Server Agent fell by only showing a single FGLAM. Run the EXE
has been no change. any ideas on what we seek in the first instance?
Thank you
I've seen it. Best to open a support ticket.
Tags: Dell Tech
Similar Questions
-
EA6500 only shows no device connected to the switch of working group 5 ports
I just replaced a defective Linksys e4200 with an ea6500. After assistance by phone, I got to the top and work, but only one computer on my LAN is not displayed.
I connected an 8 port 10/100 switch Linksys my 4200, and my wife's computer was connected to that. The computer displays the IP as 192.168.1.133 and it is connected to the internet with my router again. But the ea6500 does not show a device with the ip address. Instead, he shows what he calls a network with the IP 192.168.1.130 device.
How can I see the devices connected to the switch 5 ports and determine which ip addresses, they have been assigned?
I use a switch with my network with a router EA and it shows the devices correctly. Turn off the computer which does not appear in the list of devices and check to see if any device will appear as offline adter who. Remove from the list of devices, and then restart the router. Once the router is ready, open the page of the router again and turn on the computer and check if it will be detected correctly. I hope this helps.
Edit: Check and make sure you have the latest firmware loaded. Otherwise, update the firmware and do a reset after the update of the firmware. Check your list of devices after that.
-
Hello
need help with something really strange.
I create a Restaurant website: www.arkadasch.de
I test on my server the Site: www.bbaur.com/arkadasch
As you can see I got the top of the page an element Ede animated.
When I look at the site on my server www.bbaur.com/arkadasch, you see the element works correctly. You see on the two sites of the 'face' of the apearing name.
I have download the site now the clients site and the edge of animation is showning only half? Only the name of the left site is apearing and not that of the right?
I downloaded the same site two areas and it is always the same. My only he is on the right.
I have delate my cache also.
Someone has an idea?
WOW-found the error.
The name is written 'o'. and the psd file is named «Özden»
I have change the name of "ozden" to "zden', delate the German symbol 'o'.
Modify the edge of animation, save again, insert into Adobe Muse and now it works
-
link work on desktop computer. but only shows do not reach into the Muse phones
the pictures of my office page show the hand and the links work. But one of my images of the phone does not show the hand nor the link works.
Please check out the link on the image, see in the preview, if the link works correctly. Is different layout is not used and even office serves on phone, then we might need to check the file.
Thank you
Sanjit
-
DBA_TABLESPACE_USAGE_METRICS display only shows UNDOTBS2 on node1 of the RAC 2node (11.1.0.7.0)
Greetings,
I am facing a weird problem on my production db where querying the view of DBA_TABLESPACE_USAGE_METRICS only 1 row (UNDOTBS2) of return on a RAC 2node node1.
Whereas, node2 returns information about all the tablespace. I can't find the cause of the difference.
DB Info:
OS - AIX 6.1
DB - 11.1.0.7.0 (node 2 CARS) on ASM
Kindly help me to solve this problem.
Rgds,
G Pal
Bug 6629893 Inconsistencies in DBA_TABLESPACE_USAGE_METRICS confirmed 11.1.0.7. I would like to raise a SR, this looks like a bug.
-
I recently bought a cDAQ-9172 with several modules. One of the modules is a NI 9481 relay module. I created an application using Labview and built an exe file. If I run the exe on the computer, it was developed on the relays work properly, that is, they remain locked up until their status is changed. If I run the same exe on a computer with only the Labview runtime installed (no software installed), the pulse relay contacts and not locked. I'm using Labview version 7.1 for my development and execution. Everyone knows about this problem?
Ignore this announcement, the error stems from a difference between each computer ini-files and has nothing to do with the Labview Labview runtime vs, my bad developer.
-
Every time I try to open a pdf document that is located on a server or in our company (so not on my laptop), reador always shows error. Cannot open the document. Just in case I have copy the document into my local PV, I can read without problem. Server is mapped in my FileExplorer (Win7). So boring and big bug I think.
Massage of error: "there was an error opening this document. The network path was not found.
Could you please try to disable Protected Mode under ' Edit > preferences > (protection) "and see if that helps.
Let me know.
