service.exe updating OR deleting of the registry

Similar Questions

• KB973687 - msxml3.dll msxml6.dll - services.exe uses excessive virtual memory, the performance impact on the first logon after restart

  Since the installation of fix KB973687, I had several SP2 and SP3 systems exhibit behavior that makes them unusable until after the first logon is completed, which can take up to 20 minutes.   I've identified the patch (KB973687) and DLLs, that it will update the origin of the problem, but uninstalling the patch does NOT return to normal operation.

  I need to understand how to upgrade these systems WindowsXP SP2 and SP3 to restore normal operation, reinstalling Windows, programs, and settings is an expensive solution.

  The performance problem is caused by services.exe slowly consumes about 1.5 GB of virtual memory, and then slowly releasing.  This seems to be triggered by the first logon after restart, this connection is very slow, the screen is blank for most of it, there might be failures of allocation memory during logon.  Once complete this opening of session and memory usage returns to normal levels, recording and return to work normally as do other operations until the system is restarted.

  Spent a lot of time working with SysInternals Process Explorer, trying to find what specific service might be involved, lightweight system for bare essential services with no luck.

  KB973687 seems to offer only two files msxml3.dll and msxml6.dll.  Uninstalling this patch, resettlement V3 and V6 of the XML parser fail to restore normal operation.

  Not all systems seem to have place still restrict the differences.  Systems that are appear to be the oldest, with Windows XP has been installed for at least a year, installed Microsoft Office and Adobe Acrobat.

  Looking for these forums and the Internet, I believe that many have encountered this problem, but have not is it this level of analysis, seem most attribute it to a virus, I see several start explorer.exe manually, I didn't know all the alternatives before reinstalling Windows.

  Found the solution, the following has been fixed in System Cleaner of Comodo 2.2.129172.4:

  "For some strange reason, after changing some settings of the system with the CSC LastGood.tmp Directoy began to constantly be read from my hard drive. This would occur up to about 90 to 99% of my memory was used and then stopped, begin to free the memory, and the system began to slowly to function normally.
  I used the process explore from sysinternals to help diagnose the problem with any process other than services.exe using memory.

  I used sysinterals filemonitor to see LastGood.tmp directory has been read repeatedly.
  After you have uninstalled CSC the problem has been resolved. »

  Even with the effort to find the solution, it was better to reinstall.  Hope this solution helps others.

• Symantec deleted from the registry and now my often freezing computer

  I recently deleted my Vista registry Symantec because the uninstall feature wouldn't let me uninstall it. After rebooting my computer, it worked fine... for 5 minutes. Within an hour, he froze 4 times.  How can I stop my computer from freezing?

  You can also use the restoration of the system to a point before you uninstalled Norton Product (especially if you have changed the registry).  Do you know when this problem started (when you uninstalled it)?  Try a system restore to a point in time before the problem started (give him room to manoeuvre a little if you can).  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  THEN use the Norton removal tool posted above by Michael Murphy to uninstall Norton product correctly.  I suspect that this works very well and you won't have any trouble you are experiencing now.  This can solve the problem without causing other problems or necessary steps (such as the need to do a scan CFS or more, a repair/upgrade re-installation of the system).  Of course, you can run the SFC program if you want to check your file system corrupt system and perhaps correct if any exist - it's a good thing to do from time to time.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• [SOLVED] Possible to allow updates from Microsoft via the registry, GPO, separate download?

  It is possible to activate Microsoft Updates via Group Policy, key registry or by download & install a separate package to "flip the switch"?

  To clarify, I don't know what allows "Automatic Updates".  By default, systems get updates to Windows, but I want to get Microsoft Updates to get updates for all Microsoft applications (Microsoft Office, Visio, Project etc.).

