Set the level of a laptop for Windows 8 from a Windows 7 have a performance difference that buying a laptop with Windows 8 pre - install?

Similar Questions

• Not enough resources to meet the level of failover configured for vSphere HA

  I have a cluster of vSphere based 5.0 based on ESXi 5 knots 2.

  When I try to start a virtual machine, I get an error saying that there is "insufficient resources to meet the level of failover configured for vSphere HA.

  If I turn off an another VM the problem disappears and I can turn on my VM.

  If I try to turn on the virtual machine, I have already turned off, I get the error again.

  It seems obvious that there is a lack resources or some setting is misconfigured, but even after reading the forums and manuals, I am unable to locate the critical resource or parameter that is not correct.

  Based on my experience or vSphere server and ESXi servers are overloaded.

  I have an another similar cluster of hosting a larger number of virtual machines with no similar problem.

  This performance counter and this setting should check to identify the bottleneck?

  Concerning

  Marius

  To check reservations for virtual machines, I would select the Cluster in your vCenter inventory, then select the resources"" tab.  Which displays the child objects of the bunch (VMs, Resource Pools, vApps).  There you can watch settings of CPU resources and memory.  You'll want to watch the column of "Reserves".

  To find the size of the slot and places available, look at the tab "Summary" of your cluster.  There is a tile marked "vSphere HA.  In this mosaic, there will be a link for "Advanced Runtime Info" which will open a new window with the location information.

  When the Admission AP policy is set to "Number of failures of host cluster will tolerate", HA has a very pessimistic view of your resources, since it must be able to handle all the possibilities.

  Another option would be to change the admission control strategy in settings of Cluster HA to "percentage of resources reserved for failover.  It reserves a part of the resources for use by HA in the case of a failover, rather than trying to calculate the size of the individual virtual machines.  With a 2 cluster nodes, I think it a relatively safe bet to set these values to 50%, as your worst case scenario HA would be losing a single host on 2.

• Is there a way to set the audio output in mono in Windows 7?

  I have a set of speakers, but one of the speakers is broken, so for now if I have a stereo song I get only half of the music. Is it possible to set the sound output in mono on Windows 7 so I can listen to the stereo songs via a speaker? I'd rather do than buy a new set of speakers.

  Hi Jamsoup,

  I would like to inform you that, down from sound to mono-stereo sampling is not possible, since stereo sound is a sound standard setting.

  Stereo speakers are designed to produce a sound to both speakers and there is no option to change the settings to use as mono.

  I also suggest that you contact the speaker manufacturer or the manufacturer of the computer for assistance on this issue.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I need to know the process to implement encryption for Windows 8, on a HP Pavilion

  Original title:

  Encryption

  There is a choice in my control panel to set up encryption, but I have to go through the TPM module to be able to put in place, and my PC is not safe and has never been, I need to know the process to implement encryption for Windows 8, on a HP Pavilion

  Hello

  Protect your files with the encryption device
  http://Windows.Microsoft.com/en-us/Windows-8/using-device-encryption

  Protect your files using BitLocker Drive encryption
  http://Windows.Microsoft.com/en-us/Windows/protect-files-BitLocker-Drive-Encryption#1TC=Windows-8

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Are there drivers for the recorder sony icd-bp150 for windows 7

  Are there drivers for the recorder sony icd-bp150 for windows 7? I can't recorder to work with the current drivers of dvr3. It works on XP machines but not my computer windows 7...

  Hello sconley3.

  I did some further research and found that, if the worm Software Digital Voice Editor 3.3 is compatible with Windows 7 OS, the recorder itself is not compatible with Windows 7 OS.

  However, you can try to transfer the files from the recorder to a computer with Windows 7 OS installed in it, using the stereo mini plug cable.
  Plug one end of the cable to the headphone jack of the recorder mini stereo jack.
  Plug the other end of the cable to the Microphone Jack on the computer.

  You can follow the link below to transfer files using mini cable plug.
  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&externalID=C1002444

  Kind regards
  ColbyP.

• How to set the property node maximum xscale for several scale XY Chart

  Hello

  I use a graph XY with three X axis and three scales of axis Y to draw the three sets of data. This works well.

