Set the timeout 30 sec in UTL_HTTP in Oracle 11 g

Hi friends,

Calling a Web service as below. could you please guide me how to timeout if we do not get the answer for more than 30 seconds.

using UTL_HTTP, how could do us that.

Please give me a code example.

Please let me if you have any questions.

Thank you and best regards,

Arun Thomas T

I don't see anything below.

You can look at set_transfer_timeout, which you could have found by reading the docs or Google

Tags: Database

Similar Questions

How to set the timeout of read when using channelReader.ReadWaveform?

I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired. To wait for the samples become available use longer read timeout... »

No problem, I thought, I'll just put a longer period. I searched through the documentation, and the timeout only I found was the watchdog timeout. When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

How to set the timeout so that ReadWaveform() is not the time?

Here is the code:

privateAnalogMultiChannelReaderchannelReader;

privateAnalogWaveform awf;

publicList GetWaveForm()

{

Try

{

Task getWaveform = newTask();

getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

RangeMaximum, AIVoltageUnits.Volts);

getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

SampleQuantityMode.FiniteSamples, NumSamples);

getWaveform.Control (TaskAction.Verify);

channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

AWF = data [0];

samples As new List();

for (inti = 0; i)

returnsamples;

}

catch (DaqExceptionexception)

{

MessageBox.Show (exception. (Message);

}

List of l = newList();

return l;

}

Thank you

Curt

Hi Curt,.

Here is a Knowledge Base that can help you to set the timeout setting in your code:

The property using Timeout of DAQmx task in Visual Studio

How to set the timeout property Web Service partner link in the new version of the SOA Suite, it is missing

Hello
I have a use case in which I'll call synchronous external Web Service and the form of this service, I get the answer after 80 seconds.
I know that this console form EM soa-infra-> SOA Administration-> BPEL proprieties-> under 'more BPEL Configuration Properties..' in SyncMaxWaitTime can I change the default 45 second in 80 seconds, but it will apply to all synchronous services in this area, and I want only the value appeal of Web Service of particular external reference (link partner).
For the limit of timeout for the particular web service (partner of external reference link):
I saw a post at < http://www.mandsconsulting.com/asynchronous-vs-synchronous-bpel-processes > in which there is an option in 'Link partner Edit' form property tab dialog box, we can add "timeout" property but in SOA Suite11.1.1.7 I am not able to find this property form the list.
on this post < http://abhishek-soablog.blogspot.in/2010/06/timeout-for-partnerlink.html > is also described the same way, but it's just the source code of the highest way of GUI to set the timeout property and it does not work with a new version.
Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).
Thank you

Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

VR;

Click em-> composite-> Services and references-> select need to reference and click on-> properties: 'HTTP Timeout of read' and 'HTTP timeout.

developing composites:

Click on a reference-> property inspector-> link properties-> plu green and add oracle.webservices.httpConnTimeout with the necessary value and oracle.webservices.httpReadTimeout with the necessary value

for the same domain defined: oracle.webservices.local.optimization = false

You can watch

Administration of Web Services - 11g Release 1 (11.1.1.7)

How to set a timeout for a Web Service in SOA 11 g (Doc ID 979683.1)

SOA 11 g: political malpractice not to intercept 'service Endpoint unreachable' error (Doc ID 1503989.1)

How do I get the time to stick after you set the timeOut remaining property

Hello
Is it possible to get the remaining time to stick after the timeOut parameter, or do I have to manage a separate clock for this?
After this excellent tutorial here ice http://tv.adobe.com/watch/adc-presents/create-shared-forms-in-livecycle-collaboration-serv /

It's no big deal - just to extend BatonProperty and replace the instantiation of

the wand with your stick extended, then add a Get accessor that returns that new

Get accessor, you added to Baton...

Nigel

How to set the timeout for the INITIAL LOAD EXTRACTED?

