Set up a wireless network printer
I lost my wireless connection and have had to put up again. Now I have my 6600 Officejet wireless printer successfully implemented with my router and also my computer running Windows XP. To allow printing I configured a USB connection. When I run the software from the USB mode to the wireless network that it starts very well mobile file across but the bar then gets the opportunity of almost 3/4 and everything stops and after awhile, he says that he didn't. The only thing that seems a little strange to me is that, on the Page of Configuration of HP network, it shows the wireless Direct as having a different SSID this could be the problem?
Wow, excellent. Thanks for the update.
Tags: HP Printers
How to set up a wireless network with 2 iMacs?
Need more information. Writing an effective communities of Apple Support question.
I have laptop EA60-155 A60.
I have trouble to set up a wireless network between my desktop and my laptop.
My office works well online via a network of 576 Thompson router. I use a BT Voyager 1060 portable card in my laptop, but the two will not connect. Can anyone help?
as a first step, he must set up a connection between the laptop and the router. Now, the two computers are in the same network. They can see each other in Solution Explorer if they are in the same workgroup. You can change the Working Group in the Control Panel, System.
Hi there tried to hook my laptop up to wireless as ethernet cable keeps me tripping. I am complete technophobe and propably have the only laptop that gets used especially to open the door.Have tried everything I can think even threaten her with glass of water after trying to connect to the wireless network, that it is said that there is something that doesn't work not with the driver if it means something to you. I have a toshiba, if it helps.Thank youoriginal title: I hope someone can help technophobe
It is said that there is something not working only not with the driver
You probably need to install some network drivers for your wireless card.
Visit the manufacturer's Web site and select your computer model (this is usually done in the Support section). You should be able to download drivers for your model. Download the driver (s) and follow the instructions to install - every computer is different, so I can't give you exact directions. You can also try to use Windows Update to get drivers - it is located in the start menu.
Update of the hardware driver that is not working properly:
Establishment of a network domestic:
For more information network:
Start here to set up a home network in Windows 7:
What do I need to connect to Internet:
Adding a wireless computer
Set up a wireless network:
If your network is wireless, run the wizard to Set Up a network on the computer attached to the router.
1. open Set Up a network by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center click on set up a new connection or a network and then click on set up a new network.
2. the wizard will guide you in the process of adding other computers and devices to the network. For more information, see:
Manually add a wireless computer
1. sign the computer.
2 open the connect to a network by clicking the network icon in the notification area.
3. choose the network wireless from the list that appears and then click on connect.
4. type the network security key or password if you are prompted to do so, and then click OK.
-You will see a confirmation message when you are connected to the network.
5. to confirm that you have added to the computer, follow these steps:
-Open network by clicking the Start button, then Control Panel. In the search box, type network, and then, under center network and sharing, click on view network computers and devices.
I ave a labtop new, bought used in Mexico, during the CCA creation, it is a toshiba 2011, says he has a card inside, I got connected to the House through the wirelessin from home, but have not yet connect to home any ideas thanksHelloYou can follow the links that may help you solve your problem below:In the Windows wireless network connection problemsSet up a wireless network
I wana share my wid of connection and the files internet my frendz in my community, we are all distributed in a box around 300metres.we live in different houses and between our houses, there are many buildings. This is our situation and I wana set up a wireless network between the routers and antennas us.so wat kind if I need to... .plzzz help
To use a router... you must have the Internet Service in your home from any Internet service provider... If you have Sevice, then you can use any broadband router from Linksys WRT54G, WRT54GS, WRT54G2, WRT160N, WRT120N, WRT330N... to the configuration of the wireless network.
Hi all, I have a C4599 All in One Printer. I have just set up successfully with a WiFi connection to my router / modem network (infrastructure mode). There is no error message and I can print from a variety of laptops Windows (XP, Vista and 7). I loaded the HP eprint app on my Ipad 4 but it can not detect the printer. Note that the HP site says that this printer is compatible with the App ePrint.
A second and possibly related is that I recorded with the HP eprint service website but I can't get the code or e-mail address for my printer. I can't find any way to turn it on the Web Services on the printer? (The HP site says this should be under Setup > wireless to the printer, but it is not.) There are only options to turn on/off the wireless, testing the wireless and print the wireless network and printer settings (which are all OK > PASS or information).
