Services Exchange do not start automatically when rebooting the server (SBS 2011/07)

Both services must be started manually after the server is restarted namely:
Authentication based on the form of MS Exchange
The MS Exchange RPC Client Access

Try asking in the Windows Server forum:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

Tags: Windows

Similar Questions

  • 12 iTunes does not start automatically when I connect iPhone 6s

    I have a desktop Windows 10 new and I connect my 6s iPhone more synchronization with Outlook, every day.  When I connect my iPhone, iTunes not open automatically as it has always done in later versions.  If I manually open iTunes, then the iPhone syncs fine, but I would like to do this annoying extra step every day.

    I have read several posts on this topic and here is what I tried:

    -J' I uninstalled/reinstalled iTunes

    -J' checked I have the vs 12.4.3.1 of Windows and iTunes updates

    -I went to Device Manager > Apple Mobile Device Driver > pointed to: \Program Apple Mobile Device Support\Drivers updated and referred 'the driver is up-to-date.

    -In iTunes > edit > Preferences > devices > prevent iPhone sync automatically is not checked

    -In iTunes > my iPhone > summary, is checked automatically sync when this iPhone is connected.  I also tried unchecking it, apply, close/reopen iTunes and then check again with the same result.

    -J' have tried using a different USB port

    In addition to this, when I connect my iPhone to a different USB port, Windows gives a saying "Select to choose what happens with this device.  When I click on it, Windows provides about 5 options on how to import the device or to open an application when the device is connected, but iTunes is not in the list of apps to select from.  In addition, in older versions of Windows, there is a link to select a different program from your pc to use if it wasn't in the shortlist and this link/option is no longer there it that it seems impossible to select iTunes opens automatically when the iPhone is connected.

    FYI, I had exactly the same problem on my old pc once it has been upgraded to Windows 10.

    Does anyone know how get iTunes opens automatically when I connect my iPhone?

    I suspect that you need to tell Windows not to do anything, make sure that the iTunes Helper application is configured to run on start-up (activation/deactivation of the next triggering and to solve this problem) and in iTunes, select the device and choose the option to run iTunes when the device is connected.

    TT2

  • How Auto start the Physical Standby Database (when restarting the server)

    Dear All (s)

    I configure oracle (10.2.0) dataguard on the production database, a time server restart because of disconnectivity to power, I want restard dataguard when rebooting the server. I'm using Server 2003 32-bit. Guide me how I can run after orders when the server restarts.

    SQL > connect/as sysdba
    SQL > bootable media.
    SQL > ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;


    Thanks in advance

    I want to run these command each time when the server is restarted.

    Yes, I did not understand that... but what's the problem? You can't schedule a task when the server starts?

  • Windows 7 firewall service does not start automatically and cannot be started manually

    Update Vista Home Premium SP1, removed the Comodo, removed AVG Free 8.5, put upgraded to Windows 7 Home.

    Attempted to set security. Firewall is "red". Could not be defined. Snap-in did not work (0x6D8).
    Have rubbed the registry for References all Symantec and Comodo and the computer restarted.

    Firewall service is set to start "automatic."
    Log tab is set to "This account" with a password - I have no idea from this password (and don't know what it is).  Seems that log on should be "Local System account" with Desktop interaction

    Falied given departure following the event log:
    Log name: System
    Source: Service Control Manager
    Date: 2009-11-06 12:19:25
    Event ID: 7024
    Task category: no
    Level: error
    Keywords: Classic
    User: n/a
    Computer: VISTALAP
    Description:
    The Windows Firewall service is stopped with the special service error access is denied...
    The event XML:
    http://schemas.Microsoft.com/win/2004/08/events/event">
     
       
        7024
        0
        2
        0
        0
        0 x 8080000000000000
       
        99759
       
       
        System
        VISTALAP
       
     
     
        Windows Firewall
        %%d Ko
     

    Repository is consistent.

    Suggestions?

    Hi dynameme,

    What is a home or work computer? Is there any server/domain mean?

    Try a startup repair, it sounds as if you have an error with the help user account to run the service.  Startup Repair may be able to fix this.  If this isn't the case, then you should try to repair the Installation.

    STARTUP REPAIR

    If you have a Windows 7 installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.

    If you have a Windows 7 installation disc:

    1. Insert the installation disc.

    2. restart your computer.

