Server 2012R2 Standard Remote Desktop redirected printer stops printing 372 Win32 error 2147500037
All of a sudden that all users RDP cannot print on any redirected printers on Windows Server 2012R2. Printers appear on printers and devices on the server. Print jobs appear in the queue on the server, click local device, but disappear without printing queues. Same behavior for multiple computers, Windows 7, se8, all users, including administrators. Easy Print installed. Work on it for hours without success. For any help or suggestions appreciated!
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Tags: Windows
Similar Questions
-
Remote Desktop redirected printing
Whenever a user connects to one of our terminal servers, a 'Remote Desktop redirected print' appears in the print queue.
I read the solution is to uncheck the "Printer" under "Local resources", but unfortunately, our users need to pass the local printer to their Server Terminal services session.
Any advice would be much appreciated.
Thank you very much
Chris
Hello Chris,
Thanks for posting your query in Microsoft Community.
I understand that you have problems with the Terminal Server Services in Windows.
The computer is connected to a domain network?
If so, post your request in the TechNet forums because they have more expertise on this issue. Follow the link below to do the same thing:
Forums TechNet for Windows 7
http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworkingI hope this helps. Otherwise, feel free to write us again for more information.
-
HP envy printer range: HP envy with Win7 Remote Desktop RDP printing problem
Hello
I have a printer HP envy 5530 works well for my laptop.
When I connect to my Win7 Remote Desktop Server (on which HP envy drivers are also installed) and try printing locally on my HP local printer, it does not work.
When I look at my local mobile print queue, I see two copies of 'Remote Desktop redirected Printer Doc' contained in the queue. One of the queue said copies and then print. Impression size document in the print queue shows 4 KB that is abnormally low, then the missing documents from the print queue, but are not printed on the printer.
Note that I have no problem with the same laptop, same Remote Desktop server, but using a different printer (not HP).
I saw that on several forums (including this one), many users have this same problem but I've never seen a valid response that solves this problem with RDP.
Any idea?
Thank you
I solved the problem by creating a new printer on the local computer and configure the port to the Standard TCP/IP port with the IP address of the printer and the HP Deskjet 6940 driver use. Deskjet 5500 driver may work as well.
The problem is with the specific Envy 5530 driver. -
Server 2008 R2 Remote Desktop Server printing problems...
Hello
We have recently installed a Server 2008 r2 remote desktop server. Everything works well except sometimes once a user has printed a large number of documents remotely a print job fails. The only mistake he gives may not print.
Once this problem starts they then won't even be able to print locally to a printer connected to the server. The only way to solve the problem is to disconnect and turn it back on.
We checked to see if the spooler is running, it is not a remote printing problem, that it does not start even local print will work for this user. We also checked to make sure that the print queue is not an uptight work.
How we solve this problem?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
"Remote Desktop connection has stopped working" problem on Windows 7.
When I try to connect to one of my Windows 2003 servers from my Windows 7 Ultimate pc, I get an error:
"Remote Desktop connection has stopped working". It has something to do with the NLAapi.dll. If I rename this dll, TS works very well. I used the dll from another computer running Windows 7 RC and it works too, but in one of these two cases, while it corrects the TS connection, it causes other errors, maily with the network and sharing Center. Long story short, I think that there is a bug with nlaapi.dll. I can connect properly to my boxes of Windows XP SP3 servers. I ran all the updates on my 2 k 3 box, but still does not work.Here is the log of the event viewer:
Name of the failing application: mstsc.exe, version: 6.1.7600.16385, time stamp: 0x4a5bce80
Name of the failed module: NLAapi.dll, version: 6.1.7600.16385, time stamp: 0x4a5bdfc9
Exception code: 0xc0000005
Offset: 0x000000000000c138
ID of the process failed: 0xf90
Start time of application vulnerabilities: 0x01ca55cc39bf05f0
The failing application path: C:\Windows\system32\mstsc.exe
Path of the failing module: C:\Windows\system32\NLAapi.dll
Report ID: 7772b4f0-c1bf-11de-bfa2-001d60a28de8Hi dekopolis,
Thanks for visiting the site of the community of Microsoft Windows 7. The question you have posted is related to the Server 2003 and would be better suited in the Community (Insert here). Please visit the link below to find a community that will provide the support you want.http://social.technet.Microsoft.com/forums/en-us/categories/ Shawn - Support Engineer - MCP, MCDST
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Remote Desktop Connection has stopped working since 7 for 2008
Hello
Dears I have strange problem and I have read everything discussed here, but it's not helping
I have asus laptop with Windows 7 Home x 64 N53SM
everything beautiful, and up-to-date
Remote Desktop works well also
one problem I can't use desktop remotely from my laptop to any server that is running windows server 2008 exactly... .other version 2003 work ok
When I try to access to any server ruin win 2008 Server and put the server ip and password user name years and hit enter I see the error message
Remote Desktop Connection has stopped working and computer laptop freez second then back with this message
(Remote Desktop Connection has stopped working)
A problem caused program stop working correctly
Windows will close the program and notify you if a solution is availableThis is the complete log of the event viewer
Results for: Microsoft product: Windows operating system; Version: 6.1.7600.16385; Event ID: 1000. Event source: Application error;
===========
Name of the failing application: mstsc.exe, version: 6.1.7601.17514, time stamp: 0x4ce7ab44
The failed module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec4aa8e
Exception code: 0xc0000374
Offset: 0x00000000000c40f2
ID of the process failed: 0 x 1418
Start time of application vulnerabilities: 0x01cd48bcf13be48a
The failing application path: C:\Windows\system32\mstsc.exe
The failed module path: C:\Windows\SYSTEM32\ntdll.dll
Report ID: 39102a22-b4b0-11e1-a89a-005056c00008===========
Please help me to solve this problem without need format :)
Hello
As you try to desktop connection remotely from Windows 7 to Windows Server 2008, it would be preferable to send the same in the Technet community for more help.