With the update that has been done to the ePrint application, some of the old printers lost the ability to use this application to print from. The printer would not print directly from the iPad to the printer either. This is a feature called AirPrint. When you have the possibility to use AirPrint, he must place the unit on the same network as the printer, pull up a photo, press the action button on the iPad and then select print. The iPad will then give an option of the printer to print from if there is more than one printer capable of of AirPrint on the network.
The printer cannot produce a code to register and save ePrint due to the age of the printer. Printers that have the ability of ePrint are a majority of those who have been in production in 2010 and later versions. A few Photosmarts who have the ability to use ePrint AirPrint are the 7520,6520 and the 5520. To learn more about these printers, see this link here.
I was running around in circles to find an appropriate printer that can do the following
(1) Automactically detect A3 or A4, size and printing paper so scale is automatically required
(2) copy an A4 document and even print on A3 paper
(3) network connectivity - wired and wireless
(4) mobile printing from iPhone, iPad, Android devices
Please consider this printer will print for most of a mobile device, and printed documents must be printed on A3 paper most of the time as the customer which I hope to buy the printer has difficulties with small reading text.
Appreciate help, if someone can help me.
The HP Officejet 7610 has most of the features you want - see the description of the product here. It will scan up to 11.79 "x 17" and will print and copy sheets of A3 and A4 format.
Special featuresA Wi - Fi connection
Wireless network card included
My power went market last night and now my Deskjet 3050 a is no longer connected to my wireless network. How to reconnect? I don't have a usb cable to connect the computer to the printer. It's the first time that this has happened - I've had this printer for over 2 years now.
OK, I pulled down the manual and you do not have an installation wizard, sorry. You will need to use a USB cable from the printer and follow the instructions on page 32 of the User Guide to get back attached to your router.
HP Deskjet 3050 has
I got a router change and now can not conect my printer on the wireless network. What should I do?
Hi MaggieS, this support document provides suggestions for the correction of a reliable wireless connection. Try to work through them in the order of presentation and do not hesitate to post back if you are still not able to get connected http://support.hp.com/us-en/document/c02817031
All the best.
Help, please. Please can someone tell me how to configure my satellite P20 to exploit in the wireless. I've got 2pcs as an icon in the bar indicating connection 1394 tasks. Speed 400.0Mpbs
connected state. What is that.? I think I did this through the Connection Wizard, but didn't know what I was doing or how. PS. I'm not on broadband.
As Miro Wireless and IEEE 1394 (firewire) are two completely different things. If you want to learn more on this subject see please this link http://searchnetworking.techtarget.com/gDefinition/0, 294236, sid7_gci748584, 00.html. FireWire is mainly used for the transfer of data from external devices such as camcorder, external HARD disk or external devices, CD or DVD, because the data transfer speed is fast enough.
Can you please tell me exactly is it your device wireless card? You can check in the Device Manager. If so use to the first switch wireless on the left side of your laptop. If the wireless card is enabled and wireless light is on use the key combination FN + F8 to check if the card is correctly activated. After that, you must configure a wireless connection using the wireless network connection properties.
When you configure a wireless network without router, how many computers can I connet to this network? Is there a limit?
Wow, I'm sorry. I must have had a brain freeze when I read your post. * From http://www.tomshardware.com/forum/20446-43-wireless-networking-general
What is the maximum number of wireless clients that can be networked using the Ad-Hoc mode, i.e. without an access point?
The theoretical limit, which is the same as in Ethernet, is determined by the 48-bit MAC address field in each frame of wireless data. The practical limit is determined by the constraints that can be integrated to client drivers. As a general rule, Ad-Hoc networks with 16 to 32 stations should be possible.
See you soon
I tried several times to connect to my printer wireless in the House and I always feel bogged down in technical language that is foreign to me. Questions asked, like URL, addresses and others and I don't have any idea where to find this info.
I intend to try and install this printer one more time so mget the specific questions I need answers to, so bear with me please. Will be later.
While we're waiting to hear from you @7delnann7; Although I'm not sure of the question, you are experiencing or questions you have, I suggest running printing HP and Scan Doctor because this may require a very easy to use and useful. HP printing and doctor Scan is a free utility (tool) that allows to quickly resolve problems printing, scanning and connectivity, including but not limited to:
USB: Check that the USB connection from your computer to the HP product works properly.
Network: Verifies that the network connection between your computer and your network is working properly.
Device Status Test: checks the errors of the device, such as paper, paper jams, stands transport and paper issues and provides instructions to resolve the error.
