session active ftp for bluetooth problem

Similar Questions

• Microsoft Keyboard Elite for Bluetooth problem

  I have had and used the Elite and Intellimouse keyboard for many years.  My keyboard has recently developed a problem. I am able to recognize and install it, but it does not 'Connected', such as the IntelliMouse. Or it does not show recently used. The only information shown in the Bluetooth Panel is Microsoft Keyboard and password activated.

  The mouse shows Microsoft Mouse, no password, connected.

  When I select the keyboard and click on properties, then on services, the drivers for keyboard, mice, etc (HID) box is not checked. I check it, then hit apply, and I get the error Service Bluetooth "access denied."

  I was able to install the keyboard on another computer and it works fine.  The support of bluetooth and bluetooth services seem to work fine as well.  I've uninstalled and reinstalled the drivers for the keyboard and the mouse and the mouse still works fine but no resolution on the keyboard. I am running XP SP3 on my computer, and it has all the latest updates and drivers that I can find.  In addition, I was the software updates when the keyboard stop working.  Very well, I was typing a moment and the next day, that he had just left.

  Suggestions on how to proceed?

  After almost 7 months together trying to figure out this I finally got mine to work! After reading the post from Yawp73, I didn't uninstall my old version of Microsoft Keyboard Elite for Bluetooth and reinstalled the latest version of Microsoft. When I went to add devices and I saw the keyboard icon, click on it instead and press 'next' to put in the passcode, I right click it and went to properties, then services and CHECKED the box for the drivers for keyboard, mice, etc.. After hitting applied, my elite keyboard started working without even putting a pass code! YES! THANKS Yawp73!  I really hope that it works for everyone because this question drove me INSANE! Good luck!!!

• Active FTP problem between Checkpoint and Cisco PIX

  Hello

  I am facing a strange problem.

  Many of our customers have achieved a Checkpoint FW-1/VPN-1 4.1 SP6 (the last before NG). When they try to connect to an FTP server that is located behind a Cisco PIX firewall, they are not able to transfer data: the connection is established, the authentication to follow, but at the stage of the 'LIST' the connection 'freeze' and the user must close the FTP client.

  Users are facing this problem ONLY in Active mode: passive mode works very well. Turn passive mode FTP client isn't acceptable workaround for most of my clients.

  The problem seems to be related only to the firewall Cisco PIX and active FTP.

  Please, what is someone encountered the same problem?

  Could someone give me any help?

  Thank you in advance.

  Paolo

  Yes it is a (global) problem, even with the last checkpoint firewalls. What happens with Active FTP, it's that each command (get, list, etc.) causes another log on the client (source port) to the server on port 21. If you run netstat from the customer you can check this for yourself.

  What normally happens, with HTTP, FTP, telnet, which have are, it's that the client makes a connection to port 21, 23 etc then returns with a port source such as 1936, 1980, 3000, etc..

  Connect problem with statefull firewall is they do not allow multiple sessions control port number on a destination, as well as a source port can be bound to a destination port, in this case, 21 for FTP. I Don t see it changed, an extreme security risk any time soon, since it s, someone else might be hopping session and block this type of traffic, it's what the stateful firewall are all about and FTP servers are problably the machines more pirated on the planet.

  You´ve mentioned the workaround solution, unfortunately that s the only way, change your passive customers, I think that Unix/Linux customers have a problem with this, change your FTP server can also help, there are multiple servers that can be configured to disable Active FTP, I wouldn know exactly, I only network & firewall... maybe someone else can move on this...

• Problem restoring last Session in Firefox. It restores the last session without asking for password

  whenever computer stops because of the cut to the top or any other reason while you work in Mozilla Firefox as the use of Facebook. When you turn on the computer and open Firefox it stores the session, without asking for password or username that the effects seriously privacy.i has been using Facebook on Mozilla and my computer shuts down after a few minutes, another has turned on the computer and it went into my account on Facebook because of the last session of restoration. Please, do something about it. This is a larger problem in Firefox

  You can set the browser.sessionstore.privacy_level pref 2 (never) or 1 (no HTTPS, default in the Firefox 3 versions) on the topic: config page to disable the registration of cookies via session restore.

