service cannot accept control messages

Similar Questions

• I get a message saying "the service cannot accept control messages" when trying to install AVG. What could be the cause?

  I get a message saying "the service cannot accept control messages" when trying to install AVG. What could be the cause?

  original title: error message

  Hello cd1968,

  Here's what he says about this error in the MSDN library (http://msdn.microsoft.com/en-us/library/ms833805.aspx):

  Explanation:

  There is a lag between the requested control and service control status. The service may be in a State of waiting to start, shutdown - pending or stopped.

  User action:

  Wait a few minutes and try your operation again.

  In other words, wait a bit and try again.  You can also try to reboot (be sure to allow time Windows to load completely) and then try to install it.

  Thank you
  Darin

• Error: c:/windows\system32\whatyouclickedon.msc the service cannot accept control message

  Help so confused trying to attach 1 get prob. an another system32 group policy error as no system restore and the control panel will not work correctly and sometimes logon I have no user profile

  someone please help im so confused, I got something weird, I guess that this auto downloaded on my computer do not know it showed up in my toolbar at the time and it looked like the symbol of windows firewall but wasn't it was a supposed antivirus program who wanted to buy me out well I got the blue screen a second after I saw it and my anti virus program did not I spent hours and now am Finally able to connect under normal start up instead of safe mode I think pretty well I found it, I saw an add on IE at the exact moment it happened and it turned off and was able to start fine have not seen since scanned for all after normal startup and he found nothing, but I find myself with these weird problems since this thing very happened from time to time as each start 2 ups or so on normal startup, I don't have any trash a few icons, fonts is very basic and small and it appears a message sayingsomething is wrong with the user profile and I restarted and everything comes back, but I try to get into the control panel and I can load it fine but when I try to enter the administration tools , it appears c:/windows\system32\whatyouclickedon.msc the service cannot accept control currently message I went to a Forum on here and read a similar and tried solution of type cmd at the command prompt in the search bar and he was able to load regularly but when tried run as administrator happens with the same message when I go into Control Panel as I prev said so I can't do the sfc/scannow and finally I tried to solve by doing a system restore but now it says the same message in the Control Panel, but before he kept coming because it has been disabled by group policy and when trying to get to the group policy I couldn't I'm so confused my head is spinning but I'm not completely stupid comp. don't know where to start or if all these things are a coincidence or really are related may not think about what I'm missing please help!

  You have not completely removed malware.

  Scan with this program:

  If necessary, do all the workSafe Mode with network.

   

  To get intoSafe Mode with network, press F8 at the Power On / boot and use key arrow upward to get intoSafeMode with networking from the list of options, and then press ENTER.

   

   

  Read all the information below before you start:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  How to use Malwarebytes after installation:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  See you soon.

  Mick Murphy - Microsoft partner

• "The service cannot accept control at this moment a message" and the wireless Wlan card stopped working

  My computer is showing a wireless card WLAN stopped and on numerous programs, including the firewall and security, as well as other system error "the service cannot accept a message of control at the moment."  I even tried downloading new spyware thinking that something was inside my computer but cannot download anything.  What can I do?

  Hi irishswede,

  Thank you for visiting the Microsoft Windows Vista Community.  Here are the steps that include the error message you stated in your troubleshooting post.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Windows updates - cannot accept control messages

  original title: can not accept control messages

  Try to install the updates.  They are downloaded, but when I click on an error message the extracted file execution "cannot accept a message of control at the moment."

  Hello

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  It will be useful.

• "the service cannot accept messages of control at the moment."

  Cannot download and install all files. I get this response, "the service cannot accept messages of control at the moment."

  Hi Frank St.

  What web browser do you use? This happens on a particular Web site or any web sites?

  Please provide the complete error message you receive.

  Let us know which files you are trying to download for a better understanding of the issue.

  The problem may be temporary. Wait a few minutes and then retry your operation.

  If the problem persists,

  Step 1: Run Internet Explorer in "no Add-ons" mode and test

  To determine if the error is caused by an add-on, run Internet Explorer in "no Add-ons" mode To do this, follow these steps:

  1. click Startand type Internet Explorer in the box start the search .

