Set up freshly - WIFI system does not

Hey there,

After some virus problems, I set my system, formatting the hard drive and reinstall Windows. I also downloaded the update of the Lenovo system, all installed updates and downloaded the center of Solution ThinkVantage. Now the PC is working again BUT the WiFi adapter does not work. It seems to be non-existent, if I press F9 it says I'm supposed to press the switch of hardware. I have a ThinkPad Edge 15, there no such a change at all.

In the hardware Manager I find a network driver device, so I guess that's it. However, no driver seems to work. I downloaded the dirver (s) of WiFi on the Lenovo site and install, nothing happens. What can I do?

Here is my card:

-Thinkpad Edge 15

-Windows 7 Home Premium (OEM)

-the driver I installed that did not work: Intel Wireless LAN (bg, abg, abgn) for Windows 7 (32 bit, 64 bit), XP - ThinkPad

Thank you in advance for help you! I am fairly certain that the works of material, before I set uo the WiFi system was not at all a problem.

Best wishes

Tobias


Tags: ThinkPad Notebooks

Similar Questions

  • Satellite L650-14F - system does not have WiFi

    Hi all

    I've seen a few topics about this, but I still can't solve my problems. I have brand new Toshiba Satellite L650 14th but I can't seem to use my WiFi.

    The problem is that the system does not recognize, even in the Device Manager there is nothing. I downloaded the driver from the toshiba site, but when I run it nothing happens. I also tried the BIOS update and install the package of added value, but still nothing. Also, someone mentioned editing tool of Network Device ID registry settings, I downloaded that too, but when I run also nothing happens. I did a lot of research and could not find the solution or the driver work.
    Furthermore, I have windows 7 64 bit.

    Any ideas? I really need wifi, my started classes two weeks ago and no internet at home, I can't do anything useful. Thank you.

    Hey Buddy,

    If the system doesn't recognize the WLAN card, it seems to be disabled.

    You should check the key combination FN + F8 which can enable/disable the WLAN connection.
    In addition on some laptops you can toggle the wireless LAN in the BIOS.

    Check this box!

  • My wifi network does not connect automatically

    Hi all

    im a user frustrated.

    My wifi network does not connect automatically, keeps asking me the password (even if I continue to score for remembering network). The password does not change.

    I also deleted the list of networks do not forget and do it again. Any help?

    Much appreciated guys.

    create another user account and start to this account, set up a wi - fi connection and restart to this account.

    Is the same behavior?

  • my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.

    my system does not start upwards - don't stop progression blue bar that goes round and round.  I can boot into safe mode and safe mode with networking mode.

    Hello

    As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.

    http://support.Microsoft.com/kb/310353

    If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.

    Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

    Silverlight installation problems

    I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

    Hello

    It's the operating system Vista Installation Forum.

    Microsoft has set up Forums to specifically to questions of Silverlight.

    They should be able to help you there.

    http://forums.Silverlight.NET/

    See you soon.

  • T610 with Windows Embedded 7 - the system does not license for the operating system image

    Hello community,

    I bought a refurbished computer ThinClient T610 that is running a Windows 7 Embedded English. The label on the package says, that the computer ThinClient is allowed with W7E. When I now run Easy Tools installed on the computer ThinClient hp to create a USB Image with the German language, everything works fine: the image is downloaded from the web and put on the stick.

    But after you start the stick, the installation program tells me: "the system does not license for the operating system image. What I am doing wrong? The BIOS is already the latest.

    Or y at - it another way to transform the operating system in German? There should be an option to download additional languages, but this particual window has no other options. And I have not found any manual way to download other languages.

    Concerning

    Michael

    Sometimes it can be so easy... ;-)

    So here's my solution:

    1. go on the Web for hp Support site

    2. go in the software and driver download

    3. set the language of driver on the language of your choice (in fact: it was the main problem)

    4. download an operating system image

    5. run the configuration tool and copy the image of an operating system on a flash drive

    6. restart the workstation and install the os

    7. take advantage of your computer ThinClient in the language of your choice

    I don't know, why the hp Easy Tools downloaded the image of evil, but with this solution, that I find myself at the same point, as if they did.

  • WiFi password has changed now my WiFi Repeater does not connect

    to change my WiFi password now my WiFi Repeater does not connect, anyone got an answer for me.

    to change my WiFi password now my WiFi Repeater does not connect, anyone got an answer for me.

    Connect to your WiFi Repeater and set the password to match the password for the router.

  • \\HOME-server is not accessible. A device attached to the system does not work.

    I use Windows 7 Professional. My network server is WHS V1.

    I have a shortcut on the desktop to \\HOME-SERVER on my W7 machine.
    All of a sudden it has stopped working.
    I get the message
    \\HOME-server is not accessible. You might not...
    A device attached to the system does not work.