http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads
Hope the information is useful.
-
What should I do to get rid of a "Printing cancelled win32 error: not enough memory available to process the command.
Hi Jerome,
· You receive the error when you try to print?
If so, check to see if the following helps you.
Run the next Fixit tool to check the issue.
Problems printing and printing errors
If this isn't what you are looking for then respond with more information so that we can help you best.
-
In the remote desktop printing 2 or 3 pages continuously. with the USB printer. It isn't printing first page only 2nd and 3rd pages. But in the task of the printer local special impression is get queue. It's like appear and disappear. Please help me solve this problem
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:
General Forum(Windows Server) Technet
Hope this information helps.
-
Remote Desktop connects then stops after a few seconds
I have two laptops to Windows 7. We run OpenVPN which I will refer to the VPN server. The other is the Client and with me on trips. Open VPN is configured on the Client and the VPN server, and I can connect from inside and outside the network without any problems. I also have an Open VPN Client with another port configured on a server QNAS. I can connect without any problems.
I want to run the OpenVPN server on one VLAN separated to prevent users to see my internal network and only sees another NAS. I also use the VPN to offer our few users (3) the ability to connect and use my static IP address.
I have a router TP-Link-ER-6120. I can configure the three ports to run in 3 separate VLANS. When I configure the VPN server works on my regular network to exploit the VLAN1 and VLAN2, I can always connect to OpenVPN and all I want to do works (NAS and Internet access with my static IP). However, when I try to establish a Session to the VPN server computer remote desktop, I get the login and enter my user name and password. I see the remote desktop window, open and usually see the remote desktop wallpaper and loading the desktop icons. Then it crashes. If he does until I can see the desktop, it automatically attempts to reconnect. If she makes it that far, it stops with a window that says Remote Desktop connection has been disconnected.
If I come back in the configuration of the router and change the configuration of VLAN for the server VPN is on the same virtual network, I can connect and the remote desktop connection is successful, as long as the customer is located on my network. If I connect the Client to the VPN server from outside my network in this configuration, the remote desktop will always fail in the same manner described above. I also have a QNAS on my network with OpenVPN configured and operational. If I connect the Client computer to the QNAS, I can connect to the VPN server until the VPN server is placed in its own VIRTUAL LAN.
Thus, work Desktop connections to local computers.
However, since a remote off-grid remote office connections begin to work, but are stopped when connecting.
-J' I ping the VPN server during connection attempts and never lose the connection.
-J' used telnet to Server VPN 3389 port and it connects.
-J' turned off the firewalls on both sides and went up to remove Symantec on the VPN and BitDefender server on the side side Client to use Windows Firewall on both. And then disabled Windows Firewall as well and still no joy.
Is there a setting in Windows I'm missing that allow the desktop connection remote on the LAN, but not enable during login remotely even if I can ping, telnet and usually access the rest of the network?
Is it maybe a configuration problem on the side of the router? Installation side route is a very simple graphic interface. I configured for the VPN service roads and they remain in place (one for the QNAS) and one for the OpenVPN server. I set up a static route (virtual server) for port 3389 go directly to the IP address of the VPN server, but that did nothing.
Miss me probably something simple, but it launched my ass for weeks now.
Any ideas?
Hello Michael,
Thank you for visiting Microsoft Community and we provide a detailed description of the issue.
By the description, I understand that the problem with remote desktop connects and then stops after a few seconds on the system.
Certainly, I understand your concern and will try my best to help you.
To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.
Please visit the link below to find a community that will provide the best support.
http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer
I hope this information is useful.
Please let us know if you need more help, we will be happy to help you.
Thank you.
-
I'm running Vista 64 to connect to a remote computer that has Windows Server 2008. When the remote desktop connection via, under the options for sound local computer that I "Make to this computer" activated. However I still get all the sounds, and the volume in the lower right corner icon has a red x on it. Under the heading reading devices, it says "no audio device is installed". In Device Manager, I don't see anything for sound and audio devices.
