Set the amplitude of mike when recording directly in hearing CC?
I can't figure out how to set the amplitude of mike when recording directly in hearing CC.
When I load hearing I have click on the waveform and create a file.
I can then click on the Red record button and start recording, but the amplitude is very small.
I know I can fix it in post editing but how to adjust the amplitude record raw?
Well, I looked at the manual. If I try to use a microphone with this mobo, I'd be very inclined to mount the system audio front panel, as it seems to have an understanding of slightly different mic that work peut better (although I think that you must run the configuration utility to configure). The details of this are on page 30 of the manual. For starters, it seems that he might in fact be two mic channels, which probably means that they took little seriously, a little more than usual.
I still think that the preamp is better, but I won't get it a chance to consider the issue until tomorrow.
Tags: Audition
Similar Questions
-
How to set the amplitude to pwm full example?
Successfully, I downloaded and ran the program in example shown here:
http://www.NI.com/white-paper/2991/en
and see the pulse train to build into my oscilloscope. When measuring the value of a strong impetus, the oscilloscope said 5V.
How can I change to 3?
Watching the DAQ Create Channel node I see any inputs for the amplitude, only the frequency and duty cycle.
Which is set the amplitude to 5volts, and how can I change it to 3V?
Very similar. On the icons above the text box 5 step, you must right-click on the appropriate terminals to add controls for the Offset and the duty cycle.
Calendar/generation is made via the material in this case.
-AK2DM
-
BlackBerry smartphone how to set the Auto Mode bedside when loading?
Hi guys,.
As the topic. How to set the Auto Mode bedside when loading? Because this option, it does not exist in the clock menu options and I think that it was there before I did the upgrade.
Thanks in advance
9000 "BOLD"
Worm: 9000M_PBr4.6.0_rel508_PL4.0.0.243_A4.6.0.297_AT_amp_T
CTS network provider
solved thanks to you all,.
-
The generation dynamic SQL when records using custom
Hi all
We have a few custom folders (we did not create the views) where we joined the table of facts with several dimensions of code so that users don't need to go through several folders. Currently every time a user selects a field in the record, it will automatically joins all the dims in accordance with the definition of record. Is it possible, when the user select only the fact of the table fields in the folder then the sql access only the table of facts (as in dynamic sql) leaving aside the joints.
I'm not positive all able to do so. But even post the question to check if there is a solution found by any one.
Here's the hypothetical scenario:
SQL for my custom folder:
Select
EMP.emp_id,
EMP.emp_name,
job_id EMP.,.
jobs. job_desc,
EMP.location_id,
Location.location_desc,
EMP. Salary
of the emp, jobs, location
where emp.job_id = jobs.job_id
and emp.location_id = location.location_id;
In the example above, when the user select only the emp_id and emp_name, discoverer only accesses the emp table, leaving aside joins jobs and location tables?
Appreciate your answers.Hello
There are 3 approaches you can take, which is best for you depends on your database and the version of discoverer and how much change you want to make:
1. optimization of data - if you use database 11 g and the query sent to the database does not refer to an attachment internal table in the first select statement in the query, for example, the query
Select
EMP.emp_id,
EMP.emp_name,
job_id EMP.,.
jobs. job_desc,
EMP.location_id,
EMP. Salary
of the emp, jobs, location
where emp.job_id = jobs.job_id
and emp.location_id = location.location_id;does not reference the table of localization, so as long as location_id is the primary key for location and emp.location_id has a validated and enabled foreign key constraint then the database query plan will not otherwise the table of localization.
2 synthesis discoverer files - you can manually set the summary files in admin discoverer that contain queries custom with less joins of tables. Thus, for example, you could put
Select
EMP.emp_id,
EMP.emp_name,
job_id EMP.,.
jobs. job_desc,
EMP.location_id,
EMP. Salary
of the emp, jobs
where emp.job_id = jobs.job_id;in a personalized summary folder and discoverer would redirect the request to the summary file if the location has not been used. You can also do a similar thing to the database level using the views and materialized views.