  2. click on Internet Explorer (No Add-ons). Internet Explorer opens without Add-ons, toolbars, or plug-ins.

  3. test Internet Explorer to verify that it works correctly. If problems occur always, try step 2

  If no error occurs, the problem is caused by one of the Add-ons that typically load with Internet Explorer. In this case, follow the steps mentioned in the link to determine which add-on is causing the problem

  Optimize internet Explorer

  http://support.Microsoft.com/kb/936213

  (See method 3-2 in the link)

  Let us know if it works

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not start the print spooler service, to get the error message: 1053-service cannot be answered on the local computer.

  Original title: Print printer printing

  I can't get the print spooler to turn on, get error 1053-service cannot be answered on the local computer. I tried password admin and services, but it will not turn on. Any suggestions?

  Hi, DUBOIS,.

  This error occurs when you do not have the latest service pack for Microsoft .NET Framework 1.1.

  Please answer the following questions.

  1. What operating system do you use?
  2. What is the brand and model of your printer?
  3. Did you of recent changes made to your computer?

  While your answer above information, refer to the suggestions for the following link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

  Hope the above information helps.

• My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
  the startup type, click on the pointer, and then select Automatic (delayed start)
  the service status, click start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Message: "the Security Center service cannot be started. I am running Vista, fully up to date with AntiVirus & Anti Malware, & others. Unable to change the center of security of people with DISABILITIES.

  Message: "the Security Center service cannot be started. I am running Vista, completely up-to-date with Avira AntiVirus, Malwarebytes - Anti-Malware, MS/scans of Windows Security Center (for example MS Fix It programs Center), etc. No Malware has been found. Despite me trying to re - set the Security Center using start > Services > SecurityCenter > change to "Automatic (delayed start)" people with disabilities > start > output the re-creation is not the owner and I'm back with no security - with the same message as the original. I spent hours trying to deal with this. There is no known new applications/programs, and the problem started about 3 days ago. Help requested - thanks. JohnG - Sydney

  Hello

  ·         Are you can change the Security Center service parameter by using a different user account on the computer?

  I suggest you to make sure that Windows Defender is running. Follow the below mentioned articles and check.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the method above is not enough, then I suggest refer you the link try the steps and check if that helps:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

   

  Note:

  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  If you are using the original computer and the new laptop image, you will need to purchase a product key to activate the copy of windows installed on the laptop.

  Hope the information is useful.

• Message: The security of Windows service cannot be started

  I get a pop-up windows security problems:

  the Windows security service cannot be started

  How should I do, please?

  Moved from Community Participation

  Original title: windows security

  See if this helps: http://support.microsoft.com/kb/2519899/en-us

• The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  When I try to open security as Malwarebyte Anti-Malware programs or open Control Panel, security, device management and several other items in the Panel I get the message "the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."  I started windows in safe mode and ran Malwarebyte Anti-Malware and McAfee and a Trojan horse has been deleted, but I still get the message on several applications when I try to open them.  I tried to set up another account, but when I go to the Panel, user accounts and family safety and try to select Add / delete user accounts, I can't seem to open.  When I click on it nothing happens.  Any ideas would be appreciated!

  Virginia lace:

  I finally solved the problem - I went in Safe Mode W/Networking and then on Windows Installer and Windows Installer of Module (and other things as well as unforunately that I remember).
  In any case - if worse comes to the worst, go to Mode safe mode w/network and pull up your Windows Services, then just turn each window / Microsoft service on which you can (set to start automatically) - orrat less start with Windows Installer Windows Installer of Module and see if that solved the problem.

• Windows backup error the service cannot be started, either because it is disabled or because it has not enabled 0 x 80070422

  I tried to understand this and have failed so far.

  Using the Control Panel, system and security, backup and recovery. Click the backup set,

  Pop up - select where you want to save your backup. I select the 4 TB drive that I just

  put in my system (and the recommended player). I click Next, and then select Allow me

  Choose and click Next. The next window - what you want to backup? Data files are already

  selected by default, and then I select the disc Local (c), include an image of disk system: EFI system

  (C) partition is already checked by default. Click on next, the next window - see your back to top

  settings, click on save settings and run the backup and that's what I have.

