Service pack guard repeatedly offered on windows update, cannot install Service pack 2 and Internet explorer 9

Similar Questions

• Windows Update cannot install KB2656353

  Windows Update cannot install KB2656353 on my Windows XP Professional SP 3 machine.  I tried to update windows install to 4.5 & manually install the update, but the installation stops when someone asks me for the Microsoft .net Framework 1 (disc 1).  How to solve this problem?  Thank you.

  Hello

  ·         Did you do changes on the computer before the show?

  ·         What is the full error message?

  Follow the steps.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable the antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network at the time the anti-virus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article to reset the Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

• Windows Update cannot install service pack XP how I remove it from the queue of the update?

  I have Win7 that came pre-installed on my new computer HP (Win7 Pro). I used PCMover to bring certain programs and files from my OLD Dell (XP Pro) to my new computer. Everything is fine, but I have in my folder of programs Window XP Service Pack 3-30/07/2008 version 20080414.031525.

  1. If this titled Window XP is in my program folder if my OS is Win 7?

  2. If I can successfully remove Windows XP Service Pack 3 of my programs - how can I remove the update for XP which is in my update Quebec?

  Hello

  ·        What is the update that is offered by windows update, number of KB?

  ·        What is the size of the file and the display name in the program file?

  I suspect it's an update to sp3 Office which is available in the update of Windows.

  Follow the steps mentioned in the article given below to verify the update is offered.

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• 2 updates repeatedly offered via Windows update

  Original title: latest Windows updates

  I have updates Windows automatically happening and for the past 5 days there are 2 updates to install and I'm sure they are the same 2 every night. It's as if the computer has entered a loop with these updates. Whenever I reboot then updates must be configured. Someone at - he of the clues as to what is happening.

  Hi Merlendd,

  Follow the steps listed in the knowledge base article mentioned below to solve the problem:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  Gokul - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Malicious Software Removal Tool repeatedly offered on Windows update. Manual update of the malicious software removal tool Windows sends the file to a different folder every time I install and is inaccessible

  Original title: manual update of Windows malicious software removal tool sends file in a different folder every time I install and is inaccessible

  I installed MRT repeatedly automatically and it keeps asking me to install.  I did it manually and it would be installed in a different folder on my other drive to a different location each time.  Here are two of them only starting today.                e:\be6123f9a9f687a86b13dca0939d0bc and e:\7321902026cdc0af0d9d93be

  Hello

  The following article can help you to solve this problem.
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339

• Windows Update cannot install Office SP2 and KB973924; codes error 78(f) and 643

  Hello

  I'm currently under Windows 7 64 bit which has been updated to XP in January this year.

  Since July, Windows 7 update tried to install following updates without success:

  1) the 2007 Microsoft Office Suite Service Pack 2 (SP1/SP2) - error code generated 78(f)

  (2) security Update for Microsoft Visual C++ 2008 Redistributable Package (KB973924) - 643 generated error code

  Windows Update tried to install these several times but without success.

  Also, I tried to install iTunes and get the following error:

  "An error occurred during the installation of assembly"Microsoft.VC80.CRT, version = "8.0.50727.4053", type = "win32", processorArchitecture, publickeyToken = "1fc8b3b9a1e18e3b" is"x 86".  See Help and Support for more information.  HRESULT: 0 X 80070002. »

  I tried many internet research to try and find a solution to these problems but have had no success.  I tried the following:

  (1) re-intsalled .net framework 4

  (2) run the System File Checker that could not so I tried my windows disk, but it could not start because the message says that two updates were waiting to be installed

  Now, I'm really worried that I have a big problem with Windows.

  Well, any help that you can give to avoid reinstalling my system would be appreiated.

  Thank you very much

  Thanks for your help Irfan H and PA bear but unfortunately none of the above suggestions has solved my problem and I couldn't find another solution on the internet that worked.

  Finally, I had to do a clean install of my system using an image of my hard drive that I created during my first installation of windows 7.  Now, everything seems to work properly and installing updates without problems.

  Thanks again.

• Problems after downloading the Service Pack 3 and Internet Explorer 8

  Hi, I have Windows Home Version 2002 and advises him to download the Service Pack 3 and decided to download Internet Explorer 8. It wouldn't let me download IE 8 and I got a blue screen. After apparently loaded, when it restarted check disk page it came and I noticed that a lot of pages in IE have been truncated. Now Internet Explorer or Firefox will load. Only Aol 9.7 will work. The update finally began to work with SP3, and while loading, the computer turns off. I did not disable Avast because I didn't know how. Please help it is very upsetting. It seems that every time that I update something it doesn't quite work.

  because sp3 is out for quite a long time your system has been widely exceeded and can have several problems.

  If I were you I backup all my data and perform a clean installation:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites

  I have used the site before aumha.

• Windows Update cannot install the update of Security No.2686509

  Windows Update has tried about 18 times to install the 2686509 update, and it does not reach every time, how can I install it

  Hi LyneDerksen,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         You are able to install other updates successfully?

  Follow these methods.

  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 4: Follow the steps in the article.

  How to reset the Windows Update components?

  You cannot install some programs or updates

• Windows Update - cannot install Windows SP2 or KB 979911.

  I have a Dell Inspiron 1525 with Windows Vista Ultimate 32-bit Edition installed, and in January he ceased to apply the updates of Windows security.  I tried to solve this problem, but eventually gave up and reinstalled windows (gasp!).

