Server does not support the SSL connection

Similar Questions

• I get an error "the server does not support an SSL connection" with a code of error 0x800CCC7D in Outlook express.

  I followed Bruce Hagen and still cannot send to the OE section. Reception is no problem. When I try to send I got the following error msg: "the server does not support an SSL connection. "Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, server response: ' 250 8BITMIME ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D. I tried to change the port for outgoing to 456. When I do so I get this error msg: failed to connect to the server. Account: 'pop.att.yahoo.com', server: 'smtp.att.yahoo.com', Protocol: SMTP, Port: 456, secure (SSL): Yes, Socket error: 10060, error number: 0x800CCC0E.  Is there a cure for this. He just started two days or at least that's when I noticed I cud not send. If you can help me I will appreciate it more. Thank you.

  JP banks

  Original title: cannot send using OE 6. Reception Ok.

  Hi JPBANKS,

   

  Thanks for keeping us posted and share this information with us.

  Glad to know that the problem is solved. Do not hesitate to contact Microsoft Windows Forums for issues related to Windows in the future.

• The server does not support an SSL connection to a Hotmail account

  Original title: the server does not support

  The server does not support an SSL connection. Account: 'Hotmail', server: 'smtp.live.com', Protocol: SMTP, server response: 250 OK', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  The server does not support an SSL connection. Account: 'Hotmail', server: 'smtp.live.com', Protocol: SMTP, server response: 250 OK', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

  Your Hotmail account is configured in Windows mail or Windows Live Mail. Yes?
  If the school is "none"... ignore the rest of my answer.

  If so,.

  Open Windows mail > tools > accounts > click your hotmail account > properties > advanced. Under outgoing (SMTP) Mail, change the port # 25 to 587 > click OK

  see if it's ok now by sending a test message to yourself.

  t-4-2

• Windows live mail send error "the server does not support an SSL connection. Server error 250.

  Original title: Windows live mail error send

  Cannot send mail to Windows Live Mail.  Error message... The server does not support an SSL connection. Server error 250. Server - * address email is removed from the privacy *. Windows Live Mail error ID - 0x800CCC7D. SMTP Protocol.  Port 25.

  It's better, thank you. This message is not from the BT Server; It comes from your Avast antivirus which is intercepting your mail. You would be well advised to turn off the Avast Mail shield; It does not add any additional security if you don't by attention elsewhere, and can cause problems.

  I see that it is the record of mail in bulk that because of the problems in this case. Connect to the Web e-mail account and clear the items junk and deleted records.

  BT is recommended to use SSL, but your original question indicated that SSL was not taken in charge for SMTP on port 25. I think we'd better go on all your settings. Recommendations of BT are on this page: BT email: what are the settings for outgoing and incoming mail servers?, but they only work if you disable Avast scanning mail.

  Right-click on the account name in the folders pane, and then select Properties.

  • Under the servers tab, make sure that my server requires authentication is selected.
    Select connect with authentication in clear text.
  • On the Advanced tab, select this server requires a secure connection (SSL) for both servers.
    Make sure that the incoming (IMAP) port is 993 and port for outgoing (SMTP) is 465.

  When you've made all these changes, close Windows Live mail and wait five minutes for the program do its cleaning and save the modified settings. Then, restart the computer and make sure that the Mail of Avast shield is always off.

  Launch Windows Live Mail, then dial a new test message and send it to yourself. Post a new message in your response.

• LabVIEW 2013 64 bit does not support the 'toolboxes connection database?

  Hello

  I have download the labview 2013 64 bit & registed with success

  But encount a problem when I try to install "2013DCT"(database connectivity toolkits)

  Don't LV2013 64 bit does not support this toolkit?

  If Yes, where can I find the boxes to tools for 64-bit?

  You can install the version 32 bits in a relavent LV and copy the installation.
  /Y

• What do I do about this error? -Server does not support the RFC 5746, see CVE-2009-3555

  I get this message to both cox.pop and a verizon.pop of servers
  When it occurs, TB connects and he's there, without having to download the messages. I can send them however.
  It is an intermittent problem. It is not always the case.