  What I do now is to set the Xscale.Maximum property node for one of the x-axis (the other two autoscale). If I click right in the (Create Blockdiagram; Node property; X scale; Maximum) I can not choose what x-axis I want to put the Maximum for.

  So my question: how to select a specific axis allows you to set the XScale.Maximum property node when having several axes?

  Thank you for your help, any suggestions are appreciated!

  Hello

  After some more research and experimentation, I found that using the scale property X Active I can determine/set for which the XScale.Maximum Xscale is used.

  This solved my problem.

  I hope someone else can save themselves a few hours with this thread!

  Thank you

• I would like to ask what is the official number of built for windows 7 tnx

  I would like to ask what is the official number of built for windows 7 tnx

  Hello Goka86, this is 7600. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions.

  Original title: Windows File Protection Pop Up Message.

  I have a file Windows pop up message Protection. It is said: the files which are required for Windows to run properly have been replaced by unrecognized versions. To maintain system stability, Windows must restore the original versions of these files. Insert your Windows XP Home Edition CD-Rom now. The problem is that I do not have this CD and need a way to solve this problem. Thank you

  Hello

  1. have you made any hardware changes or software on the computer before this problem?
  2. when exactly you receive popup?

  Run SFC scans the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

• Where can I find the Roll Up 2 update for Windows Media Center Edition 2005?

  I'm trying to download Media Player Version 11 and it says that I need to first install the Roll Up 2 update for Windows Media Center Edition 2005.

  Hello

  Before installing Windows Media Player 11 on Windows XP-based computer, you must download and install the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer.
   
  Initially, download cumulative update 2 for Windows XP Media Center Edition 2005 from this link.
  
  Update Rollup 2 for the Windows XP Edition Media Center 2005 (KB900325)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=12939
   
  Check out the link below to install Windows Media Player 11 on Windows XP.
  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8163
   
  For more information, see Help links.
  File Readme for Windows Media Player 11 for Windows XP
  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme
   
  Update Rollup 2 for Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/900325
   
  It will be useful.

• Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to fix it?

  No Option to install repair - SAD

  Hello

  Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.

  I recently had a problem where Vista Business 64-bit would only boot to a black screen with a mobile cursor - KSOD.   Who, in searching the Web I found is a fairly common problem with Vista.  I discovered that my only option was about to reinstall Vista CLEAN and all the other programs I had installed under it.  I can't believe that Microsoft released the 'repair installation option"similar to that of Windows XP, where you can hit the"R"key during installation and we left with nothing but the"System Restore"options and"Startup Repair ".  Neither of which has helped in my situation.  Since then, this was a dual system boot with XP Pro, then any restore point has been removed from the partition to Vista anytime, I started another recognized problem, by Microsoft, which Microsoft has made no significant effort to fix, in addition to recommending that you hide the partion Vista in XP - a whole of XP.  That beats a little the entire purpose of dual boot.

  As I tried to start in safe mode, it left me at the same point as a normal boot - black screen with a cursor.  I tried ctrl + alt + delete and nothing. Two Windows RE options did not help me.  This left me no option but to the completely reinstall Vista.   Why Microsoft did remove the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair.. Please don't tell me that it is because Vista uses an image file instead of an installation as XP system.   I see no other reason for not allowing the upgrade of outside BONE in addition to Microsofts greed and paranoia that he can transform the operating system easier to install illegally.  I hope that some third party has actually changed the Vista installation routine to allow you to install Vista on itself, because as it is, it's really hard for me to even recommend Vista as the operating system or install any where else, if not the only recourse after loading OS, is to reinstall completely.

  Adobe, Autodesk, and almost all other software publishers... allow you to perform a "REPAIR" of their software installation, if something prevents you to load after installation.  Even MS Office has a routine repair.  Ms has an internal version of the Setup routine which allows outside the OS upgrade option that you want to "Upgrade" / repair? ".  If not, why?

  -Todd w.

  "Why Microsoft removed the ability for Windows Vista to install on herself from one location other than being inside the BONE you want to repair."

  «.. . After using XP's repair function, the operating system itself would become less stable and frankly not in a good state of repair. »

  As Todd, is the answer.

