Service of Intel RST (Rapid storage technology) does not work. Windows 7.

Similar Questions

• Tecra Z50 - A - Intel Rapid Storage Technology does not

  Dear Sir

  We bought a lot of laptops Toshiba Tecra Z50 - A with a hybrid HDD (with SSD cache).

  The exact model:
  TECRA Z50 - A
  PT544E-00D01TBT

  We staged and repartition laptops via SCCM.
  However, when you install all the drivers and the Intel Rapid Storage Technology software, I see that only rge WHAT HDD is used and no partition SSD with the Intel RST.

  How we enable this?
  The problem is that the performance is incredibly bad.
  Laptops are very slow, even if the specifications are good:
  CPU i5-4200U
  8 GB RAM
  Windows 7 x 64

  No idea how to turn this Intel RST?
  In the BIOS I find no option for RAID, as must be enabled for the RST to work.

  Thank you

  To be honest I n don't know what you mean exactly the RAID mode. There is no RAID mode.
  The laptop was equipped with a 500 GB SATA HDD HYBRID.

  The part of the HARD drive is used for writing, the SSD part for the reading of the data.
  The performance of SSHD can be placed between a HDD and SSD, but it s significantly slower than an SSD.

  If you have already installed the - Intel Rapid Storage Manager driver, then the service should work

  In the case where it does not run in the background, try to install the latest Intel RST page of Intel driver.

• Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve

  Windows theme does not work (Windows Ultimate), there is no desktop image and photo does not evolve, is one knows how to fix this problem

  Hello

  Your Windows passes genuine validation? If your activation session has expired and that windows did not pass the validation, it will not show any visual effect such as background noise, themes etc. It will only show a black screen and at the bottom right of the screen you can see attention.
  Cihan

• I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  See download Acrobat 7 and CS2

• Satellite A100 (PSAA9L) - the does not work Windows XP it has close

  Hello
  I recently put a satellite A100 (PSAA9L) and when I try to turn off the laptop. It shows the closing of the screen but does not work, stop.

  Please tell me what to do with this problem.

  Thank you!!!

  Hello

  There must be something wrong with the OS files or registry entries.
  Maybe some background process cannot be closed and therefore the shutdown process does not
  Microsoft has released a useful document about solve the shutdown problems in Windows XP.

  Please check this box. Maybe this helps:
  Resources to solve the shutdown problems in Windows XP
  http://support.Microsoft.com/kb/308029

• Z500 keyboard does not work windows 8.1

  Hi, my problem is that all of a sudden the keyboard does not work in windows. It works by entering the password, after that it does not work. knowing that yesterday it was working properly.

  any help?

  Thanks in advance

  I did a system restore and it solved my problem.
  Thank you for your care ^_^

• HP 15 laptop: wifi does not work windows 8.1

  I have Windows installed pro 8.1. I was using wifi on this laptop, it worked fine. However, recently, I see that the Wifi does not work although he shows me the SSID of my network I used to use and also the SSID of the networks of neighbors. (It means that the wifi on laptop chip is capable of scanning the wifi signals and so it works). The same router from which all other Mobile tablets, my home laptop work are able to connect to the wifi network. Only on this laptop I am facing this problem. What may be a solution or what I should try. I tried the steps listed here http://www.fixedbyvonnie.com/2013/10/how-to-fix-limited-or-no-connectivity-wi-fi-issues-in-windows-8...

  Although I have not changed the default settings only steps above on blog, I tried to solve the problem. However, it did not work. Also keys function + F12 on laptop has no effect. The light on the F12 key is always on. However, it is possible to toggle the wifi in the bar of Windows 8.1 charms.

  What should I check?

  I bought an external USB wifi device that solved the problem.  The card wifi on laptop works well, but for some unknown reason, he is not able to connect to home wifi router. http://www.snapdeal.com/product/leoxsys-150-Mbps-Nano-WiFi/1179610?utm_source=earth_feed&utm_campaign=TopPerformersPLAScaling3000&utm_medium=CPC&utm_content=1179610&utm_term=, & campaignid = 350311165 & 28373951005 = adgroupid & adposition = 1o1 & network = g & device = c & targetid = pla-55251503741

• Error 1053 and error 1068, I have no sound, No Security, Windows Update does not work, Windows Media Player doesn't work, restore the system no. said Volume Shadow Copy 0 x 81000202, please someone help me, Windows Vista Home Premium 32-bit

  My system does not work properly.  Something has closed most of my Windows programs.  How it happened and why I don't know.  I can not do that more with Microsoft.  First it was XP, Vista now.  It's like as soon as Windows 7 is out Microsoft has launched programs to destroy Windows Vista.  I have to deal with that now.  Please if anyone sees this and can help, please help me!

