Service pack update from 1 to 2 now, I get a "windows did not start properly.

Similar Questions

• Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

  Windows XP SP3 problem

  Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

  This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

  It's certainly interesting!

  If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24
  SHOULD work!
  I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
  Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&DLC=en&softwareitem=PV-60484-2
  and try the SP3 Setup file again.
  But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
  1. have you safely backed up ALL your data?
  2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

• Windows did not start after update of the Service Park 2

  Update Windows Installer service Park 2 but my system could not start. I do restor system but cannot start windows.

  There is a free Microsoft support when it comes to updates:

  https://consumersecuritysupport.Microsoft.com/default.aspx?ProductKey=pcsafetyupdatesnotinstalled&task=country&St=1&wfxredirect=1

• 1706 error trying to install Net Framework 1.1 Service Pack 1 and finally 10% demand netfx.msi file, which I did not?

  I try to install the update for Net FrameWork 1.1, the SP-1, at the end of the installation fails with an error 1706 code because I can't find netfx.msi install file. I don't have a disk. Am running XP Pro SP3. Any help would be greatly appreciated!

  Thank you

  Frank

  Hi HarrytheHat,

  1. did you of recent changes on the computer?

  2 are you able to install some other updates on the computer?

  3. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You may receive an error message "Failed to install" or "error 1706" error message when you try to install the .NET Framework 1.0 SP3

  http://support.Microsoft.com/kb/908907

   

  If the steps mentioned in the article above do not, then refer the article below and try the steps mentioned, checl if it works.

  How to troubleshoot installation issues of the Microsoft.NET Framework 1.1 in Windows XP or Windows 2000

  http://support.Microsoft.com/kb/824643

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After installing Windows XP service pack 3, Windows does not start not upward and only able to boot mode safe

  After installation of service pack 3 I try to restart the computer, but I am sent to the screen that allows only "SAFE mode", safe mode with network, etc... Start up.  Windows does not start normally.  Also during the instalation it won't save the backup files msadds... file inetwiz... file inetwiz...

  Hello

  · You receive an error message or error code when you try to start in normal mode?

  · What is the number and the model of the computer?

  Follow the steps below and check, if it helps:

  1 uninstall windows XP service pack 3 from your computer, you can check the link below: how to remove Windows XP Service Pack 3 from your computer: http://support.microsoft.com/kb/950249

  2 start the computer in normal mode, and then install service pack 3 on the computer. Before installing service pack 3 see the link that has steps to take before you install Windows XP Service Pack 3 below: http://support.microsoft.com/kb/950717

• Windows does not start after Windows updates downloading

  I have an IBM Thinkpad R32 with Windows XP, 512 MB of ram and a Pentium 4 processor. Wednesday night, when I stopped, Microsoft downloaded a bunch of updates - 13 to be exact. When I went to start my computer the next day, I got a black screen saying "We apologize for the inconvenience, but Windows did not start successfully.

  When I select 'safe mode' I get a series of files. When I select "Last known configuration" or "Start windows normally" I get a blue screen with "a thread tried to release a source he did not' and the error code that goes in the bottom" STOP: 0x000000E3 "(0X80558BE0, 0X82FCA548, 0 x 00000000, 0 x 00000002). "When I press F8 for advanced startup options, I get the same result to choose 'safe mode' as before, but also the blue screen to 'last known...". "or"start windows normally ".

  I have a recovery disk but it seems to be the 2nd of the 2 discs, and I can't find the first. More I am concerned about the loss of material on my computer (have not saved in a while). My technical skills are marginal - I'm good at copy what is on the screen but that's all.

  Needless to say, I'm a little upset with Microsoft for burning my muddy computer with its updates. I set it so that I have to approve the updates, but I wasn't paying attention when I hit the button turn off with the updates.

  shadiahm,
  Thanks for posting on the Microsoft Answers forum.  The first thing to do is to remove the external devices (printer, USB drives, USB hubs, etc.), then restart.

