service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".

Similar Questions

• Error #3606: Sampler 0 format does not match the format of texture.

  Hello

  I try to use a cube texture but I got this error:

  Error #3606: Sampler 0 format does not match the format of texture.

  with this fragment of AGAL:

  ft0.w MOV, FC0 .x

  FT1.xyzw Tex, v0 .xzy, fs0
  Mul ft0.xyz, fc1.xyz, ft1.xyz
  MOV OC.xyzw, ft0.xyzw

  Apparently glsltoagal does not write the < parameters > fs0 is a problem or it has default values?

  Can I create textures to Cube in a specific way?

  I did a mistake using a faulty method, it was

  createCubeTexture

• OBIEE error - Datetime-01-01 value does not match the specified format

  I get this error after the promotion of Production. It works perfectly well on the Test Server.

  I am using SQL server. After launching the date as a varchar, it works fine.

  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query Failed: [nQSError: 46046]-01-01 Datetime value does not match the specified format. (HY000)

  Gurus of OBIEE please help

  JD

  I found the solution as well.

  The Windows Server ODBC driver was old (Version 6). I have who has upgraded to SQL Server Native Client 11.0 and everything works fine.

• Windows media player 11 on downloaded videos error "cannot read drive file does not support the file type or does not take in charge the codec used to compress the file.

  • now that the full version of k'lite seems to stop what is happening why hasent windows incorporated something similar in the windows media player 11, or they have another type of codec full, we can use to make this.only so many people have the same problem .please can help you.

  Hi bbdunford,

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

   

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only the files and videos only if it supports this type of file.

  Method 1

  Check if the video file format is supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  Method 2

  See the link below for more information on the codec.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• MS15-029 (KB3035126) does not apply but the version of the file does not match the KB article

  I have a small number of Windows 7 x 64 workstations that will not apply the KB3035126 patch, but they always show as having older versions of the WMIPhoto.dll file.  This would mean that they still have vulnerabilities that are specified in the article, correct?

  WMIPhoto.dll version on my computer which does not apply the update:
  6.2.9200.16440

  WMIPhoto.dll version after you apply the hotfix in KB article:

  File version size file name Date time file platform
  C:\windows\system32\wmphoto.dll 6.1.7601.18742 392 192 4 February 2015 03:16 x 64
  C:\windows\system32\wmphoto.dll 6.1.7601.22949 392 192 4 February 2015 03:46 x 64
  C:\windows\system32\wmphoto.dll 6.2.9200.17254 465 920 4 February 2015 03:16 x 64
  C:\windows\system32\wmphoto.dll 6.2.9200.21371 465 920 4 February 2015 03:46 x 64

  KB article:

  https://support.Microsoft.com/en-us/KB/3035126

  I'm deploy the patch with Configuration Manager 2012 and it came out to the majority of customers successfully.  Configuration Manager does not show the other guests as requiring even the patch, so I think its not required, but the associated dll files show always as old.

  I looked for any other reports of this issue, but nothing comes back.  For any idea or suggestion is appreciated.

  Hello

  
  Thank you for visiting Microsoft Community.
   
  I suggest you to post your query on our TechNet Forums social as this question right here.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

  Hope this information helps.

  Thank you.

   
  Sincerely,
  Ankit Rajput

• Error "ORA-01861: literal does not match the format ORA-06512 string.

  Hello
  I am getting error on EBS page when I click on the button
  
  I wrote the code in CO to insert values in table when the button is clicked
  
  but when I click the button it gives an error
  

  ORA-01861: literal does not match the format ORA-06512 string

  I think that his error of date format
  
  but I tried many styles of formatting but not yet able to fix it

  KAO

  You are right, that this is due to the error in the data type. Share the code that you have coded for button click here.

  Kind regards
  GYAN

• error indicates "file is possibly corrupted. The checksum does not match the checksum calculated.

  Hello world

  I use Vista Home Basic, SP2. Windows takes a lot of time in the judgment and often fails to do this completely. Windows after logout again a soft purr at the disk continues. Windows fails to start quickly. After several reboot it starts and sometimes even refuse except CD assisted.

  In order to repair boot directly from CD is not possible either. Jump the trunk and windows from the Windows CD start loading.

  Error, States "Checksum error. The file is possibly corrupted. The checksum does not match the checksum calculated'.

  Do I have to reinstall windows or any help please.

  Jean-Philippe

  Hello

  I suggest you to follow the methods and check.

  I suggest you perform a check disk in Windows Recovery Options.

  What are the system recovery options in Windows Vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Warning of Chkdsk.

  Important: If all data on the hard disk may be lost when running chkdsk, as the chkdsk attempts to repair that affected sector.

  Diagnosing memory problems on your computer

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

• Possible error with module GWT.xml file. The value of time compilation agent user (ie6) does not match the value of user.agent (ie8) run time

  Hi there... How can I sort this problem as this message looks back constantly on google Account... ERROR POSSIBLE WITH GWT. The value of time compilation agent MODULE XML FILE user (ie6) does not match the value of user.agent (ie8) run time

  Hello nEve Adam,.

