Service error 49 - Turn Off, then on - LaserJet Pro 200 M276nw

Similar Questions

• RESOLVED - "49 error turn off then" HP LaserJet 400 M451dn

  Last week, I set up not one but 2 printers HP LaserJet 400 M451dn color for a client. It was 2 because I went first to the provider think there is a fault with the printer showed a 49 error randomly, but when I got exactly the same error on the 2nd and the same printer with a different provider, I thought that this may not be the case.

  What I found was - I set up the printer with a static IP address of 192.168.0.218 and excluded this address in the DHCP reservation list, so it is not assigned to another device. If I turned on the printer without the LAN cable connected the printer would say "Ready", but as soon as I connected the LAN cable, it is when that would throw a wobbly and appear "error 49 - Turn off, then on. I tried to reset the default printer without joy.

  THE FIX here IS (or should I say a work around) in the following order:

  (1) remove the LAN / network printer cables.

  (2) to reset the default printer.

  (3) remove the the 192.168.0.218 of the server DHCP reservation.

  (4) delete the IP 192.168.0.218 Server lease.

  (5) connect the LAN cable to the printer.

  (6) can get a new IP address from the printer. Using the same IP address again you go back to step 1 again.

  (7) that's all.

  For some reason, this printer does NOT set a static IP address and put a reserve on the server. Nuts!

  I installed several HP printers that I have in the course of the years and never encountered this problem. As I mentioned above, this is more than a solution to a genuine problem...

  Hope you guys find this post useful.

  I had exactly the same problem with a M451dn of 400 LaserJet, except in a working group with the router making DHCP, use a static address outside DHCP for 2 days and then pool this week had error 49, noticed that when the Lan cable has been disconnected, he seems to have stopped. Printer changed to use DHCP and it works again. (updating the firmware via USB had no effect)

• Not connected HP LaserJet Pro 200 M276nw

  Hello! I have the Setup:

  OS: Windows 7,.

  Router: TP-LINK TL-WDR4300

  Printer: HP LaserJet Pro 200 M276nw

  Freeware antivirus: Avira

  Firewall: Windows

  The computer connected to a network via ethernet. I installed the network printer (port TCP/IP wirewless, user good reading/writing, shared printer, 6 PLC) and printed all documets in 2013 of Word, it's ok.  After restart of the operating system, printer of the icon is grey and the State not connected. Please help me. Impression of uninstall and install now, Stoped ptrint service, coil clean, reserved IP address of the printer, it all no results.  Some other customers printed successfully via wireless to the printer.

  Hi @green_wanderer ,

  I see that you are having problems printing via the wired or wireless network after restarting the computer, the printer icon is grayed out and showing not connected, but can always print from other computers. I want to help you solve this problem.

  Is the installation of the printer wirelessly or through an Ethernet connection?

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  I would have to power cycle the router, the computer and the printer to see if it will help.

  Print a configuration page to check the firmware version and see if you have a valid IP address.

  If you have a valid IP address for the printer, then try and access the webserver shipped off to the printer, to see if the printer is still on the network. Type the IP address in the address bar of your web browser. (Internet Explorer)

  The IP address of the port on the computer can be different, if the printer has been assigned a new IP address of the afer by restarting the computer. You will need to create a new port, or run the Add Printer Wizard.

  Other computers that are still able to print could have the port configured to print if IP address changes.

  Print a configuration page to obtain the IPv4 address of the printer and the date of the firmware. Printing a Configuration report.

  The new Version is 20140919.  I've provided the URL if you have an old version of firmware update.

  HP LaserJet Pro 200 color MFP M276nw drivers.

  Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  If the problem persists, install a static IP address to see if it will help.

  Printer does not maintain a Wi - Fi connection. Proceed to Solution 3: printer of the assign a static IP address.

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  If you need help, let me know.

  Good day!
  Thank you.

• Unknown origin of black sheet pulled from a HP LaserJet Pro 200 M276nw

  We got a paper jam on our printer. One of our employees then pulled this black sheet of our HP LaserJet Pro 200 M276nw. This could really be an original work of this printer? Never seen such a thing before, mayby it's just a few packages that I have inside? The printer does work more (paper jam error). Thanks for helping out.

  

  Hi @VL14 ,

  I see by your post that you had a paper jam and the black sheet was removed from the HP LaserJet Pro 200 M276nw while removing the jammed paper. I would like to help.

