Server printing 2012 with RDP clients.

Similar Questions

• Can upgrade you Windows Server 2008 RC with SP2 to Windows Server R2 2012 with the option to upgrade?

  We currently have the server running Windows Server 2008 RC with Service Pack 2 installed. We want to upgrade to Windows Server R2 2012 with as little cost involved as possible. You can run the upgrade Windows 2012 Standard R2 of the disc on a Windows Server 2008 SP2 RC 64-bit environment?

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• policy of what server windows works with MAC clients.

  If link us any PC MAC in windows server 2012 as a client machine then that bends works Microsoft strategy on the MAC client.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• L2TP/IPSec connection failed for Windows 7 Ultimate for Windows Server R2 2012 with error 789.

  For this preface, I use the server in a lab environment and trying to set up my own VPN L2TP/IPSec. I opened the UDP 500 and 1701 TCP ports on my router for the interface of the primary server where is the VPN. It is on a Comcast connection consumer where other applications such as Arma 3 servers dedicated and IIS have worked.
  The RRAS role to run based on this tutorial: http://www.thomasmaurer.ch/2014/01/how-to-install-vpn-on-windows-server-2012-r2/ I have only strayed from it using DHCP forwarding instead of a static pool of IP as my router is running a DHCP server, and if I understand correctly, the router must give IP addresses of the internal IP pool which I use for everything else. I also use the PSK authentication rather than be based certificate. For the authentication of users I have MS-CHAP-V2 and CHAP enabled; I connect from the remote device with an account on that I created on the server for the purpose of this VPN I know RRAS connections are allowed.

  When the connection I get error 789: L2TP connection attempt failed because the security layer detected a processing error during initial negotiations with the remote computer. From what I've seen, this can be fixed by checking that the two ends of the connection are not behind a NAT (not an option), verification of the PSK (already done) and certificates (not applicable). If there is a way to solve this problem that would be great, but my server will always be behind a NAT firewall because the router is one, and the modem becomes one if several devices are connected to him without a router between the two.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• USB redirection works with a view Windows Client that connects to a Pool of RDS running Server R2 2012

  I installed the Agent view Horizon (6.0.0) and direct view connection Plugin (6.0.0) on a physical server running Windows Server R2 2012 with desktop Services remotely active.  I would use the USB redirection from the client to the server.   When I connect to the remote desktop session by using the Windows Vista client, he tells me that the USB redirection is disabled.   I tried connecting the View Client to the server view connection and directly to the RDS Server with the same result.  I need to activate RemoteFX on the Windows Server running RDS for USB redirection to work?  I don't have any hardware remotefx, that's why I have not yet tried.

  USB redirection is not supported on the RDS (2008 or 2012) guests in Horizon 6.0.

  see you soon

  peterB

• Server 2008 rdp client does not keep by default local printer

  Question: Windows XP workstation connects to the client terminal server 2008 for an application. The local workstation XP has a based LPT printer. The local printer is selected to be used through the RDP client and can be seen on the Terminal Server session. The central issue is that the RDP session will not keep the local printer the default XP workstation. It can be chosen and works, but never stays after the end of the session and reconnect or even log out of the session and you reconnect. It never remains the default printer, instead, it takes the default value of the server administrator. 1 of 7 other network printers.

  Points: The XP workstation has a printer LPT laserjet 4000 series as is the local default LPT. I followed a Tech Note "http://support.microsoft.com/default.aspx?scid=kb;en-us;302361" which seems to have nothing to do with this topic.

  Note: The server is standard with clients more Terminal server 2008. All the network printers according to works, and other customers to keep printers default network without problem.

  Annex Note: http://social.technet.microsoft.com/Forums/en/winserverTS/thread/2a6944a1-d1cb-492c-b413-75dcbe7dad9b is linked. I have this strategy enabled for all other customers. I guess what would be necessary, would be a work around.

  Hello Brian Weiser.

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Windows Server 2008 and would be better suited to the TechNet community. Please click HERE to find a community that will provide the support you want.

  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• How many user take RDP at the same time with different user login ID in Server R2 2012

  How many user take RDP at the same time with different user login ID in Server R2 2012?

  How many user take RDP at the same time with different user login ID in Server 2008 R2?

  How many user take RDP at the same time with different user login ID in Server 2012 starndard?

  How many user take RDP at the same time with different user login ID in Server 2008 standard?

  This issue is beyond the scope of this site (for consumers) and to make sure you get the best answer, we need to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• vmxnet3 adapter on windows server 2012 with problem of bottleneck for MSSQL Server

  Hello!

  We have a server windows 2012 R2 with MSSQL server 2014.

  The client software uses the jdbc for database connection. If customers make a query which collects a massive amount of data the whole thing slowed down after a while.

  Then, his need to wait 10-20 minutes to speed up again. I have tested and tried everything.

  -measure the ethernet parameters

  -replace the cables by cat7

  -installed a virtual machine with the windows client and the real customer use the virtual environment via rdp

  -activated the RSS in the vmxnet3 advanced settings and windows

  -the mode SplitRx in vcenter vm settings and disabled ethernet Coalescent too

  -set the VM to high latency

  -tried to migrate the virtual machine to another host

  Not for their help. If a massive sql query is run first its great, then the need for a second or more to check a single record.

  checked the vm cpu stress but its less than 5% all the time. Checked the network with wireshark, there are a lot of small packets but nothing big. The bandwidth used is still low.

