set up the question and request

Similar Questions

• How long does take to set up the date and time

  How long does take to set up the date and time

  Less than a minute.

  Settings > general > time zone > set automatically

  If this does not work, try the help in this support article > If your Apple TV will stop to display date and time on startup - Apple Support

• If you ask the question and then choose a solution, the thread will be closed or still can you ask more details?

  If you ask the question and then choose a solution, the thread will be closed or still can you ask more details?
  (sometimes, someone answers my question, and I want to mark it as the solution and am not yet quite ready for the thread be closed...)

  If you still experience this issue, you can return to this thread.
  But, you must clear the flag solved .

• Set up the date and time on a HP Officejet Pro 8600 more

  How do you set up the date and time on an Officejet Pro 8600 more?

  I'm going to fax setting, and then there is a dispute of options:

  Resolutions

  Lighter or darker

  Send the original documents by fax

  Set as new default values

  Fax set up but nothing on the date and time.

  Please e-mail me step by step instructions

  Note: The user manual has no instructions for this date and time to set up

  Thank you

  Go to the printer settings. Go to your preferences. There is an option DATE and HOUR.

• I posted a question can not find the question and or response. Help, please

  I posted a question can not find the question and or response. Help, please

  AFAIK, you can't share a catalog like this.

  The only recommended method is to store your images and catalogue on an external drive, you can alternatively plug in both computers.

  With today the external USB drives, the speed is still correct, and many users are satisfied with this solution.

• After a quiz can show you the questions and answers of the user to review of test

  After taking a quiz, is there a way to show the questions and answers of the user to review of passing the test.

  And those who failed the quiz would go to the first slide again to retake the test.

  Thank you

  Add an interactive object received, such as a button or slide 1 clickbox. Then the review will begin from there because Captivate counts of any object marked as belonging to the scope of Quiz.

• Set the Questions and answers by Admin

  Hello

  I am recovering user final Q and r for instance 11 GR 2 and using the setUserChallengeValues API to set the Q and r using the xelsysadm account. But I am getting below error. Someone tried this API in the PS3 and it worked?

  Exception in thread "main" oracle.iam.platform.kernel.EventFailedException: error occurred during execution Id 1 name SetChallengeValuesValidationHandler

  at oracle.iam.platform.kernel.impl.OIMEvent.execute(OIMEvent.java:174)

  at oracle.iam.platform.kernel.impl.ProcessImpl.executeStage(ProcessImpl.java:223)

  at oracle.iam.platform.kernel.impl.OIMProcess.doStageExecution(OIMProcess.java:38)

  at oracle.iam.platform.kernel.impl.ProcessImpl.execute(ProcessImpl.java:182)

  at oracle.iam.platform.kernel.impl.MonitoredOIMProcess.execute(MonitoredOIMProcess.java:33)

  at oracle.iam.platform.kernel.impl.Utils.manageSyncProcessing(Utils.java:73)

  at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.doProcessing(OrchestrationEngineImpl.java:357)

  at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:349)

  at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:330)

  at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:325)

  at oracle.iam.identity.usermgmt.impl.UserManagerImpl.setUserChallengeValues(UserManagerImpl.java:5515)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

  at oracle.iam.platform.utils.DMSMethodInterceptor.invoke(DMSMethodInterceptor.java:35)

  at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)

  to com.sun.proxy. $Proxy468.setUserChallengeValues (unknown Source)

  at oracle.iam.identity.usermgmt.api.UserManagerEJB.setUserChallengeValuesx (unknown Source)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:606)

  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)

  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)

  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at com.oracle.pitchfork.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:34)

  at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)

  at com.oracle.pitchfork.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:42)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)

  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)

  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)

  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)

  to com.sun.proxy. $Proxy467.setUserChallengeValuesx (unknown Source)

  at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl.__WL_invoke (unknown Source)

  at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)

  at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl.setUserChallengeValuesx (unknown Source)

  at oracle.iam.identity.usermgmt.api.UserManager_nimav7_UserManagerRemoteImpl_WLSkel.invoke (unknown Source)

  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)

  at weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230)

  to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:522)

  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)

  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)

  at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)

  at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)