  If you have your XP cd, you can run a repair installation: http://support.microsoft.com/kb/315341.  If you do not have a XP CD you must contact your PC manufacturer to obtain replacement disks.

  Also, if you have access to your XP, you can start in repair mode and run SFC/scannow: http://support.microsoft.com/kb/310747 Mike - engineer Microsoft Support responses
  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I scan for Windows Vista Service Pack update (published 4/2009) comes in,

  I redid my computer a few months ago restore to factory settings and restore my files from a backup disk. Everything seemed to work properly.  A few weeks ago a full scan found a worm & some virus which I removed. Now, I have a problem with the updates. When I scan for Windows Vista Service Pack update (published 4/2009) arrives.  When I click to install it, it is saying it is correctly installed (in 30 seconds) and yet he continues to come when I'm scanning for updates.    Should I restore settings again?  After looking for info on the forums of windows, I did the System File Checker to check corrupt files.  Several corrupted files appear in the details of the SFC.  But their fixation is "over my head".   I glued the SFC details below. Any help would be appreciated.  Thank you

  2012-09-04 11:51:44, info CSI 00000006 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:44, transaction Info CSI 00000007 [SR] beginning verify and repair
  2012-09-04 11:51:47, info CSI 00000009 [SR] full audit
  2012-09-04 11:51:48, CSI of information 0000000 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:51:48, CSI Info 0000000b transaction [SR] beginning verify and repair
  2012-09-04 11:51:53, CSI to 0000000 d [SR] full audit information
  2012-09-04 11:51:53, CSI 0000000e Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:53, CSI Info 0000000f transaction [SR] beginning verify and repair
  2012-09-04 11:51:55, info CSI 00000011 [SR] full audit
  2012-09-04 11:51:56, info CSI 00000012 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:56, transaction Info CSI 00000013 [SR] beginning verify and repair
  2012-09-04 11:51:57, info CSI 00000015 [SR] full audit
  2012-09-04 11:51:57, info CSI 00000016 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:51:57, Info CSI 00000017 [SR] beginning verify and repair
  2012-09-04 11:51:59, info CSI 00000019 [SR] full audit
  2012-09-04 11:51:59, CSI Info 0000001 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:51:59, CSI Info 0000001 b transaction [SR] beginning verify and repair
  2012-09-04 11:52:01, CSI Info 0000001 d [SR] full audit
  2012-09-04 11:52:01, 0000001e Info [SR] CSI components check 100 (0 x 00000064)
  2012-09-04 11:52:01, CSI Info 0000001f transaction [SR] beginning verify and repair
  2012-09-04 11:52:03, info CSI 00000021 [SR] full audit
  2012-09-04 11:52:03, info CSI 00000022 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:03, transaction Info CSI 00000023 [SR] beginning verify and repair
  2012-09-04 11:52:04, info CSI 00000025 [SR] full audit
  2012-09-04 11:52:05, info CSI 00000026 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:05, the transaction Info CSI 00000027 [SR] beginning verify and repair
  2012-09-04 11:52:06, info CSI 00000029 [SR] full audit
  2012-09-04 11:52:07, CSI Info 0000002 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:52:07, CSI Info 0000002b transaction [SR] beginning verify and repair
  2012-09-04 11:52:09, info CSI 0000002d [SR] full audit
  2012-09-04 11:52:09, CSI [SR] 0000002e Info components check 100 (0 x 00000064)
  2012-09-04 11:52:09, CSI Info 0000002f transaction [SR] beginning verify and repair
  2012-09-04 11:52:11, info CSI 00000031 [SR] full audit
  2012-09-04 11:52:12, info CSI 00000032 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:12, transaction Info CSI 00000033 [SR] beginning verify and repair
  2012-09-04 11:52:13, info CSI 00000035 [SR] full audit
  2012-09-04 11:52:14, info CSI 00000036 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:14, transaction Info CSI 00000037 [SR] beginning verify and repair
  2012-09-04 11:52:15, Info CSI 00000039 [SR] check complete
  2012-09-04 11:52:16, CSI Info 0000003 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:52:16, CSI Info 0000003b transaction [SR] beginning verify and repair
  2012-09-04 11:52:19, info CSI 0000003d [SR] full audit
  2012-09-04 11:52:19, CSI 0000003e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:52:19, CSI Info 0000003f transaction [SR] beginning verify and repair
  2012-09-04 11:52:24, info CSI 00000041 [SR] full audit