  Thanks for the return of the response.  Below, I've added some links Google support on this issue.  I hope this helps.

  ERROR: Problem Possible with your *. GWT.XML file module. The value of compile time user.agent (opera) does not match

  http://www.Google.com/support/forum/p/blogger/thread?TID=2d6d9bd1326a07c4&hl=en

  In addition,

  Message from Web page

  http://social.technet.Microsoft.com/forums/en-us/ieitprocurrentver/thread/53194559-306a-4ffc-a614-4bac817f178d

• Signature App, number of Folios error does not match the main file Folio

  Hi all;

  I have a standalone application of 250 pages that I'm trying to compile for the Apple Store. I've read through the forums and enabled "AppBuilderLoggingEnabled.cfg" in my home directory of the user to discuss the issue. Here is an excerpt of the newspaper which has been created which, to me, shows why the app is not signed.

  46386 codesign ERROR [main]. Signatory - failure during the signature

  java.lang.RuntimeException: invalid package, number of folios does not match the primary file (Folio.xml or Issue.xml) 251-250 folio

  at com.adobe.devtech.codesign.IPAOutputHelper.convertFolioProduceFormatToFolio (IPAOutputHelp er.java:272)

  at com.adobe.devtech.codesign.IPAOutputHelper.replacePlaceholderFolio (IPAOutputHelper.java:1 92)

  at com.adobe.devtech.codesign.IPAOutputHelper.execute(IPAOutputHelper.java:82)

  at com.adobe.devtech.codesign.Signer.sign(Signer.java:169)

  at com.adobe.devtech.codesign.Signer.processArgs(Signer.java:106)

  at com.adobe.devtech.codesign.Signer.main(Signer.java:46)

  46388 codesign ERROR [main]. Signatory - error: invalid package, number of folios does not match the master folio (Folio.xml or Issue.xml) 251-250

  I deleted special characters in the article titles and rebuilt the app only to deal with the same error. I have advanced and created a new AppID in the portal to Apple developers, created new files available, and the error remains. I am now to create a new folio and import the items into the new folio to see if that will solve the problem of "number of folios does not.

  Any help or idea would be amazing. Thanks to you all.

  -mat

  I created a new folio and all items imported again. After hitting "Create App" for this new folio, to about 10 pages in a 'PDF Export' error stopped the app creation process. I went in InDesign to update the layout for the 10 page to see that the PDF export issue kept me from updating the page layouts as well. Some thing in the InDesign file was not playing nice with the creation of folio, so I created two new InDesign files, deleted the article and built a new article from scratch. I was able to import the new page in a new article to the main folio and click on "Create App" again. This time he had no problems with the creative process. I have synced files available in App Builder and could sign the application code.

  I guess the moral of the story is to double and even triple check each item along the way to make sure there is no problem, is introduced into the process that eventually causes headaches during the phase of distribution of creating applications!

  -mat

• Error: "the file is maybe damaged. the file header does not match the checksum calculated"during the installation of Windows 7/8

  * Original title: Question of re-Installation of operating system.

  I got the message during win 7 / Win 8 installation.

  "the file is maybe damaged. the file header does not match the checksum calculated.

  My config - processor Intel C2D, 2 GB of RAM, Intel motherboard, 500 GB HARD drive

  I have also replace Win 7 DVD and DVD player also replaced.

  I also reinstall my single RAM chip so many times. but the problem still exists.

  During Win XP SP 3 installation, no such message type not displayed. I can install it easily.

  Pls help me Sir, I would like to Win7 in my computer again.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, it seems that you are facing the question with the reinstallation of Windows 7 on your computer.

  Because the computer does not recognize the CD - R into the DVD player probably boot order is set to hard drive first. I suggest to change the DVD boot priority in the BIOS and then try to perform the Startup Repair.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  In order to make changes in the BIOS, I suggest you to contact the manufacturer of the computer.

  Method 1:

  Unplug all external devices connected to the computer with the exception of the keyboard and mouse and check if the problem persists.

  M odes 2:

  If the problem persists try the Startup Repair. It is one of the recovery tools in the System Recovery Options menu. This set of tools is on your computer's hard disk and on the Windows installation disc. To learn more about Startup Repair , you can refer to the below mentioned article:

  http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

  Method 3:

  In addition, if startup repair is not enough, you can perform a system restore, check if it helps you to solve the problem. For reference, you can see the article mentioned below.

  What are the system recovery options in Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• total size of the files of Windows 7 does not match the size of partition

  In the D: partition

  total space: 265 GB free space: 59.1 GB

  There is only one visible folder: Daisy, size: 87.4 GB from the Explorer

  Other records hidden three: info Volume system, c:\Windows\Msdownld.tmp, $RECYCLE. BIN takes up almost no space

  Of course free space does not match the file size.

  Do not partition system, no problem to update windows and restoration, sleep or page file.

  Some strange things:

  1. with the help of file size 3.4 correctly see the size of the file

  Daisy file occupies 206GB

  Once I copied the whole file to the other partition Daisy

  and the result is the record more like 2xxGB

  so I guess that 206GB is the right size

  /////////////////////////////////

  may be ignored.