I found an article that mentioned the sounds and Audio devices in Control Panel, however I have only 'His' option - which opens the same as right click on the volume with mute icon and choosing of reading devices. I don't see anything on the RDP Audio Driver settings.
Here's a screenshot of my desktop remotely, with the Control Panel, Device Manager, and open windows of his:
http://img27.imageshack.us/img27/959/screenshotxqp.jpg
How to activate the sound remote desktop?
Hi Tsaton,Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums, since it is linked to the issue in Windows Server 2008 machine. Appropriate in instances of Windows Server.
Please post your question in the Forums of Windows Server.
-
Remote Desktop Web Apps stopped not opening on all multiple monitors
We have 2012 R2 Remote Desktop Services server. Last week, we open applications in all 6 screens that we are ok. If I have all 6 active screens it will not pass the different screens of the main screen. If I turn off three of the monitors it allows me to move my apps on all three screens ok. What is happening on pc Windows 7, so I tried the update to Windows 10 with the same results.
Hello
Thank you for being part of the Microsoft Community.
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.
General Forum(Windows Server) Technet
Back to us for any issues in the future. We will be happy to help you.
-
Connection remote desktop and printing problems
Hello
I use Windows 7 on my desktop and also connected to Windows Server 2008 R2 to run applications in Windows Server. However, I have noticed there is problem with printer problems. Sometimes, when I tried to print some documents with applications in Windows Server with my printer in my room, connected to the desktop computer, it won't work.
Besides, I need to go to Windows Server, restart the Printer Spooler Service component, so it does not yet. It is a pain.
I also noticed there is to wait about 30 seconds to process any document to print.
Unlike if I print documents directly from my local desktop computer that is running Windows 7 and is connected to a local printer, it takes seconds to print.
My office is connected to Windows Server 2008 via LAN. I wouldn't have such a significant delay in printing.
I also wonder why Printer Spooler needs to be restarted when the printer does not work.
Can someone advise me on this? Peut - what Microsoft looks at this problem and release updates to fix the bug to improve the system?
Thank you
Kind regards
Clement
Hello Clement,
Welcome to the Microsoft Community Forum.
The question you posted would be better suited to the TechNet community.
Please visit the link below to find a community that will support what ask you:
Microsoft TechNet
http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
Thank you
-
Windows Server 2012 R2 Remote Desktop Server - user session crashes when you connect to the wide
From time to time, a user session hangs during registration out of the Windows 2012 RDS.
This has happened for two different users. Whenever the session hangs with the message "signature" and the user can not log such as they appear with the same message by.
I connected to the RDS as administrator, checked the Task Manager and found that an office application always work, such as Excel.
When I complete the process of the office application and disconnect the user through the Task Manager, the user can log in again.
I reinstalled the desktop software and still happens from time to time...
Any suggestions?
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)* -
It is necessary (or even possible) to use the CHANGE USER/install and CHANGE USER/execute commands to install a program in a Terminal Server (RDP) Services environment so that it is available to other users via RDP?
Hello
The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads
I hope this helps.
-
Remote Desktop cannot connect to the remote computer
Hi all
I'm having a problem on my server running Windows Server 2008 R2.
I can not can not on the remote server by using remote desktop (mstsc).
Here is the error I get when connecting:
Remote Desktop cannot connect to the remote computer to one of the following reasons:
(1) remote access to the server is not enabled
(2) the remote computer is disabled
(3) the remote computer is not available on the networkMake sure that the remote computer is on and connected to the network, and remote access is enabled.
I tried to restart the services, but nothing helped.
I even restarted the server, which did not help.
Also, I can ping the server without any problem.
Kindly help. !
Hello
Search logs events on the Terminal Server and the Local user's PC
Try disabling the firewall - may have to be reconfigured.
I suggest that repost you the question in the TechNet Windows Server forum for assistance.
Maybe you are looking for
-
new graphics card for a desktop Pavilion p6657c PC
This computer has a 250 watt power supply. I want to get a new video card with more specialized memory (1gig) to accelerate a business program. The operating system is windows 7. CPU is AMDAthlon II x 2 220. It came with an nvidia GeForce 6150SE nFor
-
When I start my computer, it goes Strait to the windows Boot Manager. How can I stop this?
-
HP Officejet Pro 8600: hp officejet 8600 cups duplex
I had this problem before, but I can't easily find my previous bug report, perhaps this was done on another forum. I'm trying to Print Duplex HP OfficeJet Pro 8600 using hplip in Arch Linux. I don't see an easy way to attach my file cups but I think
-
How to see several audio tracks?
I have a mov file which has two tracks - music and a voice-over. When I export PR it exports only the music.How can I get both channels to be seen and exported?(Ironically, Premiere CS3 shows all audio tracks, 2 channels stereo, default - no work re
-
Provide read permissions to others for the weblogic/Managed Server log files
HelloWe want to give read access to others under linux for all the oracle weblogic logs including the journal .out file.We put 022 startweblogic.sh file. Set-aside are the output-----rw - r - r-. 1 oracle oinstall 81586 Apr 15 22:43 access.log-rw - r