Set a default value for an attribute in modules - OPM

Similar Questions

• What is the best way to set a default value on an attribute that is dependent on a query?

  Hello master,

  I use Jdev 12.1.2. I have a project requirement where I have to set a default value for an attribute. The default value is derived from an SQL query.  I was intending to set the value of the Create method of the entity using VO class. But I preferred to have an opinion on if I do best.  Please advise

  Thank you and best regards,

  Mohamed

  It is a logical place, so just go ahead with this...

• How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Mr President.

  How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Concerning

  For the date, you can use groovy expression adf.currentDate to set the current date. reference http://adfgouravtkiet.blogspot.in/2012/11/how-to-set-default-values-for-entity.html

  You already have ways to use the sequence.

  How do you add a new value in the form. You're creating a new line of your page (user interface) and by engaging with validation operation? Unless you commit you will not be able to see anything in the table.

  Thank you

• How to set the default value for the digital control on front panel?

  How to set a default value for a numeric control of LabVIEW 2009 Front Panel? I have several input values that are actually configuration settings I want to settle with the default values of zero. I want them to be the values displayed when the façade first appears until the code is executed.

  I really want to use the Minimum and Maximum limits by default for this because I still want to be able to define acceptable limits for values.

  I would not be able to specify a default value of zero for these entries?

  Enter the desired value, then "right click...... of default data of value to operations. Save the VI.

• When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  When you create a PDF from a scanner, is there a way to set the default value for the size of 8.5 x 11 letter custom every time I make a PDF from a scanner?

  Hi kevin7frg,

  You can go to "file > create > scanner > configure presets PDF»

  The dialog box that appears, you can choose 8.5 X 11 as the default width and height of PDF pages to scan.

  

  Hope that helps.

  Kind regards

  Ana Maria

• Syntax to set a default value for the metadata of Web site field

  In my profile, I have a rule where I did the infoOnly metadata xWebSites field and define a default value like this:

  < $dprDefaultValue = # active.xWebSites$ >

  Y at - it something I am doing wrong? Incorrect syntax?

  Thank you!!

  I found this in the documentation of the Site Studio:

  "To identify the ID of an article or a website, open the page to check content on the content server and click Browse next to the"Section of the Web Site." In the window choose the Web Site Section, select your Web site and notice the ID in brackets next to each section (Figure). »

  Can I set the default value for the ID?

• Set a default value for SQL based LOV

  Hello
  
  Is there a way to set the default value in a LOV. Like let him say the LOV gets of the separate to_Char(date_field,'YYYY') in a table. I want the last year is the default value. Currently, since I was the null option also, when the page loads, the lov is always null. I need to change it manually.
  
  Thank you
  Sun

  You can easily set the default values for the dynamic element

  http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21674/bldapp_item.htm#HTMDB28287

  for example, select the default type in the body of the PL/SQL function and enter the following code

  declare
  v_return date;
  begin
  select max(date_field) into v_return from your_table;
   return to_Char(v_return,'YYYY');
  exception when others then
  return null;
  end;
  

• function to set a default value for a column that is defined by the user

  Hi all
  
  Can use us the user-defined function to set a default value for a column?
  
  for example:
  

  create or replace  function test1  return number is
  begin 
  return 10;
  end;
  
  
  create table testt
   (id  as test1,
    name varchar2(20));
  
  error:
  ORA-02000: missing ( keyword

  Thank you
  Ashwani

  Ashwani says:

  Can use us the user-defined function to set a default value for a column?

  N °

  A trigger (this function call) can be used to implement such a feature.

• How to give the default value for an attribute in the OPA

  Hello
  
  I need a default attribute boolean to true at the beginning of the session of the OPA. I need to use it to control the visibility on some pages.
  
  Can someone please throw light on how to best implement this?
  
  Thank you.

  You have a few options (as always with the OPA!)

  If you use determinations of Web and that you have defined your own screens, then the easiest way is to define a default in the screen - you can either do a default static or dynamic based on an attribute is proved by a default rule.