  • http://KB.mozillazine.org/browser.sessionstore.privacy_level

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed see the bold (user set).
  • Preferences you can restore the default value or change via the context menu.

• The TOSHIBA for Bluetooth ACPI driver update failed

  Hi all

  I have a P870 running on Windows 7 & until recently BT worked fine, now it doesn't.

  When I tried to download the latest version of the driver it says that I have the latest version of the driver.
  He also says that the device is functioning properly.

  It does not recognize my S4 where before he did.
  I now can not get it to pair because he does not see.

  When I did the last update of MS that I noticed the results put BT update failed, as shown below.

  Any ideas on a fix would be appreciated.

  The TOSHIBA for Bluetooth ACPI driver update
  Installation date: 08/08/2015-09:37
  Installation status: failed
  Error details: Code 80246005
  Update type: recommended

  This driver has been provided by TOSHIBA for the support of Bluetooth ACPI

  More information:
  http://sysdev.Microsoft.com/support/default.aspx

  Help and Support:
  http://support.Microsoft.com/select/?target=hub

  BT is activated using the function keys?

  What is the status of the Bluetooth technology in Device Manager?
  You see errors, some yellow exclamation?

  What you can do is use provided by the windows system restore and backup option and return to the point of time at the beginning, before the update have been installed...
  No doubt this has problem of BT

• Need driver for Bluetooth device

  When I tried to connect my phone with my computer ask for Bluetooth for Windows Vista device driver trying to find driver but can't. When I check the Device Manager two yellow icon of the device that is "Bluetooth device" but I could not find the driver for this.

  Can someone help me on this problem? THX

  Hello Mestu

  Can you please tell us which laptop model you have? You have activated BT until you have connected your phone?

• I need help for bluetooth on my DELL Inspiron 530 s

  I have bluetooth on my computer, it stands on my control panel, but whenever I'm trying to connect my phone with my computer it does not? Also whenever I click on bluetooth settings nothing appears? Can someone help me please?

  Hello

  Be sure and check with the phone manufacturer, Support from Dell, their documentation Support Online
  the pilots and the Dell Forums for known problems.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ============================================================

  Associate a device Bluetooth with Windows 7 [how-to]
  http://www.groovypost.com/HOWTO/Microsoft/pair-a-Bluetooth-device-with-Windows-7/

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Could not uninstall 'Intel (r) PROSet/Wireless Software for Bluetooth (r) technology.

  Hi Experts,

  I'm trying to upgrade my notebook windows 7 ultimate Vaio SVS151190X to windows 8 and make the following message.

  "

  Intel (r) PROSet/Wireless Software for Bluetooth (r) technology

  Uninstall this application now because it is not compatible with Windows 8.

  Not if same answer, I click the button uninstall next to this message.

  I couldn't uninstall it to uninstall a program in Control Panel either!  It gives a message to make sure that the adapter is installed and activated.

  I see Google, a lot of people have this problem and some of them got to be resolved through "a Fixit button to http://support.microsoft.com/kb/2438651. But this link doesn't work anymore! Did Microsoft changed this link?

  Any help is greatly appreciated. I'm stuck in the Middle now!

  Thank you

  Palcok thanks for the reply.

  Yes I checked the sony website and my system is supported.

  My problem is now solved. I went to the Intel Web site and updated the driver and then it let me uninstall.