Hi all
GG 11.2 SQLserver2008
I extract a single large table size of 20 G., but it seems I hit the limit of timeout? Or another resource limit? Or I do not know if.
Here is my error:
2013-06-22 15:43:36 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error 0 (operation ends with success.) get position in d:\GGora\dirdat\ex.
2013-06-22 15:43:36 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error 0 (operation ends with success.) get position in d:\GGora\dirdat\ex.
2013-06-22 15:43:36 INFO OGG - 01085 Oracle GoldenGate for Oracle Collector: the server received window closed event.
2013-06-22 15:43:36 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error 0 (operation ends with success.) get position in d:\GGora\dirdat\ex.
2013-06-22 15:59:38 INFO OGG - 00963 Oracle GoldenGate for Oracle, Manager MGR.prm: command received from EXTRACT on host DTC - PC.domain (START SERVER CPU-1 PRI-1 TIMEOUT 300 PARAMS).
2013-06-22 15:59:39 INFO OGG - 01677 Oracle GoldenGate for Oracle Collector: pending (dynamically assigned) connection.
2013-06-22 15:59:39 INFO OGG - 00963 Oracle GoldenGate for Oracle, Manager MGR.prm: command received from host DTCKalayaan-PC (REPORT 1280 7819) SERVER.
2013-06-22 15:59:39 INFO OGG - 00974 Oracle GoldenGate Manager for Oracle, MGR.prm: Manager started the collector process (Port 7819).
2013-06-22 15:59:39 INFO OGG - 01228 Oracle GoldenGate for Oracle Collector: Timeout 300 seconds.
2013-06-22 15:59:44 OGG - 01229 Oracle GoldenGate for Oracle Collector INFO: connected to DTC - PC.domain:56507.
2013-06-22 15:59:44 OGG - 01669 Oracle GoldenGate for Oracle Collector INFO: opening d:\GGora\dirdat\ex (byte 0, EOF current 0).
2013-06-22 16:06:33 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error 0 (operation ends with success.) get position in d:\GGora\dirdat\ex.
2013-06-22 16:12:08 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error 0 (operation ends with success.) get position in d:\GGora\dirdat\ex.
2013-06-22 16:12:08 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error 87 (the parameter is incorrect.) get position in d:\GGora\dirdat\ex.
2013-06-22 16:12:08 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error getting file for d:\GGora\dirdat\ex position (87, the parameter is incorrect.).
2013-06-22 16:12:08 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error getting file for d:\GGora\dirdat\ex position (87, the parameter is incorrect.).
2013-06-22 16:12:08 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error getting file for d:\GGora\dirdat\ex position (87, the parameter is incorrect.).
2013-06-22 16:12:09 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error getting file for d:\GGora\dirdat\ex position (87, the parameter is incorrect.).
2013-06-22 16:12:09 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error getting file for d:\GGora\dirdat\ex position (87, the parameter is incorrect.).
2013-06-22 16:12:09 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error getting file for d:\GGora\dirdat\ex position (87, the parameter is incorrect.).
2013-06-22 16:12:09 OGG - 01223 Oracle GoldenGate for Oracle Collector WARNING: error getting file for d:\GGora\dirdat\ex position (87, the parameter is incorrect.).
Where should I put the limit?
Thank you
zxy

Sorry, misread the part 'server' in what you use. Data Pump is Oracle, MSSQL not. But, you can do a dump of csv data, and then use SQL * Loader. Alternatively, use the CSV (one for each table, a bit heavier) files in the form of external tables.

4 GB is worth considering:

The EXTFILE parameter to specify a file extracted, which is a local file that will be read by

a group of extract from pump data on the local system, or to specify a replicate file extracted local

bed when SPECIALRUN is used. The size of an extracted file must not exceed 2GB.

[ADF, JDev12.1.3] How/where to set the session timeout

Hallo,
After a few minutes of inactivity, the browser displays a message to inform that the session is not more active and only OK been must be clicked to refresh the page.
If a dialog box "btf" has been opened on the left, it becomes...
I would like to know what is the right place/method to set a deadline.
If possible I would like that when the timeout checks, the application performs a redirect to a page I like (for example the login page).
The application of ADF Essentials and is deployed to the GlassFish application server.
My concern is... what should happen to the open operation / pending when the time-out occurs?
For example, the user is modifying an af:table but it has not clicked validate or cancel...
Thank you
Federico

I would like to know what is the right place/method to set a deadline.

For java web applications, you can set the session timeout in the web.xml file. (this is the global settings associated with all sessions)

If you wish, you can set the timeout of session by program (and this is related only to the current http session).

If possible I would like that when the timeout checks, the application performs a redirect to a page I like (for example the login page).

http://fortunefusionminds.blogspot.com/2014/04/how-to-redirect-to-custom-page-whenever.html

ADF: Session expires management redirect to login page | Bungbutan

ADF developers World: Detection and handling of user session expiry

My concern is... what should happen to the open operation / pending when the time-out occurs?

Well, session is destroyed, it will destroy all instances of AM and do rollback.

See also: Andrejus Baranovskis Blog: ADF BC Application Module Instance Timeout and reliance Timeout of Session Web

Dario

Set URL timeout

How to set the timeout for connecting to a URL?

The time-out period BEFORE Firefox reports 'not found '.

There is no setting in Firefox to do this. Modify a TCP/IP parameter in the registry.

http://drewthaler.blogspot.com/2005/09/changing-DNS-query-timeout-in-Windows.html

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\DNSQueryTimeouts
Multiple string: '0 1 2 2 4 8'-> "4 8 8 16 32 0".

