Set adapter LabVIEW auto detect programmatically

Similar Questions

• C60 DVI input 3 Auto Detect using a DVI to VGA splitter

  Hello

  We install a codec C60 using a splitter DVI input n ° 3 for the presentation source (DVI - I male to DVI - D & VGA Splitter cable's female adapter)

  The DVI input source is configured as Auto-Detect.  Administrator's Guide confirms this seting automatically detects the signal is analog (VGA) or digital (DVI or HDMI).

  The problem is the codec can't really switch from one source to another.   We do not seek to send two signals at once, but rather stable wether VGA and HMDI will be detected by the codec according to the entry sends the laptop.

  can anyone confirm if this is a limitation of the codec, or bug in firmware or even simply impossible without adding additional hardware.

  see you soon,

  Mel

  Hello

  Yes, auto-detection works for me.

• Computer laptop AUTO Detection - your product is not supported by this site

  I reinstalled Windows 7 successfully and decided to see if there were updates of Toshiba. The above message has been received. It's never happened before.
  I have aToshiba Satellite L350-277. PSLD4E-00E004MD
  WIndows 7 Edition Home Premium.

  I tried AUTO Detect, I tried to enter the information manually. I enter the family then details series but when I try to enter the ModelNo, L350-227, it is not there to choose. I know I'm correct (UK) web site. It seems that all of a sudden my laptop does not exist. When I reinstalled Windows, I got my connection Wireless running and connected automatically to Toshiba laptop, I got the serial number which is the same as what is on the underside of the laptop.
  Anyone got any ideas?

  >... but when I try to enter the ModelNo, L350-227, he's not there to choose.
  If you access section carefully, you will see that there is no option for the name of the template, just for the model and the model number for your laptop is PSLD4E.
  This model is specific for certain configuration of model and material. So when you choose this model number, you will get the list of all the important factors, tools and utilities for your laptop model.

  Generally speaking, all with tracks of updates simply and automatically. If you use the factory settings and the Toshiba recovery image it contains small tool called TEMPRO. This control of the tool if some updates are available and you will be informed if a new version is available.

  If you use clean install of the OS, you can download and install TEMPRO more.

• OfficeJet 7612: Format of paper Auto detect is no longer works when scanning JO 7612

  I scanned several scans of different sizes (usually if A4) using the "scan to e-mail" from the control panel of my JO 7612.  The email would come with an attachment that is the same size as the original.  Everything is good.

  A few weeks ago, something changed.  Now whenever I scan (say) an original A4, the image that is sent to me but wide A4 A3 in height.  This is true for any original size - the right width is detected, but the height is still the A3 size.  If I scan a business card, I get an image of card, sitting atop a high column of 42 cm white...  I then edit the image, as otherwise display or printing the image is a joke as it tries to keep all of the image on a page...

  "If I manually select the size of the paper, I get the correct size image, but I do whenever I scan an A4 page, such that it resets to the default" paper size: "automatic", and some odd size originals are not all selectable page sizes.

  The glass and the white cover are clean and there is no brand etc. on them.

  How can 'reset the detector to auto page size' so that it sends to me once more an image that is the right width * and * height?

  Thnaks

  Before we get ahead of me, I'm here just with a new thought. If there is something on the glass, the printer can be detected, which causes the Auto detect the sensor to fail. We will clean the glass before doing anything else. Once you clean the glass, try scanning with auto detect again and let me know if it works. In the meantime, I'll keep brainstorming.

  Thank you.

• Satellite L655 - 17 H is not found on the support using auto-detect Web page

  Any reason why my L655 - 17H detect automatically on the website?
  Is there a known problem?
  It would be nice if I knew automatically updates to wahat are suitable for my machine.
  It should be simple right?

  Hello

  I put t know why the auto detect function can't find your model laptop, but you can manually search for updates driver on the European driver Toshiba page.

  But to be honest that I put t see any reasons for the update driver if you laptop is running correctly.
  I'm still this old recommendation; never change a system running ;) but that's my personal opinion

• Auto-Detect of Lenovo

  Computer won't auto-detect while in IE9 says, I need to install add it to auto detect, I install add on and still does not detect automatically

  I figured it out you have to be in the 32-bit version of IE9 for her to work. If you use the 64-bit version, it won't work. Thanks for the quick response I thank you for your answer

• When I change the setting by LabVIEW on my device, I see change on the monitor of the device?

  When I change the setting by LabVIEW on my device, I see change on the monitor of the device?