  Thanks again

• EOFException when downloading files from the server FTP of Bluetooth

  Hello, I am developing an application that downloads a file from a FTP of Bluetooth server. If I use this code to download a list of files works fine, but if I use the same code to download a real file it doesn't. I tried using plain text, image, video (mp4 and 3gp) and audio with the same result. If I install my app in a Nokia (N95) or a Motorola (K3) works perfectly, but I can't get it to work on my Blackberry 8310
  The problem in the BlackBerry is an EOFException when reading the first byte, no 1 is returned to indicate the end of the file, but an EOFException. BlackBerry Handheld Software (v4.2.2.173)

  This is the code to get the InputStream:

  public InputStream getFileInputStream(ClientSession conn, Operation op, String stFile, String stType) throws IOException {        InputStream inputStream = null;        byte[] FBUUID = {(byte) 0xF9, (byte) 0xEC, (byte) 0x7B, (byte) 0xC4, (byte) 0x95,                   (byte) 0x3C, (byte) 0x11, (byte) 0xD2, (byte) 0x98, (byte) 0x4E, (byte) 0x52, (byte) 0x54,                   (byte) 0x00, (byte) 0xDC, (byte) 0x9E, (byte) 0x09 };        String file = stFile;        String type = stType;        if (file==null) file="";        if (type==null) type="";        //Prepare the headers for the OBEX commands        HeaderSet header = conn.createHeaderSet();        header.setHeader(HeaderSet.TARGET, FBUUID);        //Send OBEX Connect        HeaderSet response = conn.connect(header);        //In order to go the desired folder the OBEX SETPATH command is beeing used        //Prepare the header for the SETPATH commad        header = conn.createHeaderSet();        //folder_name is set to the name of the desired folder        //if left blank the root folder will be used        String folder_name = "";        header.setHeader(HeaderSet.NAME, folder_name);        //Send the SETPATH command        HeaderSet result = conn.setPath(header, false, false);
  
          //Prepare the header for the GET command        header = conn.createHeaderSet();        header.setHeader(HeaderSet.NAME, file);        header.setHeader(HeaderSet.TYPE, type);        op = conn.get(header);        //The selected file will be send to the operation's input stream        inputStream = op.openInputStream();        return inputStream;    }
  

  And the call:

  InputStream in = getFileInputStream(conn, op, "text.txt", "text/plain");
  

  The same call that works perfectly for the list of files (in BlackBerry too):

  InputStream in = getFileInputStream(conn, op, "", "x-obex/folder-listing");
  

  This call produces an xml file which can be read perfectly by any phone.

  Any help is very appreciated!

  Concerning

  Solved. The problem is to use >-1 instead of ! =-1

• 10 IOS leading to the Bluetooth problem

  Before download IOS 10, I've never known a Bluetooth problem when using my Ford truck.

  Now, when I get a call, the caller does not hear me and I can't hear the caller. If I have my phone in hand and I change the Bluetooth audio to the speaker of the iPhone or handheld and then change it back to my truck, it works very well.

  When I call my truck, using Bluetooth, all parties can hear one another, but incoming calls only on me.

  I tried to reset the network settings, non-couplage coupling phone/truck and restart the phone. Restarting seems to work for the next incoming call, and then it starts again.

  Any help would be great. I received an incoming call on my phone about 10 minutes before you download the update of IOS. The following call (update to the post), the problem is presented.

  Thank you.

  Try to get help from this article, get help to connect an accessory with your iPad, iPhone or iPod touch - Apple Support Bluetooth

• I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  I have a question please. Are the activation of wifi, Bluetooth and 3G while I'm outdoor consume the battery of my iPhone (6 s) and reduce its life expectancy?

  If you want your Apple Watch to stay connected to the phone, you need to keep compatible BlueTooth.

  All functions of the phone will use up the battery life. Some things more than others. Screen brightness, low cell signal strength and location services are major culprits. If you are having battery problems, see this article:

  http://www.scottyloveless.com/blog/2014/the-ultimate-guide-to-solving-iOS-batter y-drain

  I don't know what it means being out of doors has to do with the question.

