serious discs will not play on the cd player or car drive?

Similar Questions

• Film on dvd Creator project. Plays fine in media player. Will not play in the dvd player.

  The project with photos and music. None of the effects or transitions. Project play 100% in movie maker after completion. Said created sucessful and raises questions to save on another cd. Plays correctly in computer with media player, but does not play in any dvd player.

  The project with photos and music. None of the effects or transitions. Project play 100% in movie maker after completion. Said created sucessful and raises questions to save on another cd. Plays correctly in computer with media player, but does not play in any dvd player.

  ========================================
  You have posted in a forum of WinXP, so I think that you are running
  WinXP?

  The project must be saved in a folder on your hard drive
  in the WMV or DV - AVI movie format and then on DVD
  using DVD Authoring software.

  To save in a .wmv movie file...
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To save a DV - AVI movie file...
  (and other options)
  Type of... CTRL + P (or go to...) File / save movie file)
  to open the wizard movie recording.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  Show more choices.
  Other parameters.
  Open the window of the droplet and choose... DV - AVI.
  Next /.
  Wait while the movie is saved.
  Finishing...

  In addition, you may find it useful to use
  a custom profile:

  Movie Maker 2 - economy
  Movies - profiles custom WMV
  http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.html

  Creating custom profiles
  for Windows Movie Maker 2
  http://www.Microsoft.com/windowsxp/using/MovieMaker/expert/CustomProfile.mspx

  Now to create the DVD...

  The following freeware can be worth a try:

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/Download.php
  (the download is: "dvdflick_setup_1.3.0.7.exe")

  Save the file to a folder on your hard drive and
  install from there.

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My photos that I burned to a disc will not play on our DVD player.

  I downloaded my photos from my camera to my computer using Windows Photo Gallery.  I have used an 52X700MB Memorex CD - R drive and burned pictures of her.  The disc will work on my computer but when I put it in the DVD player attached to our TV to see the pictures, it gives me this message-cannot read this disk.  I made the disc in the neck that worked well, but lately, I'm not having any luck to work.  Can someone help me please?  Thank you, Sheryl

  I don't know what you were doing in the past who would work on the normal DVD player.

  I know, if you want to burn image files or videos from computer to dvd dics and be able to play in any regular DVD player, you will need to do this with Windows DVD Maker.

  Excerpt:
  Windows DVD Maker is an application included in premium editions (Home Premium and Ultimate Windows Vista, and Windows 7 Home Premium) and editions that is designed to allow the creation ofDVD movies that can be played usingDVD reading or on a stand-alone consumerDVD player software.

  If you have Windows DVD Maker, here is the link to 'beginners guide for creating Windows DVD':
  http://www.windowsdvdmaker.com/guides/beginner/

  t-4-2

• disc CD - r will not play using a DVD player

  When I create a movie with movie maker cd - r disc will not play on a dvd player. It comes up with 'unknown disc '. Where I'm going wrong?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Unknown disk error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It is always better if you include your question in the body of your message.

  Unless you had a special software that would create a video CD (VCD) your
  free-standing DVD player won't play (and even then... your DVD
  Player must be compatible with VCD, and some are not)

  Try to use a cache of DVD with Windows DVD Maker. The following links may
  be worth a visit:

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  "Import files into Windows Movie Maker"
  "Publish and burn a movie to a DVD.
  http://m-Lov.blogspot.com/2007/11/you-can-use-Windows-Movie-Maker-to.html

  Windows Vista - Windows DVD Maker
  http://www.windowsvistauserguide.com/windows_dvd_maker.htm

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Burned DVD will not play on a DVD player

  I downloaded a 22 minute video I want to burn to a DVD in my DVD player.  I tried on the DVD-R and DVD + R.  They burn the disk but will not play on the DVD player.  The error message indicates that the reading is not available on this disc.  I used the windows search support to problem solve on my own, but have had no success.  I made sure that I am selecting the option of CD/DVD drive to use the ISO image format.  I entered my option and I have no filters.  I have the video on NTSC format since I'm Pennsylvania / U.S..  I have not tried burning on slow or average speed because it burns the DVD without problem it just will not playback on the DVD player.  What do you recommend as my next plan of action for troubleshooting.