  When its idle delay after two packets will increase from a few ms to 400-500 ms.

  Our most powerful server is an HP DL380 G9 with two octa core Xeon processor 384 GB of ram, full SSD datastore. Its a lightning fast host.

  The virtual machine have 8 core cpu and 64 GB of ram.

  No matter where am I up the virtual machine or how many resources provide the custom aisle question.

  The strange thing is when customers slowed down I can copy large files between the client and the server with fast speed, so the slow sql.

  I can solved this question if I use the ethernet E1000 instead of the VMXNET3 adapter, but E1000 have much more load and the server need to transfer big files too, not only the sql service.

  Vmxnet3 much faster and have less overhead, but this question of sql, I have a problem with that. So I go back to the E1000 for now. Its slower eat more cpu but the sql connections works very well without any problems.

  Can someone tell me what I can try harder to identify the vmxnet3 problem? I really need it to improve network performance and lower overhead, but the rapid sql is the top priority.

  Thank you!!!

  We had exactly the same problem on our SQL servers once upgraded to Vsphere6.This is due to Receive Segment coalescence feature in new VMXNET3-nics on Win 2012.

  More details here: http://nickmarshall.com.au/blog/2015/7/24/vsphere-6-hardware-version-11

  The best way to solve this problem is to turn it off completely in the server operating system (in the admin command prompt):

  netsh int tcp set global rsc = disabled

  
  

  Check with:

  
  

  netsh int tcp show global

  It's fast and easy without downtime or disruptions and involves no change types of nic.

  After doing this on all our SQL and application servers, everything was ok.

  
  

  
  

• Implementation of IPSec Port Forwarding on a Windows 2012 with a LRT224 Server

  Hi all I hope someone can help me validate my troubleshooting. I'm deploying a Server Windows 2012 that will server as a server vpn for customers. In place is a LRT224 with 4 VLANS set up. I have enabled port forwarding for IPSec (UDP/500), L2TP (UDP/1701) and L2TP (UDP/4500) to go on the server.

  In my Initial test, I put the LRT224 on the same network as the client of my test and realized the Test Client (10 Windows) to try to connect to the WAN of the LRT224 interface. I get this message:

  

  Thinking it could be the configuration of the server, I then put the client system on the same vlan on the LRT224 server. When I tried to connect to it directly by using the IP address of the server as a destination, he succeeded.  It is leading me to believe that it is the LRT224.

  I confirmed that VPN passthrough is enabled.

  The firmware version is by: v1.0.5.03 (February 22, 2016 10:12:17)

  Currently, the firewall is disabled (I would activate once I'm working)

  If anyone has ideas or notice a fault in my tests, I would really appreciate the feedback.

  If additional information would be useful, please let me know what you want and I can work for it.

  Thanks to all in advance.

  FreeFallFour wrote:

  I then put the client system on the same vlan on the LRT224 server. When I tried to connect to it directly by using the IP address of the server as a destination, he succeeded.  It is leading me to believe that it is the LRT224.

  It does normally not as I KNOW because the VPN in an outside in the process. You should test the VPN connection outside the server's IP subnet.

  You have the server configuration that the DNS server in the router to DHCP with DNS Proxy is disabled?

  Are you doing load balancing Internet connection?

• HP Officejet Pro 8500 has compatible with w2k8 R2 e-all-in-one printer drivers and XP clients.

  Hello

  I am looking to buy one-

  HP Officejet Pro 8500 has e-all-in-one printer (CM755A) - for our Organization, we use Windows server 2008 R2 Standard 64-bit with XP clients and wanted to know if this printer is compatible with w2k8 R2 drivers?

  Looking forward to hear from you.

  Thank - you

  It is compatible, but what I recommend is to get a newer version of the 8500 which is 8600

• Print spooler print server 2008 crash with file hpb6sy2917_x64gui.dll error

  Print spooler print server 2008 crash with file hpb6sy2917_x64gui.dll error

  This happened on 02/10/15 and happened again on 24/02/16. We have two printers that depend on this file. HP Color LaserJet 553 and HP LaserJet M604. I have over a hundred of the M604 on my network and the last time that this happened, it dominoed across the print server system.  This has also caused some spools of printing stop on end users. The only way I can get end users up is to uninstall the driver package.

  This issue affects the Windows Server 2008 and windows computers 7 as well.  Try to determine why this has happened twice and determine how fixit before the rest of my Server 2008 and end down as well.

  The error lies in the hpb6sy2917_x64gui.dll.

  

  This time I had to remove the printers and drivers with a regedit. I also deleted all files in all files for 2917 in the

  C:\Windows\System32\spool\drivers\x64\3 folder. But this time, when I reinstall the M604 M553 drivers and it lowers again print server spooler. I'm frustrated to say the least.

