Server 2008 R2 installation will not configure on DV7 series laptop

I installed the Server 2008 R2 on a laptop DV7-7012nr. I upgraded the memory up to 16 GB. I deleted all the partitions, and then divide the hard drive into 2 partitions. Partition 1 is 7 442 Go Windows, Partition 2 is 256 GB server.

When I install, windows server 2008, in dual boot, it will not complete the configuration for the material. This leaves me the choice either reinstall Windows server 2008 and to come back to the same error or return to windows 7.

How can I get a dual boot for a full installation of Windows server 2008 R2 Enterprise Edition or Standard on my DV7-7012nr laptop?

After spending 5 days with installing Server 2008 R2 64-bit on this laptop, I contacted the HP Support. Technical support HP and after 4 hours and 7 different technicians, I was informed that they can not help me with the installation of Server 2008 on this laptop. I know it's possible, and I installed Server 08 several times that I can remember. I'll have to this laptop with the conclusion that although HP says that it will work, it will not return.

Summary; Windows Server 2008 R2 64-bit Standard or enterprise will not be installed on the HP Pavilion dv7-7012nr laptop.

Tags: Notebooks

Similar Questions

  • Windows Server 2008 Evaluation ISO will not read as boot, help drive!

    I downloaded the ISO of Windows Server 2008 Evaluation on my Windows 7 Ultimate Office. Then I burned it on a disc using windows image burner. After that I tried to install it on my server. Tried to leave as the only boot device dvd drive and it still did not read the dvd as a boot device. Help, please. Am that I supposed to burn using other software or something? Help, please. Thank you.

    Please repost your request in one of the most appropriate Windows Server Forums, thank you.

  • PowerEdge 2600 and Windows Server 2008 R2 installation problem

    Hello.

    I have a Dell PowerEdge 2600 server. Here is the configuration:

    BIOS version: A14

    2 x Intel Xeon 2800 MHz 533 MHz, 512 k (SL6VN)

    4 x 1 GB of RAM

    2 x 146 GB (IBM-IC35L146UCDY10-0) in RAID1

    6 x 147 Gb (Fujitsu MAP3147NC) in a RAID5 configuration

    Firmware for the PERC 4/Di 2.52D

    It has worked well during the installation of Windows Server 2000. But now I need to install Windows Server 2008 R2.

    Here's the problem: when I boot server to Windows Server 2008 R2 installation DVD, it starts to load the files and after a few minutes shows an error (I copy the exact error number) who said he's trying to run the 64-bit application, but unfortunately, this processor does not support 64-bit applications.

    I was able to find a download for Windows 2008 x 64 on the page Support of Dell PowerEdge 2600. This means that you can install an operating system 64-bit on this PE 2600, is it not?

    I know that Windows Server 2008 x 64 and Windows Server 2008 R2 are different operating systems, but 64-bit is always 64 - bit.

    Also, I know that Intel Xeon 2800 MHz 533 MHz 512 kb (SL6VN) is a 32-bit processor, but if it was delivered with these processors, and there are downloads for 64-bit operating systems exist, it should be able to install these operating systems.

    Please tell us how can I install Windows Server 2008 R2 on the PowerEdge 2600.

    Thanks in advance.

    The list 2008 x 64 in the list of OS for the 2600 is clearly a typographical error / support/web content team:

    You pay for 2008 x 86 as the latest OS on 2600... or get a newer server (starting with the 8th generation of servers as the PE 2800) to operate 2008R2.

    "2008R2 is a 64-bit operating system that is not as forgiving as 2008 x 64 on the execution of threads of 16 bits."

    16-bit applications are not supported in 64-bit operating systems:
    http://blogs.technet.com/b/chitpro-en/archive/2009/04/14/Windows-and-16-bit-applications.aspx

  • Window Media Center will not configure my Xbox says that there is an error in moan by train

    Window Media Center will not configure my Xbox says that there is an error in moan by train

    Hello

    What is you get the exact error message?

    Please follow the steps mentioned in the links below.