  I guess that the video is not DVD compatible Mpeg2.  According to the DVD player, some will play other formats, too.  If there is no program for video on the computer, try Windows Movie Maker (free) to see if the video will too be converted to standard DVD Mpeg2.

• in windows movie maker, I made a film, but the disc will not play music, he worked before

  in windows movie maker, I made a film, but the disc will not play music of any other disk, in the past, I did what I do

  Hi Authorsz18,

  You are able to hear the music in the preview?

  Try to adjust the volume of an audio clip in the audio / music. And add music from the disc hard if you added songs to a DVD.
  1. right click on the audio clip > volume
  2 adjust the volume with the cursor.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-music-to-your-movie

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Qosmio F750 - 12 p / BD - RW Pioneer BDR-TD04A - Bluray discs will not play

  Qosmio F750 - 12 p
  BD - RW Pioneer BDR-TD04A
  Windows 7 Home Premium

  Problem: Bluray discs will not play. CD will play.

  History: I did a clean install of Windows 7 and then installed 60 all the drivers from the support site for this laptop model. Or at least those that would install. Interestingly, the driver of Toshiba Bluray would not install. the installation process stated "player not found on your system" or something like that.

  What works the device currently is a 2006 (?) Microsoft driver.

  Clues? It's the second Toshiba laptop, I had to (second-hand), and they both had this problem: DVD players do not play DVD right from the start. Very annoying.

  Update:

  The "Bluray driver" mentioned above is just the own DVD from Toshiba software. It is not a driver. And it does not find the optical drive Bluray on my laptop!

  - The Bluray optical drive will play DVDs, but not of Bluray discs. I'll borrow an another DVD Bluray at the local library, to ensure that it is not a disk failure.

  -The Wifi does not work ("network controller driver is bad / missing")

  - I probably deleted the hidden partition that contains the Toshiba "system recovery disk". I have re-installed Windows and written too. [You are supposed to press "0" when the power, but it does not show the Toshiba Recovery console. I scoured the hidden with a freeware Windows partition and there is nothing usable here.]

  It is a stupid economy, not providing a system restore disk AND do not provide drivers download work. (The drivers offered on the site are simply updated). It makes the laptop value much less long term and creates bad word-of-mouth over time.

  The only station I have is to buy a Blu - Ray external drive and perhaps a Wifi dongle. Crazy.

• USB sync will not play on the sync in car package

  I have CDs that I ripped to my playlists and then synchronized on a usb key.  Will play on the computer, but not in the vehicle.  What I am doing wrong that the USB sync will not play in the vehicle?

  CIA

  Hello

  1. have you ripped music files and synchronize directly on USB?

  2. What is the file format of the files that you ripped?

  3. are you able to play the songs in a different computer?

  This problem normally occurs when the radio does not support a specific file format. If you are able to play the songs to another computer, I you suggest to use third party software to convert .mp3 files and then check with the question.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope this information helps. Response with status so that we can help you.

• Why the clip will not play in the window of the observer?

  Hello world. It's me again. So, I just started working on a project, and the clip will not play in the window of the observer. In the timeline panel, I see that there are images to play, but the Viewer is black when I try to play. I have temporary can solve it by leaving FCPX and opening it again, but after a few minutes, the display window stops again, and it's a pain to have to do every time so I can watch a few minutes of film. Just so you guys know, do it mode multi-cam, incase that has an effect on it. Thank you very much!

  You have the options of display Angles show the value? You are in the editor of the Angle or the project timeline?

  Russ

• I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play.

  Windows XP DVD with Windows Media Player problem

  I have a Dell dimension3000 running Windows XP. I have an upgrade video card NVIDIA 8400 GS with memorey upgrade 2 g. I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play. Is there a better plug-in or a solution to this problem?

  Try to download the utility "Windows XP video decoder check utility.

  It checks the ability of DVD to WMP encoder

• Burning disc - disc does not play on any DVD player or a computer with the exception of my computer

  I have downloaded music and burned my computer on a DVD disc.  This disc can not play on any DVD player and computer but my computer.  I would like to read a disc in any CD or DVD drive.  Please tell me what I need to do.  Thank you!!!