  2012-09-04 11:52:24, info CSI 00000042 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:24, transaction Info CSI 00000043 [SR] beginning verify and repair
  2012-09-04 11:52:29, info CSI 00000046 [SR] full audit
  2012-09-04 11:52:29, info CSI 00000047 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:29, transaction Info CSI 00000048 [SR] beginning verify and repair
  2012-09-04 11:52:33, CSI Info 0000004a Verify [SR] full
  2012-09-04 11:52:34, CSI Info 0000004 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:52:34, CSI Info 0000004 c [SR] beginning verify and repair operation
  2012-09-04 11:52:37, CSI 0000004f [SR] Verify Info full
  2012-09-04 11:52:38, info CSI 00000050 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:38, Info CSI 00000051 [SR] beginning verify and repair
  2012-09-04 11:52:43, info CSI 00000053 [SR] full audit
  2012-09-04 11:52:43, info CSI 00000054 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:43, transaction Info CSI 00000055 [SR] beginning verify and repair
  2012-09-04 11:52:51, CSI 0000005f [SR] Verify Info full
  2012-09-04 11:52:51, info CSI 00000060 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:51, transaction Info CSI 00000061 [SR] beginning verify and repair
  2012-09-04 11:52:55, info CSI 00000063 [SR] full audit
  2012-09-04 11:52:56, info CSI 00000064 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:52:56, transaction Info CSI 00000065 [SR] beginning verify and repair
  2012-09-04 11:53, info CSI 00000067 [SR] full audit
  2012-09-04 11:53, info CSI 00000068 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53, transaction Info CSI 00000069 [SR] beginning verify and repair
  2012-09-04 11:53:05, CSI Info 0000006b Verify [SR] full
  2012-09-04 11:53:06, components of CSI Info 0000006 c [SR] 100 audit (0 x 00000064)
  2012-09-04 11:53:06, CSI Info 0000006 d [SR] beginning verify and repair transaction
  2012-09-04 11:53:14, CSI Info 0000006f Verify [SR] full
  2012-09-04 11:53:15, info CSI 00000070 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:15, transaction Info CSI 00000071 [SR] beginning verify and repair
  2012-09-04 11:53:24, Info CSI 00000075 [SR] check complete
  2012-09-04 11:53:24, info CSI 00000076 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:24, transaction Info CSI 00000077 [SR] beginning verify and repair
  2012-09-04 11:53:38, info CSI 00000079 [SR] full audit
  2012-09-04 11:53:38, CSI Info 0000007 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:53:38, CSI Info 0000007 b transaction [SR] beginning verify and repair
  2012-09-04 11:53:52, CSI Info 0000007 d [SR] full audit
  2012-09-04 11:53:52, CSI 0000007e Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:52, CSI Info 0000007f transaction [SR] beginning verify and repair
  2012-09-04 11:53:55, info CSI 00000081 [SR] full audit
  2012-09-04 11:53:55, info CSI 00000082 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:55, transaction Info CSI 00000083 [SR] beginning verify and repair
  2012-09-04 11:53:57, info CSI 00000085 [SR] full audit
  2012-09-04 11:53:57, info CSI 00000086 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:53:57, Info CSI 00000087 [SR] beginning verify and repair
  2012-09-04 11:53:59, info CSI 00000089 [SR] full audit
  2012-09-04 11:53:59, CSI Info 0000008 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:53:59, CSI Info 0000008b transaction [SR] beginning verify and repair
  2012-09-04 11:54:09, 000000 a 9 CSI Info [SR] verification complete
  2012-09-04 11:54:10, 000000aa CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:10, CSI Info 000000ab transaction [SR] beginning verify and repair
  2012-09-04 11:54:11, 000000ad CSI Info [SR] verification complete
  2012-09-04 11:54:11, 000000ae CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:11, 000000af CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:14, 000000 b 1 CSI Info [SR] verification complete
  2012-09-04 11:54:15, 000000 b 2 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:15, 000000 b 3 CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:19, 000000 b 5 CSI Info [SR] verification complete
  2012-09-04 11:54:19, 000000 b 6 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:19, 000000 b 7 CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:26, 000000 b 9 CSI Info [SR] verification complete
  2012-09-04 11:54:27, 000000ba CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:27, 000000bb CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:54:32, 000000bd CSI Info [SR] verification complete
