serious problem with the network card drivers

Ok. I've been messing around last night, playing GTA San Andreas on my laptop. I wanted to see what the resolution that I could run in, so I tinker with them a little more. I tried to apply a change and my laptop screen keeps flashing between 'off' black and black 'menu of the game' and I had to manually turn off because nothing has worked. When I rebooted, I found that I had no internet. This happens fairly regularly (my laptop is a bit grumpy and so it the wireless), so I don't think about it. But this morning, when I really need to search for a document, I found that I couldn't connect to the internet - or via my wireless ethernet cable. I think I'm done at the root of the problem, however: when I go to Device Manager, every single "network card" has a yellow exclamation mark next to it. If I double click on one, it says under device status as "this device does not work properly because Windows cannot load the drivers required for the device (code 31)." After seeing this, I was indirectly bothered to download/install the latest drivers for the two most important cards (Intel Pro / wireless 3945ABG and RTL9101 Realtek PCI-E). They said facilities were successful, but after a reboot, I always saw all connections and it has not responded to my ethernet cable.
If I right-click on one of the cards and choose "update the driver software", then select the new drivers manually, it starts to install it and then says "windows has detected software driver for your device but encountered an error...". This device does not work properly because windows cannot load the drivers required for this device (code 31).

I don't really know where to go from here (I'll try to update BIOS driver, but I'm skeptical that it will help), and any help at all would be much appreciated. I called HP and they said my warranty was up and wanted me to pay for their "advice".

The laptop is a HP Pavilion dv6920us.

Thank you very much!

Hello

What system do you currently use?

Tags: Notebooks

Similar Questions

  • When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

    When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

    Hello

    Thank you for writing to Microsoft Communities.

    Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

    1. What is the full error message do you get?

    2. are - that you be able to access or connect to the Internet via wired?

    3 have there been recent changes to the computer before the show?

    Please go ahead and follow the steps mentioned and later a update on the State of the question.

    Method 1:
    Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
    http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

    Method 2: If the problem persists, try to follow the steps from the link.

    In the Windows wireless network connection problems:
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Check this link for more information:

    How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

    Why can't I connect to the Internet?
    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

    Please follow these recommended steps and post if you still experience the problem.

  • HP laptop i3 1000 product number: C8C94PA #UUF problem with the graphics card drivers.

    I initially was running Windows 7 Home basic 64-bit on my laptop. The version of the graphics card is Intel HD 3000, I think. Following the crash of my windows, I installed Windows 7 Enterprise 64-bit. Now when I open the HP Support Assistant, it's my graphics card adapter Standard VGA Graphics Adapter. Furthermore, none of my games begin.  When I try to install the original graphics driver for my laptop, available on the internet, he said that my phone does not meet the requirements for the installation. All solutions?

    Yes.

  • Problem with the graphics card drivers

    Hello

    My laptop is running the radeon hd 6470 m and I installed the driver HP offers on this Web site (this is the version 8.882.2.0). Now this driver works fine, except when I try to play some games. I love playing the game League of Legends, and with this driver installed this game does not work correctly, so I tried and return the driver back to the one that came with it when I first got this laptop (this is the version 8.830.6.3000). Now the strange thing is that with this driver installed I can play League of Legends, but other games and some programs do not work correctly on this driver, I guess because it is an older driver. Now I want to basically just installed a driver that can run both.

    I'm not sure this is the right forum to post this problem, but it is the first that I try

    My laptop:

    HP Pavilion 1270sd g7

    It's switchable graphics with Radeon hd 6470 m and Intel graphics.

    With sincere friendships.

    Sjoerd

    Just noticed that this driver is for windows 8, I m running windows 7 64 bit

  • Problem with the network connection Wireless since installation of win 7.

    I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
    And the funny part is that when it detects one network different, other than mine, it connects and works very well!

    I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

    What to do?

    Hi KlinzmannFussballspielerin,

    Welcome to the Microsoft Answers community.

    Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

    I suggest you to update the network drivers.

    Steps to update of network driver:

    1. click on the Start button.

    2. in the search box type devmgmt.msc, and then press ENTER.