  2 folder being read-only Daisy

  Even uncheck or untick read only box in the properties of the folder does no effect

  After loading, it still shows read only

  3. 'read only' does not work

  2, daisy file is read only

  but I managed to delete files inside

  ////////////////////////////////

  ////////////////////////////////

  Is it a mistake to folder structure?

  It's a newly installed windows, so I guess that windows is clean

  Hope to see the solution and identify the problem

  Thank you very much

  OK, based on your new information, the error is that Daisy is 206 GB but Windows Explorer reports it as 87GB.

  No other information seems more relevant.

  Ideas-

  1 run ChkDsk on the drive - [first of all, make sure you have a backup of Daisy or make a new backup always] in Windows Explorer, right-click on the drive & select Properties, then the Tools tab, then click the check now button, turn off the option to make repairs in first to see if there are errors or not before making any decision as repairs can delete or corrupt files which are reported in the file allocation table.

  2. find another utility that measures the size of record to help you track down all the difference here.  TreeSize Free will be repeated.

  I do not understand your comment "later, I found the reason why I can't locate the"office"is the language of auto change." It's in Chinese at first but watch the 'bureau' cmd"that this had not been mentioned before.

  Denis

• "The file is maybe damaged. The file header checksum does not match the checksum calculated. »

  Hello

  I work with a HP Pavilion a6030n PC with Vista OS base. I had problems with the computer recently when starting. He continues to work at some point during the process and crash, forcing a hard stop. I'm not too computer savvy, but can generally work through questions. I tried several (and probably useless) methods to try to get the computer to work, with a modicum of success. Today, I received this message: "the file is maybe damaged. The file header checksum does not match the checksum calculated. "Hmmm... I looked through the forums and found a lot of computer-speak, who basically told me that I'm over my head. I thought that I would try at least ask the question before resorting to what is the hard drive a person to fix if all goes well.
  I can get it working again, or is my HP to his last breath?
  Thank you!

  If warnings getting You ' r files are corrupted, which could indicate a problem with the hard drive (most likely) or the memory/RAM in the computer (a little less likely but a good possibility).  Your computer came with a disk diagnostic or diagnostic software you can run to test the components inside?  You can also download this software and run it to see if he can help you narrow the possibilities.  Otherwise, I recommend to find a local repairman good and trustworthy and have them check for you if you are not adept at hardware troubleshooting.  It can get very frustrating and very expensive, very quickly.

• Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated

  Toshiba satellite running Vista. The file is possibly corrupted. The file header checksum does not match the checksum calculated. Tried all posisible boots and no joy, continues to turn it back on! Frustration...

  Hey James,.

  I does no change, I didn't download a document from my email (from a sender of confidence). I tried to start in safe mode, just, it restarts and goes back to the corrupted checksum display... Last known good config was the same result! The only error message is one that is in the title of this post, not others. Another detail, that I forgot to add is that it does not get insofar as a logo windows before it fails, just the toshiba start screen, then either passes the corrupt message checksum or a blue screen and restarts before I can read the text on the blue screen. Thanks for your response! Any additional help would be excellent if you can. In the meantime, I'll try your methods. Thanks again
  OK, I have now managed a Startup Repair trying over and over again. Restore all settings and now looks very good, thanks for your help!

• 0xc0000221 error: Windows Boot Manager is possibly corrupt. The header checksum does not match the checksum calculated.

  Just turned laptop on a message saying... Manager of windows startup, the file is possibly corrupted, his header checksum does not match the sum of computer control. ?? File: / windows/system32/win load.exe...

  status: 0xc0000221.

  What help please this meen?

  Original title: help!

  Hi markwiggins,

  Follow these steps:

  Method 1: Run the Startup Repair

   

  For instructions, see the following article:

   

  Startup Repair: frequently asked questions

  If the startup repair does not resolve the problem, follow all the methods of these items:

  What to do if Windows does not start correctly

  How can I fix a startup (startup)?

  Method 2:

  Restore the system in the advanced system to a restore point recovery options menu before the show.

  For more details, see the following article:

  What are the system recovery options in Windows Vista?

  Method 3:

  Use the Bootrec.exe tool in the recovery Windows (WINRE) environment to troubleshoot and repair the Boot Configuration data.

   

  For instructions, see the following article:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

• Windows media player.cannot play theplayer file does not support the file type or might not support the codec used to compress the file

  Windows media player

  HI. When I tried to play a movie in my windows media player.it says windows media player.cannot play theplayer file does not support the file type or does not support the codec that was used to compress the file and when I click web help it lead me to windows media player error message help.you met c00d1199 error message when you use windows media player.

  Hello

  ·         What is the format of the files that you play when you get this error?

  ·         Do you get what this error during playback of all files or a particular file?

  You may encounter this error message for the following reasons:

  1. the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  2 - the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  You can try the steps and check if it makes a difference.

  a. to determine what codec was used with a specific file, play the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On the file tab, look at the sections of video codec and Audio codec.

  b. download and install Codecs by clicking on the PLAYER tab and check. To connect to the Internet and automatically download the Codecs of the reader.