Server 2008 r2 domain through IP locations & Internet Connectivity when domain server (internet down instead)

Similar Questions

• I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an Internet service provider

  Hello

  I have an internal modem on my pc that is running windows server 2008, and I want to make a connection. Not a connection to an ISP, but to a mac. I want to transfer data via phone ports, have two computers without being connected to the outside world.

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I migrate my profile of Terminal servers from a domain controller to a 2008 R2 domain controller 2003?

  I have a 2003 DC and I install a 2008 R2 to be the new domain controller. I want to migrate the users of Services Terminal Server profile for the new 2008 R2 domain controller?

  Example:

  Services Terminal Server profile:

  Terminal Server user profile:

  Path profile = \\2003DC\profilests\username

  The Terminal Services home folder:

  Connect: H

  To: \\2003DC\home\usermane

  I would like to migrate these files to the 2008 R2 domain controller so I can turn off the domain controller 2003.

  Example:

  Services Terminal Server profile:

  Terminal Server user profile:

  Path profile = \\2008DC\profilests\username

  The Terminal Services home folder:

  Connect: H

  To: \\2008DC\home\usermane

  Hello

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for RDP

  I had a windows 2008 r2 domain 1 DC everything worked fine, I added a second windows of DC 2012 now Kerberos does not work for the RDP, Hyper V replication is nothing below a couple of samples of what I see I do not know where to begin finding the problem

  + System

  -Supplier

  [Name]  Microsoft-Windows-Security-Kerberos
  [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
  [EventSourceName]  Kerberos
   
  -EventID 3

  [Qualification] 32768
   
  Version 0
   
  Level 2
   
  Task 0
   
  Opcode 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2016-01 - 03 T 01: 34:27.000000000Z
   
  2991 EventRecordID
   
  Correlation
   
  -Execution

  [ProcessID] 0
  [ThreadID] 0
   
  Channel system
   
  Computer DC02.xxxxxxonline.com
   
  Security

  -EventData

  LogonSession xxxxxxONLINE.COM\xxxxxx
  ClientTime
  1:34:27.0000 03/01/2016 Z ServerTime
  Error code 0 x 19
  ErrorMessage KDC_ERR_PREAUTH_REQUIRED
  ExtendedError
  ClientRealm
  CustomerName
  ServerRealm xxxxxxONLINE.COM
  ServerName krbtgt/xxxxxxONLINE.COM
  TargetName krbtgt / * address email is removed from the privacy *
  ErrorText
  E file
  Line d3f
  30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

  --------------------------------------------------------------------------------

  Binary data:

  In the words

  0000: 54307730 010203A 1 044DA213 3049304B
  0008: 0203A01F 18A 11201 4F52161B 59454B 43
  0010: 494C4E4F 432E454E 6F724D4F 79656B 63
  0018: 03A 00530 30170102 0203A01F 18A 10301
  0020: 4F52161B 59454B 43 494C4E4F 432E454E
  0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
  0030: 30000402 0203 HAS 109 02A 21001 09300004
  0038: 010203 A 1 0402A20F 00

  In bytes

  0000: 30 77 30 54 A1 03 02 01 0w0T¡...
  0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
  0010: A0 03 02 01 12 A1 18 1F. ....¡.
  0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0030:30 05 A0 03 02 01 17 30 0. .... 0
  0038: A0 03 02 01 03 A1 18 1F. ....¡.
  0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0058:30 09 03 02 01 02 A2 A1 0... ¡¢
  0060: 02 04 09 03 02 A1 00 30... 0.¡..
  0068:01 A2 02 04 00 30 09 10... ¢... 0.
  0070: A1 03 02 01 0F A2 02 04... ¢...
  0078: 00                        .

  + System

  -Supplier

  [Name]  Microsoft-Windows-Security-Kerberos
  [Guid]  {98E6CFCB-EE0A-41E0-A57B-622D4E1B30B1}
  [EventSourceName]  Kerberos
   
  -EventID 3

  [Qualification] 32768
   
  Version 0
   
  Level 2
   
  Task 0
   
  Opcode 0
   
  Keywords 0 x 80000000000000
   
  -TimeCreated

  [SystemTime] 2016-01 - 02 T 16: 52:38.000000000Z
   
  2943 EventRecordID
   
  Correlation
   
  -Execution

  [ProcessID] 0
  [ThreadID] 0
   
  Channel system
   
  Computer DC02.xxxxxxonline.com
   
  Security

  -EventData

  LogonSession xxxxxxONLINE.COM\xxxxxx
  ClientTime
  16:52:38.0000 02/01/2016 Z ServerTime