  UPDATE: This has been resolved.  The data further solutions below works.  I'll just all point to this excellent article from Microsoft:

  Opt-In for Microsoft Update: https://msdn.microsoft.com/en-us/library/windows/desktop/aa826676(v=vs.85).aspx

  Not sure if this helps-

  Windows Server 2008, Vista, Windows XP & Windows 2000
  How to configure automatic updates by using Group Policy or of registry settings
  http://support.Microsoft.com/kb/328010 TaurArian [MVP] 2005-2010 - Update Services

• Service pack update is stuck in the loop: 3 3 100%

  Hello.  My wife's cell phone is having this problem after trying to install Service Pack 1 for its Vista Home Premium.
  He joined 'Update 3 3 100% ', then he sits for a while before restarting the whole routine - again and again.  We tried to turn it off, and he took over just after turn it on again.  There is no error code.  Any help would be greatly appreciated.

  Hi Dave,.

  Thanks for posting on the Microsoft answers Forums

  Press and hold the power button until your pc is turned off completely.
  then while the computer is turn on before it gets to the loading windows screen, press F8 key several times until you see
  These options
  (With the arrow keys and down, choose "Last known good configuration" then press enter)
  Safe mode
  Safe mode (with networking)
  Last known good configuration<>
  .
  .
  .
  If this does not work, restart your computer. Perform the same steps, but rather start in SafeMode with network. When you're on the desktop, try to do windows updates and stop and start again. After the updates installed successfully restart computer and boot up normally this time.
  When the computer comes back again to run updates again.

  Please post back and let us know if this information was useful or if you are still needing help.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot remove sunbelt software program Files.It is deleted from the registry and ADD and remove the windows xp program

  Windows xp sp 3 home

  I tried everything to fix this. Even Microsoft Fix It can not remove this file. In Program Files, I right-click a message and Sunbelt Software (SBAMSvc.exe - VIPRE antivirus) wrote:

  Cannot delete: the directory is not empty.

  When I removed my PC Vipre I fallow the steps of the company. It is a business that needs to protect us, but for greed, it becomes a VIRUS.

  Thank you

  Ettore

  Hello

  I suggest you to download Microsoft Safety Scanner, scan your computer for viruses and malware then check how it works.

  You can download Microsoft Safety Scanner from the link "scan to Microsoft Security.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Identify the field updated or deleted in the Contacts.

  Hi all

  I have a question.

  I write PIMListListener for contacts.

  is it possible to identify the updted or remove fields in contacts using pimlements of PIMListListener?

  Thanks in advance.

  Sorry for my English.

  As far as I know, there are no specific listener that will tell you what specific item field has been updated. You must write your own logic to him.

  Will implementation of PIMListListene, you know what PIMItem has been added, deleted, or updated. In the case of update, this listening port will also give you the old PIMItem object to the new object PIMItem.

  itemAdded (PointPIMItem )

  itemRemoved (PointPIMItem )

  itemUpdated (PIMItem oldItem, PIMItem newItem)

  You can get the value of fields using object PIMItem methods and compare those values for the required information updattion. It's your own logic.

  If someone can suggest a better approach, please go ahead.

  ~ Brigitte

  www.Impetus.com

• I downloaded a Vista Service pack update. Upon restart, the computer crashes upward on the screen:! 0xc0190036! 2348/48738 (fusion.d11)

  I was invited by what looked like a legitimate update notification.  After update, it asked me to restart the computer.  The computer hangs above the screen.  I tried Start Up repair without result.

  Alton

  Hi AltonChewning,

  Please see the following thread similar with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Vista-SP2-installation-error-loop-x64/a1234293-0fc5-4688-8e2a-9229b3ebe365?page=1

  I hope this helps!

• Windows Vista Home Premium 32 Installer is missing from the registry and Services

  HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/MSIServer does not appear in the registry.  Windows Installer does not appear in the Services.  Cannot get Windows install to work on all the programs 'access forbidden '.  Looks like a corrupted virus probably register, but try to download the 4.5 MS update does not install because it tells me incorrect version.  Running Vista Home Premium 32.  I swear that MS made this just for you to buy their next major release.  So far, I tried almost everything on the line.  Some how I may be able to restore the registry and Setup key.