    3. Select the network device and right click on it

    4. now, select Properties.

    5. in the Properties window, on the driver tab, click Update driver.

    6. After installing the updates, restart the computer.

    For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

    To solve your problem, try to turn on network discovery. To do this follow the steps below:

    1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

    2. click on the chevron to expand the current network profile.

    3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    To learn more about this feature, please visit the below mentioned link:

    http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

    If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

    To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

    http://support.Microsoft.com/kb/299357

    Disable the IP helpdesk:

    1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

    2. scroll down to the IP assistance service, right-click on it and select Properties

    3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

    4. then click on "Stop" to stop the service from running in the current session

    5. click on OK to exit the dialog box

    Disable IPv6:

    Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

    NOTE: You should do this for each network connection.

    Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    (How to back up and restore the registry in Windows)

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

    To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

    1. Click Start, type regedit in the search box, and then click regedit in the list programs.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    2. Locate and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

    3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

    4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

    5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

    6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

    7. in the value data box, type 1 and then click OK.

    8. close the registry editor.

    By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

    Hope this information is useful.

    Let me know if it worked.

    Thank you, and in what concerns:

    Umesh P - Microsoft Support

    Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

  • Error code 797: connection is not available because there is a problem with your network card or modem

    I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

    Hi Muffakham,

    Thanks for posting your question in the Microsoft Community forums.

    I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

    I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

    To provide the proper resolution, that I would need more information on your side.
    Did you the latest changes on the computer before this problem?

    This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

    Method 1:
    I suggest you try the procedure described in the article and see if it helps.

    How can I troubleshoot network card?
    Method 2:
    If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

    Windows wireless and wired network connection problems
    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Check out the link for more information.

    Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.
  • Firefox and serious problems with the police on the websites bloglike.

    Firefox on my computer has some serious problems with the police on some sites, such as: twitter, tumblr and a few other bloglike.

    Images:
    Twetter / thumblr / other

    Yes, it is more likely a hardware acceleration problem or a problem with the specific fonts (rendering).

    You can do a test of fonts to see if you can identify the corrupted fonts.

    You can use this extension to see what fonts are used for the selected text.

  • Problem with the video card Inspiron 7520

    Hi all


    Since I installed the 8.1 update windows I have problems with the video card. PC 2 video cards are installed:

    (1) AMD Radeon HD M 7730
    (2) Intel(r) HD Graphics 4000

    The main problem is that the resolution of the screen is fuzzy. I downloaded from Dell, the updates for both cards and tried to install, but it does not change Sub. My question is: is there a special procedure to install a driver?

    Thanks to you all!

    HELPPPPPPP!

  • My purchase is that creative cloud is a ° 16034007400 at the date of renewal, there was problems with the credit card, but the tax has been paid in January. So far I can't use the program or any of its components without Adobe me any explanation on why I

    My the purchase is Creative Cloud is a ° 16034007400 at the date of renewal there are problems with the credit card, but the deposit was paid to January. Up to now I can not use the program or one of its components without Adobe me any explanation on why I can not use.
    Why not allow Use Adobe Creative Cloud?

    : Contact support from adobe for hourly pst by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • My customer is having a serious problem with the Contact form Widget

    My Client is to have a serious problem with the Contact form Widget that I can't seem to figure out how to fix.

    I created a website for a client and inserted a widget of Contact form on the "Contact us" page Whenever someone uses the form, e-mail receive my client shows my e-mail address as the sender. So when they "meet" the email, the response is sent to me and not the person who sent the original message. This creates a major problem in that I get flooded with answers e-mail while my client's potential customers go without a response.

    When I look at ' Site Manager > email system > Workflow information > e-mail address on the site administration Console, it displays my e-mail information. This is what needs to be changed?  If this is the case, what needs to be placed in this field for the email address of my client receives presents information email senders in the field "from".  My client wants to be able to click on reply and the message sent to the right side. They would be very angry if should be cut and past shippers Correo electronico of the body text on all the contacts they receive.

    Their feeling is that if I can't find a way to make the contact form works as it should, then there is no need for them.

    Can someone help me understand this? I really don't want to disappoint my first client.