3. complex records discoverer - you can change your custom folder in a folder complex bringing together two or more straightforward cases. If the columns mapped to a single file are not reference, then all joins and discoverer preferences are set correctly the generated query does not reference the table in the simple folder.
Rod West
-
How to set the timeout of read when using channelReader.ReadWaveform?
I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.
When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired. To wait for the samples become available use longer read timeout... »
No problem, I thought, I'll just put a longer period. I searched through the documentation, and the timeout only I found was the watchdog timeout. When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.
I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.
How to set the timeout so that ReadWaveform() is not the time?
Here is the code:
privateAnalogMultiChannelReaderchannelReader;
privateAnalogWaveform
awf; publicList
GetWaveForm() {
Try
{
Task getWaveform = newTask();
getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,
RangeMaximum, AIVoltageUnits.Volts);
getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)
SampleQuantityMode.FiniteSamples, NumSamples);
getWaveform.Control (TaskAction.Verify);
channelReader = new AnalogMultiChannelReader (getWaveform.Stream);
AnalogWaveform
data = channelReader.ReadWaveform (NumSamples); AWF = data [0];
samples As new List
(); for (inti = 0; i)
returnsamples;
}
catch (DaqExceptionexception)
{
MessageBox.Show (exception. (Message);
}
List of
l = newList (); return l;
}
Thank you
Curt
Hi Curt,.
Here is a Knowledge Base that can help you to set the timeout setting in your code:
-
Looking for a way to programmatically set the visible front part when opens a Subvi
I'm looking for a way to programmatically set the visible portion of the front panel, when a Subvi opens. Did not find all the messages that are related, but I do not know how to ask the right question. To be clear, I want to write a VI assistance programme through a list of subVIs to ensure that background images are all in the same place when to open their respective subVIs. I hate to play manually with scroll bars before I save each of the screws... I'm thinking I need to find the top/left of the background image location (know already do) and then to set a property of the VI FP some offset or these values, but I can't find the corresponding property. FP:run - timeposition:custom looked promising, but only affects the location of the window, and not the area of the front panel displays the window.
I should have added that the idea of using the background image does NOT change the origin. Therefore, always be close enough, as your controls and indicators won't move, just the image.
I personally use the OpenG VI and the open method of front panel, when I am in your situation.
-
The videos are blurred when recording a DVD or a hard drive, but in Windows Movie Maker
I converted videos from my Flip HD MP4 to MP3 Mini to allow me to use them in Windows Movie Maker. When I play my movie in WMM, everything is great! When I burn on a DVD or save it in another way outside WMM images and music are perfect, but the videos are grainy and blurred to the point where you don't see any! When I converted them, I used an AVI format as it was the only one who has produced clear videos for download.
I converted videos from my Flip HD MP4 to MP3 Mini to allow me to use them in Windows Movie Maker. When I play my movie in WMM, everything is great! When I burn on a DVD or save it in another way outside WMM images and music are perfect, but the videos are grainy and blurred to the point where you don't see any! When I converted them, I used an AVI format as it was the only one who has produced clear videos for download.
=================================
The following links may be worth a visit:Movie Maker and Flip digital camcorders
http://www.Papajohn.org/mm2-CamcordersFlip.htmlSince a Windows Movie Maker Flip video cameraMight be worth trying to convert your MP4 files to the
Before you import into Movie Maker WMV format.The following freeware can convert:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.pcfreetime.com/
(FWIW... installation..., you can uncheck
('all' boxes on the last screen)First... after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your video clips on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
If the resolution of your finished video file is always
unsatisfactory... you can watch in the use
Custom settings.Windows Vista
Create custom movie settings
for Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/create-custom-movie-settings-for-Windows-Movie-MakerThere are some profiles which can be copied from
the following site that will work in Vista Movie Maker:Personally, I use the profile .wmv
When recording movies.
Slide show-1024x768WMV9Download from the following site...
Movie Maker 2 - economy
Movies - profiles custom WMV
http://www.Papajohn.org/mm2-SavingMovies-CustomProfiles.htmlRight click / Save as... drop in the following folder:
Folder of C:\Program Maker\Shared\Profiles Movie
(if there is no record of profiles... you will have to create it)Choose "Show-1024x768WMV9" when you publish (save)...
