Session of the monitor on the chennel Port in Dell P6448

Similar Questions

• HP laptop - 15-f233wm: external monitor connected to the HDMI port has video but NO sound

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  Ernie4576 wrote:
  

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  By adopting the option monitor MHDI PC/AV Pc mode will solve the problem, I use a unit screen color Samsung TYPE model / MODEL: C27F591FD (N).

  The device playback option on the care of the portable property are all set to default, Intel C27f591 display sound card works fine!

• How to connect the new monitor dvi to vga port

  Today taken a new Samsung BX2240X monitor and it has ports dvi or vga, computer has just vga. Can I use an adapter or a new video card is necessary. Computer Compaq 4010 is a pci express slot on the mobo. The PSU is 220w and the + 12V - 16 Hope a. I gave enough information sure Big Dave will be my response makes a male vga adapter to dvi female, but the PIN to dvi outputs look like mine.

  The best picture would be obtained using a video card with DVI connector.

• Can I use my Switch SW3-013-1566 as a monitor of the camera using the HDMI port?

  I did research on this scenario but see no mention of the possibility of using my Acer

  SW3-013-1566 tablet as a digital monitor for my Canon 7 d DSLR camera. If anyone knows how this can be done please let me know and which downloadable programs I could use.

  Thank you

  Well, according to this video , you can. You use the USB connection and software from Canon. You wouldn't be able with the HDMI port without any other additional hardware to do the video cpture.

• Connect external monitor via the VGA port > > BSOD

  Hi all

  I have a laptop Acer Aspire V3-772 and I had an (obvious) problem. When I connect an externel to my VGA port my laptop freezes. After that I restarted my laptop (still connected to the monitor via the VGA input) I get the following BSOD:

  video_tdr_failure igdkmd64.sys

  This error I've read on the internet has nothing to do with the video card intel. On this laptop, there intel 4600 internal videocard. There is also a second video card which is geforce gtx 760 m.

  I updated my system completely and everything works fine. Except the VGA port.

  I tested my HDMI port that works correctly, open the same screen/monitor connected via the VGA input it freezes / BSOD.

  One give me advice on what could be the cause?

  is this hardware or software really? I think that the software. In any case I'll try to install the older version of the video card driver intel. I'll post if it works.

  I would like to have some advice on this issue.

  Thank you!

  Thanks for your reply. I tried already. HDMI works very well but even VGA displayport monitor (so double male vga cable) causes system hang still > BSOD.

  I did a factory reset. Same result.

  Conclusion... Its a hardware problem.
  I'll contact support so they can pick up my laptop for repair.
  I lost my weekend for this problem.

  I'll change this topic as resolved since it's associated mobo (intel grappics card).

• I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  Have you plugged your monitor with a USB cable to your computer?

• Operational status SCCP bring up is successful. message not sent to port or VTY sessions to THE

  Hello

  On a Cisco IOS router, when the command of the CSPC is configured, the following message is sent to the console port:

  Operational status SCCP bring up is successful

  However, this message is not sent to telnet or ssh sessions through VTYs, or ports in the

  Is this a bug?

  I tested it on:

  2821 router running IOS Version 12.4 (24) T6 with function ADVENTERPRISEK9 defined

  2801 router running IOS Version 12.4 (24) T6 with function SPSERVICESK9 defined

  2801 router running IOS Version 12.4 (24) T6 with function ADVENTERPRISEK9 defined

  2921 router running IOS Version 15.2 (3) T

  2851 router running IOS Version 12.4 (24) T6 with function ADVENTERPRISEK9 defined

  Gateway analog voice VG224 running IOS Version 15.1 (3) T1

  Router 7206VXR with NPE - 400, running IOS Version 15.1 (4) M4 with the ADVENTERPRISEK9 option

  I'd say it's a (minor) bug.  An IOS programmer SHOULD have sent the message to the logging engine, but sometimes a programmers could write a message directly to the console for internal diagnostics during development, even if it is not the best practice.

  They should remove this message before sending the code, or make a call suitable for the engine of logging to announce the event through standard logging mechanisms.

  Please engage the TAC in order to get a bug filed.

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Tab for claim to the Session of the monitor is by session or any database?

  There is Contention tab under Tools-> monitor Sessions. It updates whenever another session is selected in the list of the sessions above. If this tab shows claim through the entire database? or is it just show for this session if the session causes or experience any claim?

  The latter.

  If you look at the SQL code in this page, you can see that the WHERE clause limits the results of the current session of the main report - this is indicated with the: rating of SID.

• Edit 'Play' in the new port monitor?

  Since the 7.1 update connection monitor was wrapped in the program monitor.  This has worked well for me except in the case of the 'Play Around' to change the function.  In the window "Port monitor" previous, I could twist a clip, do with the function of 'Play Around', tweak, view, tweak, view, tweak, etc..  Now whenever I use the 'Play Around' feature, it does the job, but at the same time, it pulls me on the monitor connector and in the regular program monitor.   So now if I want to experiment with an editing tool, it adds an extra step to the process... Enter monitor connection, twist, finds out, enter (again) connection monitor, twist, finds out, enter (again) connection monitor, twist, view, etc..

  As I am fine-cut a series of changes that require a lot of corresponding action, this additional step adds a considerable amout of time to my work flow (even by using the keyboard shortcut to get back into the connector monitor)... I wonder if anyone else has had this problem and knows a work around?