Kind regards
Ana Maria
-
Hello
Lack of VMWare VirtualCenter Server 2.5.0.64207 on a Windows 2003 R2 SP2, SQL Server 2005 System. It is the only significant application on the system, and VirtualCenterDB is the only database.
We see that the system is running very slowly, both regarding the response time in the Console of the Infrastructure of VMWare and the response time for all other programs that you happen to run. For example, the MMC administration tools take a long time to start or respond to clicks.
PerfMon shows fairly low CPU usage, but the queue of average drive about 170.
However, the problem disappears if we stop the SQL Server Agent service. The average disk queue goes down to about 2.
I don't want to always leave the SQL Server Agent is turned off, because it is necessary to perform periodic maintenance. Is there a way to tell why the readers of SQL Server Agent use so much disk space? Given that VirtualCenterDB is our unique database, I suspect that the problem is specific to VMWare.
Thanks in advance for your suggestions.
These jobs move data from system of VPX_HIST_STAT1 to VPX_HIST_STAT2 then VPX_HIST_STAT3 then VPX_HIST_STAT4 and finally remove the data from your database. These tables to the expectations of the performance data for your hosts and virtual machines and jobs here correspond to the data of the basic performance levels than your game in the VI client when connected to your vCenter server. It is important to keep these tasks to make sure that your weekly, monthly and annual data are properly maintained.
You have a database maintenance task that rebuilt the index? If this isn't the case, then it is perhaps probably caused performance issues. Without up-to-date indexes, SQL Server will be compelled to resort to analysis of tables when looking for data that can significantly increase the disk i/o.
-
only get a single photo on board contact despite the selection of several columns.
When you select the photo and contact sheet then, there is only a single photo in the upper left column. Unable to get several copies despite the selection of several columns.
The contact sheet shows only the photos you selected in the library before going to the page of Contacts.
If you want to have multiple copies of the same image, you need to duplicate this image enough times so that you get the number you want on the contact page. Select the thumbnail and use the key combination command + D to duplicate the photo.
Select all duplicate images, and then go to the Contacts option in the printing process.
-
I installed a hard drive 500 secondary gig, after re-booting the properties for the new drive hard only show 48.8 GB are available. where is the rest of the memory? Its not partitioned to another eather drive
original title: hard drive problems(1) what does your BIOS the drive size?
============================================================
2) disk hard test - find your make and model:
Speccy - computer/system information in detail
(More detailed look at your memory and CPU)
OS, CPU, RAM, card, graphics, hard drive, optical drive
Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - CD Bootable:
Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective. Test your drive with the factory utility. If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools (bootable CD) and check bad sectors:
http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRDFor Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic================================================================
(3) HD Tune:
Provides information of the car and has an option (tab scan error) to test your drive.
http://www.hdtune.com/SpeedFan:
Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
It displays your drives model number and compares your drive with other discs of the same brand and model.
http://www.almico.com/SpeedFan.php-Partition management utilities-
Partition Wizard Home Edition:
http://www.partitionwizard.com/free-partition-manager.html
Note: There is also a CD bootable or versions of the bootable Flash drive:
CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
Among the features and functions: create partition, Delete partition, format partition,.
A partition resize, move partitions, Partition recovery after an accidental deletion,
Convert the partition, partition Explore, Hide partition,
Change the drive letter, a partition active Set, Explorer (content display) of the partition.
Note: To complete any task use the "Pending Operations" box at the bottom left.Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASUS have almost identical user interfaces)
EASEUS Partition Master Home Edition (free):
http://www.partition-tool.com/
Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.J W Stuart: http://www.pagestart.com
-
12 c on the repository server management agent does not start due to a failure of the system
My environment architecture for 12 c Cloud Control (used for the purpose of personal practice) can be explained as follows:
@DBSERVER: (OEL6.5, x 86-64)
-12 c Enterprise Manager Cloud Control (EMCC)
-Database 11.2.0.4 which acts as a repository for 12 c EMCC
Monitored host is on a virtual machine (VM12) which is currently in the DBSERVER:
VM12: (OEL6.5, x 86-64)
-12 c Management Agent which monitors host and database (12.1.0.1)
The server worked fine for months until recently when the computer has restarted abruptly. Abrupt restart has occurred several times in the past, but this time, he had a problem when restarting. The DBSERVER when a startup starts the SGC and the AGENT. WHO starts perfectly, but the AGENT does not start. On trying to start the agent, it displays the following error message:
[orcl11204g@dbserver bin] $. / emctl start agent
Oracle Enterprise Manager Cloud control 12 c Release 3
Copyright (c) 1996, 2013 Oracle Corporation. All rights reserved.