    Click the Start button, click the arrow next to the button lock and then click on restart.

    3. If you are prompted, press any key to start Windows from the installation disc.

    Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

    4. choose your language settings, and then click Next.

    5. click on repair your computer.

    6. Select the operating system you want to repair, and then click Next.

    7. in the System Recovery Options menu, click Startup Repair. Startup Repair can invite you to make choices as it tries to solve the problem, and if necessary, it may restart your computer, because it makes the repairs.

    Installation of Windows 7 repair

    Information

    This will show how to do a repair of difficulty your currently installed Windows 7 upgrade installation and to preserve your user accounts, data, programs and drivers of the system.

    THE ELEMENTS THAT WILL BE RESET TO DEFAULT OR AFFECTED:

    • Sounds
    • Services
    • Visual effects settings
    • Device drivers - make sure you have these practice to reinstall. They don't always stay after the installation of repair (upgrade).
    • You may lose your themes custom because no permisions on the old themes. Go to the themes folder hidden in C:/Users /(User-Name)/AppData/Local/Microsoft/Windows/themes, then take ownership of the folder themes and you have now all your themes back.
    • It was reported that you can also lose your Media Center gadget after doing the repair facility.

    WARNING

      • You will not be able to do a repair installation of upgrade mode without failure.
      • Installation of Windows 7 DVD that allows you to do repair installation with must be the same or more recent Windows 7 update (ex: level updates Windows or MS) that the currently installed Windows 7. If the DVD is an older version, then you can not do a repair with her installation.
      • You must have at least 8.87 GB of free space, more if you have a larger facility, on the hard drive that Windows 7 is installed on do a repair installation.

    Here's how:

    1. start Windows 7 and log on to an administrator account.

    2 disable the 3rd firewall, antivirus or other security program to avoid what it possibly to prevent the installation of repair of Windows 7 upgrade.

    3. place your installation of Windows 7 in DVD Player DVD while in Windows 7 (step 1) and click on the option of setup.exe run in the AutoPlay window in the currently installed Windows 7. (See screenshot below)

    NOTE: If the AutoPlay window does not open, then open the folder on the drive in the computer and run the setup.exe file.

    4. click on the install button now to start the installation. (See screenshot below)

    5. clear the I want to help make Windows installation better area (unless you want), then click the go online to get the latest updates for the installation option. (See screenshot below)

    6. Windows 7 will now check online and install the available installation updates. (See screenshots below)

    7. check the I accept the license terms box, and click Next. (See screenshot below)

    8. click on the upgrade option. (See screenshot below)

    9. installation of Windows 7 will now begin. (See screenshot below)

    NOTE: During the installation, your screen may flash, and the computer will restart several times.

    10. after the final reboot, you will see this screen for a while. (See screenshot below)

    11. Enter your Windows 7 product key number. (See screenshot below step 12)

    12. uncheck the automatically activate Windows when I'm online box unchecked, and then click the next button. (See screenshot below)

    NOTE: You can activate Windows 7 later after you make sure that it runs correctly. (See step 19 below)

    If you chose to automatically activate Windows online when you set up your computer, automatic activation begins trying to activate your copy of Windows three days after you sign in for the first time.

    13. click on the settings recommended. (See screenshot below)

    14 select your time zone and set your date and time settings, and then click the next button. (See screenshot below)

    15. click on the option for the location of your computer select the settings appropriate to apply to this place network location type. (See screenshot below)

    NOTE: It is best to choose a Public place for the best security.

    16 Windows 7 will now prepare your desktop so that it starts. (See screenshots below)

    17 check if you are missing files from the user. If you are, then you can copy them from the C:\Windows.old or protected which is hidden, C:\$INPLACE.~TR operating system and files backup C:\WINDOWS.~Q. (see screenshot below)

    18. If the power goes out step 17, then you can run Disk Cleanup. You will need to click on the own key file system first and then check that the files ignored by Windows upgrade previous installations of Windows and Windows upgrade log files boxes. (See screenshot below)

    NOTE: This will remove files C:\Windows.old, C:\$INPLACE.~TR, and C:\WINDOWS.~Q from step 17 above.

    19 refresh your performance Windows (WEI) index score.

    20. when completed, all you need to do is to activate Windows 7.

