Set the value of cluster control in secondary school
Hello
Is there a way to set the value of control from one cluster to a high school?
I enclose my screw in LV8.0
Charly
If you have a reference to the VI being put into secondary (which there or it is not in the secondary, right?) you can use it to get a reference to the façade of the VI. This in turn will allow you to read an array of references to all the controls and indicators on the front of the Secondary VI. Cross this table by looking at the text property of the label: for each reference in the table until you find the one for the control of the cluster.
Now, use the specific function to more class to convert reference generic control of the pole to a cluster reference. You can use it to get an array of all the controls within the cluster. Now, go through this table by looking at the text property of the label: for each reference in the table until you find the one for control quevous want to set and you are there...
Mike...
Tags: NI Software
Similar Questions
-
Setting the value of a table of ActiveX control
When controling a VI through ActiveX, how is possible to set the value of a table control?
With digital controls, I have a problem: I just use SetControlValue and it works well:
til SetControlValue ('y', 4) for example.
However, in trying to do the same thing with a table, the control's value becomes an empty array:
til SetControlValue ("arr', [3-4-5]") for example.
What is the right way to do it?
Hi Calvin,
Have you tried passing a string and convert it to an array entry? You can also try to use a 'matrix' control, rather than a table, as they are handled a little differently.
-
Is any way to allow the user, set the value of a null datetime-local field
Dear all,
During development, I found that it is not possible for the user to set the value of a field to enter a non-empty value to null datetime-local.
Take for example, the monitoring scenario
-User set a track the date and time for a task
-L' user wants to erase track the date and time of the task.
But the controller of out-of-the-box made by webworks offers no way for the user to clear the values in the input of datetime-local.
I would like to know, is there additional information about this limitation, or actually, there is a way to do this?
Any useful information would be appreciated on this topic.
Kind regards.
Lawrence.
It is advisable to add a "Clear" next to your input control button?
The input control only allows you to select values for the value. 'Nothing' is not a valid date.
-
Nice day
I have a form with a data block and two elements in the data block. The first element is a checkbox control, while the second is an id I have set up a trigger on the ID element (after CHANGE) which must set the checkbox item if the ID has a system ID valid. The problem I have is that I can't seem to be able to set the check box. I need advice.
Data block = VARREQ
Articles:
USE_VAR_FLAG (valid values are "Y", "N")
VAR_ID (valid values are a number)
The code I've tried so far:
Start
: VARREQ. USE_VAR_FLAG: = 'Y ';
end;
This does not set the value of the checkbox.Hello
Sometimes we need to test pls create a button insert your code after change of BUTTON-WHEN-PRESSED new trigger
then display message of your box it will come back?happy u solved your problem it comes to choice of trigger is not a code problem :)
I think you can also use WHEN-VALIDATE-RECORD release...
Kind regards
Amatu Allah
Published by: Amatu Allah on May 15, 2012 15:03
-
Setting the value of selectOneChoice to run
Hello
I need set the value of selectOneChoice at run time. During the loading of the Page I am creating RichSelectOneChoice object and currencyCode.setValue ("USD");
When I check on the length it does not show 'USD' as element selected in the drop-down list where as background it sends USD for application downstream.
How to get the SelectOneChoice value show that is selected at run time in code?
Thanks in advance.Have you abandoned the currencyCode in the data control palette (in which case the selectitems will be generated index as values), if so, to set objective test the index as a default and see if it shows the correct value.
If you wan to have values rather than indexes, you can use forEach. See this [forum post | http://forums.oracle.com/forums/thread.jspa?threadID=938840] for the sample code.
Jean Lou
-
How to set the value of a variable in automator?
I'm totally new to automator I found a post that I try to reuse
to Re: copy multiple files from TextEdit in one Word file
I want to open a series of html files in a folder and convert in a TextEdit rtf file.
However, I am unable to automator find out how set the value of a variable such that it appears in this post
I looked at every command in library without a lot of fortune
Any help?
Thank you
Dan
Its in Utilities.
