Set the order in a tab tab

Similar Questions

• How can I change the order of open tabs?

  I currently have about a dozen tabs open, most need to be read in a particular order. Is it possible to change the order of these tabs? If not, hang a tabs without sliding laterally could become a method of 'release' of the selected tab, allowing it to be moved to the top or to the bottom of the list (I think that it looks like a good and especially easy and possible future addition to the app).

  Thanks for your time,
  Adam

  Adam, unfortunately at the moment it is not a feature of Firefox for Android. To move tabs, you will need to close and open them in the order you want them to appear.

  If this is a feature you want, however, I would recommend leaving your comments on this matter in input.mozilla.org.

• How to set the order of tabbing to the cells of a table?

  Is it possible so simple or short to change the order of the vote tabulator jumps in a table? For that first all cells in a row, and then in the next column are active or not.

  Hi Herr Lindemann,

  the easy way (rather) would be to use a structure of the event to capture quickly on the "tab" key and set the current cell by using nodes of property...

• How to set the order in the table in the ADF for a transitional attribute in the default sort t

  Guys,

  I have a VO with 2 columns, the column is transitional attribute.  In my jsff page, I got an af:table that displays the transition attribute.

  When the page is loaded for the first time, by default, transitional attribute values should be sorted in ascending order. Currently, the displayed values are not sorted. I need to click the sort button to sort the values. I need to change this behavior to sort automatically when the page is displayed for the first time.

  Question: How can I set the command to the table in the ADF for a transitional attribute of default sort?

  Note: I have to pragmatically, I can't use order by clause in my VO for the transitional attribute.

  Help, please.

  Thank you

  Rambaud

  Hi Rambaud,

  You can do the sorting "in memory".

  You can implement it like this:

  Get the VO and make sure that all required lines are extracted from the DB

  ....

  Sort the rows by transient attribute

  myVO.setSortBy ("TransientAttribute");

  read the current query mode

  int oldQueryMode = myVO.getQueryMode ();

  to sort in memory

  myVO.setQueryMode (ViewObject.QUERY_MODE_SCAN_VIEW_ROWS);

  myVO.executeQuery ();

  redefine the query mode on original value (only needed if you want to be able to get new lines of the DB)

  deadlineVO.setQueryMode (oldQueryMode);

  I hope this helps.

  Kind regards

  Linda

• Dynamically set the order of the symbols on the stage?

  Is it possible to change the order of the symbols on the stage dynamically via the coding?

  While clicking on a button would be a symbol on the back?

  The reason why I ask is because even if one of my symbols is set to invisible, it still hinders my ability to click on the buttons that are technically below.

  Any help would be appreciated.

  Thank you

  You can use the z-index with this basic format:

  SYM. $('NomSymbole') .css ({' z-index': 100 '});

• How do I set the order and position of Add ons in a simple toolbar add-on?

  I have several add-ons in the module bottom toolbar in firefox 4. I would like to arrange them in a specific order and justify to the right of the browser. Currently, they are on the left side of the bar of the add-on.

  When you're in the bar of tools customize mode there is a large Flexible space in the bar of the add-on, move all the icons of the add-on to the right of this Flexible white space and in the order you want. If one of these icons are locked together by a bright rectangle, these are the old icons in the Statusbar that can be ordered manually again and will be moved together as one group - the bad thing about Mozilla "grandfathering" old icons in the Statusbar.

• How to set the order of the login items

  Is it possible to control the order in which the elements of opening loading at startup? I have a called Snapz Pro who charge near the end, and for some reason it loads in 'active' mode (as if I clicked it), and I must escape out of it before I can use the computer. I thought that if I could get this to load at the beginning of the sequence, you can avoid this problem. Thank you.

  

  No OS X. You could look for a third-party utility, if it still exists.

  You can create a launchd plist that directs them. The plist will launch his own start-up, you can remove all of the login items list.

• Cannot rearrange the order of my tabs on the toolbar.