  Yes, this part sounds like something to do with the material of printers. The printer would need to be repaired.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Have a great day!
  Thank you.

• LaserJet Pro 200 M276nw: lost password cannot reset the printer

  Several others have had the same problem with enter the menu of the printer, but lost the password. Help someone please this person (me) happens stupidville and reset or what should I do to get my printer go?

  Hello and welcome to the community of HP @MsBz,

  I understand that you have forgotten the administrative password for your HP LaserJet Pro 200 M276nw MFP color. I'll do it is happy to help you.

  To remove the password, you will need to perform a special reset. I'll message you private instructions you need to do. Note that reset will clear your wireless settings, then you may need to reconnect to your network when you have finished resetting. (It's like the printer out of box at that point).
   
  Let me know if it helps. If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• Mac OS x print duplex LaserJet Pro 200 M276nw

  I recently bought the HP LaserJet Pro 200 M276nw understand that I would be able to do manual duplex printing. However, after reviewing the instructions in the manual and try to understand through various blogs I can't always manually duplex.

  The instructions say that I'll be able to select manual duplex in the finishing menu under Print... However, there is no such menu for me on any program and the "double option" is grayed out. Please advise otherwise I might have to return the printer to find something that will work with printing recto verso or auto manual.

  Hi wegotjoy,

  I see by your post that you are unable to print double-sided on your Mac.

  Check the name of the driver that is installed by the printer. Airprint driver could be installed instead of the printer driver. (usually by default, Airprint)

  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen should display the name.

  If the name of the printer indicates Airprint, then it of the Apple drivers, remove it and add the name of the printer back in the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  

  

  Now try and print both sides.

  On the file menu, click print .

  Open the final menu and click the Manual Duplex or open the Manual Duplex

  menu.

  Click the Manual Duplex check box and select a binding option.

  Click the print button. Follow the instructions in the pop-up window that appears on the computer

  screen before the battery of exit in Tray 1 to print the second half.

  If the problem persists, then download and install the printer driver to see if that will solve the problem.

  Printer HP v.2.16.1 for OS X drivers.

  What operating system do you use? Mac OS X: how to find which Mac OS X Version is on my computer?

  What is the printer name show?

  Please provide detailed results if you're still having problems.

  Have a wonderful day!
  Thank you.

• Printers Multifunction LaserJet Pro 200 m276nw: memory is low. Job cancelled

  Hello

  I'm new to the forum.

  I have a problem with my Laserjet Pro 200 with a message "memory is low. Cancelled work. »

  I read the other posts with similar questions and tried to do a hard reset to turn on him for 30 second and turning point. The message always appears.

  I tried to update the firmware, but the printer says that no updates are.

  I use a Mac Mini running on 10.9.5 software. I tried to update the firmware via USB, what has not worked at all.

  How can I access the memory of the printer and clear the whole print or add memory to the printer?

  I need help!

  Hi @Med_Stud10 ,

  I read your post and see that you have found an "Out of memory" error when you try to print. I will definitely do my best to help you.

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (Laserjet M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver, you may need to click the drop-down list to select the printer name to add it in.

  Try to print again.

  I've provided the steps to set up the printer via the IP Protocol, if the problem persists, which regulated the other 'Out of memory' errors

  Print a Configuration page to get the IP address of the printer. M276n of MFP HP LaserJet Pro 200 color and M276nw MFP - print a Configuration report.

  Remove the printer in printers and Scanners.
  Click on the + button, select the IP Protocol on top, type the address IPv4 of the printer, select Jet Direct below and then apply.

  Try to print again.

  For the analysis, however, you can select the printer Hello.

  If you're still having problems, try the reset I will send you a private message.
  In the forum next to your handle name simply click on the envelope to see.

  Please let me know the results.

  Good day!
  Thank you.

• LaserJet Pro 200 M276NW color does not print more than once; application freezes

  Hello.  I had a problem with Laserjet Pro 200 color M276NW my family when printing from my desktop Windows 7 (64 bit) for quite awhile.  The first time I print a document after starting my computer, it prints the entire document very well.  However, the print jobs will simply freeze the program that sent them (for example Outlook, Opera, etc.) on a screen ' print the page of.  Also, I can't print a test page in Windows when the first task is completed.  I finally realized that it probably has something to do with the spooler service in Windows, or in the print queue.  When I look in the queue after printing the first document, it shows that the paper in it, but the new job that froze my app does not appear.  After I restarted my computer, I can print a document more before I have to restart again.