    Set up a Windows Media Center Extender device

    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Windows-Media-Center-Extender-device

    You tried to set up your console Xbox 360 as a Media Center Extender, but the installer is not started

    http://support.Microsoft.com/kb/916180

    http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Windows-Media-Center

    http://support.Xbox.com/en-us/Xbox-360/audio-video-Setup-and-use/Media-Center-FAQ

  • my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

    my laptop will not configure adobe air, I've uninstalled and reinstalled and still have the same problem

    Hi David,

    1. what exactly happens when you try to configure Adobe Air?

    2. you receive all of the error codes or error messages?

    If the installation of AIR was very good and you are facing problems with the configuration, you may need to contact Adobe support for further assistance.

    Adobe support

  • Updates will not configure Win 7 64 bit

    Windows Update will download updates of Win 7 will not configure them. After the reboot it will configure at 15% and then I get an error message that says: "failed to configure updates. To eat.  Windows 7 64 bit

    I sent a support email, but they cannot understand it. How can I overcome this?

    OK, I thought about it. I installed all the updates of security and then installed all updates of system at a time and they have all installed.

    Thanks for all your suggestions.

    Jerry

  • Creative suite 4 master collection of error installation will not install Premiere Pro, still, indesige, flash, ps4, sequelae.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running. 

    Creative suite 4 master collection of error installation will not install Premiere Pro, indesign, flash, Photoshop and AfterEffects.  He was installing everything.  Have tried reinstalling several times.  The firewall turned off and no other programs running.  Running windows 7 64 bit.  Had no problem with installation on my last computer 64-bit windows 7

    It seems that everything is installed now.  Don't know how, but I think that I opened it as administrator.

    Thank you

    Corey

  • I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

    I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

    I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop

    =================================
    If it is a recent issue, of what it may be worth trying
    do a restore of the system at a time before everything started.

    See the following article:

    (306084) how to restore Windows XP to a
    previous state
    http://support.Microsoft.com/?kbid=306084

  • Microsoft windows fax and scanning will not start on my computer laptop windows 7

    Microsoft windows fax and scanning will not start on my computer laptop windows 7

    Original title: fax and scanning

    Press Windows key + R

    Type: optionalfeatures.exe

    Press enter

    Expand Print and Document Services

    Uncheck the fax and scan Windows

    Click OK

    Reboot if prompted

    Press Windows key + R

    Type: optionalfeatures.exe

    Press enter

    Expand Print and Document Services

    Check fax and scan Windows

    Click OK

    Reboot if prompted

  • Cannot install printer on Server 2008 because Onenote is not installed?

    I am trying to install a printer on a Server 2008 computer.  But when the installation checks for the printer, it stops and says, Onenote must be opened first.  I'm not planning to install any version of Office on this server.  Why am I blocked?    If I use the add a printer utility box, he wants to add a PostScript driver, and of course, I don't want to, I want the PCL driver and it doesn't give me that option either.

    Why should the world Microsoft be so difficult?

    Hello

    The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the best support.

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  • Windows Server 2008 - Group Policy does not

    Hello

    I recently deployed a windows 2008 (32 std) additional domain controller for our windows 2003 DC. and I moved to make PDC FSMO roles in 2008. now I get error when I open Group Policy and none of the policy is to take users. the error is "the network name is not found.

    I run the command adprep/adprep domainprep/gpprep command when I deploy the windows Server 2008. below error, I get in the event viewer for the same thing.

    "The Software Installation Group Policy Client Side Extension was impossible to apply one or more parameters, because the changes must be processed before logon startup or user system. The system will wait for the treatment group strategy to finish completely before the next startup or logon for that user, and this may result in slow startup and startup performance '.

    Please advice. Thank you

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the following forum:

     

    http://social.technet.Microsoft.com/forums/en-us/categories/

  • I can download all windows updates, but my system will not configure and install them. I have Vista, what happens?

    nfkgjaLRjh:KF'e; ktg; B; love my lifeE

    Hello

    Do you get any error messages? More detail of what is happening and noted that allows us to help you.

    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    ------------------------------------------------------

    If necessary :

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------
    Because these are all Office updates you might get more information if necessary in the Agency of those groups that
    may have experienced the same problem.