  Assuming that System Mechanic is or has been install...

  System Mechanic is your troublemaker & you have lots of company! [1]

  See my colleague Maurice RESPONSE message in this thread: http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  If still no joy, contact System Mechanic (iolo.com) supported for assistance-, they are well aware of the problem posed their candidacy.

  TIP: If you think that more never your registry database needs to be cleaned, repaired, boosted, to the point, healed, twisted, fixed, magnified, "swept" or optimized (and even more to convince that it is not), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  =====================================================================
  [1]

• Flash Pro update CS6 grey menu + AAM fail, deleted by the Admin - Win7-64

  Hello

  I want to update Flash Pro Cs6 (Win7 64 bit PC) to Update2.

  However, the menu help > updates is gray.

  The hotfix installer UPDATE2 AMM says 'updates could not be applied. "Contact your system admin updates were deleted by the Admin.

  before you begin.

  This seems to point to a question of privilege, but I tried:

  run Flash as long as administrator, run the update as an administrator, install flash logged on as admin and updater logged on as admin,

  without a little luck...

  This is the Setup summary log:

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 0 error (s), 4 warning (s)

  WARNING: DS013: Payload {7EABC54B-02C3-4DA1-9EB4-974CE7414066} AdobeHelp 3.4.0.0 is already installed and the load of the session {D38116C8-C472-4BB0-AD6F-0C1DD1320D1D} AdobeHelp 4.0.0.0 has no connection to upgrade/conflict with it.

  WARNING: DS013: Payload {1A1E5FF9-D0FD-42A3-8E18-E5E7E95E1AB4} DynamiclinkSupport 5.5.0.0 is already installed and the load of the session {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no connection to upgrade/conflict with it.

  WARNING: DS013: Payload {A8798E04-96FF-4564-9157-0D4C89CB794C} DynamiclinkSupport 5.0.0.0 is already installed and the load of the session {DE88AA40-6766-43D3-A755-8FC374B3D2C3} DynamiclinkSupport 6.0.0.0 has no connection to upgrade/conflict with it.

  WARNING: DS013: checking reports of upgrade/conflict payloads: failed with code 1

  See you soon,.

  F.

  PS:

  Sorry for the post of this:http://forums.adobe.com/message/4793645#4793645

  Just noticed, this is the forum dedicated to installation problems.

  Thank you, Jeff.

  That did the trick:

  http://forums.Adobe.com/message/3067236

  See you soon,.

  F.

• ORA error-40501 impossible Record of reserve for the update or delete.

  I'm testing a new program and get ORA-40501 error-could not reserve Record to update or Delete.
  The database prevents users both a motion trigger and a ' clause ' a query data source, type a»»
  the block property. The query itself works fine, I get the error only when I leave the field that I am trying to update.
  I don't know if this is related, but on a multi byte field, touch I new characters are all displayed one after the other
  in the same byte 1 of the form.
  Update/deletion is not appropriate when you use a prior query?
  I normally don't use queries before, but in this particular program, records that I selected are based on several cursors
  as well as some parameters entered in a previous block, and that's the only way I could think to do. I guess
  It was not a way to use the query data Source Type = Table and be able to make the selection of records I need.
  Thank you
  Sandy

  Since you use "clause of" query as a data source, you will need to manage the insertion, update, lock and delete operations on this datablock. If you need to implement on Insertion, on-Update, on-Lock and the removal of the triggers for that to happen.

  I don't know the query that you put in the data source contains a single table or multiple tables. If you have a single table so better to use as a name of the source table and the data table as the data source name. If it contains more than one table, then you must handle transactions on-... Triggers.

  If you don't want to do all the DML operations on this block then.

  In the trigger lock, simply add NULL;

  I hope this helps.

  Kind regards
  Annick...

• CPU at 100% use, services.exe using 50 to 70% +.

