"Session Fixation error" - cannot burn CD/DVD with Qosmio F45-AV11

Similar Questions

• Internal software error PrE11 burn to DVD

  Reference Dell Quad processor C:250GHD (pre here) D: 600GHD w / free 400 G (project here).  Converted from 60 movies of 13 minutes (avg) Reg 8 & 8 Supreme via projector, movie converter, Pyro has / V Linc, in computer in an AVI file.  Now burn to DVD with menu.  With the help of 5 files at a time. always less than 1 h, with main Start Menu & Stop markers on each clip file.  Do not spend time editing, use only the Smart Fix on all files.

  Some burn very well, but some give me the following error after that 99 percent complete on burn progress bar:

  "Software internal error: \Vobulator\Block Planner\Block Planner.cpp, line 215.

  There, it will stay frozen until I have the stop, restart and sometimes I restart and it completes the burning process, and sometimes he repeats the error.  It takes about 2-3 hours to find out.

  Can you tell me what it is?  Maybe I can avoid something.

  The error of Vobulator told me that things are bad, just at the end (as your % indicates), and it has to do with the progrma is not able to create the necessary video DVD structure.

  First thing I'd do, look to see if you have to stop at the end of the timeline marker. If so, remove that and test again.

  Good luck

  Hunt

• I try to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I like it's too big - it is possible to use SP, SLP. ED or when burning on a DVD

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  • I am trying to burn a DVD with Windows DVD maker and the tiles are about 3 hours or so in total and I thought it's too big – is it possible to use SP, SLP or ED when burning to a DVD problem

  ==========================================
  The following article shows 150 minutes on a single DVD layer, but
  I'd be surprised if it always worked this way. In any case...
  Perhaps you could use a DVD double layer if your burner will handle it.

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

  Splitting the project between 2 or 3 DVD might be the best option.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• My computer turns off when I try to burn a DVD with Windows DVD Maker__

  My computer turns off if I try to burn a DVD with Windows DVD Maker.  It was working fine and now it will not get past a certain percentage without stop.  What can I do?

  Hello Timbay1,

  Thanks for posting on the Microsoft answers Forum.

  What has changed in your environment, as it was working before and now does not work? Have you installed any new software or updates?
  It can be 3rd party software created a conflict with your codecs and you need to re - register.

  You could check and see if you have compatible Codecs installed in Windows Vista.
  or you can try to use the codec for Vista Codec Pack - pack

  There are other 3rd party codecs but I can't guarantee that they will work with Windows Vista.

  Please answer back with an update.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• This program, or how do you burn a DVD with a project of first cc pro.

  This program, or how do you burn a DVD with a project of first pro cc?
  
  

  Yet, but you will need to download it first.

  CS6 still not installed with creative cloud

• How to burn a DVD with two audio tracks?

  There is a project with the original video and a second audio track with the music. I want to burn a DVD with two audio tracks. During playback of the DVD, you should be able to select the audio track 1 (original sound) or audio track 2 (music). With Adobe Encore DVD, it was easy to set up two audio tracks and burn the DVD. It is posible to do the same of Prime Minister 11 Adobe elements?

  Thank you

  Jordi

  Welcome to the forum.

  Unfortunately, pre does not allow additional Audio tracks, creating.

  I use Adobe Encore for this, but it is only available bundled with Premiere Pro. I don't know if others, third, all authoring apps., as Sony DVD Architect features can do, but I guess they can. The specifications of the Architect DVD should have this information, and as it is quite common in creation complete. apps, I expect that it has this capability.

  If you go with this program, our MOD, Steve Grisetti, wrote a very good book about DVD Architect, and it is available at Muvipix.com.

  Good luck

  Hunt

• help cannot burn the file with audio ac-3 to dvd

  HELP A WHILE SO FAR

  Hello

  Thank you for the update from us.

  We are sorry for the inconvenience. I'll probably help you with that.

  Please provide us with more information to better understand the issue.

  1. Codec packs installed and when that you installed?
  2. Has the codec packs that is supported ac3 format?
  3. What other DVD burning software have you tried?

  For the moment, please try the steps below and check them off, it helps to solve the problem

  Step 1.

  I suggest that you try to play AVI files in Windows Media Player, check if he plays well. If so, I recommend that you try to burn from in using Windows Media Player and check if it works.