    Congratulations for your first customer! =>

    Looks like you can have your email in places where your customers email should be.

    Here are the places you need to change your e-mail address.

    First adjust the answering of your web form is your customer email. Screenshot: http://screencast.com/t/YWiZZ30E0jE and http://screencast.com/t/u4t69anTLR

    Second set Emails to come your clients e-mail system. Site management > system email > set default "from" e-mail. Screenshot: http://screencast.com/t/EAr2sfXk

    I always go through each email system and check the e-mail address after you set the default value. I found that it doesn't always change them for some reason any. Note: If you are on a lower to webCommerce plan your list can be shorter than what is shown.

    Make sure that the email you the list of customers is also an email they want in public.

    Also provide information on the TSA that thetrickster888 is good information.

    I hope this helps.

    Lynda

  • Satellite C850 - found problems with the networking and the FN key

    Hey everybody,

    I work on a Satellite Toshiba C850, that my parents recently bought and spin in a certain number of questions.

    (1) wireless won't connect to my network. Have done the following: verified by connecting on two other computers, reset the router, the open network, reset the map, reinstalled the realtek drivers, checked the settings in the networking of Toshiba Utilities. End result is he's going to try, and fail. Wired LAN works fine.

    (2) FN key does not work. Have you checked the region and it is OK, have tried to use the Flash cards - no change, checked with the screen keyboard and can check the FN key does not register.

    I noticed that the first problem is common, but there are obvious positive results. If anyone can offer any assistance, I would appreciate it a lot.

    Before you begin to discuss your problems can you please tell us what OS you are using?
    Are you using the original OS that you got with your laptop? I mean original recovery image has been tested and works correctly, with the factory settings that all should especially the FN keys.

    1 / What do you mean with refusing? your WLAN is visible for your laptop?

    2 / if there is problem with the feature keys FN and you use Win7 try please reinstall extra package from Toshiba.

  • Problems with the video card and sound card on Toshiba model #PSLCOU - 02701G

    I bought a new laptop in 2009, and it is a Toshiba, model #PSLCOU - 02701G. After about three months the video card and the sound began to spoil. It's what he does, I can go on U-tube or any web site that has a video to watch like CNN news, etc. What it does is it starts to play and the video and the sound is good and he paused for a few seconds and starts again, new breaks and pauses, starts, pauses, starts. He does it all the time, and I was wondering if you all have any idea whats going on? Help? Help?

    It really sucks when you try to watch the news. Also, I put a CD or DVD into the laptop and it works perfectly. I can watch any DVD or listen to a GREAT Cd.

    How is your network connection?  Sometimes, the system needs to create a cache to store the downloaded information and if the download is not pass quickly enough the system will freeze while wiaiting for download to catch up - not a problem with your sound cards and video, but with the speed of Connection on the website or on the network itself (or your network equipment).  This looks like the case if the DVD and the CD's works fine.  Check your internet connection and try to download the video pages to see if the problem is with all the downloads, or only those on a site.  You can contact your ISP and have them help check you connection and settings and the modem for problems or changes, you can do to improve things. Sometimes happens to me as well in the internet connection runs slower than normal and there is nothing that I can do but wait to accelerate - and it's frustrating.

    You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need you to do all you have time to do, but at least the network card, sound card and video card - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • iPad2 and problem with the SIM card after update

    even after the 9.3.1 last updated continuously having problems with SIM TIM card network.

    I changed and I tried with another SIM card but the problem remains.

    I did have all those problems with 9.2.1.

    Apple could intervene and solve these problems? Otherwise, I think it's better to make a return to the old 9.2.1.

    Thank you

    Do you see the network? and is it strong enough?

  • Problems with the graphics card on Satellite Pro M10

    Hi, this is my first post on the forum. I'm not a pro with computers or anything... the problem I have with my laptop is similar to the one in this thread:

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26849&TSTART=0

    I spent half the day trying to figure out if my graphics card is broken, but since I'm a newbie with this stuff, I'm still not sure. :(

    This is what makes my M10. I'm trying to describe the symptoms that detailed as possible, but I'm German, so please excuse my lack of words in some places.