    Office newsgroups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Microsoft.public.office.misc discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • my windows installation will not be completed which is why my pc not started.what can I do?

    My a was restart again, once again, then I update my Windows xp with the cd... what cd copying files after removed my pc blocking at 59% of the files.then copy I switch off the pc after startup it is not working properly and always crashes after awhile as before... my installation of windows will not be not complete which is why my pc don't started.what can I do?

    Hello

    Do you have any other operating system installed on the computer?

    The CD/DVD that you use to install Windows XP may be damaged and this is a possible reason why you cannot complete the installation of Windows XP.

    You can check with another CD/DVD to install Windows XP. In the meantime, you can also check out this link that talks about the installation of Windows XP.

    Install Windows XP
    http://Windows.Microsoft.com/en-in/Windows-XP/help/Setup/install-Windows-XP

    You can also check out this link that talks about the hanging of Windows XP configuration.

    http://support.Microsoft.com/kb/828267

    It will be useful.

  • Windows Installer will not work. I have Norton Antivirus, CCleaner, Securia, etc.. Some programs start more. I have Office 2002 and my processor will not open.

    After problems with my system slows down, I found Windows Installer, stop operation. I have Windows XP Home Edition, SP3. I have Office 2002 and my processor will not open. I tried to install install 4.5, but it wouldn't work.  I can't start in my Services, either, even if it is configured to start automatically. I don't know if I just need to migrate to Windows 7 and do with it or continue to try to solve this problem!

    My hard drive is failing and replaced with the new computer.

  • Server 2008 rdp client does not keep by default local printer

    Question: Windows XP workstation connects to the client terminal server 2008 for an application. The local workstation XP has a based LPT printer. The local printer is selected to be used through the RDP client and can be seen on the Terminal Server session. The central issue is that the RDP session will not keep the local printer the default XP workstation. It can be chosen and works, but never stays after the end of the session and reconnect or even log out of the session and you reconnect. It never remains the default printer, instead, it takes the default value of the server administrator. 1 of 7 other network printers.

    Points: The XP workstation has a printer LPT laserjet 4000 series as is the local default LPT. I followed a Tech Note "http://support.microsoft.com/default.aspx?scid=kb;en-us;302361" which seems to have nothing to do with this topic.

    Note: The server is standard with clients more Terminal server 2008. All the network printers according to works, and other customers to keep printers default network without problem.

    Annex Note: http://social.technet.microsoft.com/Forums/en/winserverTS/thread/2a6944a1-d1cb-492c-b413-75dcbe7dad9b is linked. I have this strategy enabled for all other customers. I guess what would be necessary, would be a work around.

    Hello Brian Weiser.

    Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Windows Server 2008 and would be better suited to the TechNet community. Please click HERE to find a community that will provide the support you want.
    See you soon

    Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Problem of Simulation multivibrator

    Hello I'm trying to simulate a simple multivibrator which I intend to use it to generate a square wave. I use this circuit: I think that there is no problem with this circuit. Almost everywhere, I found this structure. In virtually, the tour starts t

  • Not Internet Explorer, but Google Chrome is unable to download

    Because of software problems and other errors and laptop computer mouse by selecting a bunch of files and folders lost a lot of them, I returned the computer to the factory settings. Windows updates have been installed and Windows Essentials virus pr

  • FWHM with peak detector

    Hello I know that I write a question that has been asked many times before, but looking through the answers to these questions, I was unable to find a solution that worked for my case. Joined a VI for reading data (much like a chromatogram), I need t

  • How can I get more memory? Should I go through Dell (it is a Dell computer)? I get the message too low virtual memory.

    I get the message "out of virtual memory"... In order to buy more memory, can I contact Dell for this (there is a Dell computer)?

  • Windows install 4.5 and SeBackupPrivilege

    Windows Installer team blog, I understand that Windows Installer 4.5 was supposed to add the SeBackupPrivilege in the privileges held by the service msiserver (see http://blogs.msdn.com/windows_installer_team/archive/2008/05/01/what-changed-in-window