Series read not giving an exit?
If I run my program, the command is sent to the rs232 to start device to transmit data. But when I get to the read block VISA just stalls and does not export anything in the indicator. I joined the program and the communication data sheet for my device. I think that I've put it in place correctly, I'm just confused about what to do to collect data so that the reading function works.
Tags: NI Software
Similar Questions
-
iPhone 6 s read not sim card
Hello
1. first try to test your SIM with another phone
2. go in settings-general - info - for the carrier update
3. you see the carrier icon in the settings? If so try to disable the automatic search and check if there are other carriers detected by your device
4 reset carrier settings
5 force the reboot
6. put your phone in airplane mode
7. restore and set up under a new
8. If no solution-contact information apple
-
Fingerprint reader not working not
HI, I just recently to upgread my laptop operating system from windows 7 to Windows 8.
Everything works well except for my fingerprint reader, his work not at all.
I had downloaded and installed all the drivers from the Web site below, but it still does not.
Can you help me solve this problem?
Product name: HP Pavilion dv7 Notebook PC
Product number: A3V80PA #UUF
Current OS: Windows 8 Pro 64-bit
Press the Windows key + X and select Device Manager. Under biometrics, fingerprint reader not appear without one? or one! icon next to him?
You mentioned that you have installed the driver. Did you also install the program SimplePass found on the link below? I saw a version of Windows 8 for the unit, but the version of Windows 7 can work. If the version of Windows 7 does not work, try right-clicking on the SimplePass program and select troubleshoot compatibility mode to see if it gets it to work.
http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103162-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 5207968 & sw_lang = -
I use VISA 5.3 for reading my serial device... my standard equipment is WELL this device will send four messages of single command given to this instrument... and I read messages through VISA series READ... during the race, the VI buffer displays the messages individually... I need all four messages to display at the same time in VISA SERIES READ BUFFER, in order to find more than this block, I should add from the palette of function.
Disable character of endpoint detection or make four readings where you concantanate simply the strings together.
-
Samsung Gravity S II - installation error: "CDC series is not installed."
Original title: hardware device (Samsung Gravity S II
I bought this smartphone and I tried to connect it to my computer. A message appears saying that the pilot for the series of the CDC is not installed. How can I do that I can synchronize my Galaxy S II?
Samsung Gravity S II - installation error: "CDC series is not installed."
You install the sync software that comes with the "phone. The PC recognizes the "phone and the synchronization software will be running on the computer in order to allow the synchronization."
-
Photosmart eStn C510 series is not a driver error
Sometimes my wireless printer works fine, but other times it is 'offline' when I try to print and when I troubleshoot I get error: eStn Photosmart C510 series is not a driver. I reinstalled the driver from the CD and I also downloaded the driver from the HP website. It will work fine for a while, but then it disappears. I do not understand why and I would find a permanent problem solution so that I can simply print and don't have to waste his time to solve problems all the time. Can someone help me with this frustrating problem?
Hi JeanneDiffenderfer
1. what operating system is installed on the computer?2. do you get errors in the device to the printer Manager?
I suggest you to check and to provide us with the information about the installed operating system.
Also, you can use the HP available for printing and hardware diagnostic utilities and check if this may help solve the problem-http://h10025.www1.HP.com/ewfrf/WC/document?docname=c02073861&LC=en&DLC=en&CC=US&OS=4062&sw_lang=
If the problem persists I would suggest you contact the manufacturer for help support and to check if they can help you get the correct drivers installed for the printer and help solve the problem.
I hope this helps.
-
The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways through the links suggested to solve the problem and nothing has worked.
I turned to the forums and I saw that many, many people have the same problem with Vista SP2 Upgrade. Microsoft and several of its Vista customers realized that Vista has a lot of problems, but people who have need of the service. Being able to download and install the SP2 can make Vista more stable, but I get the same message mentioned above, and so I am sure are a lot of other people who are trying to get Service Pack 2 integrated into Vista.
0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.The error you receive occurs if there is corruption in the manifest of component maintenance base.
Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
http://support.Microsoft.com/kb/931712
"Explains the SFC / Scannow.A repair install is the usual solution of SFC/scannow does not work.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537
Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.
Uninstall SP1
See also:
How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspxTaurArian [MVP] 2005-2010 - Update Services
-
Fingerprint reader not detected
I have a HP Pavillion DV6007ea and all of a sudden the fingerprint reader has stopped working and I get a message that says "the fingerprint reader not detected".
Have tried to reinstall drivers etc but still the same message. Someone at - it experience with this? Is the bad drive or what? I have an extended warranty but do not send it if it's something simple.
Same thing here. Someone at - it a solution?
-
Win 7 Pro. Card reader not detected. Card reader does not appear in Device Manager, or the computer.
Windows 7 Pro. Dell desktop computer.
My integrated card readers (there are 4) do not work. They do not appear in Device Manager. They do not appear in the computer.
In Control Panel > programs and features > I uninstalled the Realtek card reader. Then installed latest version of the Realtek site.
Control Panel > troubleshooting > hardware and audio > configure device > says hardware changes could not have been detected.
Tried system restore, but it failed.
What should I try?
Thank you
Hi Bruce,.
Thanks for posting your query on the Microsoft Community.
With the publication of the description, I understand that the card reader does not work on your machine, Windows 7 Pro. I will certainly help you get this fixed number.
I appreciate your efforts to resolve the issue.
Since you've already tried several troubleshooting steps for the fixed number. I wish to inform you that this problem can occur because of compatibility issues. I suggest you refer to the suggestions of Work Sam Varkey responded on December 28, 2009 in the below mentioned thread and check if this is useful:
Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.