  2012-09-04 11:54:32, 000000be CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:32, CSI Info 000000bf transaction [SR] beginning verify and repair
  2012-09-04 11:54:38, CSI Info 000000 c 1 [SR] full check
  2012-09-04 11:54:38, CSI Info 000000 c 2 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:54:38, CSI Info 000000 c 3 [SR] beginning operation check and repair
  2012-09-04 11:54:42, CSI Info 000000 c 5 [SR] full check
  2012-09-04 11:54:42, CSI 000000C6 [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:54:42, CSI Info 000000 c 7 [SR] beginning operation check and repair
  2012-09-04 11:54:46, CSI Info 000000 c 9 [SR] full check
  2012-09-04 11:54:47, 000000 CSI Info [SR] this component check 100 (0 x 00000064)
  2012-09-04 11:54:47, CSI Info 000000cb transaction [SR] beginning verify and repair
  2012-09-04 11:54:57, CSI Info 000000dc Verify [SR] full
  2012-09-04 11:54:57, Info CSI [SR] 000000dd components check 100 (0 x 00000064)
  2012-09-04 11:54:57, CSI Info 000000de transaction [SR] beginning verify and repair
  2012-09-04 11:55:08, 000000f4 CSI Info [SR] verification complete
  2012-09-04 11:55:09, 000000f5 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:09, CSI Info 000000f6 transaction [SR] beginning verify and repair
  2012-09-04 11:55:30, 000000f8 CSI Info [SR] verification complete
  2012-09-04 11:55:31, 000000f9 CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:31, 000000fa CSI Info transaction [SR] beginning verify and repair
  2012-09-04 11:55:42, CSI Info 000000 fc [SR] full audit
  2012-09-04 11:55:42, 000000fd CSI Info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:42, CSI Info 000000fe transaction [SR] beginning verify and repair
  2012-09-04 11:55:55, info CSI 00000100 [SR] full audit
  2012-09-04 11:55:55, info CSI 00000101 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:55:55, transaction Info CSI 00000102 [SR] beginning verify and repair
  2012-09-04 11:55:57, info CSI 00000104 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:01, info CSI 00000106 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:01, info CSI 00000107 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
  2012-09-04 11:56:01, CSI Info 0000010a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2012-09-04 11:56:01, CSI Info 0000010 c [SR] full audit
  2012-09-04 11:56:01, components of CSI Info 0000010 d [SR] 100 audit (0 x 00000064)
  2012-09-04 11:56:01, Info CSI 0000010e transaction [SR] beginning verify and repair
  2012-09-04 11:56:06, info CSI 00000110 [SR] full audit
  2012-09-04 11:56:06, info CSI 00000111 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:06, transaction Info CSI 00000112 [SR] beginning verify and repair
  2012-09-04 11:56:11, info CSI 00000115 [SR] full audit
  2012-09-04 11:56:11, info CSI 00000116 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:11, transaction Info CSI 00000117 [SR] beginning verify and repair
  2012-09-04 11:56:24, Info CSI 00000119 [SR] check complete
  2012-09-04 11:56:24, CSI Info 0000011 components [SR] a check 100 (0 x 00000064)
  2012-09-04 11:56:24, CSI Info 0000011b transaction [SR] beginning verify and repair
  2012-09-04 11:56:31, CSI Info 0000011 d [SR] full audit
  2012-09-04 11:56:31, CSI 0000011e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:56:31, CSI Info 0000011f transaction [SR] beginning verify and repair
  2012-09-04 11:56:38, info CSI 00000121 [SR] full audit
  2012-09-04 11:56:39, 00000122 CSI info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:39, transaction Info CSI 00000123 [SR] beginning verify and repair
  2012-09-04 11:56:45, info CSI 00000125 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:49, info CSI 00000127 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:56:49, info CSI 00000128 [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
  2012-09-04 11:56:49, CSI Info 0000012b [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
  2012-09-04 11:56:50, info CSI 0000012d [SR] full audit
  2012-09-04 11:56:50, CSI 0000012e [SR] Info components check 100 (0 x 00000064)
  2012-09-04 11:56:50, CSI Info 0000012f transaction [SR] beginning verify and repair
  2012-09-04 11:56:56, info CSI 00000131 [SR] full audit
  2012-09-04 11:56:56, info CSI 00000132 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:56:56, transaction Info CSI 00000133 [SR] beginning verify and repair
  2012-09-04 11:57:05, info CSI 00000135 [SR] full audit
  2012-09-04 11:57:06, info CSI 00000136 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:06, transaction Info CSI 00000137 [SR] beginning verify and repair