In Automator, use the search box:
-
Set the value of the parameter in the call sequence by programming
Is there a way to set the value of the parameters of a call sequence with a vi with the context of the sequence in the order which is called? Cases not the same subseqence with a vi in the mainsequence maybe?
In your VI, I think you should be able to set the value of Step.TS.SData.ActualArgs.paranumber.Expr to the value of the setting that you want. (This property is visible in the Variables pane, only if you have configured the Options of Station to display hidden properties). Note that the purpose of the step should refer to the sequence of your call step. Also, remember that the property represents an expression, so if you want to pass the value 33, you must enclose the value in quotes ("33").
Jeff
-
How can I change the value of a control on front panel?
On the front panel, I'm doing a complex control that consists of a Slider control and control of the digital inputs. Both controls display the same information and either may be used for entry. When changing value, I want the other control to display the same value.
How can I change the value of a control on front flap when another control changes the value? I know how to use a structure of the event to detect value has changed, but I do not know how to impose control on front panel to change its value in the block diagram.
Why do you not use a digital display on the slider, and no code is required:
EDIT: Yes, he said. ***
-
Set the value of the page elements using apex.submit
Hey,.
Does anyone have an idea how to set the value of several page elements using apex.submit?
Here is my request, she works for this element of the page, but I want to first the value of the other elements of the page (i.e. P30_SHOW_REF) as well.
select s.nr as NRR, '<input type="button" value="clickme2" onclick="document.getElementById(''BUTTONS'').style.display = ''block'';apex.submit({request:''SET'',set:{''P30_KLT_NR'':'||s.nr||'});"/>' Button from klant s
Thanks in advance!
Hi Julijan,
Here is the example:
apex.submit({ request:"DELETE", set:{"P1_DEPTNO":10, "P1_EMPNO":5433});
Concerning
J
-
Hello
I would like to know how to use PL/SQL to create dynamic action to set the value of a list of selection by another selection list.
I wish can create dynamic action to manage the two above the Room select list (: P9_ROOM) and building (: P8_BUILDING).
When you select "1074" in the bathroom, building highlights like "BRM BLD 5"
When you select 'Area of the black box' in the room, building must assign the value "7 BLD BRM"
When the room is Null, building should also be Null.
I thank you,
Alice
I forgot to mention, for the PL/SQL Code, because you are working with items in the selection list, the return values are different from the display on your LOV values, you must instead use the return values.
Thank you
Erick
-
How to set the value derived in the bean messagechoice
Hello
I have a requirement to set the value derived in messagechoice.
Need help in this
Kind regards
Kalai
Good answer:
String stmt =
"Start: 1: = xxcust_eam_oaf_extensions.get_wo_priority(:2,:3,:4); end; « ;
CallableStatement cs = txn.createCallableStatement (stmt, 1);
try {}
cs.registerOutParameter (1, Types.VARCHAR);
cs.setString (2, OrganizationId);
cs.setString(3,RequestNumber);
cs.setString (4, consequences);
CS. Execute();
Priority string = cs.getString (1);
pageContext.putDialogMessage (new OAException ("priority value:" + priority));
If (priority! = null) {}
pageContext.putDialogMessage (new OAException ("inside the loop if"));
String query = "select lookup_code from the mfg_lookups where lookup_type ="WIP_EAM_ACTIVITY_PRIORITY"' and sense =: 1 ';"
PreparedStatement stmt1 = conn.prepareStatement (query);
stmt1. SetString(1,Priority);
ResultSet resultset = stmt1.executeQuery ();
If (resultset! = null) {}
While (resultset.next ()) {}
If (resultset.getString (1)! = null) {}
String lookupcode = resultset.getString (1); here for the extraction of the column in the query
OAMessageChoiceBean xxPriority = (OAMessageChoiceBean) webBean.findChildRecursive ("Priority");
xxPriority.setValue (pageContext, lookupcode);
}
}
}
}
}
{} catch (SQLException e1)
throw new OAException (e1.getMessage (), OAException.ERROR);
}
-
dynamic action sets the value of the element, but not save to DB on submit
I'm working on a page where the value of several to show only the page elements are defined using a dynamic Action. They are set when the user selects a value in a list of selection (and is based on the value of the selection list). Dynamic action is triggered on a list selection change event and then runs the real action "set the value. The selection list displays the names of sales representative. The three fields dynamically filled are the org structure (that is, their chain management).
