Server & project is not accessible?

Hello

I've updated to your new 2015 Dreamweaver today and since I was not able to see the files on my server.

He tells me to "set its version control settings. It is an error message I've ever seen elsewhere.

Once I do that, I get an error "server & project is not accessible.

I didn't change my settings since the upgrade. Why would he do that?

Thanks for your response

Maybe in relationship:

Update available: Dreamweaver CC 2015 (16.0.1): Adobe Dreamweaver blog

Using Dreamweaver | Specify the proxy server settings

Tags: Dreamweaver

Similar Questions

  • The domain name server ( DNS ) is not accessible

    Dear all,
    Need your big help here.
    Currently, I face below Internet connection problem at home.
    For this reason, I am really worried and I am not able to video chat with my family for the last days 6 :(
    Please help me
    In fact, I use a laptop provided the office with Microsoft Windows XP Professional/5.1.2600/SP3
    I use the same laptop at home too. Just do the below
    1 obtain an IP and DNS server address automatically
    2 disable the proxy in LAN setting
    For the last 3 months, it went well. Really not sure what happen last Thursday. The internet does not work at evnthough I am able to connect to the local network.
    I searched on the net (at the office) and followed all the steps below. But the problem still exists
    1. check all cables the same I replaced the new LAN cable
    2. downloaded and run WinsockFix
    3. reset WINSOCK entries
    4 release/renew IP address
    My details:
    Using the connection ETHERNET WIRWED
    1394 net adapt #2 - status (connected, firewalled)
    Intel(r) 82566MM Gigabit Network Connection - status (connected, firewalled)
    Broadcom 802.11a/b/g WLAN - status (connected, firewall)
    C:\Documents and Settings\scfb > IPCONFIG/ALL
    Windows IP configuration
    Name of the host...: San-kartcs
    Primary Dns suffix...:
    Node... type: mixed
    Active... IP routing: No.
    Active... proxy WINS: No.
    ... DNS suffix search list: kr.standardchartered.com
    Ethernet wireless network connection card:
    State of the media...: Media disconnected
    ... Description: Broadcom 802.11a/b/g WLAN
    Physical address.... : 00-21-00-44-76-F8
    Ethernet connection to the Local network card:
    The connection-specific DNS suffix. : kr.standardchartered.com
    ... Description: Intel(r) 82566MM Gigabit Network Connection
    Physical address.... : 00-1E-68-90-E3-00
    DHCP active...: Yes
    Autoconfiguration enabled...: Yes
    ... The IP address: 192.168.200.100
    ... Subnet mask: 255.255.255.0.
    ... Default gateway. : 192.168.200.254
    DHCP server...: 192.168.200.254
    DNS servers...: 168.126.63.1.
    Lease obtained...: Monday, December 12, 2011 21:49:36
    End of the lease...: Monday, December 12, 2011 22:49:36
    C:\Documents and Settings\scfb >
    While scnanning services "in Help and support center" from the start menu through "Use tools to view your computer information and diagnose problems" for the diagnosis of network
    . He FAILED in 'network adapters '.
    The Internet (DNS, Domain Name Server) service provider is not available
    Network cards
    DNSServerSearchOrder = 168.126.63.1 (FAILED)
    Ping 168.126.63.1 with 32 bytes of data:
    The inaccessible destination network.
    The inaccessible destination network.
    The inaccessible destination network.
    The inaccessible destination network.
    Ping statistics for 168.126.63.1:
    Packets: Sent = 4, received = 4, lost = 0 (0% loss)
    Time approximate round trip in milli-seconds:
    Minimum = 0ms, Maximum = 0ms, average = 0ms
    Checked all services and seems to be well
    System event COM + (for WZC issues)-getting started
    Computer browser (browser of the computer will start when necessary)
    DHCP client - started automatically
    DNS Client automatically
    Network - started manual connections
    Network Location Awareness - started manual
    Remote procedure (RPC) call - started auto
    Server automatically
    TCP/IP Netbios helper-autostart
    Automatic configuration (XP wireless configuration) wireless
    Autoconfiguration WLAN (Vista wireless configurations) service
    Workstation - auto
    Please suggest me some ideas that will be really useful for me and my family:)

    Hello

    see this link:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-networking/ICS-XP-Windows7-DNS-server-not-responding/0338b59a-2ffa-4070-BA2E-bd5d847fc8a7

  • BIS blackBerry smartphones and POP server not accessible via internet

    Hey guys,.

    I think I have some 9000 "BOLD" for some users at work.

    We currently have a pop3 mail server that is not accessible via the internet. (Not webmail)

    I could use BIS to push mail for the "BOLD" and would it synchronize deleted items / sending and reading of the "BOLD" back to my mail server?