  I tried clearing forcefully queues by deleting files in C:\WINDOWS\System32\spool\PRINTERS

  Hello

  According to the description of the problem, you work in the Windows Server 2008 domain environment. So, I suggest you to republish your query on the TechNet forum, which is run by the other IT professionals who are trained on the server issues. However, you can try to run the REG file that was downloaded in the link provided by Ramesh Srinivasan in his position, responded on June 2, 2012 in the thread link provided below and see if it helps you to solve the problem.

  Deleted print spooler service

  http://social.technet.Microsoft.com/forums/Windows/en-us/9d0bd665-621d-449E-a22f-b512e068ba2a/print-spooler-service-removed

  If the problem persists, try to repost your query on TechNet forum. Keep us.

  Kind regards

• Another gateway server desktop remotely in the RDP client file

  It is possible to specify another gateway server desktop remotely in the RDP client file?

  Thank you
  David

  Hello

  The question you posted would be better suited to the TechNet support forum. I suggest you to check with TechNet support for more information.

  http://social.technet.Microsoft.com/forums/en-us/newThread?category=WindowsServer&Forum

• where to find the download for 11.2.0.4 Oracle client, Server Windows 2012

  Hi all

  I was instructed to install 11.2.0.4 32 and 64-bit clients to Server Windows 2012.

  I can't find the download page for the latter.

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=535798508932133 & ID = 1231433.1 & _afrWindowMode = 0 & _adf. CTRL-State = 8qqh4jwyv_58

  States that, fortunately, we can now use 11.2.0.4 32/64 bit client with 2012 (but does not tell us where!)

  So will OTN...

  http://www.Oracle.com/technetwork/database/Enterprise-Edition/downloads/index.html

  I don't see anything for 11.2.0.4 it - only 11.2.0.1, but 11.2.0.1 is not supported in Windows 2012

  
  

  Please, if anyone can direct me to the right page, I would be really grateful.

  
  

  DA

  https://support.Oracle.com/epmos/faces/DocumentDisplay?_afrLoop=539595172570209&ID=1454618.1&_afrWindowMode=0&_adf.CTRL-State=jt8f7go3i_142#aref_section21

• Windows XP SP3 with view Client 5.1: unable to connect: discovers the connection connection to the server has failed

  Hi guys,.

  I need help.  I have a problem with my opinion of Client on a Windows XP SP3 computer.  When I click on connect, I get the following message immediately:

  "Failed to connect to the view connection server. Verify that the server connection mode address and network settings are correct. »

  A few details:

  My client's IP address is on the same subnet as the view connection server

  There is no firewall and DNS solves the login server see very well.  Here is the output of my customer's orders

  C:\ > nslookup X.X.X.172

  < resolves very well >

  C:\ > nslookup dd - view.viewdomain.com

  < resolves very well >

  C:\ > nslookup dd-notice

  < resolves very well >

  C:\ > tracert X.X.X.172

  < works great >

  If I open a browser on the XP workstation which is a failure, I can go to https://dd-view.viewdomain.com.  It displays the page that I need to connect with View Client. What do I think, so this should check the connectivity between the two.

  I've seen customer 5.1.0 build-704644 installed on my Windows XP SP3 client computer

  My connection to the server is running 5.1.1 build-799444 and is configured with a pool of offices 25 clone related with SSL active

  LAST IMPORTANT NOTE: I have the same version of the Client view (5.1.0 build-704644) installed on another Windows 7 workstation on the same subnet and it connects to my view connection server office pool very well.

  I tried to install the three versions of the customer view of this system of XP SP3 including the latest version, when the connection after installation, they all fail the same way. My body needs to function. The client machines can not move to something more recent to Windows XP SP3 because I am not the administrator for them.

  Any ideas?  Is this a bug or is Windows XP SP3 just not supported with view 5.1?

  VR,

  Brian Whyte

  Political of McAffee HBSS blocked 443 attempts out of the customer to view.

  The difference is that the Windows 7 machine that worked was becoming another policy HBSS applied to what was not blocking attempts.

• Adobe Reader DC contains errors and crashes with Windows Server R2 2012

  We have recently installed Adobe Reader DC Adobe version on our servers Windows Server R2 2012 and have problems since its launch. Few of the questions that we have seen are as follows:

  1. This version is a little awkward and crashes.
  2. A lot of pop up boxes that appears whenever I open a document.
  3. Whenever I open a document it is a box pop up welcome
  4. It is a little slow to respond between clicks
  5. If I click on options like file. The application hangs and then crashes. (see crash message attachment)

  Any help to solve this problem would be useful.

  Thank you

  
  

  Questions for users confronted with this question:

  1. do you have the preview pane enabled in file Explorer? If so, you can temporarily disable it to see if the problem goes away? On Windows 8, in Explorer, go to the view tab, and if you press the button "Preview Pane", UN-press it. On Windows 7, upwards to the right (to the left of the help icon) there is a button "show preview pane." UN-press it.

  2. ensure that the following directories exist on your machine. If this isn't the case, please create them:

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheAcro

  C:\Users\USERNAME\AppData\Local\Adobe\Acrobat\DC\ToolsSearchCacheRdr

  Replace USERNAME with your username.

  Is - do this 1 or 2 to solve this problem?