  If you want a value by default when you debug without using screens, so you're better off just writing a rule to set the default value. It's kinda interesting with a Boolean value as you do not need to tell the value of the attribute OPA - it is inherent in the name of the attribute. For example, if you had a conclusion "control is visible" (with no = "true" or whatever it is) it would be set to 'control is visible' to 'true '. Set it to false, you simply need to type "control is not visible" - which actually (thanks to OPA assuming a 'subsidiary conclusion') defines "control is visible" to "false".

  You can then replace it in the debugger of via a screen issue (if you force the question).

  I don't know how it would work with server of determinations if you had a default value proved by a rule, but has also provided a value in the data - maybe someone else can clarify if the rule takes precedence over the input data? My usual approach is to try locally in OPM and see (using something like SOAPUI to integrate with the determinations OPA server web service). If that's the best way to implement this course (or indeed if using a default value of visibility control screen is best practice) is difficult for me to say - I am a relative beginner!

  Hope that helps a little...

• How to set the default value for the Group of radio buttons

  Hello
  Here's my situation.
  I have a form of HTML text. In the form, I have an element called "* drinks * ' and its options in the radio button group or coffee, tea. Now, I want to put a default value("NA") to the radio of drinks group. Is it feasible. If so, how. Advice would be useful. Thank you

  Hello!

  You can also set a default value in the radio unit of page article under the default setings. Here, you must put the result value (if you have static: Café;) One, the; B, NA; C you write C if you want NA default choice) of your radio.

  concerning

• Default value for the attribute transient

  Hello
  
  I use jdev 11.1.2.2.
  
  I have added a transitional attribute to the view object.
  
  I added a adf.context.securityContext.getUserName () default value to the attribute.
  
  Since I gave him in default value display only during the Insert to create operation.
  
  But I want that it always shows the value.
  
  How can I do?
  
  
  Thank you and best regards,
  Rakesh

  The attribute can is "always"?
  Also adf.context.securityContext.userName as the default value Expression with recalculate "Always" should work fine.

• Best way to set the default values for the form elements

  Hello
  
  I have a form with a lot of defaults that is mentioned below...
  

    Field                      value  
    created by             :APPL_USER
    creation_date         SYSDATE
    last_updated_by     :APPL_USER
    last_update_date    SYSDATE
    item1                     value1
    item2                     value2

  I am currently using calculation-> after presents... then when we create/update a record... these computaion takes place and the default value for the inserted values get... THIS WORKS PERFECTLY WELL.
  
  I want to know... If this approach is fine OR we can have a better approach to achieve...?
  
  Thank you
  Deepak

  Hello

  I think it's good if it fits your need.

  But why you have these fields in the form?
  created by: APPL_USER
  CREATION_DATE SYSDATE
  last_updated_by: APPL_USER
  last_update_date SYSDATE

  The user can enter the ones?
  I thought that those who are to audit and I would fill those drop with trigger in the database.
  So that you get the same "correct" values if you need to manipulate the data with example of sql client

  BR, Jari

• MASTER DETAIL - SET THE DEFAULT VALUES FOR ELEMENTS

  I have a page master detail where, on the master, I do things like update the fields entered_by and entered_date
  by applying functions to define item-level details and the read-only setting.
  
  On the portion of the page detail, I would do the same thing, but I don't see the point of page details - only master items.
  The portion of details is for comments so I wish I had the commenter_name and commenter_date the value of the values
  When I hit the Add button line on the portion of details.
  
  Where are the elements of detail?
  
  I use APEX 3.2
  
  Thank you
  
  Steve

  Hello

  When you use the master detail form, APEX build "Detail part" in the report. So if you edit the page, you won't see actual items for 'Party detail'

  If you want to set default values or want to format these items, you may need to perform like this

  1 > edit 'report' of the "retail portion.
  2 > click on attributes report
  3 > click on the column, you want to set default values
  4 > now here, in accordance with article 'Tabular form Element' you can do this by setting appropriate in 'default' type fields and "default".

  It may be useful

  See you soon
  Hari

• How can I set the default value for an input text element?

  Hello
  
  I have a page where I ask the user to fill out entry texts.
  The input text have links for some parameters of an exported method of the AM via the DataControl.
  Once the user fills the text of entry, he can click a button that executes the method associated with AOS.
  It's ok.
  