How to set the simultaneous request completed with warning?
Hi all:
How to set the simultaneous request completed with warning in oracle 11.5.9?

For example:

I completed an application with "Completed" 'Normal '.
After I put a condition similar to when xxx > 0 then
It will complete a request indicates 'Complete' 'warning '.

My environment is: oracle 11.5.9 and operating system is Linux Redhat 4.0

Concerning
Terry
Terry,

You can use 'FND_CONCURRENT. Function SET_COMPLETION_STATUS.

Note: 866194.1 - is there a method to return a 'Warning' to host Language simultaneous program status?

The Oracle Applications Developer's Guide
http://download-West.Oracle.com/docs/CD/B11454_01/11.5.9/Acrobat/115devg.PDF

FND_CONCURRENT. SET_COMPLETION_STATUS
http://forums.Oracle.com/forums/search.jspa?threadID=&q=FND_CONCURRENT.SET_COMPLETION_STATUS&objid=C3&DateRange=all&userid=&NumResults=15&rankBy=10001

Thank you
Hussein

How to replace the timeout set on the message in Weblogic 10.3.3
Life is set on the message by the message producer. The message is sent to a Destination imported FAS in a field and then transmitted to the destination stone on another remote server in Weblogic.
The value of life is defined as 7 days on the message of the message producer. I would like to replace with a much shorter duration. The following steps have been completed,
1A allowed SAF SAF destination queue default Time-to-Live
2 FAS by default, Time-to-Live is set to 10 seconds on the destination queue parameters
3. set the default Time-to-Live to 10 seconds for the factory of connections in queue on the remote server (where the destination queue)
But the message expiration date remains that 7 days, the original value. I missed something? How can this be accomplished?

Thank you
Hong
Hmm, it should work then. Do you have any substitution of time-to-live on the remote destination?