  The service cannot be started, either because it is disabled or because it has not enabled

  associated devices, (0 x 80070422

  I checked the services which apply to Windows backup and tried the auto configuration instead of

  Manual.

  I tried this search on the Internet and so far all I've found is not

  fixing the problem.

  Original title: set up backup Windows does not.

  Thank you for your help. I fixed the problem I had. It was caused by the settings in the

  Samsung magician optimization settings. Recently, I had put in a Samsung SSD EVO 850.

• BlackBerry cannot accept the connection via the Mobile network?

  Hi all, on Blackberry, I want to open a server socket to listen to a connection come from other devices.

  Here is my code:

  String url = "socket://:12345;deviceside=true";
  ServerSocketConnection scn = (ServerSocketConnection) Connector.open(url);
  SocketConnection sc = (SocketConnection) scn.acceptAndOpen();
  

  Mobile network on that BB is ok, but it cannot accept any connection.

  I also use its mobile phone network to connect to other servers, it works fine when it's the client socket.

  I tried with the Wifi network, and it works very well.

  String url = "socket://:12345;interface=wifi";
  ServerSocketConnection scn = (ServerSocketConnection) Connector.open(url);
  SocketConnection sc = (SocketConnection) scn.acceptAndOpen();
  

  In my view, Network Service Mobile prevented so that other devices connect to it, is it true?

  Please explain it to me, thank you very much!

  This approach only works for mobile connections, when the data are pushed to the device.  You cannot use it to connect to other phones directly.  Sorry

• The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422) attempt to run the Windows backup utility.

  I get this message every time I try to run the Windows backup utility.  All the services are rundning according to the instructions of Microsoft experts on the same issue.

  Original title: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422)

  Hi Charles,

  Welcome to the community Microsoft and thanks for posting the question. I'll certainly try and help you perform the backup.

  Until we start could you give us some more information?

  1. Since when are you facing the issue?

  2. you have any anti-virus installed on the computer program?

  3. What are the troubleshooting steps correct you have taken to correct the problem?

  4. are you aware of any changes made to the computer before the show?

  I suggest you to re check the service as long as this error usually occurs if one of the services required for the backup Windows for work is disabled or has not started.

  To check the services, click Start, in the Start Search bar type services , and then press enter.

  Please check that the following services are enabled:

  -"Remote Procedure Call" (RPCSS) must be active, Automatic.

  'COM + Event System"(System events) must beactivated en, Manuel.

  -'System Event Notification Service"(SENSE) must be active, Automatic.

  -"Volume Shadow Copy" (VSS) must beactivated en, Manuel.

  'Microsoft Software Shadow Copy provider' (SWPRV) must beactivated en, Manuel.

  Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

  I also suggest you to run a SFC scan (System File Checker). This will replace the corrupted Windows files.

  Here are a few articles on Windows backup.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope this information was helpful and let us know if you need assistance in the future. We will be happy to help you.

• The SSTP service cannot be started

  I am trying to share a connection, but cannot start service ICS - error 1068 - the dependency service or group was able to start. I followed the dependencies and the failing service was Manager of remote access connections. He is unable to start because the SSTP service cannot be started. When I try to manually start the SSTP Protocol it gives me a message "Socket Tunneling Protocol Secure Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"I changed the startup type to automatic, but nothing helped. My Windows is build 7600 with all updates applied. My computer configuration is C2Q 6600, Asus P5QL Pro, nV 9600GT, 2x2gb Apacer.

  EDIT: I followed this guide by removing dependence on SSTP but now it gives me error 87 - incorrect setting instead of 1068.

  So finally I solved my problem! I removed the RasMan (Remote Access Connection Manager) of the ICS service dependency and therefore probably broke support VPN and Dial-up . Here is the solution for those who have the same problem. Everything you do is your own responsibility!

  Press Windows key + R to open the Run dialog box. Type Regedit . Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ then right-click SharedAccess, and choose export . Save the file, so you have a backup if you want to restore the settings the easy way. Now open SharedAccess, double-click DependOnService , and remove the entry RasMan . Restart the computer and now ICS works perfectly. Make this "tweak" will probably break the VPN and Dial-up support!