-
Numeric keypad keys 7 and 8 letters type not giving way on Windows 7
Please help me... im going crazy... my key pad digital 7 and 8 type it wrong... instead of numbers 7, 8 types a few multiple letters not giving meaning... it's something wrong with the mapping or what would it be?... other keys of the numeric keypad work well... Thank you
Hello David,.
1. did you of recent changes to the computer?
2 have you tried to connect another keyboard (USB external keyboard) on this computer and check
If it works?I suggest you to follow the steps in troubleshooting mentioned in the link below and check if it helps.
Mouse, touchpad and keyboard with Windows problems
Hope this helps, please respond with the requested information and the status of the question to get help on Windows. -
my hp photosmart C4600 Printer series does not work via my bluetooth USB 2.0 Wireless printer adapter, I run windows 7
He ran once before, one of my suggestions of solution was the coil (?) was incorrectly, but don't know how to adjust it
Hello
(1) have you made changes before the start of this issue?
(2) what is the exact error message/code?
A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.
To change or restart the print spooler service
You must be logged on as administrator to perform these steps.a. click the Start button, Control Panel, click System and Maintenance and then click Administrative Tools.
b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
c. right-click on the print spooler service and then click Properties.
d. on the general tab, next to startup type, make sure that automatic is selected.
e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
Additional reference:
Open printer troubleshooter.Let us know if that helps. -
print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now
print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now
I have a printer HP psc 2510 series deskjet. Print many documents, it has notified me that I was low on ink which I was aware of. I had a little more what to print, and chose the young project option for printing of no more than 1 to 3 pages. I constantly tried to cancel the job that kept the origin of the printer show (not answer). It aligned to the top other jobs, but after trying to delete all, printer then turn on again, it still shows the original print job, and I'm unable to find a way out of Quebec
Verification of updates, there are only two listed as "optional" still thought by downloading them, it can solve the problem. It does not; He gave the error message on the print job in that causing a feeling of power.
I've never seen this before; I was always able to plug & play on my desktop printer and trying to use it on my Sony VAIO VGN-NW310F series.
It is imperative to get this resolved. School assignments are due and professorts not only does not want to hear the excuses of any kind, printing problems have always been easily resolved so far.
Please - I need immediate assistance. I already used the troubleshooter printer online which, as said earlier custody indicating the print job to Québec, is causing the printer to not answer. I cancelled each time, but it will not go away. I turned off the printer, reinstalled in the hope it would be empty, but it will not.
I appreciate your atttention guest on this subject. I work with Windows 7 Home Premium 64 bit operating system.
Thank you for your help.
Robyn Drake
E-mail address is removed from the privacy *.
Try in Services, locate the printer spooler, select it, and then stop the service.
Then check if you can delete the print job, if so restart the service
-
Hello, I recently bought a new iMac and I am wanting to install Lightroom for her, but I'm having some trouble with the key to series is not recognized. There is no disk drive on the new iMac, so I can't blow my disc. Is there a way I can download it simply by using the key to series on my package? I tried the section "Redeem Code", but said air key is not valid. Thank you
Download & install instructions https://forums.adobe.com/thread/2003339 can help
-includes a way to go to a page to download the Adobe programs if you do not have a disk or drive
-Cloud desktop http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
-Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
-you will need to enter your original serial number during the installation for non-Cloud programs
- or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216
Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq
-
Photoshop CS4 series is not accepted
Hello I own photoshop and it was installed on a PC. I uninstalled it to PC and now when I try to install on my new MAC my SERIES is not accepted. If anyone can help me would be nice...
THX...
Are you sure you used the serial number of the Mac drive rather than on the PC one? They must be different
-
Error message Acrobat Standard XI "this series is not an eligible product, please try another."
20/02/2014, I upgraded from Adobe Acrobat Standard version 9 of Adobe Acrobat Standard version 11. I changed computers and would like to have my update Adobe Acrobat Standard Version 11 switched to another computer. I was unable to disable Acrobat on the old computer to the customer (honey) support it off for me. I have now installed Acrobat Standard 11 on the other computer; but when I run the application acrobat Standard XI,
I get an error message "this series is not an eligible product, please try another." However, under "select a product", XI of Acrobat Standard is not listed. Can you please specify?
[Private information removed by the moderator - display of the serial numbers on a public forum is a violation of your license and result in deactivation]
Hey Jim,.
As it is a public forum, I recommend you to please remove the serial number of this post.
Now, talking about the error message you get, it simply means that you need to enter the serial number for Acrobat 9 you had previously installed - which is the product.
You could see this KB doc for a better understanding of the issue:
Error "this serial number is not for a product calling it" | CS6, CS5.5, CS5
Kind regards
Ana Maria
Maybe you are looking for
-
Reinstalled OS 10 El Capitan and how to get back old APPS?
Trouble with crashes so I reinstalled my operating system and want to retrieve my iWork and ilife apps. Have the installation cd but not the serial numbers. How can I get back them?
-
I'm looking for a replacement DC Jack for a HP 620 notebook. Can someone point me in the right direction?
-
Is it safe to leave the smart box on the 6s all the time?
Smart box still on the iPhone 6 s with 100% of the battery charge?
-
Trobleshooting in get updates of Windows XP
There is something wrong with my installer of Windows (XP Pro service pack 2 comp 2,600) and I can´t get automatic updates, even do it in the Windows Update page. I have can´t install larger programs such as Corel or Photoshop for the same reason. I
-
I t may be possible that a recent security update can have my Combat Flight Simulator install what is the safest procedure for updates to uninstall and reinstall Combat Flight Simulator 3 and updates again. E-mail address is removed from the privacy