  Thank you

  ANP

  I'm not sure I understand.  The space bar now committed the playing functionality that repeats until stopped, around how automatically return you to the mode normal trim.  You get out of the mode pad again hit the T, uncheck the edit point or by moving the ICT in the sequence.

  It's pretty brilliant and effective, I think.

• Mirroring of the ports on Dell PC 6224

  Hello

  I'm trying to implement Port Mirroring on a PC 6224.

  The Setup Guide, I read 'You can configure several ports as source ports switch and port of a switch as a port of destination.'.

  But when I try to add a fifth port source port mirroring, it returns the message "no port source more can be added."

  session mode 1 #monitor console (config)
  Console (config) #monitor session 1 destination interface 1/g24
  Console (config) #monitor session 1 source interface 1/g1
  Console (config) #monitor session 1 source interface 1/g2
  Console (config) #monitor session 1 source interface 1/g3
  Console (config) #monitor session 1 source interface 1/g5
  Console (config) #monitor session 1 source interface 1/g6

  No more of source ports can be added.

  Console (config) #.

  Someone has experienced the same problem? Is there a limit in the number of source interface?

  Thank you

  Hello

  The number max of ports that can be configured for duplication of port is 4.  I am always checking if change the firmware will allow more to be configured & will report once I have this extra info.

  Let us know how it goes

• Satellite L650 - no signal on TV via the HDMI port

  Hello

  I have a problem with the HDMI port. I am not able to connect the L650 to my TV. There will be no incoming television signal. The TV port is correct because I can connect my digital camera without any problems. The HDMI port is not displayed in the hardware Manager. I don't use the version of windows 7 that has been installed originally. I formatted the disk and have reinstalled a different version of windows.

  Do I need a special driver to activate the HDMI port? I just installed the ATI catalyst driver. If you would like more information, I'll try to give them as soon as possible.

  Thank you very much for your help

  Hi song2.

  > have reinstalled a different version of windows.
  And what version of Windows you have right now?
  You have yellow exclamation points in the Manager of devices or unknown devices?

  In general there is no driver special HDMI port. If you connect your laptop to TV/monitor external, you must press the FN + F5 key combination to switch between monitors.

  Check it!

• Tecra M9 longer works with the Advanced Port Replicator III

  Hello

  I have the Advanced Port Replicator III Plus (PA3474E-1PRP), and it works very well with my M5 (M3 and M200). For example I connect my laptop through it to my monitor/mouse/keyboard/external DVD/hard drives, sound, webcam etc...

  Now, I'm to assess what should I buy as my next laptop and the M9 (PTM91E-03000MEN) seems good.

  Question: * the M9 will work with my plu III advanced port replicator? *

  Otherwise, * y at - it another docking station option that will allow me to connect a M5 and an M9 * please? (of course not at the same time).

  If there is no solution that allows a single docking station for the M5 and M9, then I might as well choose a laptop from another supplier... Main reason to stick to Toshiba all these years is the docking station compatibility that I move older models to the newest...

  All thoughts welcome...

  See you soon
  Daniel
  --

  Tecra M9 and Tecra M5 do not have the same docking connector.
  This means Tecra M5 is the APR III +, Tecra M9 has Express Port Replicator.
  You need the correct docker for each system.

  May it is a solution to be able to use the Toshiba Dynadock. It's USB based:
  http://www.dynadock.com

• Satellite P100-194: bad image on TFT quality external to the analog port

  Hello.

  I see a flicker on my external monitor Hyundai L91A, especially on dark images, such as web pages with a black background. I installed the. INF. I changed the refresh rate of 60 to 75 and back. Automatic adjustment does not help. The TFT screen is connected to the analog port. With the laptop that I had before the Toshiba I did not have this problem.

  What can be?

  What about the internal laptop display? The flicker even appears on the screen of the laptop?
  Have you used the original Toshiba display driver?
  I think it s not a laptop issue but only the external display problem.
  By the way; It s any refresh rate you will use. For TFT displays, the refresh rate is set to 60 Hz and you n t need to change. Discount quality will not change if you use 60 or 70 Hz

  You can connect to another screen external TFT to you laptop to check if the same flicker will appear.
  Then we could speculate it it s an analog channel or the external display issue

• Portege R500 - anyone using the DVI Port Replicator II on WIndows 7 Beta?

  Hello
  I'm using the beta version of WIndows 7 on my R500 and runnig it's just well except the DVI Port (on the Port Replicator II Slim).
  I have installed this software Fingreprint, battery bluetooth (which are recommended as a solution by the Action Center) and the 'TOSHIBA value added together"which adds the management software of power supply, control over the 2 hardware buttons and gives the FN menu to the screen to control the functions FN1-9.
  I think I can say it's definatively a driver problem, because if I start the R500, the windows loading screen appears on my screen, but when he switches to the desktop, the external screen turns off and the desktop on the screen of the laptop. Also, no chance to activate via FN + F5.
  I tried with the driver Windows 7 buildin, the latest driver from intel (15.8.3) and the vista driver provided by toshiba (7.14.10.1244), but none of them work: (unlucky
  BTW: the vga output works, but only UNdocked :(
  Does anyone have a solution or a tip what to do or try?

  Hello!

  First of all, I have to say that Windows 7 Beta is as its name the indicates that a beta so there might be some problems and it s not sure that everything works fine with Windows 7 Beta.

  Your problem: you see the second monitor in the display settings? There you can active it and mark the option extend my Windows desktop on this monitor.

  Lastly but not the least you should do an update of the BIOS if you have n t the latest version.

  Good bye