  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)

  at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

  Caused by: java.lang.IllegalArgumentException: input buffer Null

  at javax.crypto.Cipher.doFinal(Cipher.java:2127)

  at com.thortech.xl.crypto.tcDefaultDBEncryptionImpl.decrypt(tcDefaultDBEncryptionImpl.java:222)

  at com.thortech.xl.crypto.tcCryptoUtil.decrypt(tcCryptoUtil.java:122)

  at com.thortech.xl.crypto.tcCryptoUtil.decrypt(tcCryptoUtil.java:200)

  at oracle.iam.platform.utils.crypto.CryptoUtil.decrypt(CryptoUtil.java:94)

  at oracle.iam.selfservice.uself.uselfmgmt.impl.UnauthenticatedSelfServiceHelper.validateChallengeParams(UnauthenticatedSelfServiceHelper.java:522)

  at oracle.iam.selfservice.self.selfmgmt.impl.handlers.setchallenge.SetChallengeValuesValidationHandler.validate(SetChallengeValuesValidationHandler.java:220)

  at oracle.iam.selfservice.self.selfmgmt.impl.handlers.setchallenge.SetChallengeValuesValidationHandler.validate(SetChallengeValuesValidationHandler.java:128)

  at oracle.iam.platform.kernel.impl.OIMEvent.executeHandlers(OIMEvent.java:204)

  at oracle.iam.platform.kernel.impl.MonitoredOIMEvent.invokeExecuteHandler(MonitoredOIMEvent.java:99)

  at oracle.iam.platform.kernel.impl.MonitoredOIMEvent.executeHandlers(MonitoredOIMEvent.java:69)

  at oracle.iam.platform.kernel.impl.OIMEvent.execute(OIMEvent.java:157)

  ... more than 56

  Oracle provided a temporary fix on top of BP4 and solved the problem.

• In the face of the question and try to set the affinity through VCO workflow rule

  In the face of the question then to attempt to set the affinity through VCO workflow rule I'm trying to write workflow VCO to set up the level of affinity of cluster, but it throws the error message cannot convert ClusterComputeResource 'mycluster' to com.vmware.vim.vi4.ClusterConfigSpec (Workflow: create vm-virtual machine affinity rule / Scriptable task (item1) #19) my script to workflow is var rule = new VcClusterAntiAffinityRuleSpec(); Rule.Key = - 30; Rule.enabled = true; Rule.Name = ruleName; rule.userCreated = true; Rule.VM = MV; var clusterSpecRules = new Array(); var clusterSpecRule = new VcClusterRuleSpec(); clusterSpecRule.operation = VcArrayUpdateOperation.add; clusterSpecRule.info = rule; clusterSpecRules.push (clusterSpecRule); var clusterSpec = new VcClusterConfigSpec(); clusterSpec.rulesSpec = clusterSpecRules; var m = computeCluster.vimHost //spec = task = computeCluster.reconfigureCluster_Task (computeCluster, spec, true); Note: In the above code, what are the entry parameter computeCluster entered type parameter VC:clusterComputeResource ruleName is a parameter of type String - APR

  Here is the code I use, give it a shot.

  var affinitySpec = new VcClusterAffinityRuleSpec();
  affinitySpec.enabled = true;
  affinitySpec.name = att_ruleName;
  affinitySpec.userCreated = true;
  affinitySpec.vm = att_vmArray;

  var clusterRuleSpec = new Array (new VcClusterRuleSpec());
  clusterRuleSpec [0] = new VcClusterRuleSpec()
  .operation clusterRuleSpec [0] = VcArrayUpdateOperation.add;
  clusterRuleSpec [0] .info = affinitySpec;

  var clusterConfigSpec = new VcClusterConfigSpecEx();
  clusterConfigSpec.rulesSpec = clusterRuleSpec;

  att_task = att_clusterComputeResource.reconfigureComputeResource_Task (clusterConfigSpec, true);

• Automatically set to the Date and time does not

  Date and time settings on my iPad Air set them automatically does not work? When I turn it out it will allow me to choose a city (Knoxville).

  When I turn it on with (location settings) it just turns and turns?

  Any ideas?

  Hello and welcome to Apple Support communities,

  This problem may be caused by a number of things, most often the cause is the device not being able to contact the time server. Here are the instructions from Apple supported for this problem, as well as a link to the appropriate article.

  Follow these steps, after each step:

  1. Make sure you have the latest version of iOS.
  2. Automatically turn on set in settings > general > Date & time. This will automatically put your date and time based on your time zone.
  3. Make sure that your time zone is set correctly. Tap Settings > general > Date & time > time zone.

  If you still have any questions affecting your date, time, or time zone, you can automatically disable in the settings > general > Date & time and manually set the time and time zone. Or contact your carrier.

  The option to enable the value automatically may not be available in all countries or all shells.

  If the time on your iOS device does not go after a sync with your computer, the computer may be time wrong. Check the time on your computer in system preferences > Date & time. You can select "Set date and time automatically."