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Set the value of items when the box is checked
Hello
My requirement is when a checkbox is clicked it should set the value of an element such as 111111 and clear the values of two objects in a page of the apex.
I used the java script onClick event to set the items using document.getElementByID ('Item_Name') = ";
One element that needs to be eliminated is a type of conditional.
When the element condional, java script works very well. But if it is not present.
code works, but it displays "error on page" for a few seconds.
Is it possible to erase the element only when the element is present in the page.
Thank you
RaviHello
Yes as for example
if($x("ITEM_NAME")){ $s("ITEM_NAME", ""); }
Kind regards
Jari -
I know how to go into the settings and change so that the clickpad is disabled when the mouse is in use. I leave the mouse plugged all the time because I don't like the clickpad. However, I have to disable the clickpad whenever I restart the computer. As if by magic, the parameter disappears whenever the computer is turned off. I want him to stay permanently. How to make that happen.
It is important here to ensure that you do not change ANYTHING else (don't hit the DELETE key on anything)
OK, right click on start, then run
type: Regedithit return on your keyboard
Yes, there are a LOT of things here, but it is organized.
you have the menu at the top, you want to hit edit and then find
type: DeleteUserSettingsOnUpgrade
If you look at the bottom of the regedit window, you will see the location, and MUST say: Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\InstallIf Yes, then on the right side (in regedit window), you do a right click on the DeleteUserSettingsOnUpgrade, and click on edit. Change a 1 to 0.
The logic here is the 1 means 'yes', a 0 would mean no.. We do NOT want the user settings to remove on the upgrade, so that we modify the value.
Once you make the change and press 0, you can go out, and that will solve the problem. Note that you must always indicate the pilots to turn off the touchpad when an external pointing device is connected if you don't have already done.
The advantage of doing this, rather than turn off the touchpad, is that you can unplug your mouse to travel, and you don't have to make time before changes. -
Set the Option (Create Links when placing text and spreadsheet files)
What is the value to adjust the options above? (in InDesign plugin SDK)
You have not set the IUIIData is why it fails. Try the following code, it should work.
InterfacePtr
myCmd(CmdUtils::CreateCommand(kSetLinkTextFilesCmdBoss));) InterfacePtr
sessionWS (GetExecutionContextSession ()-> QueryWorkspace()); WorkspaceRef = UIDRef: GetUIDRef (sessionWS);
InterfacePtr
uidData (myCmd, UseDefaultIID()); It is important uidData-> Set (workspaceRef);
InterfacePtr
myBool (myCmd, IID_IBOOLDATA); myBool-> Set (kTrue); To enable, disable kFalse
Code of error res = CmdUtils::ProcessCommand (myCmd);
-
How to set the size of default when page scan document in
How you set the default page size in the analysis in the document
I found the answer in the Acrobat/kb/scanning-letter-size-documents-results-in-legal-PDF
It's in PDF format by Scanner > Scan button click Options customized to the right of the name of the scanner.
From here he choose Show the Scanner's Native Interface. Then choose the correct page size
which is shaded on so I couldn't choose. It worked in all cases.
I have Acrobat XI and Photosmart HP 7520. Thanks for the replies.
-
Change the format and resolution when recording in my creative cloud
Why can´t I chose the format or the resolution of my drawing when I send it to my creative cloud? Workaround: bring the Adobe > Adobe Illustrator > export to Photoshop (and only at this stage, I can chose format and resolution!) > open Adobe Photoshop for further processing is very annoying. Is it possible in Draw Adobe in the chosen format and resolution of my vector () before a record in my creative cloud? The quality of the PNG Format is medium-low for my purpose!
Hi Daniel,.
At present, the only way to change the size or resolution of the art of the draw is to send it to the office. I know that the team is alternative/additional research how save/export the work, but I don't know what it would look like or when he might make it into the app.
I'll pass your comments along to the team.
Sue.