  Thank you in advance.
  Jack

  This is a warning and harmless, if bulky to the error console.
  It is not your problem, whatever it is. It is a warning that your server doesn't support security. But is nothing important in the world of ISPS who refuse to do security as it complicates things and increases their support costs.

  As an indicator, perhaps it indicates your anti virus having a fit. Try disabling anti virus scanning email and see if the error Stops. I have a suspicion it will be.

• If DW 20141 cc does not support the database, connection, server behavior, and PHP/MySQL require it, but using Adobe Extensions Mngr IS DO NOT recommended, then TOOLS WHICH does allow us to develop a database with DW?

  I use windows DW 20141 cc. I'm following lynda.com tutorials to create a website with PHP and MySQL database. I learned that I have to download Adobe Extension Mngr database active, BINDING, panels of SERVER BEHAVIOR, what I've done. BUT NOW, I've BEEN ADVISED NOT to USE THESE TOOLS for all new development. If this is the actually the case, then THAT TOOLS DO I USE to develop a Web site that has a database?

  Ideally, you code your own with (improved) MySQLi or PDO.

  http://code.tutsplus.com/tutorials/PDO-vs-mysqli-which-should-you-use--NET-24059

  Help the Web offer also an Extension of commercial MySQLi for DW server behaviors replace the obsolete.

  MySQLi server behaviors. Dreamweaver extension | WebAssist

  Nancy O.

• Server does not support remote façade panels

  Hello.  Hope someone has an idea about that.  After the computer host and update cDAQ 9139 LabView SP1 from 2013 to 2014 LabView dev suite shipped by NOR, I get the error "server does not support the remote panels" when you try to view my remote panel.  Before the update it worked normally.

  I went through everything in the list in this document, http://digital.ni.com/public.nsf/allkb/C23EF1551D8C52ED86256B140073EE2E and can't find anything that will solve the problem.

  I have rebuilt the application in 2014 of LabView (I even tried a new simple project with a single loop, one of the temperatures and a remote control), rebuilt the build spec and get the same error.

  "I've re-edited the web page and checked in the html code it refers"CODEBASE ="ftp://ftp.ni.com/support/labview/runtime/windows/2014/LVRTE2014min.exe" and I have, according to MAX, LabView DURATION 14.0.1 installed on the host machine.

  If something has changed related LabView 2014 which would cause a new firewall as this remote façade program worked great with 2013 installed?  I've already added that LabVIEW 2014 and all other related apps through the firewall, including the web server.  I am also on a machine that doesn't have a Bluecoat, our company network/internet security suite is installed.

  Thank you

  Michael

  Another possible solution to this problem - operator error.

  See one of my other posts here for details, but I made an assumption about the port numbers and what they apply to.  Two key points - the port of the web server application in the configuration of hardware web page is not the port used to access the remote panel - port is assigned in the properties of the device, the server settings remote control panel in the project.  And they cannot use the same port; This will also lead to the error "server does not support the remote panels.

  Note to the NOR - you must add this to your KB document on the resolution of this error.

  Thank you!

• A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  A Dell PowerEdge 2850 server is used for the new ESXi server, but it does not support the 64-bit VM.

  I can't believe it.

  When I start up a virtual computer, it gives a wrong message shown in the picture below.

  Does anyone have any ideas on this?

  Usually not enabled virtualization technology in host BIOS.

  Take a look at can not power on a 64-bit Windows VM

• 'webplugin' does not support the maximum safety level of safari plugins

  Last night, I got connected to my Svat security system using Safari and left the computer with the browser showing all the security cameras. Early in the morning about 3 or 04:00 I was awake by restarting the computer I noticed that the OS has been updated.

  For now, I am trying to connect to my security system and Safari can not access the server. I went into properties and noticed the ['webplugin' does not support the maximum safety level of safari plug-ins] my security system stop working in windows because of the plugins for a long time so my only option is to use my mac-mini to access the system and now what happens.