  Support the Article HT203483

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  Of course, if the time of your carrier server cannot connect the other option is to manually set the date and time until the carrier server are again available.

  Hope you helps out.

  Kind regards

  Peter.

• How to set up the schema and users?

  Hello

  I'm looking for the best option for the implementation of the user and the schema in my used Oracle instance only for reports. Version using Ora11g.

  Background-

  Oracle Ora-Ainstance, is the live OLTP system.

  Oracle Ora-B instance will be the new system of reporting , I am building this new system as a reporting instance. My question is how to set up users and safety for installation below?

  Planned - approach

  Instance Ora - has, some subsets of data is moved to instance Ora-Bnight batch. Using the dblink, I'll be the data.

  Required users on Ora-B.

  1) ETLUser. -Will extract the data instance Ora-A and load B Orapending.  (User charges/written in the tables only)

  2) ReportViewer - read only access on the tables in the instance of Ora-B, for the generation of reports. (User reads only the data in the tables)

  You want all report data in a new scheme called 'Report', in the basis of the declaration.

  So, how I setup user and schema?

  Thank you

  Krishna

  Unless you are using versions of the previous decade and material, I do not recommend a separate database.  Material and modern versions run mixed workloads much better that the older systems were, so the need for a statement of the separate databases is dwindling.  The current trend in the industry is to CONSOLIDATE, less material treatment and bodies less.

  This has the additional advantage that your refreshes need not go on the network - you get faster performance of refreshment.  They share a buffer cache, so you can get the benefits of data already in memory.  If you are concerned about the damning reports of the treatment, the resource manager may set limits as needed.

  Your planned approach to ETLUSER and REPORTVIEWER is solid - good separation of responsibilities.  I would just create these ORA - a, the size of the SGA and CANCEL accordingly and allocate storage, assuming that the hardware supports the need for capacity.

  Users and schemas are almost synonymous concepts in Oracle.  They are separated in other platforms to database (such as SQL Server).  In Oracle, when you create a user, you have created a pattern.

• How can I see all my photos published in version sets in the organizer and...

  I have 2 questions:

  1. in items 14, I edited some photos... I realized, then, that they do not have version sets in the Organizer... I went to 'VIEW' and checked 'DÉTAILS' that put some of them into version sets... However, it does not have all my photos that have been previously published in sets?... How to make the pictures all modified put in 'GAMES' in the menu Organizer. ??

  2. If I use the majic selection tool when you change a photo I can't do the "mobile dotted disappear after I'm done with the editing?... how to get out of the moving dotted line after that I use to select something on a photo?...»

  Thank you!..

  johnb3001325 wrote:

  I have 2 questions:

  1. in items 14, I edited some photos... I realized, then, that they do not have version sets in the Organizer... I went to 'VIEW' and checked 'DÉTAILS' that put some of them into version sets... However, it does not have all my photos that have been previously published in sets?... How to make the pictures all modified put in 'GAMES' in the menu Organizer. ??

  First, in PSE14, the default value in the navigation area is displayed in mode 'adaptive grid. The navigation area is filled with images without text. You can switch to view "detailed" with the shortcut Ctrl + D. Allows you to see small icons for version sets, fireplaces, and albums. This mode also allows you to collapse or fold out versions or the batteries.

  The second thing to keep in mind is that in the Organizer, the only way to create games 'version' to select this option when you have recorded a version. If you save a Variant without this option, it is too late for the set of the version. The solution is to 'stack' of the original version and edited together.

  2. If I use the majic selection tool when you change a photo I can't do the "mobile dotted disappear after I'm done with the editing?... how to get out of the moving dotted line after that I use to select something on a photo?...»

  Thank you!..

  Try the Ctrl + D shortcut (even shortened, but in the editor instead of the Organizer...)

• How to set up the osb and soa in the only area

  Hi all
  hope all are well.
  
  Sorry if this question is already posted.
  
  I installed wls 10.3.6 and osb 11.1.1.6 & SOA 11.1.1.6 and cofiguration of field as successful.
  in the Setup area, I chose the osb and soa.
  
  all (wls, osb, soa) servers are increasing, but soa_infra is declining. I can't see soa folder in Ms.
  
  where is the problem please give the solution for this...
  
  Thanks in advance.
  
  Thank you
  Mohan

  Set the env variable and try again...