  
  Error code 0 x 19
  ErrorMessage KDC_ERR_PREAUTH_REQUIRED
  ExtendedError
  ClientRealm
  CustomerName
  ServerRealm xxxxxxONLINE.COM
  ServerName krbtgt/xxxxxxONLINE.COM
  TargetName krbtgt / * address email is removed from the privacy *
  ErrorText
  E file
  Line d3f
  30773054A103020113A24D044B3049301FA003020112A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793005A003020117301FA003020103A1181B16524F434B45594F4E4C494E452E434F4D726F636B65793009A103020102A20204003009A103020110A20204003009A10302010FA2020400

  --------------------------------------------------------------------------------

  Binary data:

  In the words

  0000: 54307730 010203A 1 044DA213 3049304B
  0008: 0203A01F 18A 11201 4F52161B 59454B 43
  0010: 494C4E4F 432E454E 6F724D4F 79656B 63
  0018: 03A 00530 30170102 0203A01F 18A 10301
  0020: 4F52161B 59454B 43 494C4E4F 432E454E
  0028: 6F724D4F 79656B 63 03 HAS 10930 A2020102
  0030: 30000402 0203 HAS 109 02A 21001 09300004
  0038: 010203 A 1 0402A20F 00

  In bytes

  0000: 30 77 30 54 A1 03 02 01 0w0T¡...
  0008: 13 4 04 4 B 30 49 30 A2. ¢ M.K0I0
  0010: A0 03 02 01 12 A1 18 1F. ....¡.
  0018: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0020: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0028: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0030:30 05 A0 03 02 01 17 30 0. .... 0
  0038: A0 03 02 01 03 A1 18 1F. ....¡.
  0040: 1 16 52 4F 43 4 B 45 59 B... XXXXXX
  0048: 4F 4 49 4F 4E 45 2ND 43 ONLINE. C
  0050: 4 72 6F 63 6 b 65 79 OMxxxxxx 4F
  0058:30 09 03 02 01 02 A2 A1 0... ¡¢
  0060: 02 04 09 03 02 A1 00 30... 0.¡..
  0068:01 A2 02 04 00 30 09 10... ¢... 0.
  0070: A1 03 02 01 0F A2 02 04... ¢...
  0078: 00                        .

  This issue is beyond the scope of this site which is for the consumer to related issues.

  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer

  http://social.technet.Microsoft.com/forums/en-us/homes/en-us/home

  http://social.msdn.Microsoft.com/Forum

• Manager CTS & 2008 R2 domain controller?

  Hello

  Documentation Manager 1.6 CTS indicates clearly that 2008 R2 as a domain controller is not supported, but what about the CTS Manager 1.7? I tried to find this information, documentation, but has not found statement clear on the supported or not supported.

  / Mikko

  Hi Mikko,

  Support for Windows 2008 R2 domain controller is currently roadmapped for next version 1.x - currently planned for 1.8.  1.7 it has not been officially tested, so it is not officially supported.

  As you have indicated, Cisco noted in the Administrator's guide for 1.6 it is not supported. Documented were errors when running the prequalifcation tool as well as noting the support of Microsoft matrix which also has its own requirements for Exchange version compatabilities:

  http://TechNet.Microsoft.com/en-us/library/ff728623.aspx

  -Paula

• PIA - the application server is down

  Hello
  
  Get the error:
  
  The application server is down at the moment. CHECK THE LOGS OF APPSERVER. THE SITE STARTED WITH THE INTERNAL DEFAULT SETTINGS...
  
  I checked the positions which have been previously by our users, but have had no luck!
  
  8,53 PT with ELM 9.1 - wins 2008, sql 2008, everything runs on a single server.
  
  AppServer is in place and I can connect via the application designer. No errors in the log, even no error when I run startPIA.cmd
  
  the site URL is http://oracleELM/psp/ps etc. no not required in the URL port number
  
  .Properties configuration has the following entry
  
  psserver = OracleELM:9000
  
  There is no entry assperver, is this correct?
  
  Settings for the domain
  WSL port: 7000
  JSL Port: 9000
  
  Thanks for your help!

  One more thing that may be incorrect is the password for the PTWEBSERVER in the configuration.properties file.

  During the installation of the database that you need to provide the password for PTWEBSERVER.

  During the installation of the PIA, you also had to provide the PTWEBSERVER user and the password.

  These two must match.