Run-time error when you set the textFlow to a TextArea with specific size

Hi all
When you try to set the textFlow of a Textrea with a specific size (412 x 258) the flash player crashes due to a loop of 15 sec. Could you please help me on this?
Please find the code below:
<? XML version = "1.0" encoding = "utf-8"? >
< s:Application
' xmlns:fx = ' http://ns.Adobe.com/MXML/2009 "
xmlns:s ="
Library://ns.Adobe.com/Flex/spark "
xmlns:MX ="
Library://ns.Adobe.com/Flex/MX "minWidth =" 955 "minHeight =" 600 "
creationComplete = "init ()" "
>
< fx:Script >
<! [CDATA]
Import flashx.textLayout.conversion.TextConverter;
private " var tfText:String = ' < TextFlow columnCount ="inherit"columnGap ="inherit"columnWidth ="inherit"lineBreak ="inherit"paddingBottom ="inherit"paddingLeft ="inherit"paddingRight ="inherit"paddingTop ="inherit"verticalAlign ="inherit"whiteSpaceCollapse ="preserve"xmlns ="http://ns.adobe.com/textLayout/2008"> < p color ="#000000"direction ="ltr"fontFamily ="Arial"fontSize = '12' justificationRule = ="auto"justificationStyle = 'auto' kerning 'auto' leadingModel = 'auto' paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = '0' paragraphStartIndent = '0' textAlign ="justify"textAlignLast ="DΘmarrer' textIndent = '0' textJustify = "interWord" trackingRight = '0' > < alignmentBaseline span = "useDominantBaseline" backgroundAlpha = '1' backgroundColor = "transparent" baselineShift = '0' = 'auto' = "horizontalStem" color = cffHinting breakOpportunity "#000000" digitCase = 'default' digitWidth = 'default' dominantBaseline = "auto" fontFamily = "Arial" fontLookup = "embeddedCFF" fontSize = "11" fontStyle = 'normal' fontWeight = 'normal' kerning = "auto" ligatureLevel = 'common' lineHeight = "120%" crossed out = 'false' local = "en" renderingMode = "cff" textAlpha = "1" textDecoration = "none" textRotation = "auto" trackingLeft = '0' trackingRight = '0' typographicCase = "default" > THE VAGUENESS NEW BEAUTIFUL < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" = "auto" paragraphEndIndent = leadingModel "" ""» "0" paragraphSpaceAfter "0" = paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = "DΘmarrer' textIndent = '0' textJustify ="interWord"trackingRight = '0' > < span alignmentBaseline ="useDominantBaseline"backgroundAlpha ="1"backgroundColor ="transparent"baselineShift = '0' breakOpportunity ="auto"cffHinting ="horizontalStem"color ="#000000"digitCase = 'default' digitWidth = 'default' dominantBaseline ="auto"fontFamily ="Arial"fontLookup ="embeddedCFF"fontSize ="11"fontStyle ="italic"fontWeight ="normal"kerning ="auto"ligatureLevel = lineHeight 'common' ="120% "bar ="false"local = 'fr' renderingMode ="cff"textAlpha ="1"textDecoration ="none"textRotation = 'auto' = '0' = '0' trackingRight trackingLeft typographicCase ="default"> how can I Learn to love the non-predictability of the world ? < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = "DΘmarrer' textIndent = '0' textJustify ="interWord"trackingRight = '0' > < span alignmentBaseline ="useDominantBaseline"backgroundAlpha ="1"backgroundColor ="transparent"baselineShift = '0' breakOpportunity ="auto"cffHinting ="horizontalStem"color =" #000000 "digitCase = 'default' digitWidth = 'default' dominantBaseline ="auto"fontFamily ="Arial"fontLookup ="embeddedCFF"fontSize ="11"fontStyle = 'normal' fontWeight = 'normal' kerning ="auto"ligatureLevel = '". " common lineHeight"="120% "crossed out = 'false' local ="en"renderingMode ="cff"textAlpha ="1"textRotation ="auto"trackingLeft = '0' trackingRight = '0' typographicCase ="default"> < p color =" #000000 "direction ="ltr"fontFamily ="Arial"fontSize ="12"justificationRule ="auto"justificationStyle = 'auto' kerning ="auto"leadingModel ="auto"paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore ="0"paragraphStartIndent ="0"textAlign ="justify"textAlignLast ="DΘmarrer' textIndent = '0' textJustify = "interWord" trackingRight = '0' > < span alignmentBaseline = "useDominantBaseline" backgroundAlpha = "1" backgroundColor = "transparent" baselineShift = '0' breakOpportunity = "auto" cffHinting = "horizontalStem" color = "#000000" digitCase = ""» default"digitWidth = 'default' dominantBaseline ="auto"fontFamily ="Arial"fontLookup ="embeddedCFF"fontSize ="11"fontStyle = 'normal' fontWeight = 'normal' kerning ="auto"ligatureLevel = lineHeight 'common' ="120% "bar ="false"local = 'fr' renderingMode ="cff"textAlpha ="1"textRotation ="auto"trackingLeft = '0' trackingRight = '0' typographicCase ="default"> nothing is as it is forever. Over and over again, everything changes. Again and again, the unexpected happens, chaos breaks out constantly. Things never remain in order, things can never be effectively planned! < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = "DΘmarrer' textIndent = '0' textJustify ="interWord"trackingRight = '0' > < span alignmentBaseline ="useDominantBaseline"backgroundAlpha ="1"backgroundColor ="transparent"baselineShift = '0' breakOpportunity ="auto"cffHinting ="horizontalStem"color =" #000000 "digitCase = 'default' digitWidth = 'default' dominantBaseline ="auto"fontFamily ="Arial"fontLookup ="embeddedCFF"fontSize ="11"fontStyle = 'normal' fontWeight = 'normal' kerning ="auto"ligatureLevel = '". " «"common' lineHeight =" 120% "bar ="false"local = 'fr' renderingMode ="cff"textAlpha ="1"textRotation = 'auto' = '0' = '0' trackingRight trackingLeft typographicCase ="default"> < p color =" #000000 "direction ="ltr"fontFamily ="Arial"fontSize ="12"justificationRule ="auto"justificationStyle = 'auto' kerning ="auto"leadingModel ="auto"paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore ="0"paragraphStartIndent ="0"textAlign ="justify"textAlignLast ="DΘmarrer' textIndent = '0' textJustify = "interWord" trackingRight = '0' > < span alignmentBaseline = "useDominantBaseline" backgroundAlpha = "1" backgroundColor = "transparent" baselineShift = '0' = 'auto' = "horizontalStem" color = cffHinting breakOpportunity "#000000" digitCase = "" ""» "default" digitWidth ="default" dominantBaseline = "auto" fontFamily = "Arial" fontLookup = "embeddedCFF" fontSize = "11" fontStyle = 'normal' fontWeight = 'normal' kerning = "auto" ligatureLevel = lineHeight 'common' = "120%" left = "false" local = 'fr' renderingMode = "cff" textAlpha = "1" textRotation = "auto" trackingLeft = "0" = "0" = "default" typographicCase trackingRight > the problem of contingency, of non-predictability of the personal and professional development, is problematic for many people. Constantly, they consider themselves questioned existentially. – Delite describes six effective ideas to overcome this problem. With a new attitude to this problem: < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = "DΘmarrer' textIndent = '0' textJustify ="interWord"trackingRight = '0' > < span alignmentBaseline = backgroundAlpha"useDominantBaseline"="1"backgroundColor ="transparent"baselineShift = '0' breakOpportunity ="auto"cffHinting ="horizontalStem"color ="#000000"digitCase = 'default' digitWidth = 'default' dominantBaseline ="auto"fontFamily ="Arial"fontLookup ="embeddedCFF"fontSize ="11 ". fontStyle = 'normal' fontWeight = 'normal' kerning = "auto" ligatureLevel = 'common' lineHeight = "120%" left = 'false' local = "en" renderingMode = "cff" textAlpha = "1" textRotation = 'auto' = '0' = '0' trackingRight trackingLeft typographicCase = "default" > < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = "DΘmarrer' textIndent = '0' textJustify ="interWord"trackingRight = '0' > < span alignmentBaseline ="useDominantBaseline"backgroundAlpha ="1"backgroundColor ="transparent"baselineShift = '0 '. breakOpportunity = "auto" cffHinting = "horizontalStem" color = "#000000" digitCase = 'default' digitWidth = 'default' dominantBaseline = "auto" fontFamily = "Arial" fontLookup = "embeddedCFF" fontSize = "11" fontStyle = 'normal' fontWeight = 'normal' kerning = "auto" ligatureLevel = 'common' lineHeight = "120%" left = "false" local = 'fr' renderingMode = "cff" textAlpha = "1" textRotation = "auto" trackingLeft = '0' trackingRight = '0' typographicCase = "default" > 1. Idea: we are children of evolution < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = 'start' textIndent = '0' textJustify = "interWord" trackingRight = '0' > < span alignmentBaseline = "useDominantBaseline" backgroundAlpha = "1" backgroundColor = "transparent" baselineShift = '0' breakOpportunity = "auto" cffHinting = "horizontalStem" color = "#000000" digitCase = 'default' digitWidth = 'default' dominantBaseline = "auto" fontFamily = "Arial" fontLookup = "embeddedCFF" fontSize = "11" fontStyle = 'normal' "". " "fontWeight =" normal kerning "="auto"ligatureLevel = 'common' lineHeight ="120% "bar ="false"local = 'fr' renderingMode ="cff"textAlpha ="1"textRotation ="auto"trackingLeft = '0' trackingRight = '0' typographicCase ="default"> 2. Idea: Primal fear AND trust based < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = "DΘmarrer' textIndent = '0' textJustify ="interWord"trackingRight = '0' > < span alignmentBaseline ="useDominantBaseline"backgroundAlpha ="1"backgroundColor ="transparent"baselineShift = '0' breakOpportunity ="auto"cffHinting ="horizontalStem"color =" #000000 "digitCase = 'default' digitWidth = 'default' dominantBaseline ="auto"fontFamily ="Arial"fontLookup ="embeddedCFF"fontSize ="11"fontStyle =" "" "» "normal" fontWeight ="normal kerning" = "auto" ligatureLevel = 'common' lineHeight = "120%" bar = "false" local = 'fr' renderingMode = "cff" textAlpha = "1" textRotation = "auto" trackingLeft = '0' trackingRight = '0' typographicCase = "default" > 3. Idea: a reasonable attitude work < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = 'start' textIndent = '0' textJustify = "interWord" trackingRight = '0' > < span alignmentBaseline = "useDominantBaseline" backgroundAlpha = "1" backgroundColor = "transparent" baselineShift = '0' breakOpportunity = 'auto' cffHinting = "horizontalStem" color = "#000000" digitCase = 'default' digitWidth = 'default' dominantBaseline = "auto" fontFamily = "Arial" fontLookup = "embeddedCFF" fontSize = "11" fontStyle = "" ' "." "normal" fontWeight ="normal kerning" = "auto" ligatureLevel = 'common' lineHeight = "120%" bar = "false" local = 'fr' renderingMode = "cff" textAlpha = "1" textRotation = "auto" trackingLeft = '0' trackingRight = '0' typographicCase = "default" > 4. Idea: the illusion of the virtues secondary < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = "DΘmarrer' textIndent = '0' textJustify ="interWord"trackingRight = '0' > < span alignmentBaseline ="useDominantBaseline"backgroundAlpha ="1"backgroundColor ="transparent"baselineShift = '0' breakOpportunity ="auto"cffHinting ="horizontalStem"color =" #000000 "digitCase = 'default' digitWidth = 'default' dominantBaseline ="auto"fontFamily ="Arial"fontLookup ="embeddedCFF"fontSize ="11"fontStyle = 'normal' '"» "fontWeight =" normal kerning "="auto"ligatureLevel = 'common' lineHeight ="120% "bar ="false"local = 'fr' renderingMode ="cff"textAlpha ="1"textRotation ="auto"trackingLeft = '0' trackingRight = '0' typographicCase ="default"> 5. Idea: The end of self-pity < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = 'start' textIndent = '0' textJustify = "interWord" trackingRight = '0' > < span alignmentBaseline = "useDominantBaseline" backgroundAlpha = "1" backgroundColor = "transparent" = "0" baselineShift breakOpportunity = "auto" cffHinting = "horizontalStem" color = "#000000" digitCase = 'default' digitWidth = 'default' dominantBaseline = "auto" fontFamily = "Arial" fontLookup = "embeddedCFF" fontSize = "11". fontStyle = 'normal' fontWeight = 'normal' kerning = "auto" = "common" ligatureLevel lineHeight = "120%" bar = "false" local = 'fr' renderingMode = "cff" textAlpha = '1' = 'auto' trackingLeft textRotation = '0' trackingRight = '0' typographicCase = "default" > 6. Idea: Love the life < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = "DΘmarrer' textIndent = '0' textJustify ="interWord"trackingRight = '0' > < span alignmentBaseline ="useDominantBaseline"backgroundAlpha ="1"backgroundColor ="transparent"baselineShift = '0' breakOpportunity ="auto"cffHinting ="horizontalStem"color ="#000000"digitCase = 'default' digitWidth = 'default' dominantBaseline ="auto"fontFamily ="Arial"fontLookup ="embeddedCFF"fontSize ="11"fontStyle = 'normal' fontWeight =. 'normal' kerning = "auto" ligatureLevel = lineHeight 'common' = "120%" left = "false" local = 'fr' renderingMode = "cff" textAlpha = "1" textDecoration = "underline" textRotation = "auto" trackingLeft = '0' trackingRight = '0' typographicCase = "default" > read more here < p color = "#000000" direction = "ltr" fontFamily = "Arial" fontSize = "12" justificationRule = "auto" justificationStyle = 'auto' kerning = "auto" leadingModel = "auto" paragraphEndIndent = '0' paragraphSpaceAfter = '0' paragraphSpaceBefore = "0" paragraphStartIndent = "0" textAlign = "justify" textAlignLast = "DΘmarrer' textIndent = '0' textJustify ="interWord"trackingRight = '0' > < span alignmentBaseline ="useDominantBaseline"backgroundAlpha ="1"backgroundColor = 'transparent'"» «"baselineShift = '0' breakOpportunity =" Auto "cffHinting ="horizontalStem"color =" #000000 "digitCase = 'default' digitWidth = 'default' dominantBaseline ="auto"fontFamily ="Arial"fontLookup ="embeddedCFF"fontSize ="11"fontStyle = 'normal' fontWeight = 'normal' kerning = 'auto' = 'common' lineHeight ="120% "ligatureLevel crossed out ="false"local = 'fr' renderingMode ="cff"textAlpha ="1"textDecoration ="underline"textRotation = 'auto' = '0' '0' = trackingRight trackingLeft typographicCase ="default"> < / TextFlow > ';"»