  I go to 'customize' and get down to the bottom of the window OK, but I'm stuck here. When I pass the hand 'capture' the favorite button and click, nothing happens, or the button turns into "new window". My Favorites are not visible, so I can't drag to the window to see what to do next. I'm not in full screen.
  I don't understand what I'm supposed to do once I get to this step. Thank you.

  You can only place "Bookmarks Toolbar items" on a toolbar using the Customize.
  
  You can drag bookmarks or a link on this toolbar (this toolbar) is reduced to an icon in the Customize mode.

  Then you should be able to drag a link to this folder.
  
  Bookmarks that appear on the need of the toolbar is located in the bookmarks toolbar folder.

  • https://support.Mozilla.org/KB/how-do-i-use-bookmarks

• Is there a way to set the order of the advanced actions?

  Hello.

  I try to set a peak action where an effect is applied to several objects, and then it climbs to a slide. Is it possible to define the action to make the jump from slide happen after effects?

  Here is a screenshot of the demo of what I'm looking for:

  

  I want each box of click to zoom out until the slide jump to another slide and the other 3 characters.

  I use 7 Captivate.

  Thank you.

  I have created an example, but used CP8, there will be a small difference for you in CP7. Those are the steps:

  • Create a variable user corresponding to each image that will follow if that one is clicked, a Boolean value with the default value of 0, branded the v_one, v_two... v_four
  • as I suspect you return to this slide, you need to reset all Boolean values enter; can be done with a tip action that affects 1 to each of the variables and don't forget the Continue statement as well
  • Make sure that the continue button has no suspension, and that the boxes to click on a break at 1 second before the end of the slide (1 second is the default duration of change of scale 0, what is the zoom effect)
  • I created a joint action for the areas of click, but since you can't define a variable as a parameter, you may use duplicates of the advanced actions:
    • Assign the v_one with 1
    • Apply the effect Image... Balance for x and Y, the value 0
    • Apply the effect Image... Balance for x and Y, the value 0
    • Apply the effect Image... Balance for x and Y, the value 0
    • Continue
  • Then created a conditional advanced action on the exit of the slide, with many decisions that you have variables, checks each variable and jump on this slide

• Discovers the order changed object nulls

  Hello

  If I create a simple view object, for example from an entity based on human resources. EMPLOYEE table and just include all attributes, and display criteria (pretty good default installation provided through the Wizard), then it is possible to define an "order by" clause by default, but with values NULL LAST (e.g. ORDER BY DESC NULLS LAST HIRE_DATE)?

  I use Studio Edition Version 12.1.3.0.0 and can not see how it can be defined, if, on the table "Query" in the editor view.

  
  Thank you.

  In the View object, select the request tab and uncheck the box 'calculation optimized Query... ". ». You can set the order by clause in the "order by" field

  Timo

• Control the order in which the tools are displayed

  Hello

  I have developed a number of folder level JavaScripts.  Each JavaScript displays a button to launch under the "additional tools".

  I was hoping that someone could tell me how I can control the order in which these buttons will be displayed.

  Buttons are displayed in alphabetical order according to the 'cLabel '?  If they are listed according to the date and time the file was created or modified?

  Is there an optional parameter to set the order?

  Thank you

  Linda

  Hello

  Actually, I figured out how to control the order in which appear the buttons below "additional tools".

  There is an optional parameter for app.addToolButton called NPO: which can be used.  I think that the lower the number used, the highest on the list, the button will appear.  This kind of work.  The list of buttons re - arrange themselves, but not exactly the way I wanted to.

  Another thing I did was to rename the JavaScript files. I went before the first file name with a '1 '.   The second file directly under the first I preceded it's name with a number '2' and so on.  That seemed to do the trick...

  All I had to do was probably to rename the JS files with the '1' and '13' numbers and buttons with appear correctly.

  Thank you

  Linda

• Break the order of substitution of my ORDER BY clause

  Hi Experts,
  
  I've created a report in Oracle 6i where I receive the ORDER BY clause at run time. And in the datamodel application, I use a lexical to tell parameter, column selected in the parameter order.
  
  The problem facing me, during execution, the ORDER BY clause is ignored by the report, and takes the column mentioned with the order break property as "Crescent" sort by this column.
  