  For more information, please see the link on burn a CD or DVD in Windows Media Playerbelow.

  burn-cd-dvd-media-player#1TC=windows-7 http://Windows.Microsoft.com/en-us/Windows/

  If the steps above does not resolve the issue please try the steps below.

  Step 2.

  I would recommend you provide through the suggestion of rhylcolinjones of the sub thread link which looks like the similar question, you are faced with.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/Windows-DVD-Maker-no-sound/544a3ce8-2617-4FA0-9f5e-4566f334bd5f

  Hope this information can help, please post us with the State, we will be happy to help you.

  Thank you.

• Can't burn any DVDs with my Satellite A660

  I have a DVD burn on my laptop Satellite A660 number but I can still play DVDs with full transparency.

  I caught the error in the disk creator.

  http://S10.postimg.org/wuzwxi9c9/DVD_Player.jpg

  I tried 5-6 DVD and all give the same error.

  Try to clean the lens ODD.

  Have you tested with different burning applications?

• Problem to burn a DVD with Windows Live Movie Maker

  I created a video in Windows Live Movie Maker.  He plays well there.  But when I try to burn a DVD in Windows DVD Maker it is shortened and disordered.
  I have to disable filters or codecs?  If so how do know which ones to stop and how do I disable them?

  Hello

  ·         You try to burn the Windows Live Movie Maker on DVD maker project file?

  ·         What is the format of the file you are trying to burn?

  ·         You get the error message?

  Method 1:

  See the article, and then select the settings you want to use to create a DVD that fits your needs

  Change Windows DVD Maker DVD-Video settings

  http://Windows.Microsoft.com/en-us/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  Method 2:

  Access this link which contains solutions to some common problems with burning DVDs and check if you can solve the problem.

  Solve problems with creating a DVD-video using Windows DVD creation

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Added help for Windows Live Movie Maker, you can post your query to the Windows Live Movie Maker Solution Center.

  http://www.windowslivehelp.com/product.aspx?ProductID=5

  Hope this information helps.

• Error when burning a DVD DVD Maker - "impossible to crΘer the cataleptic failure of dvd.

  Original title: Windows DVD maker
  I get the error (failed to create the cataleptic failure of dvd)

  Hello

  I suggest that you try reducing the burn speed in the creation of DVD and check if it works.
  Choose a speed slower burn to your DVD recorder as follows:

  1. return to the page Add images and videos on the DVD and then click onOptions.
  2. in the DVD burning speed box, selectmedium orslow.

  Also, make sure that you save the movie on the computer and try to burn it.
  If the previous step fails, then I suggest that you uninstall any third-party DVD burning software from the computer and check if it works.

  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Change Windows DVD Maker DVD-Video settings:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Burn a DVD-video disc:
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I burn a DVD with surround sound 5.1 PE10?

  I'm experimenting PE10 to see if it does what I want.

  I created a small project based on the HD AVCHD 5.1 project preset and have imported a few clips with ac3 for audio files.

  When I play the videos in the application, the sound surround works very well.

  I burned the project on DVD, but when I play the DVD on my DVD drive (plugged into stereo) I don't get sound no go my surround speakers, only forward and Center/subwoofer speakers.

  I tried other presets of project and the creation of a 5.1 audio channel in importing an ac3 file and adding especially tracks.  The problem with this is that the sound surround sound does not work in the application, and I checked the audio preferences and played with the settings.

  So, my question is if I can burn a project with 5.1 audio on DVD to be played on a DVD player?

  Unfortunately, he cannot encode pre DD 5.1 SS, but only import who and then mixing stereo (2 channels).

  PrPro even need optional Minnetonka Audio / over-codes SS SD plugin 5.1 (~ $ 250), do it. PrPro, we can create a DD 5.1 SS DVD or BD, through recall (the included authoring application), but yet will write ONLY the DD 5.1 SS AC3 (through than SurCode plugin) and can not watch the DD 5.1 SS, but PrPro can, so monitoring all should be done before yet. Yet can also write other extra Audio streams, such as DTS, ProLogic, etc., but who MUST be imported into the still and SHOULD be 100% DVD/BD-compliant in all respects.