  2012-09-04 11:57:18, CSI Info 0000013a Verify [SR] full
  2012-09-04 11:57:18, CSI Info 0000013 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:57:18, CSI Info 0000013 c [SR] beginning verify and repair operation
  2012-09-04 11:57:22, Info CSI 0000013e [SR] full Verify
  2012-09-04 11:57:23, CSI 0000013f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:57:23, transaction Info 00000140 CSI [SR] beginning verify and repair
  2012-09-04 11:57:29, info CSI 00000142 [SR] full audit
  2012-09-04 11:57:29, info CSI 00000143 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:29, transaction Info CSI 00000144 [SR] beginning verify and repair
  2012-09-04 11:57:34, Info CSI 00000146 [SR] full check
  2012-09-04 11:57:34, Info CSI 00000147 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:34, transaction Info CSI 00000148 [SR] beginning verify and repair
  2012-09-04 11:57:42, CSI Info 0000014a Verify [SR] full
  2012-09-04 11:57:42, CSI Info 0000014 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:57:42, CSI Info 0000014 c [SR] beginning verify and repair operation
  2012-09-04 11:57:51, Info CSI 0000014e [SR] full Verify
  2012-09-04 11:57:51, CSI 0000014f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:57:51, transaction Info CSI 00000150 [SR] beginning verify and repair
  2012-09-04 11:57:55, info CSI 00000152 [SR] full audit
  2012-09-04 11:57:55, info CSI 00000153 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:57:55, transaction Info CSI 00000154 [SR] beginning verify and repair
  2012-09-04 11:58, info CSI 00000156 [SR] full audit
  2012-09-04 11:58:01, info CSI 00000157 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:01, Info CSI 00000158 [SR] beginning verify and repair
  2012-09-04 11:58:05, CSI Info 0000015a Verify [SR] full
  2012-09-04 11:58:05, CSI Info 0000015 components [SR] b check 100 (0 x 00000064)
  2012-09-04 11:58:05, CSI Info 0000015 c [SR] beginning verify and repair operation
  2012-09-04 11:58:10, Info CSI 0000015e [SR] full Verify
  2012-09-04 11:58:11, CSI 0000015f [SR] components Info check 100 (0 x 00000064)
  2012-09-04 11:58:11, transaction Info CSI 00000160 [SR] beginning verify and repair
  2012-09-04 11:58:16, Info CSI 00000162 [SR] check complete
  2012-09-04 11:58:17, info CSI 00000163 [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:17, transaction Info CSI 00000164 [SR] beginning verify and repair
  2012-09-04 11:58:20, Info CSI 00000166 [SR] check complete
  2012-09-04 11:58:20, 00000167 CSI info [SR] components check 100 (0 x 00000064)
  2012-09-04 11:58:20, transaction Info CSI 00000168 [SR] beginning verify and repair
  2012-09-04 11:58:24, CSI Info 0000016a Verify [SR] full
  2012-09-04 11:58:25, CSI Info 0000016b [SR] audit 92 (0x0000005c) components
  2012-09-04 11:58:25, CSI Info 0000016 c [SR] beginning verify and repair operation
  2012-09-04 11:58:31, Info CSI 0000016e [SR] full Verify
  2012-09-04 11:58:31, CSI 0000016f [SR] repair 2 Info components
  2012-09-04 11:58:31, transaction Info CSI 00000170 [SR] beginning verify and repair
  2012-09-04 11:58:31, info CSI 00000172 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, info CSI 00000174 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, info CSI 00000176 [SR] cannot repair the military record [l:20 {10}] "tcpmon.ini" Microsoft-Windows-printing-StandardPortMonitor-TCPMonINI, Version = 6.0.6000.16386, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, Info CSI 00000177 [SR] this element is referenced by [ml:38 {19}, l:36 {18}] "Windows Foundation.
  2012-09-04 11:58:31, CSI Info 0000017a [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:20{10}]"TCPMon.ini '; source file in the store is also corrupted
  2012-09-04 11:58:31, CSI Info 0000017 c [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6000.16615, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-09-04 11:58:31, CSI Info 0000017 d [SR] this element is referenced by [l:160 {80}] "' Package_37_for_KB943411 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.5.943411 - 110_RTM_neutral_GDR" "
  2012-09-04 11:58:31, info CSI 00000180 [SR] could not reproject corrupted file [ml:520 {260}, l:72 {36}] '------? "\C:\Program Files\Windows Sidebar"------[l:24 {12}] "settings.ini"; source file in the store is also corrupted
  2012-09-04 11:58:32, info CSI 00000182 [SR] full repair
  2012-09-04 11:58:32, info CSI 00000183 [SR] validation of transaction
  2012-09-04 11:58:32, info CSI 00000187 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  Hi Mzvern,