    Let us know if this helps,

    Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • FCAC's services may not start automatically

    I had to manually start two services < DB_NAME > _RPT, < DB_NAME > _SRV on a RAC. It has been for a while now, because it happened after the interview. Looking for a way to autostart.

       

    All services are already enabled by

    srvctl enable service d < database name > < service > s

    Also checked 

    srvctl config service d < database name > < service > s

    and it does not show "The Service is activated".

    'crsctl enable the crs' and checked

    / etc/Oracle/scls_scr/RAC1/root/crsstart, also shows "enable".

    But services may not start automatically...

    The database is Active data guard and services on the primary database always start automatic without problem.


    Thank you!

    Hi David,

    This service does not start until the role of the service is changed to physical_standby, as shown below:

    srvctl config service d s _RPT

    Service name: _RPT

    The service is activated

    Server pool: __RPT

    Cardinality: 4

    Disconnect: false

    The service role: PRIMARY

    Management policy: AUTOMATIC

    DTC transaction: false

    Notifications of AQ HA: fake

    Failover type: NONE

    Failover method: NONE

    TAF failover attempts: 0

    TAF failover time: 0

    Objective connection of balancing: LONG

    Goal of balancing Runtime: NO

    Governed by a policy JOB: NONE

    Edition:

    Favorite instances: 1,2,3,4

    Available forums:

    So change to this service as:

    srvctl change service d s _RPT-l physical_standby

    With this setting, your database will this service upwards and running when it is in this role, but do not forget that when the ADG to be the principal changes, this service will not be upward, then you must set up another GOLD make this static service on the listener.

    Kind regards.

  • Listener (and the database instance) does not start automatically: ORA-12514: TNS:listener does not currently of service requested in connect descriptor

    Hi all... I am a newbie with oracle database.,.

    I have the problem of monitoring:

    I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.

    I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.

    Installation-) before and during the hostname is localhost.

    (-) After the installation, I changed the host name in VMCentOS

    From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.

    When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:

    ORA-12514: TNS:listener is not currently of service requested in connect descriptor

    I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!

    Can someone tell me if, maybe, the problem is with the host has changed? ... and why?

    P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.

    Hello

    It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.

    When you install EA or there is no script that starts the database at startup.

    If you wish, you can create by yourself. For example search for instructions to Google how to create script.

    Kind regards

    Jari

  • VC Service does not start automatically

    Hi, this weekend I rebooted my server VC (on vm)

    The service is not started automatically because SQL server has not been started fast enough (on the same virtual machine)

    After a few seconds, the sql base was, but too late for the VC service.

    Is there a tips to start the VC service after the departure of the basic sql?

    Concerning

    See this VMware KB:

    http://KB.VMware.com/kb/1007669

    André

  • Why pictures start automatically on reboot? I never use it and it does not appear in the startup folder.

    Why photos starts automatically when you restart. It is NOT in the folder.so of starting, why what is happening? I never use photos, so it's a loss of memory perfectly!

    Perhaps you have a device with linked images that attempts to import Photos?

    Also where the startup folder did you check?

  • the invocation service does not start automatically

    Hi, I set up call service starts automatically as below, however, it has not worked. And I need application code to get the service from CacheFactory.getService ("MyInvocationService") to start it... why it is so? Thank you.

    Henry

    < invocation-plan >
    < scheme name > example-invocation < / system-name >
    < service name > MyInvocationService < / service-name >
    < number > 10 threads < / thread count >
    < system-property autostart = "tangosol.coherence.invocation.autostart" > true < / autostart >
    < / invocation-plan >

    922963 wrote:
    Hi Robert,.

    Thank you. Yes, I have my own main class. In order to take advantage of the beginning and the monitor etc, already provided by DefaultCacheServer, my hand class should DefaultCacheServer? or a better way to do it?

    Henry

    Hi Henry,.

    Simply call DefaultCacheServer.start () which starts the services (but does not start the thread of analysis that restarts the services of consistency if the node was chased from the cluster automatically).

    If you want the thread of analysis, too, then, in my opinion, you can call DefaultCacheServer.startDaemon ().

    Stop the services and the thread of analysis is DefaultCacheServer.shutdown ().

    Best regards

    Robert

  • The CSSD does not start automatically on the Non-RAC - AIX 5 L

    Hi all

    Database: Oracle 10.2.0.4
    AIX 5.3 TL 10 OS

    I am facing a problem with the Non-RAC/Clusterware CSSD.