• Bluetooth problem X 870-119 Qosmio with mouse Logitech M557

  I recently bought a mouse Logitech M557 bluetooth use with my Qosmio, which is updated for Windows 10. However, I found the mouse LAGS constantly. I have uninstalled/reinstalled the bluetooth software, but it does not solve the problem. I tried the mouse on another laptop (Portege R830), and the operation is perfect. The Portege is also updated Windows 10 so something is wrong with the bluetooth on the Qosmio.

  Installed bluetooth driver is 18.1.1525.1445, dated June 2015 and the version installed when you update the driver in Device Manager device. I have not found a driver for bluetooth of Intel on the Toshiba site to my latptop, in fact everything that I could find are packages for Realtek and Atheros devices.

  Any ideas?

  Try turning off wifi and ethernet with cable, with a lot of intel controllers BT, they are also controlled by the wifi card. If this solves the problem, you may have to upgrade your WLAN drivers (However none is available for Windows 10 OS yet)

• EliteDesk 800 G2 Mini 35W: EliteDesk 800 G2 Mini 35W - Bluetooth problems

  I'm trying to get this camera photographed with our base image 64-bit Windows 7 Enterprise. I get the following errors:

  • In Device Manager, the Generic Bluetooth adapter is to throw the error "Windows has stopped this device because it has reported problems (Code 43)"
  • In case the Viewer, in Windows logs - system, I see the following pop up every 20 seconds or so: "the local Bluetooth adapter ran out of undetermined manner and will not be used. The driver has been unloaded. "EventID is 17 and the Source is BTHUSB.

  I tried several different drivers, both HP and Intel and applied two patches (KB982046 and KB980396), from various other recommendations of Web sites. I tried the recommendations repeatedly repeated re-disabling/enabling; Uninstall/scan for hardware changes & pilots applying; closing (unplug) for several minutes and restart System. Currently, I'm doing a request only the USB and NETWORK card drivers and am still seeing this problem, but I also applied all the drivers with no difference.

  A few questions:

  • Has anyone else seen elsewhere and fixed it?
  • USB drivers would be the issue? I use USB drivers otherwise, I can't use my keyboard and mouse.
  • Any other suggestions?

  Hello:

  Try the W7 x 64 driver directly from Intel.  2nd pilot down on the left side of the page for 64-bit.

  https://Downloadcenter.Intel.com/download/25838/Intel-PROSet-Wireless-software-for-Bluetooth-technology-for-Windows-7-?product=86068

• Anyone know a fix for the problem of gel (Xoom)

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  Hey everybody. Does anyone know a fix for the problem of gel in the Xoom? Once from time to time, it hangs for a few minutes, and then "goes back to work. It gets really annoying.

  
  

  Greeting debuisson,

  Welcome to the Support Forums!

  Are you using the browser (Google) stock on a very regular or frequent basis? If Yes, brief gel is a known problem due to a memory leak in the stock browser that Google has not yet difficult (there are under all versions of Android OS to date). Basically, the continuous browser to consume your memory over time, based on the sites you visit and the length of time, it is active, which makes the system pause/freeze periodically. There are two ways to deal with this, either install a third-party browser (such as FireFox, Dolphin, Opera, Chrome, etc.) or if you really prefer the stock browser, restart your Xoom every two days (to clear/free memory and cache).

  Apart from the browser, a third party application of thugs can cause this as well (especially if there are conflicts). The rule of this point, try to use a surveillance (as SystemPanel) application to monitor what is active in memory when you encounter the gel. Close active applications one by one until your gel goes and then locate the updated versions.

  Please let me know what you find.

  -Doc

• iPhone 6 will not pair to lg Mandine for bluetooth

  My iphone 6 will not pair to lg Mandine for bluetooth. Called LG, but they said to call apple. Any suggestions why Iphone does not see the soundbar

  Hi, jparsons2.

  Please visit Apple support communities.

  I understand that you are experiencing a problem with Bluetooth pairing and your Soundbar.  If you have not contacted us via phone already, try to go through the troubleshooting steps in the following article.

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch

  See you soon