    1. when I turn it on, the laptop goes through the BIOS and give me scrambled BACK-screens and a slightly Warped windows loading bar. There is the consistency check, marked by black bars connecting the top of the screen down. After the audit, the screen goes black and nothing happens, or the screen of will just show me consistency check, do nothing. Be that as it may, I have to turn off the power (I think) and restart the laptop.

    2. sometimes the laptop goes through the BIOS checking & conistency with a few graphical shortcomings. The office is anything but shredded when he gets to the screen of the Windows user. The static method is if serious I don't even know where is the button turn off.

    3. sometimes Notepad starts very well, with the only graphic problem being the windows loading bar. When I go into Windows, the laptop pulls me a blue screen and stops immediately.

    4. sometimes, the laptop works fine for about an hour or two. After I rebooted, I have the same problems listed above, once again.

    5. If I open Device Manager and disable the graphics card, the laptop works very well. I have to lower the screen resolution and colors, but I can watch videos on youtube and everything. Finally, the laptop gets very hot on the bottom and the screen goes crazy again, so I turn the damn thing off.

    I don't know what that means! If my graphics card is broken, the screen should be all static, ALL the time? Not just sometimes more,... could sometimes less be some sort of communication problem between the graphics card and cpu? Please help me with this!

    Another thing I'm not sure about, even after reading the thread I linked above - can I replace the graphics card or not? Everyone said something different in the other thread...

    see you soon,
    Cozmo

    Edit: maybe I will add when I got the screen scrambled and everything. I installed Civilization 4, just to check if my satellite pro can handle, and everything went well for a while. The screen then haywire and I rebuilt my whole system, but display problems did not disappear completely. They were gone for almost a month, and now they are 'back' or something.

    Hi Cozmo

    I'm not a technician but here nobody needs technical knowledge to see that there certainly is hardware problem. I also believe that this problem occurs due to the graphics card. Graphics card is part of the motherboard and it cannot be traded separately. The entire motherboard must be exchanged.

    In my opinion, you have two options: either contact the authorized service provider in your country and speak with them, what can be done, or try to get the motherboard used. If you are lucky, you can find it on eBay. I already bought several hardware components for my old Satellite P10 on eBay.

    Sorry Cozmo but I do not see any other logical solution for you.

    Good luck!

  • Problem with the network connection security

    When I try to view certain websites, I get an error message that says: "there is a problem with the security of your connection Metwork. In addition, a friend just sent me a copy of an e-mail that was sent to him. Apparently, someone must have hacked into my email account, has obtained my contact list, created an e-mail account using my name and sent e-mails to people on my contact list.

    How can I fix the problem with the warranty of my network connection, and what I can do on the pirate e-mail contacts list?

    Can you give an example of the websites that you see this 'error' on?

Maybe you are looking for

  • A website no longer works correctly. O ' k with IE. Recent updates FF18, Flash 11.5.502.146 & Win 7 (64-bit)

    www.Dallastown.NET website of the school is no longer loading the images/info correctly. Works well with IE. To maneuver around some by right click and open in a new tab. "Select a school" menu drop-down is a specific problem. Times many clicks of th

  • HP Pavilion dv5-2135dx: get active bluetooth / work?

    I operate bluetooth. but it seems that I hit dead ends and nothing done yet to get bluetooth working on windows 64-bit 10. I tried the two drivers of bluetooth of the page of the official product of the hp driver "sp50180" & "sp52533". driver page -

  • Placement of iPs for FW double

    Hi all We have basic set up: 2 Core SW (6513 - channeled port)--> ASA 2 (active / standby: running OSPF). ASAs DMZ--> 2 DMZ switches (2948 & 3560 channeled port). Same core switches,--> second pair ASA via different vlan that the first pair (runs as

  • RE: Lr 5.7

    When Lr 5.7 support GX85 of Lumix RAW files?

  • Retrieve the names of files for Linux?

    HelloI installed ODI 11 g on windows. and load the multiple file. as you can see that this procedure (script) is used to get the name of the files. using technology "Operating System"cmd /c dir D:\test\*.*/b /a:-d > D:\\Filesname.txt. It works well o