  This question should be addressed to the manufacturer of the device. From your previous posts, I guess you use GPIB or serial. If the unit has received the order, the manufacturer should be able to tell if no indicators on the device to update when the order is received. Based on my experience, however, the device indicators will most likely update on receipt of an order successfully.

• virtual comport auto detect

  Hello

  I'm trying to comport auto detect.

  I am uisng status = viFindRsrc (defaultRM, "ASRL [0-9] *:?") * INSTR", & find_list & retCnt, instrDesc);  funtion to detect the port, but his work until 09:09 port it detects is not correct. Please give an idea of how tp slove this problem.   (comport can be from 1 to 255).

  Thank you

  
  

• software for auto detect computer plug without driver

  I have a desktop.and that I have not the cd of drivers supplied with it.i had it together 3 or 4 years back.i to install its driver vga and sound but don't know their model no.xxxxx... etc so how can I install my driver or can you suggest me some software which auto detected unmanned system installed.

  If you can provide the motherboard model number, we can probably necessary drivers...

  • Click Start
  • Click on run
  • Type msinfo32.exe and press enter
  • Make sure you system summary is highlighted (click it if necessary) in the left pane
  • Transcribe the following information to an answer: System name, system, system model, Type system manufacturer

  Devices lacking drivers appears also as problem devices in msinfo32.exe...

  • Enlarge (click on +) the components section
  • Expand devices problem
  • For every problem the unit to highlight the side (click) the ID of PNP device on the right hand, press ctrl-c (or use Edit-Copy), return to your reply to this message and press ctrl-v

  Each problem the appliance must have an entry in your response to this post that resembles the format that...

  ID of device PNP PCI\VEN_1011 & DEV_0009 & SUBSYS_21140A00 & REV_20\3 & 267A616A & 0 & 50

  If you want to study by yourself FRI and DEV numbers (in the above example, 1011 and 0009 respectively) can be found at http://www.pcidatabase.com/

  There is a utility that I remember another woman on this forum recommend. It can also help him, I will do my best to find and report if I do.

  Tricky

• are there ways to make winXP auto detect and pair up headset/bluetooth headset when you start?

  are there ways to make winXP auto detect and pair up headset/bluetooth headset when you start?

  Hi tang kok Wee,

  ·         What is the service pack installed on the computer?

  You can see the below mentioned Microsoft Knowledge Base artcle and follow the steps. The next time you connect the device to bluetooth headset, it will be found automaticlly.

   

  How to troubleshoot Bluetooth detection and connectivity issues in Windows XP Service Pack 2

  http://support.Microsoft.com/kb/883258

  Let us know if that helps.

• From the start I get message "Auto Detect (input analog)

  I have a HP Pavillion T560A connected to a Dell monitor.  When I turn on the PC I get a message: auto detect (analog input). In energy saving mode.  Press the computer's power button or any key on the keyboard or move the mouse.  When I do that nothing happens.  How can I start up?  Jim cordially

  It has not been used for four months but was only servcied a week pprior to that and worked well.  The fan turns on and the hard drive seems to be working.  I tried to presisng the F8 key as I turn on but to no avail

  Sorry but no.  I took it for an exoert which he cleaned up and said it was contacts simply dirty - works perfectly now

• Auto Detect does not work; can I switch to MSC?

  After trying all the fixes, I concluded that my auto detection mode just doesn't work and the drivers, or whether it cannot be repaired. my computer (XP S3) simply does not see the sansa clip +.

  But in MSC mode, it see it.  Unfortunately all the audio books that are responsible for now are not visible during exploration mode MSC; Opens the Sansa clip folder, it displays all the empty folders even if there are 4 books out there.

  My questions: 1) is there a downside to using the MSC mode?

  (2) is it possible to get mode MSC to recognize books here now, or do I have to reformat and start over?

  Oh and the other mode is not recognized or the other.

  Thank you, I'd just throw this thing. !

  Phil of the lost

  If I understand correctly, the MTP mode is broken on your PC and the device is in MSC mode.

  No worries, you can use MSC, but you lose the basic functions of the PSG.  According to your audio source, PSG is required for the feature DRM (license).

  I believe that sound can be used by MSC as their DRM is a little different.

  To fix the MTP system (if the device communicates in MSC, you're almost there, like data makes to the device), manually select MTP mode to maintain the function of automatic detection to go back to the other mode and plug.