    I found that the command line net view \\HOME-SEVER gives (and by typing this in an address bar of the Explorer does not work)
    31 system error has occurred.
    A device attached to the system does not work.

    And this net view \\HOME-SERVER\Music gives (but in typing this in a browser address bar works!)
    53 system error has occurred.
    The network path was not found.
    However, net view 192.168.1.99 (my server address) correctly list the share on the server names (and entering \\192.168.1.99 in Explorer address bar works).
    I did a system restore until the problem occurred first to rule out any changes to the system.
    The problem occurred again.
    This means that my Sync Center shows none of my synchronization partnerships.
    Can anyone suggest the setting or service that must be corrected to solve system error 31 problem?
    TIA
    Hello
     
    The question you have posted is related to Windows home server and would be better suited in the Windows Home Server Forum.
    Please visit the below mentioned link to find a community that will provide the support that you have requested.
    http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/
     
     
    Thank you
  • inst-08072 operating system does not ipv4 support

    The installation of obiee 11 g, I get error "inst-08072 operating system does not support the ipv4". I changed the hosts file and set a loopback adapter.

    But it still doesn't work. Do you have any supposal for the problem?

    etc/hosts, file;

    resolution of name localhost # is handled within DNS itself.

    : 1 localhost

    127.0.0.1 localhost

    192.168.2.103 server1 localhost

    192.168.2.20 localhost

    Server is 2008R2

  • iPhone6 the wifi button does not illuminate.  I want to download the new update.  I restarted the phone, my router is active.

    iPhone 6 with iOS9.3.4.

    WiFi button does not illuminate.  I rebooted the phone.  How can I make this button of the device?

    You can always update your firmware with iTunes. But it seems you might have a larger, likely hardware problem with your phone.

    Try to restore the firmware with iTunes. If this does not help, make an appointment with a genius at the Apple Store.

  • My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

    My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

    When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

  • 128 GB Canvio AeroMobil Wireless wifi SSD does not

    128 GB Canvio AeroMobile Wireless wifi SSD does not
    am facing problem with this device where I can't find it on my phone or any other wifi device (nothing is displayed on the wifi and cannot connect to the device, direct mode is OK).

    Please help

    Dr. Hamid mohamed

    Any help please?

  • Error: The system does not license for the OS image. The system cannot find the path specified

    Hello

    I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

    However, when the customer starts using this image of the USB, I get error below.

    "Error: the system does not license for the OS image! The system does not have the specified path.

    What solutions do you recommend.

    Thanks in advance

    Solution:

    I tried to install it on a Linux Thin client... Is there had this error.

  • Account Internet preferences system does not recognize the password for my AOL account... and so mail does not read the email in my AOL account

    Account preferences Internet system does not recognize the password for my AOL (Internet) account... and so Mail does not read the email in my AOL account

    Mail asking me to "Enter your password for [my AOL account] in Internet accounts."

    When I enter my password Internet accounts says it is "Impossible to verify the account name or password."

    iMac (24 inch, early 2009)

    Processor clocked at 2.66 GHz Intel Core 2 Duo

    Memory 8 GB 1067 MHz DDR3

    OS X 10.11.1 (B 15, 42) El Capitan

    Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.

    The problems of Keychain - see post of khati

  • I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

    Original title: undetected sd eject not

    I have a HP Pavilion notebook. My system does not detect my sd card and I can't eject. Help?

    From my understanding, most laptops allow you to simply remove the SD card back.  Others have a simple spring mechanism that requires you to press the memory card slightly until you hear a "click", similar to a click on a retractable pen, which must eject the card.

Maybe you are looking for

  • Devices do not appear in the finder sidebar

    I've been struggling with this for a while. Readers and devices appear on my desktop but not on the bar side, extremely irritating. I tried a few suggestions such as the removal of the finder.plists and sidebar.plists, but it did not work. OS X Yosem

  • Is it possible to transform a .exe in a .vi again?

    I'm responsible for trying to make a .exe file (published on LabVIEW) selfpopulate an Excel file with the data, he gets from the trial. To do this, I would need to take a look at the block diagram to see what happens in the devil; However, it's an .e

  • Scanner not scan all the surface of sheet

    Hello! I tried today to scan a page using my HP Deskjet 3525, but the A4 is not entirely digitized. It is a portion of about 2-3 cm, which is not discussed in the bottom side of the page. Is this a common problem with HP scanners or a setting that I

  • BlackBerry Smartphones Alltel MMS Clarifications

    Well, I'm really frustrated here, you guys.  Not only do I have an Alltel Pearl, but I'm also an Indirect agent and I can't seem to get a straight answer from anyone, and I don't know exactly where to go to find the correct information. My problem is

  • Error of HP mini 110

    I tried to access my laptop and its gives me an error code cnu941c8w3 and requesting a password. Help, please!