Starting Agent... failed.
Manager of target failed to startup: targets.xml was rejected: loaded with a token incorrect agent
See emctl.log and emagent.nohup in: / home/u01/oemrel3/agent/agent_inst/sysman/log
[orcl11204g@dbserver bin] $
The targets.xml file contains the following information, which do not seem to be of any help:
[orcl11204g@dbserver emd] $ cat targets.xml
<? XML version = "1.0"? >
<>targets
< / objectives >
[orcl11204g@dbserver emd] $
Anyone can provide assistance in such circumstances?
The DBSERVER repository database, the auditor and the who are running, while the agent is down. VM12, listener and agent database is running. Is there another file that should be checked for more information?
--> $/ AGENT_INST/bin/emctl stop agent
If the agent does not stop is free then kill all the background process agent first grepping for agent perl and java process only
--> Move your existing target.xml file
MV target.xml target.xml.old
--> Create an empty file targets.xml under/AGENT_INST/sysman/MDTs with the below content
--> Start the agent of
$AGENT_INST/bin/emctl start agent
That starts agent but without all the targets in targets.xml
To the discovery of targets saw agent console resynchronization
Concerning
Krishnan
-
POS for setup of SQL server agent error
Dear community
I try to install the WTP VMware for SQL Server agent, but the installation fails until he actually starts with the following error
Microsoft.SqlServer.Smo.dll version does not match the installation of SQL Server most recent present on the system. Please update your DLL of SMO SQL before running this Setup again.
Required version: 10.x.x.x
The server has SQL Server Express 2008 R2 installed.
I searched through the whole server and I found the following versions of this particular DLL
C:\Program Files (x 86) \Microsoft SQL Server\110\SDK\Assemblies: v11.0.2100.60
C:\Program Files\Microsoft SQL Server\110\SDK\Assemblies: v11.0.2100.60
C:\Program Files\Microsoft SQL Server\100\SDK\Assemblies: v10.0.1600.22
C:\Program Files (x 86) \Microsoft SQL Server\100\SDK\Assemblies: v1.050.2500.0
As far as I know, only one version of SQL was installed and it came with my installation of Solarwinds Orion.
Help is greatly appreciated.
So I opened a case of pension on this issue.
Page 155, in the above document is on the backup and restore MS SQL Server using the SQL agent.
There is a long list of supported SQL server versions, but guess what, SQL Express is not listed.
Conclusion is therefore that only "full" MS SQL Servers are supported for backup. Guess I need to find another way to backup my SQL Express databases.
-
Scan IP is configured only in a single node
Hello
I configure Oracle 11 GR 2 (11.2.0.1) RAC in my VMware. When I checked the listener to ip and CT scan it shows that it is only set in 2nd node to the first node. The nslookup command works fine as indicated below, and when I checked the srvctl status scan_listener and scan of srvctl status it shows that it is running only in the second node. I checked in a few places where the srvctl status scan_listener and scan srvctl status command shows output of all nodes. Can anyone help me on what could be the problem or how to configure the ip address scan and scan listener in 1 node.