For the action to set the value, I use a defined Type of SQL statement:
Select VP, DIR, MGR
of SALES_ORG where SSR =: P20_SSR
In the affected elements, I have fixed Type of selection to the 'item (s)"and the value of the Item (s) for 'P20_GVP, P20_DIR, P20_MGR.
Dynamic action works fine for the display of the page (that is, when I select a sales representative in the selection list dynamic action properly updated only display value fields three). This page is a form in which the user submits information relating to the rep. When the page is sent, all fields are filled in a new record of DB with the exception of three that were populated dynamically above. These fields get the values NULL.
When the dynamic action updates the values in the three fields is - it does not set the value of session? Why these fields don't are not taken into account in the submit other ideas > process Page?
I use 5 APEX with Chrome on Mac (Yosemite).
Thanks for the note. I didn't only display the items could not be used in this way. I think I'll take a different approach with the design; given that the org structure is in another table that I can simply refer to that by rep when necessary rather than saving the information uploaded to the page of the form. The reason why I have not fill the screen only the points of loading the page is because I don't know what the values should be until the user selects a sales representative in the selection list.
I'll change the design to one of the following:
1) change the display only items of standard text field. NOTE: if I make the text read-only field that causes other problems when loading (I get the message "violation of protection Session state").
OR
2) do not include org structure in the download folder and just refer to table org Rep when necessary.
Thank you!
Steve
-
How to set the value of adjecent record
Hello
For an interactive report, I wanted to know, how set the value for one of the value column taken recording (the visible record in the report) adjecent to the same column in the current record. The reason behind this requirement is, the table contains cirtain ID which is populated based on cirtain condition. And the same ID must be set to adjecent different records. Since this is event based on human evaluation of the data, I can not run the UPDATE command in the background.
To simplify the requirement, suppose, report IR on the employee. Based on the user, click one of the dummy 'comlumn link', the value COMMISSION_PERCENT must be copied to the next record. If I know EMPLOYEE_ID value of the next record, then update SQL will do the job. But how?
Thank you
-Anand
Hi Anand,
Please check the sample application you gave, I created the same according to your requirement.
Here are the steps that I did.
1. edition your column that you use as a button.
A class has been added to this button under link attributes
class="uButton cpycomm" role="button"
URL: javascript:void (0);
2. edited Page attributes
Under run when the Page loads
$("a.cpycomm").click(function(){ var $el = $(this); var nextemp = $el.closest("tr").next().find('td[headers="C725254625175515007"]').text(); var comm = $el.closest("tr").find('td[headers="C725255480705515009"]').text(); $("#P1_EMPNO").val(nextemp); $("#P1_COMM").val(comm); if (confirm('Copy Commission to next record ?')) { apex.submit('SAVE'); } });
3. a process page to update the commision has created.
Kind regards
Jitendra
-
Get and set the value to allow selected rolling Shuffle and facing page
Hello world
I work with the page and spread,
For now, I want to value page spead shuffle and type of document.
but I just find the function to get and set the value for the Document Pages allow Shuffle using the
InterfacePtr < IPageLayoutPrefs > iPageLayoutPrefs (static_cast < IPageLayoutPrefs * > (: QueryPreferences (IID_IPAGELAYOUTPREFERENCES, iDocument)))
It has no function to set and get the value of enable selected rolling Shuffle and facing page
No one knows about it?
I thank in advance
There is no code for this example in the SDK or internet. Just understand and apply the concept.
Find the code for the shuffle spread and together following spread shuffle...