  Hello eco123eco,

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select run as administrator.

  2. click on continue or provide credentials admin if prompted.

  3. in the command prompt window type the following, sfc/scannow (yes he's a space after sfc), and then press ENTER. This analysis may take some time to complete.

  Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Microsoft MultiMedia 1.1 wireless keyboard does not work - Windows 7 64 bit

  Keyboard does not work.  Does not enter any data.  Battery is good, the wireless signal is good.  Tested on another computer and does not work there either.  Tried to uninstall, reinstall and checked for driver updates. Original installation disk is incompatible with Windows 7.  Message says device is working, but the keyboard is "dead."

  Appreciate the suggestions, pls.  TX

  Not a good sign that it does not work on another computer. Go to control panel > devices and printers. If the keyboard doesn't appear as an installed device, think of it as dead and buried.

  Windows identifies devices of small IC boards inside the devices and guess they are ok. Windows cannot do is determine if the keyboard membrane makes contact with the small IC Board...

• AutoPlay does not work, Windows 7 Ultimate 64-bit

  I have Windows 7 Ultimate 64 bit on my gateway SX 2800, AutoPlay does not work with anything, DVDs, CDs, thumb drives, nothing. When I got my PC it had Vista Home Premium 64-bit and AutoPlay works great, now that I've upgraded to Win7 it doesn't. I went through the steps in Control Panel to configure automatic execution, but nothing helped. Help, please, thank you, Ted.

  See this link-

  http://Windows.Microsoft.com/en-in/Windows7/Troubleshoot-AutoPlay-problems

  If she does nothing then run SFC

  1. open an elevated command prompt.

  2. in the elevated command prompt, type sfc/scannow, and then press enter

  _____________________________________________________________________________________________________________

  Telloin

• Sound does not work Windows 8 HP ENVY Phoenix 810 PC

  Original title: HP ENVY Phoenix PC 810

  I just put my new computer today and there is no sound. It does not appear to be pregnant anywhere on the screen. Are supposed to be? I also tried to plug the headphones into the top port of the Tower, and still there is no sound! Help, please. I paid a computer person to install this feature for me, now I'm worried, I'll have to return this machine and be the money that I paid for the help in setting this up.

  Hello

  Please contact Microsoft Community.

  Just a few questions first, to get a clear picture of the issue;

  1. Do you see a "Red X" mark on the volume icon in "Notification tray"?
  2. Did you make any changes after you set up your PC?

  This problem may occur if one or more are true.

  • Hardware failure.
  • Audio drivers are not installed or disabled.

  I suggest you follow the method below and check if it helps.

  Method 1: Convenience store;

  1. Press Windows Logo + 'W '.
  2. In "Find", type "Troubleshooting".
  3. On the left, click "Show all" and in the list, click on 'Hardware and devices' to run the troubleshooter.

  Important: After you run the troubleshooter, it is recommended to restart the computer to apply the changes.

  Note: After restarting, try to listen to music and check if the issue still persists. If audio does not work, you will be invited to an "error" or "error Code". I suggest you to make note and respond to us.

  Meet us with the required information, then we can help you further.

• My internal Webcam does not work (Windows 8 / PB Easynote) * help *.

  I have a TE Packard Bell's Easynote running on Windows 8. It has built in webcam (a generic unit named WeCam HD). But right out of the box, whenever I run an application that needs to use the webcam, it says "no device detected Webcam. If you are using a built-in camera please turn on"or other similar term. There is absolutely nothing in the user guide/documentation to explain how to do this.

  I went a little further and checked the Device Manager and there are the most recent drivers for this device all present and correct. And in some ways to make worse it, most of the time it doesn't work and it just worked last week. My son took a load of pictures of himself using the webcam internal to give me a new nice screen saver (red led light has been released top the camera was on and work) so I know that he has the opportunity to work. It's not fair. We tried to retrace his steps I guess all that I need is a key command to move the camera power switch (there is no way to access the device that I can find in windows 8). I tried fn & the keys function, Alt or Alt GR and the function keys, the windows key and all the keyboard shortcuts I know, but nothing seems to work. Please is - can someone help or give advice. It drives me crazy

  I think that I finally discovered it. Well, it seems to be correct.