-
How to set the default English indesign when creating text
How can I configure indesign, when you create a default text for English
You can set default values by first closing all open documents, and then change what you need in the control panel section, the character Panel, styles to paragraph, character, object, table, color chart, stroke and many more.
This affects defaults to application , not those already in your document, so new documents will be created with the settings but old documents will remain the same.
If you must change the default values for an existing document, make sure that nothing is selected and change the settings in one of the panels.
-
Set the format digital u32 when writing of TDMS files
We use two meters of a PCI-6251, with two counters in the mode of angular position, to measure the angular positions of the two optical encoders 1000 per second for intervals of 10 to 20 hours. We are writing to write files using PDM. The files are very large, about 800 MB, but it is acceptable. Convert us the TDMS files in .txt files, and then the data from .txt files are analyzed in Mathematica.
My question is: How does one control the digital format of the data that is written in TDMS write? At this moment we have two counters of the value of the product N = 10000 numbers U32 samples are then transmitted continuously to a TDMS file every 10 seconds. The counters are using units of ticks (integers) and we would like to see whole in our data files. We are convinced that the counters are producing U32 to the format number, since we see the correct U32 integers in the indicators on the front panel and we see labels on the value axis on our waveform graphs are integers, not real numbers.
But it is also clear that Scripture TDMS puts double-precision (64-bit) numbers floating point in the PDM file, not numbers of U32. The double-precision floating-point numbers cause our .txt files to be twice as big as they should be - these .txt files are half full with useless zeros and decimal points. In addition, when you convert the U32 to double-precision real numbers, it seems to be a loss of precision as a result of writing of PDM, which is not acceptable.
Our experience produces pairs of integers: U32 (or I32) format. We could even get away with numbers I16. Is it possible to get our data to stay in U32 (or same I16) format when they are written to the TDMS file? What controls the digital numbers written to tdms? Do all the numbers written in a PDM file end up being written as floating-point numbers double-precision?
We use LabVIEW 8.2 on a PC running windows XP.
If associate you TDMS write U32 data, data in the file will be U32. Floating-point conversion probably occurs when you read data from the file back. You can change this by plugging in a U32 empty table at the entrance of 'data type' reading PDM.
You can check the data type in the file by examining the channel properties in the viewer of TDMS files. If NI_DataType is 7, given in the file are U32. If it is 10, data are floating point.
Hope that helps,
Herbert
-
How to set the timer to countdown when you look at the media?
original title: timer (7) on Media Player
someone deleted this post... two totatly separate issues...
Here it is again.
When Im looking at something in media player, the timer goes upward. (totally unnecessary)
Whats going up?
I have every time next to the timer to show what that account to a click Timer.
Is there a way to keep the time of the end of the video, like to count down to?
And or is there a way to keep the meter countdown to 0?
Hello
Thanks for posting your query in Microsoft Community.
From the information you have provided, I understand that you want to change the time settings in Windows Media Player.
Unfortunately, there is no option to change the settings for time to count backwards in Windows Media Player.
Using the windows-related issues feel free to post on the Microsoft Community Forum.
Maybe you are looking for
-
iOS 10 problems with the Mail application
Dear Apple and community support, Here's my problem: I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails
-
Satellite M30: FN keys not working not not after installing IE7
I installed IE7 and noticed that the fn keys no longer work. (Satellite M30)I don't know if it was the catalyst because I do not know how long the problem has been. The only ones I use often are FN + f6 and f7 +.I really need to be able to adjust the
-
HP Pavilion G 6 - no available internet connection after restore recovery disc
Hello I had to restore my laptop settings via Windows 7 recovery disk, but have no internet connection available. In the Device Manager under other devices I have yellow triangles with exclamation points on them on Ethernet controller network contro
-
How do I create an account for my child on my iPad?
My son received a mini iPad for Christmas. I have already created the iPad in my name, but I would also like to create an account for my son so that it can play its own games, time, text, etc. Is this possible?
-
"My friends find" app works in Cancun?
Go to the Mexico. "My friends find" app works in Cancun?