// Get active spread UIDRef GetActiveSpread() { UIDRef spreadRef = UIDRef::gNull; InterfacePtr
layoutData(Utils ()->QueryFrontLayoutData()); if(layoutData) { spreadRef = layoutData->GetSpreadRef(); } return spreadRef; } // Get spread shuffle of passed in spread bool16 GetSpreadShuffle(UIDRef& spreadRef) { InterfacePtr spread(spreadRef, UseDefaultIID()); if(!spread) return kFalse; InterfacePtr iBoolData(spread, IID_IISLANDSPREAD); if(iBoolData) { return iBoolData->GetBool(); } return kFalse; } // Set spread shuffle of passed in spread // @param bValue: kTrue = no shuffle, kFalse = allow shuffle ErrorCode SetSpreadShuffle(UIDRef spreadRef, bool16 bValue) { ErrorCode status = kFailure; InterfacePtr spreadCmd(CmdUtils::CreateCommand(kSetIslandSpreadCmdBoss)); if(!spreadCmd) return status; spreadCmd->SetItemList(UIDList(spreadRef)); InterfacePtr iBoolData(spreadCmd, UseDefaultIID()); if(iBoolData) { iBoolData->Set(bValue); } status = CmdUtils::ProcessCommand(spreadCmd); return status; } -
NPE when you set the value of list binding
Hello
JDev 11.1.2.4
I have a list named Country1 linked to an executable variable country of type String binding. I'm trying to programmatically set the value but I get a NPE.
public static BindingContainer {} getBindingContainer()
return (BindingContainer) JSFUtils.resolveExpression("#{bindings}");
}
JUCtrlListBinding Country1 = ((JUCtrlListBinding) ADFUtils.getBindingContainer () .get ("country1"));
_logger.info ('Information' + country1.values () .size ()); Returns the value 100
country1.setInputValue("*");
I get the following NPE while * is a correct value in the list:
java.lang.NullPointerException
at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.findIndexFromObject(FacesCtrlListBinding.java:390)
at oracle.adfinternal.view.faces.model.binding.FacesCtrlListBinding.setInputValue(FacesCtrlListBinding.java:455)
Thank you
I got it to work but it makes no sense:
Ok:
BindingContext lBindingContext = BindingContext.getCurrent ();
BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();
JUCtrlListBinding Country1 = ((JUCtrlListBinding) lBindingContainer.get ("country1"));
Country1.getInputValue ();
country1.setInputValue("*");
KO with NPE
BindingContext lBindingContext = BindingContext.getCurrent ();
BindingContainer lBindingContainer = lBindingContext.getCurrentBindingsEntry ();
JUCtrlListBinding Country1 = ((JUCtrlListBinding) lBindingContainer.get ("country1"));
Country1.getInputValue ();
country1.setInputValue("*");
It seems that I have to read the value before it is changed.
Maybe you are looking for
-
I tried all the tips of https://support.mozilla.org/en-US/kb/firefox-says-its-just-updated-every-time-it-starts?redirectlocale=en-US & redirectslug = Firefox + has + just + updated + tab + shows + each + time + you + start + Firefox and it had no eff
-
The download starts with Firefox Setup 6.0.2.exe, but I still struggle with "setup" programs that seem to be of reasonable size (it is estimated that 45 minutes to download), but once launched, starts a download of ten hours. This should be easily ac
-
I have an iMac running OS 10.9 (Mavericks) and a machine to print/scan/fax all-in-one HP Laserjet Professional M1212nf MFP connected by USB. I have a phone with answering machine connected system. I can send faxes of the HP and the Mac (using the pd
-
NO sound when I play the MPG on Movie Maker preview
My situation is as follows... Vista 32 bit Home Premium on Acre E380 I try to read a file MPG to DV Camocorder file via Windows Movie Player, NO sound I try to play the same file in Windows Movie Maker, NO sound I play the video on the camcorder itse
-
BlackBerry Q10 no sound through ear buds using Blackberry Radio
I have a new Q10 with the new software of today. The problem is regular FM works fine and I downloaded Blackberry App regular FM Radio still works very well, but the new application of radio does not play.