  When you launch the video camera app or app camera for the first time as long as the laptop screen is far enough back the laptop recognizes the webcam and it turns on automatically,

  If you run the application with the screen in an 'L' (side view), then it does not work, it does not recognize the webcam. But if tilt you the screen a bit more far back it seems to work.

  Crazy. But maybe theres an internal sensor or something. Well now worked two times...

  unless it's just a loss connection internal as Douglas says. I'll just keep my fingers crossed that this new crazy method continues to work. If that's all, that's when I'll eat my hat. I've seriously been pulling my hair out over this. Looking at / installation of hardware drivers. Research and try millions of combinations of different keys. Trawling through information about Windows 8 & webcams. And it turns out that, if all goes well, it's just something simple like this...

  But thanks for your colleagues at the time. Appreciated.

• Help please - Flash player does not work, windows 7

  Hello

  My flash drive has stopped working.  I can download the latest version 10.2.152.32 and it says that it has installed successfully.  When I try to view a web page, it says no more I need the latest version and brings back me to the last updated successfully, but still does not work or it was just an empty box with a red x in the upper left.

  I can not find it flash drive by searching for it on my computer.  I uninstalled and reinstalled several times and it still does not work.

  I tried to research to manage addons but it is not listed, only shockwave active x that is enabled.

  I have no idea what to do next.  I am using windows 7 32 bit.

  Thanks in advance.

  Paul.

  Hi, check your notifications by e-mail that I sent you a message earlier today.

  eidnolb

• Intel Rapid Storage Mgr does not see my SATA III Drives

  I was wondering if my BIOS settings are wrong. I have two SATA III (6 GB/s) plugged into the appropriate Sockets. Motherboard ASUS P8P67 B3. Readers appear in Explorer but in the Intel Rapid Storage Mgr, ports are empty. How will I know that I get max performance of these drives?

  Leave the controller in raid mode. Provides the same functionality as AHCI and you can change to raid later if you choose.

  Eric

  ADK

• HP Envy 15-j139TX: the BIOS using external storage recovery does not work.

  My HP Envy 15-j139TX got stuck (frozen) and I force closure by long pressing the power button. I tried to start by pressing the power button, it shows a black screen (display off) and the capslock continues to Flash.

  I did research on the problem and discovered that the issue was "the BIOS corruption failure" according to the information on the link below:

  http://support.HP.com/us-en/document/c01732674/

  I tried to recover the BIOS using an external storage device by following the instructions at the link below:

  http://support.HP.com/us-en/document/c02693833

  But it did not work. The lights keep flashing. I have my files b.SC. thesis on the computer and their need for pronto. (If not my life is pretty well made)

  I also couldn't find the files for version 10 of Windows (64-bit) to my laptop, so I tried with one I downloaded from another site and I got a BIOS of Windows 8.1 HP site.

  Is there anyway I can fix it soon or get my files as soon as possible. Help, please!

  Have you ever updated the BIOS before?

  If you have, you should be able to recover the BIOS using the Windows key + key B method.

  All holding the key Windows + B button down, press the power button and wait to see if the laptop responds with a message of recovery of the BIOS on screen.

  As my wife continued his mastery, I insisted on his recording of his files periodically to our home network NAS.

  You can remove the hard drive and connect it to a desktop computer to get the files from it. You can connect the hard drive to a USB to sata cable to connect it to a laptop.   Instructions to access the disk by opening the back door are on page 42 of the maintenance and service guide. The hard drive is part replaceable by the user, so you don't have to worry about voiding the warranty.

  http://h10032.www1.HP.com/CTG/manual/c03943414

  Your notebook is new enough to have the recovery key enter BIOS update available. Use the F.65 version in the Windows 8.1 driver download section. the softpaq is at the following ADDRESS.

  http://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69886.exe

  You will need at least 256 MB usb key to create a USB rcovery to recover the BIOS with. BIOS update softpaq will offer the opportunity of creating a recovery USB. I used the method on multiple occasions and it worked for me.