  I'm not able to set the order property of break None for all columns, as Builder's mistake out asking me to have at least one column Asc or Desc value!
  
  Anyone know this problem before? Is there anyway to get rid of this and use the report by columns in the ORDER BY clause.
  
  Please note: I tried an explicit BY < columnname > ORDER in the query data model, but again the report uses the value of the mentioned pause command and sorts by that column.
  
  Appreciate your help on the same.
  
  Thank you!

  Hello

  There is a simple rule, how it works. For each query, you have one or more groups (hierarchical) in the data model. For the lowest group ORDER BY is selected for sorting and for groups, not be the lowest group, the ORDER of ROMPRÉ is chosen (and vice versa ignored).

  Concerning
  Rainer

• How to customize the order of music files in the folder (no not with artist, album, #, genre or classification tabs)

  I'm trying to transfer a playlist from Itunes on a folder, but I can't understand how to keep the order of the songs as I had them in the Itunes playlist.  I can't get files .mp3 alphabetically for the artist, album or genre.  Or according to numerical order by track number # or rating.  Any help in this regard would be highly appreciated.

  Here's how to change the default template for a folder: http://www.vistax64.com/tutorials/70819-windows-explorer-folder-view-settings.html.  Default behavior is to select the model based on the first type of file placed in the folder (you must choose something).  Vista sets the folder type template according to what are the types of files in the window and the settings display window Explorer. This will show how to reset the display settings for the Windows File Explorer, disable Automatic folder Type Discovery (which is I think what you want)and increase the folder display the cache to make Vista do not forget the display settings, the folder type template, the size or the position of a specific window for when it was still closed to the location of specific path.

  It does not work with the Sub record under, Open with, open in a new tab (Internet Explorer), etc... dialog windows of type through the good File menu bar item. These don't seem to be able to have their size or their position to recall. For the latter, you can use the free program http://autosizer.en.softonic.com/ to resize them.

  Here is another article on how to modify the columns in Windows Explorer and sort in Vista: http://www.vistax64.com/tutorials/108665-column-customize.html.  This will show you how Add, Remove, move, change the widthand change the sort order of the columns in Windows Explorer in the way that you want.

  Here is another article on how to change the display of the default folders in Vista (but she argues, it is not a perfect solution and can revert to the previous behavior is not as good as the two prior links provided: http://news.cnet.com/8301-13880_3-10019957-68.html.)

  I hope this helps with your situation - it may take more than one item to come up with the solution - but I would start with paragraph 3.

  Good luck!

  Lorien - MCSA/MCSE/network + / A +.

• How to set the new tab to open a homepage

  After the recent update to version 44.0.1 I lost the ability to open a new tab and open the new tab homepage. Someone can help me.

  Thank you

  Do you mean when you open a new tab, you want to see your regular home page instead of the page of the new integrated tab on Firefox?

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the "Restorer of classic theme" or "Tab Mix Plus" extension: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/
  • If you want the cursor to move in a search box in the page: Try https://addons.mozilla.org/firefox/addon/custom-new-tab/

  Use only one of these methods at the same time, otherwise there may be conflicts and dysfunctions.

  Setting up substitute new tab and new tab custom

  After installing one of these extensions, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab replace or custom new tab and click on the Options button. (See first screenshot attached).

  New tab Override

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Custom new tab

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See third screenshot attached). I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Success?

• I want to set the default url of all new additional tabs I have open - how please?

  When I'm already browing and I choose to open a new tab opens on the Yahoo search engine, and I don't see how to change this. I want to open with google.co.uk. The first page is the default in Firefox and it works very well - it's just the extra legs that are the problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can watch the pref browser.newtab.url the topic: config page and set this pref to the URL of your preferred the new tab page.
  You can use these special pages or set the pref to the URL of your preferred the new tab page.

  • the new default tab with the tiles page is on: newtab
  • the default homepage is Subject: Home
  • to a blank page, you can use Subject: vacuum

  The pref browser.newtabpage.enabled must be set to true to use the page defined through browser.newtab.url like the new tab page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config