    I don't see how an email that I deleted the "bold" be synced to outlook on your laptop.

    Kudos for taking the time to read my post.

    Hi and welcome to the Forums!

    BIS, serves as an intermediary between the messaging services connected to the internet (POP, IMAP, etc.) and BB. If the server you want to interface to these BB is not connected to the internet, then BIS can not access.

    BES might work... you would have to buy and host BES in-house (after make sure you it can interface with all your internal mail server is, of course), and then facilitate the communication between your internal mail server and your business from BB. I don't know the level, but I think that the financial investment to reach BES is not negligible.

    Good luck!

  • Lack of Configuration section in VAMI, vCenter active watch is not Accessible after upgrade from 5.5 to 5.8

    Hi all!  I'm having a bit of a problem that I can't find a solution for anywhere.

    I have a lab with two boxes of vcsa under 5.5 U2d, and wanted to move to 5.8 SRM.  I started the VRA 5.5.1 (I do not remember, real version number which was with MRS 5.5.1), mount the ISO 5.8 on both sides, restarted both, took the update of the CD (following the official update steps), but after the restart, the two vCenters show "enabled (not available)" and still list it as 5.5.1.

    I have validated the RV service is running.  I have been following this thread, regenerated certificates for the TWO vCenters & TWO VRAs: vsphere upgrade from 5.5 to 5.8 Server replication enabled (not accessible) has yet no joy.

    I checked the CROWD and the IP address is correct.  I tried to check /opt/vmware/hms/conf/extension.xml for the thumbprint and the file does not exist on each box, the only thing it is extension - template.xml.

    On the one hand, I have reset the vCenter database (/ usr/sbin/vpxd - d of VMware KB: reset the vCenter Server repository embedded for vCenter Server Appliance 5.x ), deployed a new VRA 5.8, and he had to register very well.  It's then it dawned on me what missed me: almost all the Startup Configuration where you specify the vCenter (see attachment)

    For grins, I recorded the VRA 5.8 of the 'old' vcsa work and tried to save it to the 'new' vcsa, which he could not with a lot of what looked like errors, assuming that because of 'new' vcsa already having a recorded SOAP VRA.  I re-recorded it back to the 'old' vcsa and is happy.  Installed SRM 5.8 (uninstalled 5.5 because I started with a clean database in the vcsa) and all is well on the side of the 'old '.

    I'm trying not to go this route on the 'new' side, as I a VDS, vSAN and twice as many hosts, so I won't recreate the vDC, cluster, add guests, etc.  I copied to /opt/vmware/hms/conf/extension-template.xml /opt/vmware/hms/conf/extension.xml and restarted.  Footprint arises, but still no configuration tips.

    Anyone have any ideas?

    Thanks for your reply. You said that the VRA is on a cluster, East of thatcluster HA-enabled? Because where HA must restart the VRA on another host, it does so through the ESX host and this could have emptied the OVF environment. And to even you'll always a working configuration until you start the upgrade or you try to perform any operation through VAMI configuration page. To be on the safe side, I think before upgrade, you can power off and then turn the unit on (simple restart is not enough) to make sure that the EPS of the FVO is recreated.

  • Project and server are not accessible! (175002)

    This is the error message I get whenever I try to use Dreamweaver to connect to my server:

    "Project and server are not accessible! (175002).

    I know that this subject has developed for people using Subversion. But I don't use a Subversion.

    It never happened until I made the last update to Dreamweaver.

    Please notify.

    Thank you!

    The f

    Because this is a Subversion error, I suspect that Dreamweaver tries to access the repository, and as you have not, you get the error.

    How to solve this problem is to develop the files Panel by clicking on the icon at the far right:

    Then select the icon for the remote server.

    You can then restore the files to normal size panel. This should solve the problem.

  • Desktop\SharedDocs is not accessible. You are not allowed to use this network resource. Not enough server storage is available to process this command.

    \\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
    I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
    There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
    What I've tried so far on my pc (XP Pro):
    1. click on start, run, type regedit, and then click OK.
    2. Locate and double-click the following registry subkey:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
    3. on the right side, double-click restrictanonymous setting.
    4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
    5. close the registry editor.
    6. restart the computer.
    I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
    File and printer sharing exception is enabled in firewall. Don't have a firewall part 3

    The two guest account are capable of Simple file sharing in XP Pro box checked also checked.