• The application server is down at the moment

  Hello
  We are at 8.49 on Win 2003.
  Application server is in PLACE:
  

  Prog Name Queue Name Grp Name ID RqDone Load Done Current Service
  ---------      ----------  --------      -- ------ --------- ---------------
  BBL.exe        58296       AS15DEV3       0    102      5100 (  IDLE )
  PSMONITORSRV.e MONITOR     MONITOR        1      0         0 (  IDLE )
  PSANALYTICSRV. 00080.00001 ANALYTI+       1      0         0 (  IDLE )
  PSAPPSRV.exe   APPQ        APPSRV         1      0         0 (  IDLE )
  PSWATCHSRV.exe WATCH       WATCH          1      0         0 (  IDLE )
  PSANALYTICSRV. 00080.00002 ANALYTI+       2      0         0 (  IDLE )
  PSAPPSRV.exe   APPQ        APPSRV         2      0         0 (  IDLE )
  PSANALYTICSRV. 00080.00003 ANALYTI+       3      0         0 (  IDLE )
  PSAPPSRV.exe   APPQ        APPSRV         3      0         0 (  IDLE )
  JREPSVR.exe    00094.00250 JREPGRP      250      0         0 (  IDLE )
  JSL.exe        00095.00200 JSLGRP       200      0         0 (  IDLE )
  PSSAMSRV.exe   SAMQ        APPSRV       100      0         0 (  IDLE )

  But when the connection in Internet Explorer, it is stated:
  
  The application server is down at the moment.
  
  Configuration.properties, I have the IP address and correct port number:
  
  psserver = 182.16.0.X 9:9040
  
  What should I check?
  
  Thank you very much.

  9040 is the port of jerk to the right field that you want to work? Is it the AppServer on the same server as your Web server box?
  It could help verify AppServer logfiles (% PS_HOME%/domain) stderr and stdout LOGS/APPSRV_XXXX. Log in addition to Web server log.

  Nicolas.

• My iphone5 let me download ios 9.3 do not check say I have no internet connection when I have a full service

  My iphone5 let me download ios 9.3 it does not check say I have no internet connection when I have a full service

  version9.2.1

  Many users have encountered problems to update their devices, their activation or signing into their account after updating iOS 9.3. Apple is aware of the problem and working on a fix.

  Take a look at these articles for additional information on the issue or adapt:

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3If you cannot activate your iPad 2 (GSM model) updated to iOS 9.3

  Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more

• Second laptop unable to connect; When trying to connect wirelessly, says connection is successful, but the Public unidentified network, no Internet.

  Hi all.

  I'm really sorry to post this question, I must have read 100 other threads on this topic, but none of the solutions seem to work for me.

  I have a home set wireless network in place, which may not have a lot of problems with it that I have a laptop W7 which has a perfect wireless connection, and also our TV connect when you want, as do our phones and Xbox.

  We bought a second hand Acer aspire laptop for our daughter. It is running Vista Edition family Basic. Even if she had the factory reset done on this, because we can connect to the router with an ethernet cable and it works very well, we managed to ensure that all updates of Windows etc are all complete.

  When trying to connect wirelessly, it says connection successful, but it is to a Public unidentified network, and there is no Internet. Also, even if it says Local access, we cannot connect to the router settings page is.

  I have uninstalled and reinstalled the built-in wireless adapter and updated the driver to do this, he says that he is as up-to-date as possible.

  I checked that DHCP is enabled, we tried dynamic and static IP addresses, we have disabled and re ipv6 enabled, we used the command prompt to reset winsock and stack ip, I looked into msconfig services for service # Id_String1.6844f930_1628_4223_b5cc_5bb94b879762 # Apple off but it isn't here.

  I have a real dislike for Norton / products McAfee and there is none of these on the laptop. We will install Comodo Internet Security, Eusing Registry Cleaner, Spybot S & D and Spyware Blaster as soon as the wireless is configured and that the Windows Firewall is disabled.

  We also have many turns of the spin off the coast and laptops, etc. and deactivation and activation of the adapter.

  It seems that all the usual solutions for the lack of connection are not the culprits this time.

  IPconfig for W7 laptop that works well is:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation. All rights reserved.