*********************
file/etc/hosts
*********************
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost
#: 1 localhost6.localdomain6 localhost6
#public
192.168.32.142 brand mark.oracle.com
192.168.32.152 nike.oracle.com nike
#private
10.0.0.56 brand brand - prv.oracle.com - prv
10.0.0.57 prv.oracle.com nike nike-prv
#vip
192.168.32.20 brand brand - vip.oracle.com - vip
192.168.32.21 vip.oracle.com nike nike-vip
#scan
192.168.32.153 db1 - scan.oracle.com db1-scan
192.168.32.154 db1 - scan.oracle.com db1-scan
192.168.32.155 db1 - scan.oracle.com db1-scan
****************************************
srvctl command output
***************************************
[oracle@nike bin] $. / srvctl status scan_listener
LISTENER_SCAN1 listener to SCAN is enabled
SCAN LISTENER_SCAN1 listener is running on the node nike
[oracle@nike bin] $. / srvctl scan status
VIP scan1 SCAN is enabled
VIP SCAN scan1 runs on the nike node
***********************************
NS lookup command output
***********************************
[oracle@mark bin] $ nslookup db1-scan
Server: 192.168.32.142
Address: 192.168.32.142 #53
Name: db1-scan
Address: 192.168.32.155
Name: db1-scan
Address: 192.168.32.153
Name: db1-scan
Address: 192.168.32.154
[oracle@mark bin] $
[oracle@mark bin] $
[oracle@mark bin] $ nslookup db1-scan
Server: 192.168.32.142
Address: 192.168.32.142 #53
Name: db1-scan
Address: 192.168.32.153
Name: db1-scan
Address: 192.168.32.154
Name: db1-scan
Address: 192.168.32.155
[oracle@mark bin] $
[oracle@mark bin] $ nslookup db1-scan
Server: 192.168.32.142
Address: 192.168.32.142 #53
Name: db1-scan
Address: 192.168.32.154
Name: db1-scan
Address: 192.168.32.155
Name: db1-scan
Address: 192.168.32.153
****************************************************************************************
Kind regards
007
Hello
This is the behavior expected if you use the file/etc/hosts instead of DNS/GNS. It is documented on the note ' RAC: frequently asked Questions (Doc ID 220970.1).
If you want to have more than one listener to scan, and then start using DNS for name of scanning resolution.
Kind regards.
Nelson
-
Installation of the SQL Server Agent on the Virtual Center Server
Hello everyone
I installed VC2.5 on a PowerEdge 1950 server. The SQL VC database will reside on a different server, of course, I understand that you need to create a system DSN. But he also stated that the "SQL Server Agent" must run on the VC server. How to install SQL Server agent? It is installed from the SQL installation CD?
Thank you!!!
SQL Agent is part of the SQL Server installation and only would be located on the database server.
-
Hi all
I installed Oracle SOA Suite for WebLogic 9.2.3 10.1.3.4
Everything works fine, but I make a tutorial for Oracle Web Services Manager, and I see in the documentation for GOSA, that there is a component called PROXY SERVER that can only be created for the following application servers:
Oracle Application Server
Axis
Is it possible to create and configure a proxy (client-side and server-side) to secure web services?
I mean... WebLogig certified to set up a server using GOSA Agent?
Thanks in advanceYes, there is an agent for weblogic server, see http://www.oracle.com/technology/software/products/web-services-manager/index.html to download (see third-party Server Agents). The zip file also contains a PDF on installation.
Kind regards
André
Maybe you are looking for
-
How can I make a USB stick can be used on Mac and PC
I tried to format it in FAT32 and exFAT, but it does not work. I need to transfer files between a Windows 7 PC and my MacBook Air (El Capitan).
-
AC adapter does not work if the battery is not removed on my Satellite?
A few days as my Satellite does not use electricity from the adapter: he wants to only use the battery (so after a few hours, it stops). Connect and disconnect the power supply when the notebook is on or before restarting, it doesn't change anything
-
Windows 7 clean installation Blue Screen of Death (BSoD) on a loop of reboot
Aloha everyone,I did an install customized windows 7 on a new Western Digital 1 TB sata hard drive, which has been formatted, partitioned, scandisk, and a ntfs c drive was created prior to installation.The installation ended safely. I then install m
-
How can I reinstall Windows Media Player 11 for Vista?
I deleted by Windows Media Player 11 error. Even when the Player opens, it is not possible to stream live video. I tried to reinstall it by downloading from Microsoft, but it is not possible. Is there another way to reinstall Windows Media Player 11
-
This computer is not running windows genuine with error HrOffline: 0x8004FE21.
Original title: this computer is not running genuine windows... So, I had this PC for about 3 years now, and even more. Since this computer was bought so long ago and not even by me, but my mother, I don't know where all the CD or have papers for it.