  I've upgraded from Vista to Win 7 on day of release and had no problems until recently. In recent days, my CPU usage will boost 100% at irregular intervals and stay there for a long period of time. When I check the Task Manager and view the processes from all users, services.exe is fluctuating, anywhere from the low 50 to 70% in low use. When the computer works normally, services.exe is close to the high single digit. I uninstalled and programs that I installed immediately before the occurrence of the problem (and it happens again as I type this) and I ran full virus/malware using Microsoft Security Essentials scans and the scanner online ESET. Both are some adware stuff and not withdrawn, but no virus or malware problems. This happened for several days and made my computer almost unusable, and I'm in a fix what to do or where to look next. I hate for resettlement because the original installation was so recent, if all the tips I can try to avoid again would be great. Thank you!

  Expand the tree until you see other things, not only ntdll.dll! _RtlUserThreadStart.

  NDIS.sys means, you should try to update your drivers LAN (W). "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot update or delete via Ethernet.

  Originally, I was connected to ReadNAS storage via a wireless connection. It was the way to slow, I mean a few hours to download a few hundreds of slow photos, completely unsatisfactory. So, we have connected my computer directly to the router using an Ethernet cable.

  I've found that I CAN update and delete on the ReadyNAS when the EHERNET CABLE IS NOT PLUGGED in, in other words, I'm connected wireless.

  When the ETHERNET CABLE IN PLUGGED, I can write only the ReadyNAS, I can't edit or remove the device. I get a file by user error.

  Hello

  Follow the steps provided by Divya R and check:

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/b8cf6822-f615-44a1-840B-5959ca4a769b

  It will be useful.

• My system32\services.exe file is infected by Trojan Patched_c.lyt. I can't delete the file.

  Infected System32\Services

  My system32\services.exe file is infected by Trojan Patched_c.lyt.  I can't delete the file, so I can get a clean version and overwrite it?

  * This security software you have running on your system?

  * Please download the free version of Malwarebytes.

  Update immediately.

  Do a full scan of the system

  Let us know the results at the end.

  http://www.Malwarebytes.org/products/malwarebytes_free

  * Download the file reported as infected to VirusTotal for confirmation.

  https://www.VirusTotal.com/

• Cannot open the com files and executable file in the Original Windows Vista Software activated after updates to the registry and cleaning, error message and all the setup.exe files has been disabled, why?

  I use Vista Ultimate SP2 preloaded o/s and windows is activated with a genuine problems with executable files with product of what ID 89580-OEM-7332132-00031 on PC, the problem happens when I'm uninstalling some registry tools, the error message I got was 'impossible to connect to the microsoft client group policy server' and whenever I try to run the executable file .exe or .com I get error messages "the windows don't. not find the environment option that was entered path c:\windows\system32\msconfig.exe for example. What is your solution if all the drivers I downloaded from microsoft Update site and support Web is unexecutable because of registry files missing that causes all the executable files and com files to display error messages when clicked. What was missing in the original windows registry files after running the tool registry optimizer? What was missing in my windows vista original? Need help 4th level or windows file recovery software onwer.

  I was able to surf the internet, able to do facebooking, capable of voip webcam and chat however installation and admin work on operating system software has been disabled due to lack of the registry files all the executable files was disabled after a registry cleaning registry optimizer and all the setup.exe has been disabled when I run saying them I don't have permission to run setup.exe because I like not connected to the microsoft Group Policy Server, but it is an original windows software, I can download files from the microsoft Web site and save on my drive hard but cannot run the executable installation files, which was lacking in system files that stopped all the executable files to run, except the internet broadband. Need help 4th level or windows file recovery software onwer

  Hello

  Method 1:

  I suggest you to do a scan of the SFC. File system (CFS) Auditor verifies that all Windows 7 system files are where they should be as they are by default and not corrupted, changed or damaged.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929833

  Method 2:

  Create a new account user has administrator rights and check if you are able to install applications or not. Follow the steps mentioned in the article below.

  Create a user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  Method 3:

  I suggest you do a system restore and check. See the article mentioned below

  System Restore: frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  What is system restore?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.