  C:\Users\Adrian>ipconfig/all

  Windows IP configuration

  Name of the host...: Adrian-laptop
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless Network Connection 2 wireless LAN adapter:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Virtual WiFi Miniport adapt
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Broadcom 4313 802.11b/g/n
  Physical address.... : 78-E4-00-D1-5F-6A
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::30fd:c01f:ab28:fbf9% 13 (Preferred)
  IPv4 address: 192.168.1.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: 13 August 2012 09:16:54
  End of the lease...: August 14, 2012 09:56:23
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 360244224
  DHCPv6 DUID customer...: 00-01-00-01-13-B2-5C-FD-90-FB-A6-A5-8F-73

  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Tunnel adapter isatap. {09285A7E-7837-4D7B-994D-C70130D43958}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card adapt 6TO4 tunnel:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 15:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:5ef5:73 b 8: 8ed:720:a3fa:1e53 (Prefer
  Red)
  Address IPv6 local link...: fe80::8ed:720:a3fa:1e53% 24 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Reusable Microsoft 6To4 tunnel map:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 11:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  IPconfig for the Vista laptop that works wired but not when it's wireless is:

  Microsoft Windows [Version 6.0.6000]
  Copyright (c) 2006 Microsoft Corporation. All rights reserved.

  C:\Users\Adin>ipconfig/all

  Windows IP configuration

  Name of the host...: Georges-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. :
  ... Description: Atheros AR5007EG Wireless Network adapt

  Physical address.... : 00-1D-D9-1B-71-69
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::78c1:cedd:291c:e44b % 11 (Preferred)
  IPv4 address: 192.168.1.2 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: August 13, 2012 11:28:16
  End of the lease...: August 14, 2012 11:28:16
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DHCPv6 IOOKING...: 151002585
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) fast Ethernet
  Physical address.... : 00-1B-38-5C-28-24
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 6:

  The connection-specific DNS suffix. :
  ... Description: isatap. {E409704E-A039 - 41A 8 - BEB9 - 614B6A018}
  493}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.1.2%12(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.1.1.
  192.168.1.1
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 7:

  The connection-specific DNS suffix. :
  ... Description: isatap. {CC1DD067-8D6C-4BDE-BCC8 - 13921 941
  532}
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  ... Default gateway. :
  NetBIOS over TCP/IP...: disabled

  Card tunnel Local Area Connection * 9:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 02-00-54-55-4E-01
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Any help or advice will be most appreciated thanks

  Norton or McAfee pre-mstalled of recovery of the manufacturer media?

  If so, did you uninstall it AND run the tool to remove the appropriate product manufacturer?

  Download the Norton removal by https://www-secure.symantec.com/norton-support/jsp/help-solutions.jsp?lg=english&ct=united+states&docid=20080710133834EN&product=home&version=1&pvid=f-home

  Close all other programs, and then run the tool. When it is complete, reboot the machine if she wants it or not.

  Download the removal of McAfee Development tool from:

  http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  Click on save and save the file to a folder on your computer.

  Navigate to the folder where you saved the file.

  Right-click MCPR.exe and select "Run as Administrator" to run the removal tool.

  When you're finished, restart.

• network connection 2 without wire - says I have no internet connection when I do

  It is said my 2 wireless network connection not connected and I have no idea what to do, programs such as firefox, spotify and limewire etc. say that I have no internet connection when I do, anyone who could help me with this I would be eternally greatfull as it is originally a certain problems Thank you.

  Go to start / connect to / and select 2 wireless network connection and click on connect.  Enter the name and password if necessary.  It must now be connected (if it is properly configured and configuration correcctly) and you should have access through programs that use this connection.  If the connection is not listed, then it is not setup correctly.

  If you use Vista, here are some tips that might help you.  If another operating system, please post on the networking of the XP Forumshttp://social.answers.microsoft.com/Forums/en-US/category/windowsxp Forum or the Forums of Windows7 http://social.answers.microsoft.com/Forums/en-US/category/windows7 for assistance,

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  You must set up a wireless internet connection in the network as well as the connection sharing normal LAN wireless and connect to it as well as the local connection.  If you don't do this, you will not have an internet connection.  You need both.  You must also enable some features in the main area sharing network to access the internet - they are quite well defined.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How do you get alerts if your mail server goes down?

  I have send and text alerts sent via my server Exchange but is it built to send alerts in case our email server goes down? Foglight has a mechanism to send alerts that do not require a mail server?

  Hello

  Yes... Make sure that the failover on monitoring of Server SMTP is selected in the Config > Admin > SMTP settings area. This will continue to route alerts through our mail server, in which case your crashes.

  Thank you

• http using aaa authentication when Ganymede server is down

  I installed AAA using Ganymede and everything works well except for authentication http through a browser or a network Assistant when the RADIUS server is down. For console and telnet connections, the default authentication line when Ganymede is out of service.