  ·         If she invites only to install Vista Service Pack?

  That Factory Restore is the last step in resolving this issue.

  Follow these steps to see what Windows Update is originally the question or any error message/code:

  a. click Start, type Update in the start search box.

  b. in the list of results, click Windows Update.

  (c) in the left pane, click view update history.

  In the meantime, follow the suggestions below for a possible solution:

  Method 1: I suggest you follow the article and then check if it solves the problem.

  Windows Update or Microsoft Update repeatedly offers the same update

  http://support.Microsoft.com/kb/910339

   

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft article:

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Important: During the scan of the hard drive if bad sectors are found, the scanner tries to repair this sector, all available on which data may be lost.

  Method 2: For cause of CFS, it wasn't able to repair files of Member, you can follow these steps.

  If the System File Checker tool cannot repair a file, follow these steps:1.At a command prompt, type the following command and press ENTER:

  takeown /f Path_And_File_Name

  For example, type takeown /f E:\windows\system32\jscript.dll.

  2. type the following command and press ENTER to grant administrators full access to the file:

  ICACLS Path_And_File_Name/grant ADMINISTRATORS: F

  For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.

  3. type the following command to replace the file with a known good copy of the file:

  Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination

  For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.

  For more information, see the following articles:

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  http://support.Microsoft.com/kb/928228

   

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

   

  Let us know the results.

• Yes I installed service pack 3 on the computer and now my computer does not have a cdrom in the bios or were for this matter__

  Yes, when my computer is its service Pack 3 update, my computer did evidence the cdrom in the bios or had other

  Device Manager... can be empty after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices... After you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• I went from a Win7 32-bit on a 64-bit win7 machine computer. Now, I get "this connection is not approved" any solution? tried everything

  I went from a Win7 32-bit on a 64-bit win7 machine computer. Now, I get "this connection is not approved" on many pages, including support for Mozilla, Yahoo, send a mail to yahoo, etc. The only thing that has changed is my computer. Everything worked on the 32-bit system. I tried DELL-no-help, I tried Norton-no-help - I tried all published recommendations - nothing helped. Can someone give an explanation of how solve this incompatibility (presumed) Win7 64 bit computers? How can I quickly and absolutely get rid of MESSAGES "THIS CONNECTION IS UNTRUSTED"?
  Thanks for ANY help from an expert.