  The printer is networked on our home network; It is not connected to any computer via USB, and in my opinion, is the connection to the ethernet router.  My computer is connected to our network via a wireless connection.  I tried to restart the spooler, enter the IP address of the printer in my web browser (which works fine and shows the right page), and everything else listed in the Help article.  Try to open the printer properties in devices and printers does nothing.

  To complicate, the printer won't even print the first work since I got on my computer and I tried this today.  Also, I got exactly the same problem on my laptop, which also used Windows 7 and connected to our home network wireless. The laptop now has Linux on it instead. I tested several printing on it earlier and they print very well.

  My father, who has a wired connection to the router, told me that it is able to print more than one job very well.  I just had my brother (who also has a wired connection) print two different documents, and it has worked very well.  This leads me to believe that there is somehow something to do with the Wi - Fi computer assigned to the router, in combination with Windows 7, apparently.

  Moon Raker, starting with the sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.

• Color LaserJet pro 200 M276nw MFP - Scan configuration and installation on Mac Yosemite

  Hi all

  I just bought a new LaserJet pro 200 color MFP M276nw and I am trying (for 4 days) to coorectly install it.

  My goal would be to use it via the wifi connection and I put it correctly by the façade.

  When I try to install the printer on wifi, I can install the printer driver, but I can't find the driver for scanning.

  I tried to connect by ethernet and the system to emphasize a multifunction scanner and the printer driver. If use them, it works correctly.

  Whenever I go out the lan cable for use in wifi it lose the scan functions.

  What I am doing wrong?

  Thank you

  Gianluigi

  Hi @gianluigi1982 ,

  I see that you have problems with scanning via the wireless network, but you can scan through an Ethernet connection.

  I would like to help.

  Do you have what drivers installed the printer? (Apple update or the 10.9 download drivers)

  I checked our laboratory with 10.10 installed on this computer and I was able to browse for printers and Scanners on the wireless network.

  Check the version of the driver installed.

  Go to the Apple preferences system, printers, and Scanners, highlight the Laserjet printers, click the print tab on the right side of the window, and select the Options and supplies.
  Under the general tab it will give the list the version of the driver.
  19.9 is one on the lab.

  Which driver you have show?

  Check the name of the driver that is installed by the printer. Make sure that it shows just the name of the printer.
  Click on the Apple menu, click System Preferences. Click on Printers & Scanners, highlight the name of the printer on the left side and right side of the screen it should show the name of the printer. (MFP Laserjet Pro 200 M276)

  If the full name of the printer is not correctly, delete and add the printer name back from the list. Click on the sign - to remove the driver and then click on the + sign to add the driver might have to drop-down list to select the name of the printer to add a click.

  In the printers and Scanners window, highlight the printer on the left side, to the right of the window, you should have a print/scan tab, click Scan, and then open Scanners and test scanning. If you do not have the scan tab, let me know.

  

  Have you added the printer as your Hello or via the IP protocol? (cannot scan through the IP Protocol)

  You use the automatic IP address or your own static IP address?

  Here is some information for scanning in OS X v10.10 Yosemite without software HP.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• Color LaserJet pro 200 M276nw: color LaserJet pro 200 MFP M276nw network installation problems

  Set up the printer correctly. Has chosen to use the Wifi option. Wireless computers are able to print to it without problem. Went do my first scan, and it tells me to set up printing to the network drive. So I will do this, and the software HP on the host computer (with USB connection) told me that it can configure not unless that is the printer is connected to a network.

  Obviouslly, it is connected to a network...

  Then disabled Wifi. Is turned off the printer. It connected to the router. Running. And still get the error message. Besides, cannot be found in the menu of the printer (on printer) where I can "setup" a wired connection.

  I'm a nerd of the computer, but for some reason i gots the mute today. Some advice would be appreciated - about the printer that is.

  Oh. You say to add the printer a network rather than USB printer. DOH. So simple. Thank you!!!

• HP5550 68.0 "permanent storage full" followed by "49.4C02 error" "keep turning off & then on."

  End users reported a 49.4C02 error.  They had cycled power on the printer error code and the error code persists.

  I went to the printer to see what was going on.