  RCU_JDBC_TRIM_BLOCKS = TRUE

  https://forums.Oracle.com/forums/thread.jspa?MessageID=10461245

• Profile of Newbie Xcode provision of the question and problem recording peripheral Dev Member Center

  Help!  I am a user of Xcode newbie. Just signed up for a developer account (free version added to my existing Apple ID).   I followed a tutorial to make a few changes to the Apple TV 4. In the tutorials that seem very useful do not have additional info for potential problems as those I seem to face at every turn. As far as google can be useful, it can also be a time suck empty soul.  I have a life to live then all help to speed up the answers to these questions would be greatly appreciated.

  -Launch Xcode → click on create a new project in Xcode → select Application under tvOS → Application unique view, and then click Next. Fact

  - In the product name field, enter a unique name such as KodiAppleTVforYourNameHere (done, but I have a problem I can not find the answer to...), and then click Next → create

  The 'organization' identifier is empty and I do not know what to enter and the tutorial says nothing...

  

  - In the drop-down box team, select your personal team and click the question difficulty to solve problems of commissioning. You will ensure that you are connected to Xcode with a free Apple Developer account. You can learn how to do it using this tutorial.

  I get a "no provisioning profiles found.

  When you click on "solving the problem", I get a pop up saying "no device - create a profile doesn't require" fitted with a registered in space subscribers.

  

  Then I went to the Member Center and can not find the place where to save a device... nor can I find detailed (for a novice like me) instructions on how to do it.  I tried to follow these instructions, but had problems as shown below.

  1. go to Developer.apple.com...

  2. go in the "Member Center". (This is not an option that I see...)

  

  3. go in "Certificates, identifiers & profiles." (Went straight to this...)

  4 Select "Devices" on the left navigation. (nowhere to be found... and am stuck here...)

  

  .... 5. click on the sign "+" to add a device.

  .... 6. enter a name for the device and the UDID.

  .... 7. at the bottom of the page, select continue when you are finished.

  .... 8. at the bottom of the page, choose "Save" to save the new device. Repeat these steps to add up to 100 devices on a regular account.

  These steps seem easy enough, but I continue to find myself in a position that some things I should do just are not there... like the devices section not found in the center of development Member?

  Help or direction would be greatly appreciated.  Thank you!

  Have you ever this resolved? I'm having the same problem.

• HP G70-111EM - Windows Vista 32-bit (Trying to set at the factory and keep getting error 1002)

  Dear HP support and users,

  Model: HP G70-111EM

  I've had this laptop since December 26, 2008.  Last week something was wrong on the laptop, I think managed to install the Vista program 2011 Anti Spyware of viruses on the laptop by mistake and I was not able to remove it with anti-spyware or anti-malware.  So decided to return the computer as long as factory setting by using the HP RESTORE DVD that I created in the past of the laptop.

  Then inserted the DVD and the beginning of the process until I got error 1002.  Now I can't do anything.  The hard drive seems to have been formatted so all the information was deleted, but I start the process of reinstalling VISTA.

  I am really lost do - what I need to do to solve this problem.  I have a laptop £450.00, which has an operating system that is hidden in a partition, but how can I reinstall it when the DVD of RESTORATION HP continues giving error 1002.

  

  Thank you all for your support but no luck.  I decided to buy windows 7 32 bit and install on the laptop.  I had some problem with wifi work only not with Windows 7 32 bit.  But guys on the forum helped me with that.

  So no more Windows Vista for me.

  Thanks to all and no thank you HP, as it cost me £150 for the copy of Windows 7.

• How to set up the images and captions after the import of Word 2007

  I have three general issues (ID CS4):

  • I haveMagi are placed inside the text block. How could I place them in any other place easily? If I try with the holding of the left button of the mouse, which is not possible. I have to cut it and paste it again. What is this possible.
  • How to create captions for the images and tables? I get Word of text style with a description. Maybe I need to number the pictures and tables. The common question is: is it necessary to number of images and tables in the SW user manual? I've seen a lot of documentations and there were not counted. There are common rules, when it is necessary to dial it and when not? If yes how can I do such a legend in InDesign? I tried it and I am so far, I can do it in a separate text frame for counter with text. It is the only way?
  • Import of untied the size table and the table is placed off the page. I didn't understand why ID has not regained the same size in Word 2007

  Please see my file:
  http://www.FlashMedia.cz/temp/import_word_2007.indd

  I answered this question, and we had a lively discussion. Yes, you

  create a separate text for captions. You can use automatic

  numbers, or type numbers in itself. If you do not understand the

  words in the discussion, or if you need more "hand holding" Guide

  through, I suggest that you look for some tutorials online.

  -