  Now, I want to set default values appropriate (taken from a java method) for some texts of entry on the initial page rendering, for they are virgins.
  How can I do this?
  

                              <af:inputText value="#{bindings.parameter.inputValue}" label="Method Parameter"
                                            required="#{bindings.parameter.hints.mandatory}"
                                            columns="#{bindings.parameter.hints.displayWidth}"
                                            maximumLength="#{bindings.parameter.hints.precision}"
                                            shortDesc="#{bindings.parameter.hints.tooltip}" id="it15">
                                  <f:validator binding="#{bindings.parameter.validator}"/>
                              </af:inputText>
  
    <executables>
      <variableIterator id="variables">
        <variable Type="java.lang.String" Name="parameter" IsQueriable="false"/>
      </variableIterator>
    </executables>

• Setting the default value for a dynamic selection menu

  Hi I have a php with 2 forms to this topic page, you feed on the other to achieve a lock down (manufacturer > model). The menu then select I have a static default value 'Select a model aircraft', I want to set a value for the first menu select dynamic to read "select the manufacturer. When I add a static value to my list, it tells me I alreay have a dynamic behavior on this menu and choose another. I've included the code for two menus. Thank you in advance, I know it must be a stupid question, but it has left me speechless.

  Tom

  This is the menu that I want to add static value defaults to.

  < td width = "667" > < select name = "airMake" style = "" width: 200px; "" OnChange = "This.Form.Submit (); "id ="airMake">

  <? PHP

  {}

  ? >

  < option value = "<?" PHP echo $row_rsAirManufacturer ['aircraft_manufacturer']? > "<?" PHP if (!) strcmp () ($row_rsAirManufacturer ['aircraft_manufacturer'], ((isset($_POST["airMake"]))? $_POST ['airMake'] :""))) {echo "selected =-'selected\'" ;}?})) > > <? PHP echo $row_rsAirManufacturer ['aircraft_manufacturer']? > < / option >

  <? PHP

  } While ($row_rsAirManufacturer = mysql_fetch_assoc ($rsAirManufacturer));

  $rows = mysql_num_rows ($rsAirManufacturer);

  If ($rows > 0) {}

  mysql_data_seek ($rsAirManufacturer, 0);

  $row_rsAirManufacturer = mysql_fetch_assoc ($rsAirManufacturer);

  }

  ? >

  < / select >

  < table >

  < /tr >

  < / table > < / make >

  < do action = "quoteResult.php" method = "post" name = "quoteForm" > "

  < table width = "100%" border = "0" cellpadding = "5px" >

  < b >

  < td width = "260" style = "color: #000;" text-align: right; "> aircraft model: < table >

  < td colspan = "2" > < span id = "spryselect2" >

  This is the menu that works properly.

  < select name = "airModel" style = "" width: 200px; "id ="airModel">"

  < option value = "" <? " PHP if (!) () strcmp ("", ((isset($_POST["airMakeField"]))? ") $_POST ['airMakeField'] :""))) {echo "selected =-'selected\'" ;}?} > > < / option >

  <? PHP

  {}

  ? >

  < option value = "<?" PHP echo $row_rsAirModel ['aircraft_model']? > "<?" PHP if (!) strcmp () ($row_rsAirModel ['aircraft_model'], ((isset($_POST["airMakeField"]))? $_POST ['airMakeField'] :""))) {echo "selected =-'selected\'" ;}?})) > > <? PHP echo $row_rsAirModel ['aircraft_model']? > select a model airplane < / option >

  <? PHP

  } While ($row_rsAirModel = mysql_fetch_assoc ($rsAirModel));

  $rows = mysql_num_rows ($rsAirModel);

  If ($rows > 0) {}

  mysql_data_seek ($rsAirModel, 0);

  $row_rsAirModel = mysql_fetch_assoc ($rsAirModel);

  }

  ? >

  < / select >

  -Change

  on this subject.

  Select the aircraft manufacturer

  So if the value of "airMake" is - 1, you know that no choice has been made.