  Right after that I posted this problem it seemed the solution:
  I noticed a pop-up, named "BROWSERSAFEGUARD" who has attempted to set my computer to a "cleaner" for a price. I checked in my installed programs if there was a "Browsersafeguard" and he was there. I uninstalled it, check "incompatible with my system" and my computer turned on like never before. Lightning fast connections and no message more "this connection is not approved. Wow. It took me 7 days to find it. Hope this will help you, too. Send a message to this one to let me know if it solved your problem

• try to install Service Pack 1 for Visual Studio 2010 and I get a Code 13EC

  original title: 13EC error Code

  I am installing Service Pack 1 for Visual Studio 2010 and I get a Code 13EC wrror I don't understand why I get this and how can I reslove it?

  Uninstall .NET Framework 4.0 components, then try the installation again.

  For further assistance, please post in the following forum:
  http://social.msdn.Microsoft.com/forums/en-SG/vssetup/threads

• Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  Thoughts?

  Until a few days ago I was able to print a PDF from Acrobat Reader ms in Windows 7.  Now I get "the document could not be printed."  The next panel says "there are no pages selected to print," even if all the pages have been selected.  I've uninstalled Reader and reinstalled, but the problem remains.  I also tried to repair the installation and that doesn't work anymore.

  Thanks for the tip.  It turned out that kind Reader has been commissioning in protected mode.  I changed the setting and it prints now as before.

  Thank you

• I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and I w

  I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and sent me a few files that has corrected the problem.  Can help you.  With our thanks.  John

  Try this: error "Unable to start properly - 0Xc00007b"

• Windows does not start after XP SP2 update

  automatic update using service pack 2 installed. restart windows when you are prompted. Windows will not start now.

  Hello

  ·        What happens when you try to boot to the desktop, you get an error message? If Yes, what is the exact error that you are experiencing?

  ·        You are able to boot into safe mode without any problem?

  Method 1:

  If you are able to boot into safe mode then, I suggest to do a system restore from there on the desktop normally boot and check.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode and do a system restore from safe mode.

  To do a restore system from safe mode, I suggest you follow the steps mentioned in the article below.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  Method 2:

  If you are not able to boot in safe mode then, I suggest you follow the steps mentioned in the article below.

  How do I recover from a corrupted registry that prevents Windows XP startup

  http://support.Microsoft.com/kb/307545

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows will not start since the update :( Help, please

  Windows could not start. a recent hardware or software change might be the problem

  file\windows\system32\config\system
  status: 0xc00000e9

  When I try to start the system restart that nothing happens

  When I try to restore the computer to factory settings it says that the necessary files are not there.

  My computer was working fine until I installed an automatic update from microsoft. Help, please

  For any problem with the recovery of software/process to factory settings, you will need to contact the manufacturer of your computer.
  This isn't their recovery process, Microsoft.

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• "Windows failed the genuine validation...". Go online and set now and get genuine Windows. »

  I get a message "Windows failed the genuine validation...". Go online and set now and get genuine Windows. "I have a copy of Windows XP that I bought in the store.  My computer came with Vista; When the hard drive crashed, I had the store install the copy of XP that I had bought earlier, instead of reinstalling Vista.  Why I shouldn't "genuine Windows" already?

  You have an installation made from a set of recovery discs Dell on a Hewlett-Packard machine.

  This facility has NOT been made using appropriate media and it is likely that this is what is causing your problems.

  Next time, the system displays as non-authentique try to use Update tool product key to make the real system-

  Use the product key update tool - http://windows.microsoft.com/en-GB/windows/help/genuine/product-key to change the key for that which concerns your COA sticker, and then to restart and to publish a new report MGADiag we can confirm everything went well