  AAA new-model

  AAA authentication login default group Ganymede + line

  AAA authorization exec default group Ganymede + authenticated if

  AAA accounting update newinfo

  AAA accounting exec default start-stop Ganymede group.

  only AAA 0 default stop accounting controls group Ganymede +.

  only AAA 1 default stop accounting controls group Ganymede +.

  accounting AAA commands default 15 stop only Ganymede group.

  !

  aaa IP http authentication

  !

  radius-server host 10.161.161.20

  111111 radius-server key

  It must be something with the fact that on http or ANC, it connects to the router at level 15, but I have played with all sorts of orders of different authorization and cannot operate.

  Paul

  What you want to do for authentication if the RADIUS server is down? For telnet and console access you can use the line as a backup method because it is possible to configure a password for the line on the console and vty ports. Which type of backup method you want for HTTP? The one that seems most logical to me would be to a local authentication in order to cover the situation where the server is down.

  To use local authentication, you must do the following:

  -create a definition of the local user (maybe more if you need extended security).

  -specify a special method for authentication of the aaa.

  -specify that http, using the special method.

  The configuration might look like this:

  password user tech1 tech1

  AAA authentication login http_auth group Ganymede + local

  IP http authentication aaa - authentication of the connection http_auth

  Or you can decide to use the secret to activate (or password that is configured in office). The config might look like this:

  AAA authentication login http_auth group Ganymede + activate

  IP http authentication aaa - authentication of the connection http_auth

  If you want a different backup method, let us know what it is and we'll see how it could be implemented.

  HTH

  Rick

• If the server is down

  Hello.
  I m developing a game.

  There many variables URLLoaders thereon.

  I m adding an IOErrorEvent listener for each of them.

  I´d I just wanted to know:

  For example, if I-m the game, then

  I ask (I call a Flash php file that will send or get information from a database).

  What happens if the server is down right now?

  What is going on?

  Flash triggers an IOErrorEvent?

  Thank you

  @Lee: ' why not try to use a url that does not exist and see what happens...» »

  There are major differences between the nonexistent files on the server/domain valid and not valid domains - non-existent servers.

  @marcelozepgames:

  In both cases, IO_ERROR will return error #2032 error of flow. However, if monitor you HTTP_STATUS - you will notice the difference in status. Most likely, if the server is down (or not valid server) - status will be 0. In the case of the invalid url on the valid server - it will be 404.

  In any case-, it is not difficult to check it out on your own server local tilt head on a stop.

• I can't scroll through sites that I connect. something happened in mozilla firefox. It allows to work when I am connected to a Web page, but not now. all I can do is

  I can't scroll through sites that I connect. something happened in Firefox Mozilla. He used to work when I am connected to a Web page, but not now. all I can do is to manipulate the page through links on the page. No sidebar to scroll or the other. It works fine in Explorer, so I know it's a problem with Firefox, also can scroll etc on pages like MSN, Yahoo, etc., but does not not using Firefox, when I connect to one Web site other than the one which is also a search engine, what happened? can you help me?

  You get a pop-up window or dialog style without menu or the toolbar either? In this case:

  38 of Firefox has a little problem with this combination of circumstances:

  (1) turned off tabbed browsing
  (2) viewing a page in a private window
  (3) you click on a link encoded with target = "_blank", which launches the link in a new window

  The new window opens without menus, toolbar, scroll bars, etc.

  Work on this bug is in progress, but I don't know if the fix will be available in the coming weeks. These are the known workarounds so you can continue using windows browsing private - one of them will work around the bug:

  (1) use tabbed browsing (there is a checkbox in Options > general > "Open new windows in a new tab instead");

  (2) shift + click the links to open in a new window with standard features. or

  (3) change a bunch of hidden settings as explained below - it will not you make changes to the way you use Firefox, but sometimes you need to enlarge some small pop-up windows that have been sized for a window with no toolbar displayed.

  # 3, here are the steps:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste feat and make a pause so that the list is filtered

  (C) for each preference that begins with dom.disable_window_open_feature. , if it is not 'true', double-click it to true.

  You may find that you prefer this anyway, given that sites can band is more these pop-up windows features.

  Who is relevant or do you have a different question?

• When I slide the icon in the bar of awesome make a shortcut on the desktop, it will open Internet Explore instead of firefox. Help.

  I want to make a shortcut on the desktop for firefox. As indicated, I tried to drag the small round icon on the desktop. This new shortcut pointing to internet explorer instead of firefox. How can I make a shortcut of firefox?

  Try this

  • http://support.Microsoft.com/kb/2820848