  Good luck

  Hunt

• Satellite A30-232: SD-R6112 cannot burn CD/DVD

  Hello

  After you have reinstalled Win XP, I can't burn CD/DVDs. The drive is a SD-R6112. It is only recognized as a CD player.
  All programs have been relocated with the CD that came with the computer. I tried flashing the drive, the installation of SP2, but without success.

  Everything worked fine prior to the relocation.
  Any idea?

  Hello

  Please enter the properties of the CD/DVD drive! Somewhere in the properties of the drive (can't remember where), you should find options to enable recording on this device.

• Burn a DVD with "disk utility".

  Before El Capitan (10.11.2), I was able to burn a DVD using "disk utility".  Here are the instructions that I used.  Disk utility has now a new version Version 15.0 (1511.3) and the statement no longer work.  Can anyone update these instructions?

  Copy DVD

  Follow these instructions to make a copy of your DVD unprotected:

  Insert your DVD into your Mac. Most Macs will automatically launch the DVD player. Once he starts, he gave up. You should see your DVD drive mounted on your desktop.

  Open disk utility (Applications > utilities). Select the DVD drive in the list on the left. You will notice that there are two DVD icons - select the one slightly indented (this is the DVD itself, while the first is the drive).

  Click on "New Image" in the main window of disk utility.

  Choose a name and a destination in the window "Save as...". ». Don't forget that your destination should have enough space to copy the whole DVD, which can be more than four concerts.

  In the window "Save as...". ', to ensure that the selection 'Format of Image' is set to ' CD/DVD Master' and the selection of "Encryption" is set to 'none '. Click Save.

  After you have copied the DVD in your destination drive, return to disk utility. Your new disk Image will appear in the list on the left side of the disk utility window. The original disc of DVD on your Mac.

  Insert a DVD disc that is accessible by writing in your Mac. Select your disk Image created in the list on the left side of the disk utility window. Click on "Burn" in the main window of disk utility. Choose your burn speed and if you want to check the data burned.

  You will receive confirmation once you the DVD are engraved with success and you are all set with a new copy of your DVD drive. Just save your new disk Image and you can make a copy whenever you may need.

  That is right. Apple has removed this feature FROM.

  You can do it from the Finder

  http://osxdaily.com/2015/11/22/burn-disc-images-OS-x-Finder/

• Cannot open the DVD with audio decoder AC-3 on the satellite series

  Hello!
  If I try to open a dvd with ac3 encoding on that, I get an error message saying "it is impossible to start the AC-3 audio decoder, because the moonlight odio dekoda filter is not enabled. "Please, send to: [email protected].
  But the address of the Web site does not load and no response on the e-mail address.

  If someone has had this problem and how can I solve this problem? Please help a novice.
  Many thanks Ste

  Why you n t use other programs like WinDVD or PowerDVD to play the DVD and watch DVD movies?
  The WinDVD must be installed on most of the newer Toshiba laptops.

• Satellite P20: Device DVD Player reads only the DVD but cannot burn CD & DVD

  Hello

  I have a toshiba P20, and I'm having a lot of problems with it. One of them is my DVD UJ811. I don't really know what is happening, the drive was already replaced and a few weeks later, it was exactly like the front, and the service provider made me pay almost 70EUR for a budget of 400EUR rejected.

  I would like to know what really should do, I can't read the CD and I can not burn CD/DVDs, I can just read DVDs, nothing else.

  I have seen some forums on the net, too many people in the world has the same problem I have and I really need to know what is the best solution for me.
  Thank you

  Hello Rafael

  I'm very surprised by your post it here because I've used Satellite P20-303 (a red) about two years. Laptop is now used by my brother and it works perfectly. I don't really know what problems you have, but I never noticed anything suspicious. Up to now I removed the cooling Grill on the bottom twice to clean the unit, and that's all. After that laptop computer cleanup runs a lot more quiet then before.

  Back to ad: I have to be honest and say that I traded with TEAC DV - W22E DVD - rom. original drive was DVD - RW and TEAC DV-W22E DVD-RAM. My brother use it pretty extensively, but until now there is no problem at all.

  I don't really know what the service is doing, but if possible replace the drive TEAC one. I can tell you with certainty, it works very well. Moreover, according to the description of your problem, I am sure that the drive is faulty.
  You can replace one. It's very simple to do.