  I recommend you burn a cd or a dvd with zune (microsoft Corporation) follow the instructions here to find out how to burn a cd or dvd to zune.

  If your song doesn't appear in your collection, I suggest buying your song with zune or Itunes

  ITunes costs about $ 1 per track and zune costs 14 dollars per 10 tracks.

  To learn more about the visit of zune music and reduced here.

  In Itunes, all you have to do is open itunes and click itunes store then the music and find the music you want.

  Download zune go here http://www.zune.net/en-us/products/software/download/default.htm

  To download Itunes, go here http://www.apple.com/itunes/download/

• DVD will not play on the standalone DVD player

  DVD NOT PLAYON STAND ALONE DVD PLAYER

  HELLO, I JUST USED WINDOW MAKER DVD, MY COMPUTER IS ONLY TWO MONTHS OLD.

  THE DVD WILL NOT PLAY ON MY DVD PLAYER WHICH IS PUGGED IN MY TV. HE PLAYS ON THE COMPUTER AND TELEVISION WHICH HAS A DVD BUILT IN IT.

  Thank you

  HELLO, I JUST USED WINDOW MAKER DVD, MY COMPUTER IS ONLY TWO MONTHS OLD.

  THE DVD WILL NOT PLAY ON MY DVD PLAYER WHICH IS PUGGED IN MY TV. HE PLAYS ON THE COMPUTER AND TELEVISION WHICH HAS A DVD BUILT IN IT.

  Thank you

  ==================================================
  If you use a DVD - RW disk... you could try a DVD-R, but some DVD players
  will not play a home made DVD... not much you can do about it.

  As an experience... you could try the following freeware to burn a video DVD
  recorded with your file to .wmv Movie Maker.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://sourceforge.NET/projects/dvdflick/

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• SWF file will not play on the Internet

  I've been everywhere on the internet, find the answer to my problem. I have a site in which I have two Flash animations that I need to play. We're working very well. I bought a model flash, edited, published, no problem. The other, I have a photo gallery template I customized, but it will not play on the internet, not even with the generated html file. Just a big black square appears. Here is a url to the nonworking time:
  
  www.atlantiswebandgraphics.com/ScottHambergArt.html
  
  This is the HTML generated by Flash 8. I noted that the publication of Flash 8 settings are set to 'Default' and the other Flash file that works is set to "Flash CS4 Settings." When I add that as a profile with a photo gallery, I get the error messages. I have screenshots of all the parameters in Flash, work and not work below files:
  
  www.atlantiswebandgraphics.com/images/WorkingPublishSettings.jpg
  www.atlantiswebandgraphics.com/images/NotWorkingPublishSettings.jpg
  www.atlantiswebandgraphics.com/images/NotWorkingPublishSettings1.jpg
  
  It's the working Flash file url: www.atlantiswebandgraphics.com/index2.html
  
  I could give much too much info, but I think better safe than sorry. And by the way, I'm really new to this (that's why I get models).
  
  Diane

  Thank you. I've decided to basically start from scratch on this model. It works now. As you say, must have been the unfinished function.

• FrostWire downloads of movies will not play in Windows Media Player

  I recently instaslled Frostwire but 9 times out of 10 when I download a movie it will not play with Windows Media Player. I always ask me to install all sorts of additional software. How to select the right files before losing hours of downloading stuff that I find myself deleting.

  Hello

  1. what exactly happen when you try to play the Windows media player?

  2. What is the exact error message you received?

  3. what file format you are using?

  I suggest you follow the link and check

  Play an audio or video file: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-an-audio-or-video-file-frequently-asked-questions

• DVD will not play on the computer.

  my computer crashed.  The computer files were all saved, but I can't find any programs.  For example, I can no longer play a dvd.  I have Windows Media Player, but it won't play the dvd from the library movie.  Also, when I go to computer/CDrom, the CDrom is empty.

  Thank you for your help.

  If it's a cd rom it will not play a dvd disc. Have you ever read a dvd on it? Is that what you did re - install Windows following the accident?