private function init():void{}
ce . richText.textFlow = TextConverter.importToFlow (this.tfText, TextConverter.TEXT_LAYOUT_FORMAT);
trace ()this. richText.text)
}
[]] >
< / fx:Script >
< s:TextArea " name =" richText " id=" richText " x=" 0 " y=" 0 "width = » 412 "height = » 258 "
horizontalScrollPolicy ="
Auto "verticalScrollPolicy =" " Auto "selectable =" " true "
borderVisible ="
fake "editable =" " fake "contentBackgroundAlpha =" " 0 "paddingRight =" 15 "
renderingMode ="
SBB "fontLookup =" " embeddedCFF "cffHinting =" " horizontalStem " />
< / s:Application >
The details of the error:
: Error #1502: a script is run for longer than the default timeout of 15 seconds period.
to flashx.textLayout.compose::BaseCompose/fitLineToParcel() [C:\Vellum\branches\v1\1.1\dev\ou tput\openSource\textLayout\src\flashx\textLayout\compose\BaseCompose.as:536]
to flashx.textLayout.compose::ComposeState/composeNextLine() [C:\Vellum\branches\v1\1.1\dev\o utput\openSource\textLayout\src\flashx\textLayout\compose\ComposeState.as:312]
to flashx.textLayout.compose::BaseCompose/composeParagraphElementIntoLines() [C:\Vellum\branc hes\v1\1.1\dev\output\openSource\textLayout\src\flashx\textLayout\compose\BaseCompose.as:3 95]
at::ComposeState/composeParagraphElement() [C:\Vellum\branches\v1\1.1\dev\output\openSource\textLayout\src\flashx\textLayout\compose\ComposeState.as:272] flashx.textLayout.compose
to flashx.textLayout.compose::BaseCompose/composeBlockElement() [C:\Vellum\branches\v1\1.1\de v\output\openSource\textLayout\src\flashx\textLayout\compose\BaseCompose.as:219]
to flashx.textLayout.compose::BaseCompose/composeInternal() [C:\Vellum\branches\v1\1.1\dev\ou tput\openSource\textLayout\src\flashx\textLayout\compose\BaseCompose.as:372]
to flashx.textLayout.compose::ComposeState/composeInternal() [C:\Vellum\branches\v1\1.1\dev\o utput\openSource\textLayout\src\flashx\textLayout\compose\ComposeState.as:134]
to flashx.textLayout.compose::BaseCompose/composeTextFlow() [C:\Vellum\branches\v1\1.1\dev\ou tput\openSource\textLayout\src\flashx\textLayout\compose\BaseCompose.as:339]
to flashx.textLayout.compose::ComposeState/composeTextFlow() [C:\Vellum\branches\v1\1.1\dev\o utput\openSource\textLayout\src\flashx\textLayout\compose\ComposeState.as:102]
at flashx.textLayout.compose::StandardFlowComposer/ http://ns.Adobe.com/TextLayout/internal/2008:callTheComposer ([C:\Vellum\branches\v1\1.1\ dev\output\openSource\textLayout\src\flashx\textLayout\compose\StandardFlowComposer.as:678])
to flashx.textLayout.compose::StandardFlowComposer/internalCompose() [C:\Vellum\branches\v1\1.1\dev\output\openSource\textLayout\src\flashx\textLayout\compose\StandardFlowComposer.as: 758]
to flashx.textLayout.compose::StandardFlowComposer/compose() [C:\Vellum\branches\v1\1.1\dev\o utput\openSource\textLayout\src\flashx\textLayout\compose\StandardFlowComposer.as:821]
to flashx.textLayout.container::TextContainerManager/compose() [C:\Vellum\branches\v1\1.1\dev \output\openSource\textLayout\src\flashx\textLayout\container\TextContainerManager.as:1207]
to flashx.textLayout.container::TextContainerManager/updateContainer() [C:\Vellum\branches\v1 \1.1\dev\output\openSource\textLayout\src\flashx\textLayout\container\TextContainerManager .as:1294]
to spark.components::RichEditableText/updateDisplayList() [E:\dev\4.x\frameworks\projects\spa rk\src\spark\components\RichEditableText.as:2601]
at mx.core::UIComponent/validateDisplayList() [E:\dev\4.x\frameworks\projects\framework\src\m x\core\UIComponent.as:8709]
at mx.managers::LayoutManager/validateDisplayList() [E:\dev\4.x\frameworks\projects\framework \src\mx\managers\LayoutManager.as:663]
at mx.managers::LayoutManager/doPhasedInstantiation() [E:\dev\4.x\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:736]
at mx.managers::LayoutManager/doPhasedInstantiationCallback() [E:\dev\4.x\frameworks\projects \framework\src\mx\managers\LayoutManager.as:1072]
Thank you for your support!