  Well, the drive I got for the machine was 2008, so he installed Windows Vista SP1.  I then applied a bunch of updates (via Windows Update) until I came to KB 979911, when it is not (always) with error 80073712.

  I did a SFC/scannow, but there are no errors.  I then installed the Microsoft Fix it Center and installed Windows Update Fixer.  Whenever I run this from I get Windows Update components detected problems must be repaired - and the result is successful in repairing the Windows Update components.  I also get the default data location Windows Update question changed - (verified result) and the comment "where Windows Update stores modified data must be repaired.  I doesn't matter if I know.

  I also see locations of repair by default Windows Update - works not (I don't know how to run) and a comment to the locations of Windows Update change to the default settings of Windows (I don't know how do either).

  I then run KB947821 (CheckSUR) to check the status of preparation of system.  and get several registry errors 2 of each of the components and missing packets related to Package_20_for_KB937286 in the Microsft_Windows_Help_CoreClientUAHP-Pachage (and the corresponding notice of UAUE) as well as the x86_microsoft-windows-help - artcone.resources and the related medctr.resources.

  Then... I try to install SP2 (which is now coming through my Windows Update and it of fine, restarts the machine, staging 3 100% and then comes back, restarts and continues the reversion.)  He returned in the form 800f082c of the error.  Installation via the stand-alone stub leads to the same result.

  FYI... I have run diagnostics on hardware and all is well.  I'm at my wits end here, so any help is appreciated.

  Thank you

  Harry Mudd, rogue interplanetary

  Hello

  1 did you change on your computer?

  2 are you able to install other updates successfully?

  Method 1:

  I suggest you to backup all important data and restore.

  How to back up or transfer your data on a Windows computer

  http://support.Microsoft.com/kb/971759

  Method 2:

  I suggest you perform the upgrade on the spot and check.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

• So, how can I knowif and Windows Update has installed correctly. Because my computer closed connection or and I have to restart.

  Theres times that I am on my computer and I lose the connection and theres times I'm on facebook or a game. And I try to go up and down.  and stop it stops in the middle of a game or facebook. Sometimes it I see the line over and over again.

  Hi Jo AnnHerrera,.

  What browser do you use to play games?

  You can visit Windows update history to check the recently installed updates, failed.

  Check the update history to see what updates have been installed. Visit the below mentioned link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  If you use Internet Explorer to play games, refer to the suggestions from this link.

  The problems of games online using Internet Explorer
  http://support.Microsoft.com/kb/2528246

  I hope this helps.

• Windows Update repeatedly offers the same update

  Original title: Auto updates

  KB 2756918 & KB 2742596 updates keep resurfacing as need to install.  I checked the settings of the computer and it shows that they have properly been installed 10 times via automatic update, but they always appear as need to install.  I have Windows XP Pro.

  Hello

  Thanks for posting your query in Microsoft Community.

  According the information you have provided, I understand that you are facing problems with Windows Update repeatedly offers the same update to Windows XP. I will certainly help you in this matter.

  Please follow the methods.

  Method 1:

  Reset Windows update components and check.

  See the link.

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 2:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  If you face problems more when working with Windows Mail on the Microsoft Community Forum.

• Why Windows Update repeatedly offers the same update?

  Original title: duplicate updates

  Why Windows Update tells me to download "new" updates, when they were listed as installed successfully 2 days ago?

  Hello

  I suggest you to follow the steps in troubleshooting this article and check if it helps.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

  See also: the problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Error 8024402f Windows update after installing service pack 2.

  I received the error: 8024402f for windows update after installing service pack 2. I tried to fix it and manual fixation on this website http://support.microsoft.com/kb/836941, but I still receive same error code what do I do? I checked the history update, but it is not a failure to update.

  Original title: 8024402f error Code

  Hello

  Often we see weird behavior as the result of a program of loading during the startup process.

  To solve these, we use the clean boot troubleshooting.

  The following article describes this process:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

  We'll do this before uninstalling Service Pack 2.

  If the behavior persists, then we can clean boot, uninstall and reinstall Service Pack 2.

  Best regards

  Matthew_Ha

• KB976569 offered via windows update again and again, properly installed

  Hello

  I have XP Home Edition SP3.  I installed this update several times, but he continues to appear in my list of updates on the site of Microsoft Updates of the software to install.  Whenever it says the installation was successful.

  It appears in Add/Remove programs as if it has been installed, so why is this update continuously displayed in the list of updates must be installed on the Windows Update site?

  Any suggestions or explanations would be appreciated. Eric

  What is KB976569 listed in Add/Remove Programs [Yes/No]
  
  Yes

  Automatic updates (or the Windows Update Web site) still offers KB976569? [Yes/No]
  
  Yes

  The following may solve the behavior:

  1. stop the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Stop
  (Stopping the service will take a moment)

  2 remove the contents of the download folder:

  Start > run > %windir%\SoftwareDistribution (enter) > [OK]
  Open the download folder and delete its contents
  Close the window.

  3. go to the Windows Update Web site. Select CUSTOM and allow the analysis to be performed. Uncheck/unselect KB976569 and hide ("don't show me this update").

  4. start the automatic updates service:

  Start > run > services.msc (enter) > [OK]
  Double-click Automatic Updates > click Start
  (Starting the service will take a moment)

  NB: If you are running a manual check for updates at http://windowsupdate.microsoft.com, you will see a prompt saying: 'you have hidden a significant update. You want to install it now? "Answer NO to this prompt.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.