    When we restarted the CSSD service server does not start automatically, and there is no relevant messages in the log files of the CSSD.

    Run 'localconfig reset $ORACLE_HOME', to run but does not start the CSSD.

    Running 'start /etc/init.cssd' - does not work, nothing happens when you throw

    I manually ran "file/etc / init.cssd to run" and the start of the CSSD (ossd.bin) service without errors.

    No error on errpt in AIX.

    I opened a SR, but I'm waiting for response from the Oracle.

    Hello

    I think that this problem is not with Oracle, but in AIX.

    It may be that a process that starts at the start is the other process. You need to identify what application/process.

    Check the process in inittab who are already active and which are inactive, they must be active.

    A clue: is very common process that is launched in standby mode keep the boot server.

    wait
When the init command enters the run level that matches the entry's run level,
start the process and wait for its termination.
All subsequent reads of the /etc/inittab file while the init
command is in the same run level will cause the init command to ignore this entry.

    http://publib.Boulder.IBM.com/InfoCenter/AIX/V6R1/index.jsp?topic=/com.IBM.AIX.files/doc/aixfiles/inittab.htm

    Kind regards
    Levi Pereira

  • CD player does not start automatically

    HP Presario CQ71-140EA;  Windows 7 Professional.

    When you insert a CD into the CD player, that player does not start automatically.

    I have to launch Windows Media Player or iTunes before CD games.  Any ideas please?

    Hello:

    Please see if this tutorial will solve your problem.

    http://windows7support247.blogspot.com/2010/12/how-to-enable-or-disable-Autorun-for.html

    Paul

  • How to get Skype to does NOT start automatically

    I just installed Skype on my new computer, and every time I turn on my computer, Skype on startup. I don't want to start up unless I use it. Is there a way to make sure that Skype does not start automatically? I'm starting to irritated at having to leave the program whenever I turn on my computer.

    In Skype, go to tools-> Options-> General settings. Uncheck the option: "Start Skype when I start Windows". Record. Quit Skype and restart your computer.

  • Wireless zero configuration does not start automatically. I need to run it whenever I restart the computer

    Wireless zero configuration does not start automatically.i have to start whenever I restart the computer. I have a laptop dell inspiron

    Moved from feedback

    Original title: WiFi

    Hello

    1. what version of Windows is installed on the computer?

    2. is it works much earlier?

    3 have there been recent changes made on the computer before the show?

    To activate the Configuration service automatic wireless so it starts automatically, click the Start button. Select settings , then select Control Panel.

    If you use Windows XP display, select the performance and Maintenance category, and then select Administrative Tools.

    If you use Classic view, and then select Administrative Tools. In the left pane, click the Services icon. Click the automatic Wireless Configuration icon in the right pane, and change the box Startup Type to Automatic.

    This parameter will be defined the service starts automatically at boot time. Then click on the Start button to start the Wireless Auto Configuration service zero wireless and click on the OK button.

    The automatic Wireless Configuration can also be started and stopped from a command prompt.

    To start the automatic Wireless Configuration, run the following command:

    net start wzcsvc

    To stop the automatic Wireless Configuration, run the following command:

    net stop wzcsvc

    For more information, see the link.

    Wireless Zero Configuration Reference

    Please post back with the results and we will be happy to help you further.

  • my CD does not start automatically

    my DVD player does not start automatically

    Perhaps you are referring to CD/DVD AutoPlay? Check out this article:

    [SOLVED] The Autorun feature or the AutoPlay feature does not work when you insert a CD-ROM into the CD drive:
    http://support.Microsoft.com/kb/330135

    Ramesh Srinivasan . The Winhelponline Blog
    Microsoft MVP, Windows desktop experience

  • MOM opened the narrator and now it starts automatically when it restarts or logs and new. How can she stop it?

    Hi, I have problems with my PC (Windows Vista) mothers. Margot opened the narrator and now it starts automatically when it restarts or logs and new. How can she stop it? I tried msconfig but can't find it. It is very annoying as Margot does not use it and need to close whenever it connects. I tried everything to stop it in the help files.
    Thank you for your time, Kaye Young... :)

    See how the Narrator toggle in Vista

Maybe you are looking for