  "This response does not hold water as on one of my computers I've been running Windows XP for about four years now, after a repair install.

  Then, you were lucky.  Try to replace the system files on a computer that does not start even at a desk or safe mode usually will get a return to office, but will probably repeat the same problem in a few weeks.  Tech professional would only use this function to retrieve the data before a complete reinstallation.

  "I thought that this area was a place to really get answers instead of the ole same"answers of bs that are on all the other forums."

  It is a place that will try to help you fix your computer if you have problems.  It has technicians in computing, no decision-makers, developers or executives.  We will try to answer technical questions about problems you might have with Windows Vista.

  If you want to have input on the future of Microsoft operating systems, then help you beta-test and provide feedback to the developers.  Windows 7 and IE 8 are currently in beta.

  Another possible place you could make suggestions which could see the developers would be:

  https://connect.Microsoft.com/default.aspx

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building?

  I have an OEM of Windows Vista version on a dying computer. Can I buy the upgrade for Windows 8 and install it on the new PC, I'm building? The upgrade, is published at the same time as I'm rebuilding my PC. I'm just looking to replace my OS. I need Vista.

  Hello

  OEM license is tied to the first machine that is installed on the OEM license dies when this machine dies.

  An OEM license is not transferable.

  And you need a legal edition of Windows, enabled for upgrade.

  There is no use, you buy a license upgrade of Windows 8 by itself as you have to upgrade anything of in the new computer, you build...

  You can buy a license of Windows 8 when it comes out later this year.

  See you soon.

• Where to install the IEE 802.11 g for Windows Vista?

  Where to install the IEE 802.11 g for Windows Vista.

  It's for the wireless, as long that you install the latest driver for your wireless manufacturer, it should install. Note that your wireless network must support this standard in wireless hardware.

  If you update your Windows, it could install too last driver update as optional.

• How to set the maximum fan speed. on X230t (Windows 8)?

  How to set the maximum fan speed. on X230t (Windows 8)?

  I use TPfancontrol to set the speed of the fan in the X230t. However, this will result in excessive wear on your bearing X230t fan, which causes a premature fan failure. Is there a reason why you want to run the fan at max speed?

• Microsoft Bluetooth Notebook Mouse 5000 installation error: "problem installing the driver for the device software - file to install the driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or la

  Original title: Microsoft Bluetooth Notebook Mouse 5000 install problem

  I have a LG S1 Pro Express dual computer with vista sp2. My Bluetooth Notebook mouse 5000 can be coupled to my computer, but after pairing, it will say "Device Bluetooth HID - ready to use" and "unidentified - device failed. It then opens a window saying "problem of installing the software driver for the device - driver for this device is missing a necessary entry.» Maybe it's because the file INF was written for windows 95 or later. »

  I checked some things here and read about intellipoint 7.x and installed but it still does not work. This used to work before mouse

  Hello
   
   
  The drivers that you try to install seems to be corrupted. Let us fisrt remove all traces of the software driver for this device in the Device Manager and then install the drivers from the manufacturer's Web site.
   
  Step 1.
  You can uninstall the audio drivers completely from the Device Manager and re-install from the manufacturer's Web site.
  I would also recommend to check if there are Windows updates for this device.
   
  Step 2.
  Here is the link to download the latest drivers.
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK
   
  Select the type of product like "Mouse" and select the product as "Notebook Optical Mouse" and your version of operating system and the language of the operating system.
   
  This page will direct you to a link to download the IntelliPoint software, which is the software of the mouse.
   
  For more information see the links below.
  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly
  
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
   
  I hope this helps.
   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The Electronic Program Guide (EPG) for Windows Media Center stopped display information guide

  The Electronic Program Guide (EPG) for Windows Media Center stopped display guide information beginning January 1, 2013 in the United Kingdom and Ireland.

  Microsoft is aware of the issue with the Electronic Programming Guide for Windows Media Center in the United Kingdom and Ireland.  We have identified the cause and have already deployed a fix for the United Kingdom.  A solution for the Ireland is being prepared and we will post an update when the problem is resolved.

  We apologize for the inconvenience to Windows Media Center users in these countries.