  The name of the plugin in the security system is called HiDVRPlugin.dmg and the system is Svat. I tried to go to Safari preferences and enabling the plugin, but it still does not work.

  Any ideas on how to re activate or difficulty this plugin?

  Thank you

  Go back to an earlier version of Mac OS X is not an option? Or may be using a different browser?

• Does not support the Lenovo S650 Usb otg cable

  I bought the new lenovo S650 and I connect the usb otg cable for read my USB but it does not support? Why? Please help me

  S650 hardware does not support the OTG. Regardless of the cable.

  The micro-USB port to charge the phone only.

• Windows media player.cannot play theplayer file does not support the file type or might not support the codec used to compress the file

  Windows media player

  HI. When I tried to play a movie in my windows media player.it says windows media player.cannot play theplayer file does not support the file type or does not support the codec that was used to compress the file and when I click web help it lead me to windows media player error message help.you met c00d1199 error message when you use windows media player.

  Hello

  ·         What is the format of the files that you play when you get this error?

  ·         Do you get what this error during playback of all files or a particular file?

  You may encounter this error message for the following reasons:

  1. the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  2 - the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  You can try the steps and check if it makes a difference.

  a. to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the sections of video codec and Audio codec.

  b. download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download the Codecs of the reader.

• BlackBerry Z10 BlackBerry Desktop Software does not support the BlackBerry 10 operating system

  I am wanting to sync the Z10 with my Mac andhave times link BB and BB Desktop Software but the message it gives me is:

  This BlackBerry device running the BlackBerry 10 operating system.  BlackBerry Desktop Software does not support the BlackBerry 10 operating system. Visit www.blackberry.com/support to learn more about how to synchronize your multimedia files, backup and restore data from the camera and more, with your device.

  All software are up to date on Mac and BBZ10

  What should I do?

  You have the two desktop software and link configurΘ for dΘmarrer when a device is connected to your Mac. You must go into the Desktop software settings (I don't remember exactly what to do, but there should be some settings at the top right) and set it to not open when a device is connected. Once you have it set to not open when your phone is connected, make sure that the link is set to open. That should solve your problem.

  Let us know if that helps you.

• The destination does not support the EFI firmware.

  Hello

  I have a Debian Linux 7.0 physics I'm P2V using converter 5.5.3.  When I choose my target ESXi server, I like:

  The destination does not support the EFI firmware.

  How confirm/deny, or enable the EFI on my node ESXi support?

  Hello

  This may be a false signal. The problem is that Debian is not a taken GOS supported for the converter. That's why he treats her like "Other Linux" and then the ESXi responds that it does not support the "other Linux" on EFI.

  Unfortunately I see no significant workaround solution. There is a crazy idea - converter checks if the source computer's BIOS or EFI by searching the directory/sys/firmware/efi/vars. If you can somehow it wrong that there is no (I don't know how), it might treat the source such as BIOS and convert it. When this happens, you should then change the VM of destination to EFI firmware and manually create the EFI boot entry somehow.

  Concerning

  Plamen

• Mail server does not accept the Mails of Log (misuse of SMTP command pipelining)

  Hello

  my mail server does not accept the ghettoVCB Logmails.

  The receiving mail server tells me after:

  503 5.5.0 < DATA >: data command rejected: improper use of the command pipelining SMTP;

  I thought it was related to the "of:" and "to:" after the DATA command, but this comment with a # did not help.

  It will not work unless I call the last restriction of this param...

  smtpd_data_restrictions = reject_multi_recipient_bounce,

  reject_unauth_pipelining

  Is this something that can be fixed in the ghettoVCB script or what I need to with this life?

  So long

  Presssack

  EDIT: My guess is that the script just throws the whole mail on the mail server and do not wait it gets permission to send data part... rude boy!

  Watch the "Email Backup log (LOAD EXPERIMENTAL grip)" part on the project page. Send you a mail server must support SMTP pipelining.