set the password for the 'parameters' on iphone 5

Y at - it app to set a password for the "parameters" on an iphone 5?  My son continues to change some of the parameters,

N ° define a word password on the phone and don't let not your son play with him.

Tags: iPhone

Similar Questions

  • How can I set a password for firefox so that everyone must enter the password before running firefox

    My younger sister run my firefox just to this afternoon (she origin use IE), and she saw something that is not visible. How can I set a password for firefox so that everyone must enter the password before running firefox?

    Another option is the master password + extension.

    You must first make sure that Firefox uses a master password, for more details on how to do that see use a master password to protect stored logins and passwords. Then with the master password + extension in its options, go to the getting started section and make sure that "ask for password at startup" and "Exit if cancelled" is selected both.

    As with all extensions, this protection is quite weak and can be bypassed if start you Firefox in safe mode that disables extensions.

  • How to set a password for the networks?

    Original title: related networks

    Hi, my request is how to set a password for networks

    Hello Manu,

    I suggest to follow the steps below and check the steps in the section to change the homegroup password , if it helps.

    Homegroup from start to finish

    http://Windows.Microsoft.com/en-us/Windows/HomeGroup-help#HomeGroup-start-to-finish=Windows-81&V1H=win81tab7&V2H=win7tab1

    Let us know the status.

  • How to set the parameters of the Justification

    Hello

    I'm trying to set the parameters of the justification of a paragraph using a different Set of IJustificationStyle accessor methods, but the paragraph does not reflect the changes I put in the Set accessor methods. I can see using the IJusificationStyle-> GetWordspace method that the value has been changed.

    I tried to recompose the wax using IFramelistComposer-> RecomposeThruNthFrame() method after setting the values, but still the paragraph will not reflect the change in values.

    Any help is much appreciated, thank you!

    -Jeff

    Treat existing attributes that you got through query... () as readonly.

    For changes, use a command. See for example BuildApplyTextAttrCmd, Mike post.

    Dirk

  • Setting the parameters of the server cache search

    In the cluster manager of research under Administration utilities of the World Coal Institute in the console of the WCI portal, we see a warning messages like below:

    Docset - used cache size does not match the recommended size for this configuration
    -Used Index cache size does not match the recommended size for this setting

    How to set the cache of search server settings?

    Go to $ALUI_HOME/ptsearchserver/10.3.0/server_name/config

    In node.ini, set the parameters below:

    # Of the cache directory: 1000MB
    RF_INDEX_CACHE_BYTES = 1048576000
    # Docset hiding: 333 MB
    RF_DOCSET_CACHE_BYTES = 349175808

    Restart the search service and check in the search of portal application server cluster manager

  • Error when setting the parameters on the tool

    Hi experts,

    I want to use ODIsqlunload, but it still gives the error. My win7 OS

    error:

    oracle.odi.oditools.OdiToolInvalidParameterException: error when setting the parameters on the tool
    at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:620)
    at com.sunopsis.dwg.function.SnpsFunctionBase.getSunopsisApi(SnpsFunctionBase.java:494)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeOdiCommand(SnpSessTaskSql.java:1415)
    at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:32)
    at oracle.odi.runtime.agent.execution.cmd.OdiCommandExecutor.execute(OdiCommandExecutor.java:1)
    at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2906)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2609)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:540)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:453)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1740)
    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ 2.doAction(StartSessRequestProcessor.java:338)
    at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:214)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:272)
    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$ 0 (StartSessRequestProcessor.java:263)
    to oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$ StartSessTask.doExecute (StartSessRequestProcessor.java:822)
    at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:123)
    to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:83)
    at java.lang.Thread.run(Thread.java:662)
    Caused by: java.lang.Exception: ODI-30044: invalid parameter:-file
    at com.sunopsis.dwg.function.SnpsFunctionBase.actionSetParameters(SnpsFunctionBase.java:251)
    at com.sunopsis.dwg.function.SnpsFunctionBase.setParameters(SnpsFunctionBase.java:799)
    at com.sunopsis.dwg.function.SnpsFunctionBase.getCoreOdiTool(SnpsFunctionBase.java:616)
    ... 18 more

    and the code is:

    "SnpsSqlUnload «-file=F:\temp/data_6001_1001.dat" "-driver oracle.jdbc.OracleDriver =" «-URL=jdbc:oracle:thin:@musty-Pc:1521:XE "-user = system-pass = < @= snpRef.getInfo ("SRC_ENCODED_PASS") @ > - file_format variable = - charset_encoding = UTF8 '-row_sep = \n" "-date_format = YYYY-MM-DD '-fetch_size = 1000 '-field_sep = #
    Select / * + * /.

    columns...
    table...
    where (1 = 1)

    I have try this - settings file:

    F:\data_6001_1001.dat
    F:\test.txt
    C:\Test\test.txt
    C:/data_6001_1001.dat
    C:\test/data_6001_1001.txt
    c:/test/data_6001_1001.txt
    C:\test/data_6001_1001.dat

    all of them same result :(

    Please help me experts :(

    Hi experts, I have solved my problem :))

    my code like this:

    "SnpsSqlUnload «-file=F:\temp/data_6001_1001.dat" "-driver oracle.jdbc.OracleDriver =" «-URL=jdbc:oracle:thin:@musty-Pc:1521:XE "- user = system-pass =<@=snpRef.getInfo("SRC_ENCODED_PASS") @=""> - file_format variable = - charset_encoding = UTF - 8 '-row_sep = \n" "-date_format = YYYY-MM-DD '-fetch_size = 1000 '-field_sep = #
    Select / * + * /.