  If you open Device Manager, find the Clip mentioned under Portable device.  Device Manager can be found starting with the control panel.  Double click on the Sansa, or right click and select Properties > driver > Uninstall.  I like the right click directly to Uninstallshortcut.  easy huh?  Then, unplug the unit, wait a minute (30 seconds should be enough), then plug back in and it will reinstall automatically.)

  Don't forget, the MTP drivers are part of Windows Media Player 10 and later versions.  Windows XP came "out of the box" with 9 WiMP, which can be upgraded by simply installing WiMP10.  The application Microsoft MTP Kit from Portage is available on the Microsoft Web site also, often enough to install the Kit fix a frazzled WiMP 9 and install later.

  Why PSG disappears?  Often, the registry entry for the Sansa is key, as the ability of the PSG is simply "off." The registry is fragile, often changed that you plug into various things about these USB ports, or install different applications.  Windows uses the registry as a pure practical cheat to decide how to manage devices that only can be found on the USB bus.  If the entry is corrupt, we suddenly lose features such as PSG.  Try reinstall thing, it is the simplest solution and generally solves the problem.

  Bob

• How to detect programmatically shows the lock screen?

  Someone had the idea to detect programmatically if the lock screen appears? I want to detect this screen so my application could do special Notifications.

  Thanks for your help.

  Marc, thank you very much. That's what I'm looking for.

• Auto Detect / auto play does not

  I had problems recently that took the time to solve with market difficulty he and other services public and everything seems to work ok except Auto Detect / Play doesn't work when I plug something into my readers USB or CD in my CD player.

  I am reluctant to return to the system restore, I have spent a lot of time to get my computer working again.

  All ideas

  I solved via "Microsoft Fix it 50475'

• How to set up checkboxes for SelectManyCheckbox programmatically?

  Hello experts!

  Please help me with my question.

  I work with Jdeveloper 12.2.1.0.0

  I have SelectManyCheckboxaf:selectManyCheckbox

  <af:selectManyCheckbox id="my_selectManyCheckbox"
                    valueChangeListener="#{TasksFilterBean.onTasksFilterPriorityChanged}"
                    autoSubmit="true"
                    required="false">
                        <af:selectItem label="High" value="1" id="si4"/>
                        <af:selectItem label="Middle" value="2" id="si5"/>
                        <af:selectItem label="Low" value="3" id="si6"/>
  </af:selectManyCheckbox>
  
  

  And I need to configure programmatically check boxes.

  I found this item the bean.

  ***
  RichSelectManyCheckbox my_selectManyCheckbox = (RichSelectManyCheckbox)task_page.findComponent("my_selectManyCheckbox");
  
  
  _logger.info("my_selectManyCheckbox: " + my_selectManyCheckbox);
  
  

  And question.

  How to set up checkboxes for SelectManyCheckbox programmatically?

  For example.

  I want to configure environment checkbox to activate.

  How to do this?

  PS. I'm tempted to find the solution, before you create new discussion.

  I added the SelectManyCheckbox property:

  value="#{TasksFilterBean.selectedCheckboxes}"
  

  And I added some methods in the bean:

      private List selectedCheckboxes;
  
      public void setSelectedCheckboxes(List selectedCheckboxes) {
          this.selectedCheckboxes = selectedCheckboxes;
      }
  
      public List getSelectedCheckboxes() {
  
          List selectedCheckboxes = new ArrayList();
          selectedCheckboxes.add("2");
  
          return selectedCheckboxes;
      }
  

  And now everything works.

  =================================

  Now I CAT change bean like this:

      private List selectedCheckboxes;
  
      public void setSelectedCheckboxes(List selectedCheckboxes) {
          this.selectedCheckboxes = selectedCheckboxes;
      }
  
      public List getSelectedCheckboxes() {
  //        List selectedCheckboxes = new ArrayList();
  //        selectedCheckboxes.add("2");
          return selectedCheckboxes;
      }
  

  And now I can then use:

          RichSelectManyCheckbox my_selectManyCheckbox= (RichSelectManyCheckbox)task_filter_page_template.findComponent("my_selectManyCheckbox");
  
          my_selectManyCheckbox.setValue("1");
  

  That all.

  Thank you all.

  Especially at Jiri.Machotka - Oracle

  ===========

  UPD. I'm sorry. It looks like I can configure values to 1 item on SelectManyCheckbox without bean methods.

  And with the above example, I had problems when I unckeked all the check boxes.