This bug should be fixed in the 4.5 SDK. Please use the latest version of the SDK.

My environment is FlashBuilder 4.5 premium and its SDK 4.5 default value. Everything goes well on my machine.

Thank you

Satellite M70-159: how to set the APM mode on the HARD drive?

Hello.
I have Toshiba M70-159 and I have problem with my HARD drive. My power to drive (FUJITSU MHV2060BH) down from 2 to 5 min... I put in Toshiba Power Saver "Never."
I now read http://www.fel.fujitsu.com/support/disk/manuals/m60_product_manual.pdf and I see maybe APM I put.
How can I configure Mode APM?

1.11 advanced Power Management (APM)

The hard disk automatically switches to the mode according to energy saving the
setting the APM mode under the inactive state.
The APM mode can be selected with a number of sector register of ALL
Control FEATURES (EF).
The disk complies with the three types of modes of the APM which a command
from the host is necessary.
EN = 05 h: enable APM
SC = C0h - FEh: Mode-0 Active Idle? Idle low power
SC = 80 h - BFh: Mode-1 idle assets? Low power idle (default)
SC = 01 h - 7Fh: Mode-2 inactive assets? Low power idling? Standby
EN = 85 h: disable APM (Game Mode-0)
Active Idle: The head is in a position of extreme inner disc
Middle. (VCM Lock)
Overview of the unit
1-14-C141-E224
Low power Idle: the head is unloaded the disc.
The spindle motor.
Standby: the motor stops.
In Mode APM-1, which is the default APM mode, operational status moves until it
Finally reached "low power idle."
Table 1.7 Advanced Power Management
APM mode
Idle assets
(VCM Lock)
Idle low power
(Unloading)
Standby
(Spin-off)
Mode-0 0.2 to 1.2 s min. 15 s/o
Mode-1 0.1 to 0.2 sec 10.0 - dry 27.5 n/a
2 mode 0, 1-0, 2 s 10.0 - dry dry 27.5 10.0 - 40, 0
When was the maximum period during which the hard disk waiting for orders
exceeded:
Mode 0: Mode shifts affection Active Active Idle in 0.2 to 1.2 and low
Inactive power in 15 minutes.
Mode-1: Active status to Active Idle mode in 0.1 to 0.2 seconds and
low power idle in 10.0 - 27, 5 seconds.
Mode 2: Active status to Active Idle mode in 0.1 to 0.2 seconds and
low power idle in 10.0 - 27, 5 seconds. After 10, 0-40, 0 seconds in
Low power idle mode goes into sleep mode.
Note:
The default values for these settings are reflected in the values of WORD 91 of the
Command IDENTIFIER. In addition, APM mode is initialized with the Mode-1
(the default) to power off.
The above mentioned is time until the transition to each mode of power based on the point
that the reader becomes a State of waiting for order.

How can I set Mode APM to disable EN = 85 h: disable the APM (Set Mode-0)

Where do I put? Please help me.

Hello

You can use either the Toshiba Power Saver that controls also the APM mode or you will remove him this tool and then you will use the Windows power management.
Here, you can change the settings for the APM mode.
Unfortunately the other options to disable the APM Mode are not known to me.

-Measurement of the pulse width specifies the timeout?

I'm trying to set up a simple project of Signal Express that measure the pulse of two separate signal lines width.

My PCI6224 has two entrances of meter and then run each pulse in the entrance of a meter line, respectively.

The I set up the express project signal attached, which consists of two simultaneously runnings tasks DAQmxAcquire. Each of them is set to measure the pulse for one of the pulse width. I then connect the results for further analysis.

This configuration works very well from time to time. The problem arises when the impulses do not arrive quickly enough and the acquisition of the timeout action. Looks like that has a simple solution - just increase the time-out - but I can't find a single setting around the affects, the time-out! The time-out period is always 10 seconds, regardless of what I do.

Can anyone help?

Thank you.

Hello rothloup,

Unfortunately, there is no option to change the time-out Signal Express for a task entry counter. This has been brought to the attention of our developers.

Reading a DAQmx LabVIEW VI has a time-out node you can specify the time-out period, even in the tasks of meter. I suggest you try to implement your system in LabVIEW (if you can).

Here is a tutorial on how to make PWM in LabVIEW.

http://www.NI.com/Tutorial/2991/en/

See you soon,.

How to disable the timeout of the wizard of the instrument

I don't want the instrument Wizard to expire if there is no entry series.

The only way I know how to do it is to open the front panel of the wizard of the instrument and remove constant numeric keypad to timeout the timeout of the node of the property parameter.

But I don't really like to do jump the Assistant of the instrument, is there an easier way to do this? As I turn off a setting?

Thank you.

In the I/O assistant, you can set the time-out waiting-1 which will become really 4294967295 milliseconds (the maximum value for a U32). It would be a value of timeout of close to 50 days.

But why would you want that? I see no logical reason not to have a reasonable timeout value. A time-out is intended to protect you against trying to read a message that never comes. Suppose that a cable gets kicked out before the response to a message doesn't come back. Do you think your code freeze for still waiting for a response that never comes? Or you want to detect a time-out error and handle this gracefully.

setting the time for the splash screen

Hello

How to set the time limit (10 sec) to start using HTML5 webworks blackberry screen.

Thank you.

Vishnu.

Hello

It is not possible to specify the time that displays a loading screen.

Basically, the length of time, it is displayed, is however of time it takes to the application's resources fully charge the device.

-Chad

Having problems setting a timeout of session for wireless LANs

I'm setting up a WISN with software version 4.2.62.0.

So that the implementation of wireless local networks, I'm putting in place a session of 12 hours (43200 seconds) time-out value on the tab 'Advanced' edict WLAN.

However, when I hit 'Apply' and go back in the same edition of WLAN, the timeout value back to 0.

I tried to check "Allow AAA override" but that has not solved the problem.

Anyone know how to get around this problem or resolve?

Thank you.

Try putting in the CLI and check it took... could be a problem with the code of 4.2, since it's fairly new :)

Set the timeout 30 sec in UTL_HTTP in Oracle 11 g

Similar Questions

Maybe you are looking for