    But it's really strange! I change only the file--> FILE and driver---> DRIVER and row_sep--> ROW_SEP and etc...

    I don't know why, but they should be higher. I did on linux OS 64 bit and no mistake.
    But win7 it gave me error.

    I thik it's a bug...

  • How to set a password for the router in mn 700?

    I have a MN-700 router and want to set a password so that other people can not access my connection. Can u please provide an astep step-by-step, instructions how to do it. Thank you.

    This is not a forum for the MN-700 router. You have to go to the manufacturer's Web site and look for the instructions or ask their support desk.

  • I want to set a password for the Toshiba StorE Art3 500

    Dear Sirs,

    Toshiba storE Art3 500 GB external hard drive, I bought and I have the following problem: I would firstly a password for opening, but hard drive ever asks me the password.

    Pls let me know what I need to do that he asks me a password for opening of the disc, or when you open the files stored.

    Thanks in advance.

    Hi mate

    AFAIK the Toshiab STOR. E ART 3, 2.5 "includes pre-loaded® NTI BackupNow EZ Software.
    http://www.nticorp.com/en/us/product/backup_now_ez.asp

    This software helps you secure and back up data. It provides a system and file & folder backup complete.

    It seems that only the backup can be secured with data encryption and protection of password (up to 256 - bit).

    Check this box:
    http://www.Toshiba-multimedia.com/global/manuals/store/datasheet/STORE_Art3_Datasheet.PDF

  • I need to recover the password for AOL from my iPhone 6

    I need to enter the password for my AOL on my Mac account. The password works on my iPhone6. How can I get to use on my MAC? At the moment, I can only access my email via my phone.

    You can not, you must retrieve it from AOL.

  • How to set the parameters of "Configuration ThinPro" via the HP Device Manager

    Hello

    Maybe I'm blind, but how can I set the settings in "Setup ThinPro', accessible from

    ThinPro Control Center-->

    Control Panel-->

    Setup-->

    Configuration ThinPro

    through the HP Device Manager? These parameters allows to use a very strict kiosk mode, which we want to deploy. So far I found just to solve this problem through a complete picture, but this isn't a solution for me.

    I hope that I have forget something or you have another clue.

    Concerning

    Looks like there is no direct way via the HP Device Manager. Now, I manually configure a thin Client and save the registry.xml that I can ride with other devices.

    Concerning

  • Who need to know what to set the parameters of memory to

    I get an error message telling me that I am low on virtual memory & I continued the Control Panel & learned to where I need to change the # s custom size. Can I put the max, which is 1314? 670 is advisable, & 672 is allocated.

    I get an error message telling me that I am low on virtual memory & I continued the Control Panel & learned to where I need to change the # s custom size. Can I put the max, which is 1314? 670 is advisable, & 672 is allocated.

    A good size for the virtual memory is 1 and 1/2 times the physical RAM real.

    Others have different ideas.

    But most of the time, it is easier to leave it up to Windows to manage virtual memory.

    http://Windows.Microsoft.com/en-AU/Windows-Vista/change-the-size-of-virtual-memory

    Read the info above from Microsoft.

    Change the size of virtual memory

    If you receive warnings that virtual memory is low, you need to increase the minimum size of your pagefile. Windows sets the initial minimum size of the paging file to the RAM memory (RAM) installed on your computer plus 300 megabytes (MB) and maximum size of 3 times the amount of RAM installed on your computer. If you see warnings at these recommended levels, and then increase the minimum and maximum sizes.

    1. System opened by clicking on the button start , clicking Control Panel, clicking system and Maintenance and then click System.

    2. In the left pane, click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    3. On the Advanced tab, under performance, click settings.

    4. Click the Advanced tab, and then under virtual memory, click on change.

    5. Claire runs it automatically the size of pagefile for all drives check box.

    6. Under drive [Volume name], click the drive that contains the paging file that you want to change.

    7. Click Custom size, type a new size in megabytes in the initial size (MB) or maximum size (MB) box, click on set and then click OK.

    Increases in size usually don't require a restart, but if you decrease the size, you will need to restart your computer for the changes to take effect. We recommend that you do not disable or delete the paging file.

    See you soon.

    Mick Murphy - Microsoft partner

  • How to set the parameters of scanning on Officejet 6500 connected to a Mac?

    I'm trying to scan documents and pictures using the following:

    Scanner: HP Officejet 6500 E710n-z all-in-one
    Computer: Macbook Pro retina
    Operating system: OS X mount Lion
    Application: "HP Scan" (this application was provided by HP)

    Whenever I have analyze anything, it comes out in grayscale at 300 dpi resolution.  At least, this is what HP Scan tells me when I click on the "Info" button in the lower right.