    Hello

    Please visit the following link.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/three-computers-networked-fine-then-suddenly-the/3976b554-bb9c-4920-881f-38eb64480ca7

  • -name of the server is not accessible you could are not allowed. I used windows server 2003 and windows xp as a client, the error is delivered in windows xp

    -name of the server is not accessible you could are not allowed. I've used windows server 2003 server and windows xp as a client, we use workgroup

    comed in the client error when we open the Working Group

    Hello

    Questions like these are much better handled in the TechNet IT Pro Forums.

    My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

    http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • \\mycomputername is not accessible. you might not have permission to use this network resource. comtact the administrator of this server to find out if you have access permissions.

    \\mycomputername is not accessible. you might not have permission to use this network resource. comtact the administrator of this server to find out if you have access permissions.

    Hello

    Thank you for giving us the opportunity to help you with the query.

    I understand the inconvenience caused, now that you have me with you I would take care of that.

    I suggest you refer to the steps suggested byJack MVP (replied on August 29, 2010)

    In the next thread that speaks of a possible solution to the related question.

    PC is not accessible. You might not have permission to use this network resource. Contact the editable from this server to find out if you have access permissions.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/PC-is-not-accessible-you-might-not-have-permission/26a1a479-8BA5-4213-9181-02364c884937

    It will be useful.

    Let us know the status, we are happy to help you further.

  • ACS 4.1 LDAP server is NOT accessible.

    Hello

    We have ACS 4.1 running. Everything seems to be (and is) works very well. But when I want to add a mapping of LDAP group I get message saying of error 'LDAP server is NOT accessible. Please check the configuration. The ldap authentications are working well, I can't add a groupmapping. Where should I start to troubleshoot?

    Regards Marco

    Marco,

    1 have we not many groups in an LDAP or AD structure?
    2 what is your Admin DN also right to query database?

    ACS authentication with a generic LDAP user database

    http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UsrDb.html#wp354562

    Setting up a generic LDAP external user database

    http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/UsrDb.html#wp354805

    Also, if please download the softerra LDAP browser to fetch the correct information and configure accordingle.

    http://www.ldapbrowser.com/download.htm

    HTH

    JK

    The rate of useful messages-

  • Master/slave server is not accessible

    We have server standalone install, but then I go to system-> finder object and try to look for something: I got the following error:

    "Master/slave server is not accessible.

    This usually indicates a problem with the user identity system. Go to common Services > server > Security > identity system configuration. Re-enter the user name and password and ensure that points of user name for an account with full access to all applications of the LMS and tasks.

  • \\HOME-server is not accessible. A device attached to the system does not work.

    I use Windows 7 Professional. My network server is WHS V1.

    I have a shortcut on the desktop to \\HOME-SERVER on my W7 machine.
    All of a sudden it has stopped working.
    I get the message
    \\HOME-server is not accessible. You might not...
    A device attached to the system does not work.

    I found that the command line net view \\HOME-SEVER gives (and by typing this in an address bar of the Explorer does not work)
    31 system error has occurred.
    A device attached to the system does not work.

    And this net view \\HOME-SERVER\Music gives (but in typing this in a browser address bar works!)
    53 system error has occurred.
    The network path was not found.
    However, net view 192.168.1.99 (my server address) correctly list the share on the server names (and entering \\192.168.1.99 in Explorer address bar works).
    I did a system restore until the problem occurred first to rule out any changes to the system.
    The problem occurred again.
    This means that my Sync Center shows none of my synchronization partnerships.
    Can anyone suggest the setting or service that must be corrected to solve system error 31 problem?
    TIA
    Hello
     
    The question you have posted is related to Windows home server and would be better suited in the Windows Home Server Forum.
    Please visit the below mentioned link to find a community that will provide the support that you have requested.
    http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/
     
     
    Thank you
  • vSphere replication upgrade from 5.5 to 5.8 active server (not accessible)

    I was doing a vsphere replication update today from 5.5 to 5.8 and upgrade part seems to be okay.  After restarting the device however my vcenter reports that the server is not accessible.  I did something wrong?

    I followed the steps here. VMware vSphere replication 5.8 Documentation Center

    I searched a bit, but the only solution I found was to ensure and powering of the device and the Tower back on rather than just restart it a fix, but that has not seemed to help in my case.

    Thank you

    If anyone is curious who don't end up fixing it was the certificate as I feared.  So after all this ironed out, which was still two days of work because of how long I would have this vcenter install go.  Everything has been fixed after replacing my old self signed cert with a new.

  • Site Web Server not accessible via the internet

    Hello Apple community,

    I had a problem with the.app Web sites, where my site Internet (FQDN) is accessible via the network internal, but not accessible through the internet. I have port ports 80 and 443 passed on my firewall and I can see the ports open via nmap on an external connection.

