was able to print OK using Windows XP and a Lexmark Printer series 3500-4500 with wireless capabilities.  Reported network test wireless (on printer) and report indicates that there are no reported problem, also did the diagnostic test and which shows no problem either.  I can't print and documents are just stuck in the print queue - please can someone help, it drives me crazy because it's probably a very simple solution.

    I guess you do not have all of the error messages.

    It is possible that comes to mind that your printer has received a new IP address of your router (this could easily happen if you have several computers and other devices that connect to your wireless network).

    Find the IP address of the printer of his network diagnostic page.
    Click Start > printers and faxes, right-click the printer and select Properties
    Select the Ports tab, then click on the button "Configure Port" (be careful NOT to click anywhere in the list of ports)
    Make sure that the IP address in 'Port settings' is identical to that shown on the diagnosis of your network printer page.

    To avoid this problem in the future, you must configure the printer to have a static IP address.  See your printer User Guide for instructions.

    Choose an appropriate subnet address (i.e., has the first 3 groups of numbers the same as the other addresses in your network) but who is not in the range of addresses assigned by the DHCP server on your router.  See the User Guide of your router for more details.

  • Pavilion 500 series: printer does not complete the print job & error message

    Got a HP Deskjet 2542, but recently bought a new HP, Pavilion of the 500 series desktop computer.  When you try to print a document that is located at 3 pages, it will print the first page, and then part of the second page, then an error message appears.  Went to the HP troubleshooting & tried everything, but nothing seems to fix the situation.  Any ideas or suggestions?

    Hi @Themommy,

    I saw your post about the error message that appears when printing with your HP Deskjet 2542.

    I need a little more information to give you the best course of action.

    What is you receive the exact error message?

    Without this error message, I suggest trying a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing problems. I recommend you to download and run the HP print and Scan Doctor, if she doesn't fix it automatically let me know what errors or messages that you receive.

    You can always try to uninstall the printer software and then by downloading new firmware for you printer. Click on this link to get the all-in-one HP Deskjet 2540 Printer series full feature software and drivers.

    Just note that you may not be able to download the software right now. If you click on the link above and you get this pop-up window, you may need to try the page later.

    Please let me know if these steps solved your problem, or you receive the exact error message.

    I look forward to hear from you!

    Thank you

  • HP OFFICEJET 4500: printer problem hp 4500 doen't pull paper from the bin, hp print and scan doctor did not help

    Paper printer problem hp 4500 doen't pull of the plateau, hp print and scan doctor did not help

    Have you tried that?

    http://support.HP.com/us-en/product/HP-OfficeJet-4500-all-in-one-printer-series---K710/4181269/document/c01969913/

  • Establishment of a used HP Deskjet D1460 printer problems

    Downloaded 140 MB of software and drivers for Windows 7, 64 bit, HP.

    Software downloaded, installed and run OK but when an attempt is made to print the test page, the printer loaded paper then the printhead moved only once all the minutes and paper moved no further.  When the power supply to the printer has been removed and reconnected, the paper was ejected empty.

    Downloaded and run HP printer install wizard for Windows.  It says that the right software and the driver was already installed. When the test page has printed, the printer running at normal speed but only the position line was printed and it had a big drag in the middle where the ink was absent.

    Downloaded and run printing HP and doctor Scan. This correctly the printer as '1400 series printer' but the only listed diagnostic test was "Fix scanning problem" (I also have a HP scanner, but it was not connected to the computer).  The next window is a list of links.  By clicking on one of the 3 links regarding a specific product, provided information about the wrong product: envy 20-d090 TouchSmart all-in - one desktop PC.

    Run the utility from Windows 'clean ink cartridges.  Cartridges moved at normal speed during the cleaning operation, but when an attempt is made to print the test page, the printer loads the paper then the printhead moved only once all the minutes and paper moved no further.

    What should I try next?

    Power off the day the next day and restarted PC, it the next morning. Print a page of a web site map.  The printer worked fine.

  • I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

    I try to install the Lexmark 810 series printer and I am unable to find the driver to download information from the drive to?

    Try to install a Windows Vista driver if there is no native driver Windows 7.

    You can also run the troubleshooting of the printer.

    Open the printer Troubleshooter

    Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under hardware and sound, click on use printer.

    For more information, visit the below mentioned link:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

    Printer problems: http://blogs.technet.com/b/markrussinovich/archive/2010/04/12/3324570.aspx

    Run the printer problems to: http://support.microsoft.com/gp/printing_problems?entrypoint=WHHT

    You can see the below mentioned links.

    http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

    http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

    http://Windows.Microsoft.com/en-us/Windows7/change-your-default-printer

    http://Windows.Microsoft.com/en-us/Windows7/printing-to-the-correct-printer

  • 7520e-all-in-one Photosmart market saturation of the color printing problems

    Photsmart 7520e-All-in-One Printer - have had several printing problems with tints very concentrated prints all pink or all blue or all green or gray.  Place in a new point of sale because I read that it might be a power issue.  This seemed to solve the problem.  The next morning to see the same problem... rising arrrrgh.  Spent by the doctor to print-scanning HP and do you feel test shows I have counterfeit cartridge-[test print shows all alphabet caps and tiny alphabet; color block and alignment are perfect] and please note I have all the authentic color HP cartridges.  Printed quality report and it came out perfect 3 times. Printer a fourth and he came out with lines horizontal ghost on all color blocks.  Again to print and it was perfect.  Print report situation printer and not rated for conflicts.  Is it a power problem, Windows 7 problem - please help.

    Welcome to the community, @ausiluver

    Thanks for a great post to start with!

    Personally, I would say that the problem you describe sounds like a printhead problem and perhaps a cartridge problem, which should dissipate if you try another cartridge. My best advice would be to check the steps in the guide below, make sure that you have tried all the. Some steps may look familiar to you already did some work on this issue.

    If the problem arises again, however, after these steps, troubleshooting, I would recommend contacting HP directly, to see if they have a replacement option for you or for a trade in option.

    The problems of print quality for the e-all-in-one printer series HP Photosmart 7520

    Details of HP:
    If you call in North America, the number is 1-800-474-6836 and if you call outside the United States / Canada: click here.

    Best wishes

Maybe you are looking for

  • How to get a WiFi acct

    How to set up a Wi - Fi so grandson login account can use Nook

  • Which should I buy?

    Discuss on the desktop computer Inspiron 3000 series with 12 GB of ram plus the 23 "touch screen or all in a touchscreen of 5000 series with 23". All other features are the same, and the cost is $ 25 more for a while.

  • problem with the trash

    Hi from Greece.I cannot find the properties of the trash and shows that they are not available and I can't change the icon to the trash. I've found with most of the security I was hitted by two Trojan horses with names (1) TrojanDownloader:Win32 / Re

  • Cisco VPN does not ask for the UN or PW

    I took a cleint with a Cisco Pix. When I connect to the VPN with Cisco VP customer and the PCF, they gave semi-bas just connects, no prompt for username or password. The first question is that the configuration? And how to change that? Looks like a s

  • Why my java Control Panel windows7 opens when I click the icon?

    I am running windows 7 64 bit edition Home premium on my laptop.  I had to do a system restore and now my java icon opens the control panel.  Can someone help me with this problem?  I've deleted and reinstalled my Java as suggested.  My icon is worki