  I noticed that a few seconds until the 49.4C02 error appeared on the screen of the printer, there was

  a 68,0 error "permanent storage full".

  I tried a cold reboot, but it did not help.

  Could not watch all print jobs in the print as I didn't know what was the address of the network printer.

  The display was frozen on the 49.4c02 error.

  I was unable to print the configuration page to find the IP address / number, so I couldn't determine the printer to look at.

  I found a solution.

  I examined the service manual and found an article on how to initialize the hard disk.

  I expect that this might help as I was getting a storage permanent error 68,0 full, a few seconds before the 49.4C02 error appeared.

  In all cases, it couldn't hurt to try.

  So I power cycle the printer.

  The count of memory at startup, I pressed the MENU button and held it until the 3 LIGHTS all light up.

  I then released the button MENU. I hit the button the arrow (return). The screen of the printer showed a

  INITIALIZE the DISK on the screen.

  I pushed the button tick to accept the initialization process.

  The screen displayed/hidden between a few different views, then on the READY screen appeared.

  Printing all seemed to have disappeared, but at least the printer is online and functional again.

  Not sure how happy the end user who has had a print job in printing, but I was happy to have the operational printer again.

• HP LaserJet Pro 200 M276nw working condition and energy consumption.

  So that the energy state of the printer and its energy consumption, I wanted confirmation of the information:
  1) operation (print, scan,...)-on the energy consumption of 310 to 315 watts
  2) sleep (the printer is ready to accept any work, even wifi, before any print offers email ePrint) - power consumption about 13 watts
  3) idle (done printer does NOT work on wifi, NOT to print the ePrint e-mail offers, wake up within the parameters of the function of AUTO ON-OFF AUTO)-about consumption 6.5 watts
  4) off to switch manually (no operation) - on the energy consumption of 0.2 Watt
  All of this is correct?
  Thank you

  Hi fabris66,

  If I understand correctly you want to know if the printer must be in mode standby in order to receive an email using eprint.

  Yes, the printer must be in standby mode or on and connected to your home network.

  Hope that helps.

• Color LaserJet Pro 200 M276nw: color Laserjet Pro 200 M276nw install problems

  My printer seemed intemitently impression not so I decided to uninstall and reinstall the drivers.  Everything was going well until the installation process decided to scan the network to the printer.  My computer is on the network and able to conencto to the internet and printing is on the network - wireless to the printer status page says and sees the router.  Not sure why he does not see the installer.

  I never could get the recommended pilot plant to work (in the same after following all steps).  Instead, I downloaded the "base" drivers on the site.  Then, I went in adding printers (in Windows features) and manually punched the AutoRun.inf.  Fully managed Windows from there.

• LaserJet Pro 200 M276nw: Changing the print settings

  I want to print in black only.  When the print dialog box appears, the ONLY option is standard. There is no color/quality Option or the Option advanced as indicated in the manual.  There is no manual control.

  When I open system preferences, as suggested, I get the screen which gives me once again NO parameters.

  

  Hello
  Follow the steps below to print using black ink only, these are accessible from the print itself, dialog not print & Fax:
  
  1. from the application used to print, click the file menu and select print.  The print window is displayed.
  NOTE: The print window might be minimized: click the blue triangle next to the product model to see all available parameters.
  
  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.
  
  3. Select Type/quality paper in the menu dropdown.
  
  4. you may need to click the triangle next to color Options of spending parameters, you will find the levels of gray or black in this dialog box.
  
  You can save the settings for later use by clicking preset > save current settings as preset... a used preset by default remains until you select any other preset.

  Shlomi

• LaserJet Pro 200 M276nw: Scans can be recovered from the internal memory to a Laserjet Pro 200 M276nw?

  Hello.

  I wonder if a tech-savvy person would be able to recover scans of the internal memory of the all-in-one M276nw?

  As in, is it possible that confidential info of the analyses could be recovered by the unit once it has been sold, recycled, etc.?  I wouldn't see my Bank and that operations that no info there...

  I guess it's not as simple as pushing "get it back" in a menu, but someone with a material and ill intentions would be able to sort?

  If it is possible, how do I clear it?

  Thank you very much

  Hi @e9999 ,

  I see you want to erase the internal memory of the printer. I can help you.

  I can send you this information in a private message.
  In the forum next to your handle name simply click on the envelope to see.

  Good day!
  Thank you.