    When I browse the site via http, I get redirect to 443 then it just resets and I get no error page. Internally, the page redirects to 443 and loads fine with the popup of trust initial cert (self-signed cert) that I then store to my keychain and loading the page well. I get no this pop up via an external network.

    Accessibility is accessible by 80 (green circle icon) but not of 443 for reasons I can't understand.

    I already tried to remedy the situation of the measures:

    Create a new self-signed cert to use. (same results)

    Disable ssl and disable redirection. (causes a load error in the browser)

    Wiped the OS reinstall OS X El Capitan and.app. (same results)

    Checked the port forwarding on my firewall Meraki 15 times (looks good)

    Disabled the feature IPS of the PPE on the Meraki (same results)

    Maybe I'm just on something? I hope someone out there can help.

    Thank you!

    Well, thought about it. < bangs head >.

    ATT Uverse uses port 443 for flow towards Wireless HD receivers in the House. There is a way to change the port it uses, and I'll try and do it later and post my results in case someone else is having the same problems.

    Thinks... "Why the hell ATT would use a common port for Wireless HD? SMH.

  • DNS server is not accessible

    Hello

    Here's my problem. IM using Windows XP Professional on my PC and high-speed Internet ACCESS.

    I planed one as server and gain access to the internet with another server in a LAN based network.

    I used Eternet ADSL cable to connect to my server, then use another NIC to the LAN.

    LAN network successfully established and I have granted full access to the server that I decided, and I share internet through this connection successfully, even when I ping 4.2.2.4 as main road access to the internet, it gets all of packes, which means that I have access to the internet, but I can't visit a website in my internet Explorer , means Server DNS is not yet shared!

    Server have no problem like this.

    What should I do now? Am I missing something?

    That's would be 'Card Ethernet connection to the Local network' to the DNS server, if I understand correctly.

    in some ways, I put it manually in the settings of 'Internet Protocol' of 'Connection to the Local network' in this way:

    Preferred DNS server: 4.2.2.4

    Auxiliary DNS server: [of my ADSL IP Modesm]

    and then move the problem. Now I can visit a Web site with my internet browsers.

    Thanks for help.

  • My download folder is not accessible. Help!

    I'm under El Capitan. I had installed OS X Server and I wanted to turn on file sharing. The folder to be shared was downloads. I then removed the folder from the file sharing console. Now, my download folder is no longer available:

    at the command prompt:

    MacBook: ~ codrut.popescu$ ls - al

    LS: Downloads: permission denied

    Total 80

    drwxr-xr-x + 22 personal codrut.popescu 748 Mar 30 23:11.

    drwxr-xr-x 6 root admin 204 22 Mar 23:56...

    -r---1 codrut.popescu of staff 7 Mar 22 22:28. CFUserTextEncoding

    -rw - r - r-@ 1 codrut.popescu personal 14340 Mar 30 20:25. DS_Store

    drwx - 5 personal codrut.popescu 170 Mar 30 23:24. Trash

    -rw - r - r - 1 personal codrut.popescu 7486 Mar 30 23:11 .bash_history

    drwxr-xr-x 149 personal codrut.popescu 5066 Mar 30 23:12 .bash_sessions

    drwxr-xr-x 5 personal codrut.popescu 170 Mar 30 02:05 .oracle_jre_usage

    drwxr-xr-x 5 personal codrut.popescu 170 Mar 30 02:05 .sqldeveloper

    drwx - 3 personal codrut.popescu 102 Mar 30 21:27 .ssh

    drwxr-xr-x 3 personal codrut.popescu 102 26 .vim 21:25 Mar

    -rw - 1 personal codrut.popescu 11411 Mar 30 22:04 .viminfo

    drwx - 3 personal codrut.popescu 102 23 March 00:24 Applications

    drwx - 5 personal codrut.popescu 170 Mar 30 23:24 Desktop

    drwx- + 7 personal codrut.popescu 238 Mar 30 15:31 Documents

    drwx-@ 54 1836 30 Mar 14:39 library staff codrut.popescu

    drwx- + 3 personal codrut.popescu 102 Mar 22 22:19 movies

    drwx-5 170 26 Mar 03:03 personal codrut.popescu music

    drwx-@ 5 170 26 Mar 03:04 OneDrive personal codrut.popescu

    drwx- + 3 personal 102 25 March codrut.popescu 00:45 photos

    drwxr-xr-x + 4 personal codrut.popescu 136 Mar 30 22:59 Public

    MacBook: ~ ls codrut.popescu$

    Applications Office Documents downloads library movies music OneDrive public photos

    MacBook: ~ codrut.popescu$ ls-l

    I can still see the content of my downloads folder in the console of the X server. But it is not accessible from the Finder or Terminal. How can I access it again?

Maybe you are looking for