Driver: checks the driver missing or corrupt files.
Device Manager: check the problems in Device Manager that could prevent printing.
Device online: check if the product has been suspended or put in offline and then sets the State back in line if necessary.
Print queue: checks and clears pending print jobs in the print queue (a newspaper for printing waiting to print).
Port Match: check the port settings for the HP product.
Device conflicts: check the conflicts with other drivers, such as the other brands of printers.
Ink issues: check the cartridges and the ink levels for issues that affect the print quality.
Print settings: check and adjust the print quality settings.
Test print: print a test page for the assessment of the print quality and provides options for cleaning and if necessary print head alignment.
Scan tests: check the scanning mechanism, drivers, and registry entries.
Click here to download and run the print and Scan Doctor > > www.hp.com/go/tools
If this does not resolve the problem, after back and let me know if there are all the symbols except the Green checkmarks and what they are next of course. The key is not always easy to find the key and the box are in the green circle.
If you see only the Green checkmarks (), the tool did not find any problem.
If you see green sides (), the utility identified a problem and fix it automatically.
If you see yellow exclamation points (), the test failed and requires monitoring of the user, but the step was ignored.
If you see a red X (), follow the onscreen instructions to fix the problem.
Thanks, I look forward to hearing back on your part. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message.
I did everything I know how to do. I am running Windows 7 and have an Epson Artisan 730
wireless printer. Of course, jeans does not come with it, you can print it using your ink & paper, well not the question.
He executed before then all of a sudden he left, now I can't seem to run.
And he also spits unsued paper, I really HELP neen. If anyonw has time to offer help I woulld greaatly appreciate it.
What exactly is the problem you are experiencing with your printer?
If you try to install a wireless printer in a network, then I suggest you to consult the following link to install the wireless printer.
Install a printer on a home network:
If you encounter any problem with the printer, you can consult the following Microsoft article and check.
Printer in Windows problems:
Hope the information is useful.
I have a HP Officejet 4620 all-in-one that I try to use with my desktop computer. The printer has been added to my home network, and I added the printer to my computer via the tab "Devices" Control Panel settings, but when I try to print, nothing happens. The printer icon appears in the bottom right of the task bar that says the printer has "0 documents pending. Strangely, another computer in the office at home, also running Windows 10, can connect and no problem printing to the printer. I tried to install/reinstall the drivers, reset my computer, reconnect with and without a cord USB, and none of this helps. Any ideas on how to solve the problem? My computer was running on Windows 7 until this month when I updated for Windows 10, so I don't know if it's part of the problem or not.
Welcome to the Forums of HP Support!
I see that you are unable to print to your printer HP Officejet 4620. I'd be happy to help you with this. Looks like the driver is damaged.
The software and the driver could have gotten corrupt, so we will need to remove it and reinstall.
First of all. Please follow the steps in this guide:
- HP printers - printer problems after upgrade to Windows 10
- Run Windows updates, keep your computer current with updates for Windows.
If the problem persists, follow these steps to see if you can solve the problem.
Let's start by cleaning up your computer.
- Cleaning disc in Windows 10.
- Perform the clean boot in Windows 10 / 8 / 7.
- Use the System File Checker tool to repair the missing or damaged system files. It's always a good idea to back up your data before proceeding.
- File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.
- I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!
Maybe you are looking for
If you use Firefox, my Facebook profile photos are no longer visible, but I can see them on Internet Explorer. How can I change the settings in order to unlock my photos?
Hello- I ran the Windows 7 Upgrade Advisor on a computer in Windows Vista Home Professional 32 - bit and the results noted the following: (check mark) Upgrade Options available: you can switch to 32-bit Windows 7 Home Premium or Ultimate. Question:
I'm trying to connect my laptop to my old TV which has only rca records. Laptop has a vga out alone. So, after a little obstructionisme at frys-(ne pas vouloir payer 60 pour ce truc de coffret, ils avaient--j'ai commandé un câble adaptateur RCA/S-vid
Could someone tell me please how to get this icon appears in Control Panel? I had it here, but now he isn't. I started the computer and this last 20 seconds, the BT icon in the quick start row of icons in the lower right dispeared. I have the icon fo
With my old curve, I was able to move the speed dial of voice mail to another location. On the "BOLD", it seems that it is locked the letter w. When I highlight the speed for voicemail dial it does not give the ability to move, edit, or delete. Any s