    I would like to be able to scan things in color rather than just in grayscale, and I wish I could choose the resolutions other than 300PPI.  But I looked everywhere in the graphical interface of the HP scanning application, and I can't find anywhere to adjust these settings.

    Did anyone here know how to change these settings?

    Unfortunately, the link you provided is a version of the software much older than what I have currently installed.

    HP_Installer_Inkjet_Full_Group02_10.3.dmg was published on 14/09/2009, and it is intended for OS X 10.6, aka Snow Leopard.  When I installed the printer installation CD had software pretty much at this time, and he refused to install on MTN. Lion.  Instead it asked me to download the latest version from the HP website.  What is installed on my machine is a file named HP_Mountain_Lion_Ink_SW_v12.23.18.dmg.  Unfortunately, I neglected to save the URL I downloaded from, and I can't seem to find him.  But I saved a copy of the .dmg file in case I ever need to reinstall.

    Meanwhile, I managed to find the answers on my own.  Part of my problem is that, although I'm fairly familiar with Linux and Windows, I am new to the GUI of Mac and his metaphor interface and GUI desktop is different, enough of these I'm familiar with what my instincts are sometimes not a lot of help.  Then, it took me days to notice the only critical button that made all the selections, I was looking for visible.

    HP Scan DO allows you to set things like the Type of Scan (photo or Document), Mode (color, grayscale, black & white), resolution and a number of other parameters.  But we must first click on the "Scan" button... ", and then click on the widget of the arrow to the right of the selection of the Scanner.  By clicking on the arrow pointing downwards in fact all other settings appear.

    If you change the Type of Scan of photo of the Document, it automatically changes color in grayscale Mode, which does not want to create a color PDF.  But you can change the Mode back to color.  And you can save this document as a PDF searchable to call the I.R.I.S. OCR software on it.

    To create a multiple page PDF, or let the software analyzes all sheets in the document feeder, or place another page on the window and click on the button 'Add' in the lower left corner of the window, how it displays the same dialog box that is displayed when you click 'Scan '. ».  You can click on the arrow down and change the settings for each page or leave them alone and they will remain the same as the parameters of the previous page.

    When you have analysed all the pages that you want in a single document, click 'send '.  This displays the usual selection of files box.  At this point, if you set the 'Searchable PDF', or 'PDF' format a checkbox will appear marked "save all items in a single file.

    Thus, it seems that HP Scan works with MTN. Lion, it provides all the features that Capture of Image and seen I.R.I.S. integrated in it, it provides OCR features that Capture of Image is not.

  • Set the parameters of the event

    I need set the rendering of the event parameters. Support file not found how together make it parameterized.

    Hello

    I assume you are using JSR168 portlets and try to set the rendering parameters when you receive an event? If so, you can do that from the backup file. you will need to handle the event in your portlet instead of a backup file. For example, the following code would go in your portlet java source:

    Import javax.portlet.ActionResponse;
    Import javax.portlet.ActionRequest;
    import com.bea.netuix.events.Event;

    SerializableAttribute public class JavaPortlet extends GenericPortlet
    {
    ...
    This method will receive the event. It can have any name, but must
    have this signature
    ' Public Sub handleEvent (request, response ActionResponse ActionRequest,
    Event event)
    {
    Insert here the code of the event management
    To set a report parameter, make calls like this:
    response.setRenderParameter ("paramName", "paramValue");
    }
    ...
    }

    Then, in your .portlet file rather a tag for "invokeBackingFileMethod", use the "invokeJavaPortletMethod" tag and specify the name of the method to call, as did the "invokeBackingFileMethod".

    Kevin

  • setting the parameters of serial port VISA does not persist

    When I set the baud rate using the VISA's Interactive Control Panel for a serial port specific (ASRL) and then close the window for ASRL, baud rate goes back to the default value.  Why doesn't baud rate?

    Also when I change the port settings for a particular serial port (COM) on the side of Windows, why can't I see these same port settings when I look at them from the interactive panel of VISA?

    Also, when I set by programming the output baud rate for a particular ASRL (code C), why is it reset by default when I re - run my program and do a get on baud rate?

    Some information:

    My C program works on an industrial PC which has a PXI MXI connected to it expansion chassis.  Series 3 cards in the expansion chassis.

    When you close the VISA session and/or close your application, port settings in the system default values.  It is a very normal behavior.  As long as you keep your open VISA session, the port will behave how you already told (set Baud Rate, etc.).

  • How to set the parameters of release of flash 10.1

    Hello

    In the last Flash Professional CC, you can set the document to Flash 10.3 and more, but to download a Flash banner for advertisers, for example Google, it should be Flash 10.1 or lower.

    I see no possibility of downgrade my 10.1 file or lower.

    What should I do to fix this?

    Thanks in advance.

    GR, Marco

    Re: Flash Pro CC can publish for flash player 9?

Maybe you are looking for