set wake-up mode for office vista so vista laptop can print

Similar Questions

• How to install Virtual PC Windows XP Mode for Windows Vista Home Premium?

  How to install Virtual PC Windows XP Mode for Windows Vista Home Premium?

  Hi Valentina77

  The Windows Virtual PC and XP Mode is available for systems running Windows 7 Professional or ultimate edition. It cannot be installed on Windows Vista.

  Install and use Windows XP Mode in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/install-and-use-Windows-XP-mode-in-Windows-7

  Concerning

• Where can I get a codec for Windows Vista that can play mp4 files?

  Using Windows Vista, I can't play a file video mp4 using Nero Showtime and some other video editing software. These programs show mp4 files using another computer with Windows 7.  Where can I get a codec for Windows Vista that can play mp4 files?  I don't want to install a codec pack that might ruin other programs and cause more problems than it solves. I need a codec mp4 approved by Microsoft that allows all my programs work on the Vista operating system

  Hello

  I suggest you to see link and check if it helps.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• I've lost my windows mail for contacts vista how can I get it back

  I've lost my windows mail for contacts vista how can I get it back

  Hi ssragh,

  1. what you trying to accomplish?

  2. you are unable to find the Windows Mail on the computer?

  3 when was the last time it was working fine?

  4. did you of recent changes on the computer?

  Your question does contain all the required information necessary for us to help you. Please provide more relevant information to continue troubleshooting as a result.

• monitor stays on sleep mode for windows vista

  Windows vista-processor is turned on but monitor does not wake up from sleep mode-continues to say goes into sleep mode.  by pressing the icon Moon, esc or space bar does not work.  help, please.

  Hello

  1 I want to erase the General corruption and repair/replace damaged/missing system files:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------

  Check the settings (BIOS/CMOS) that you can start and ensure that this suite of lan, Wake on modem and
  similar are not enabled.

  Shoot sleep problems - hibernation
  http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

  How to solve a problem of Mode for Vista and find a Solution
  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

  How to restore the default power in Vista (and then go back and change as you wish)
  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
  http://support.Microsoft.com/kb/950686

  Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
  and other devices. (Double click on the device and the power management tab)

  All the default power plans and then set them as you wish.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Cannot set in AHCI mode for disc SSD NB300

  Hello

  I have a Toshiba NB300 netbook, running Windows 8 Pro 32 bit, very happy with it!
  I have a Corsair 3 112 GB Force SSD drive is installed, and everything seems to work fine!

  Read on the SSDS, I see that a better performance for executing the SSD in AHCI mode.
  So I went to menu configuration of startup and changed compatibility in AHCI mode.
  I actually tried a few times, always with the same result, failure!

  When the system is trying to start I get a message saying that there was a problem and that
  the system is trying to gather information.

  The only solution is to go back in the program installation and handed to the compatibility mode.

  The BIOS is up to date, and I just don't see any way to solve the problem.
  I really want to get best performance with this net book as possible.
  I have a screenshot of the details of Speccy SSD drive, but I don't see a way of fixing?

  If anyone can advise me on how to get mounted AHCI mode and go that I would be really grateful!

  Thank you

  Chris

  Unfortunately on this forum we don t have reports on the use of the DSS on NBs I have NB520 and I would use the SSD for, but so far I didn't find the right.

  As far as I know by default BIOS is set to AHCI mode. What operating system you have installed? The original that you got with your laptop or your own version? Have you installed the s Intel Storage Manager of the Toshiba download page?

• set the optimizer mode for mapping

  How can I set the the optimizer mode (for example, "all_rows") explicitly for a mapping?
  
  ~ Prabha

  Hello

  in the design center, select "configure" in the context menu of a mapping. Under operators table, select a table, and then set the indicator of extraction.

  Kind regards
  Carsten.

• Forgotten password for Windows Vista laptop

  Original title: http://answers.micr.microsoft.com/en-us/windows/forum/windows_vistaosoft.com/en-us/windows/forum/windows_vista-security/forgot-my-pass-word/77ce19aa-6b47-4be6-8759-b7c095d1571f

  I forgot my password for Windows vista on a lap top acer extensa4420 5963

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  The advice of Microsoft in your situation is to reinstall the operating system.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  See you soon.

• Is VISTA for different VISTA laptop to desktop PC

  I want to replace my faulty hard drive in HP Pavillion laptop dv6710ea mky. I found various forums members seeking help because THEY ARE STUCK with the different error messages or machine locked.

  I hope to install Vista first, then run the recovery disc. Each able to install in laptop vista or are they different for desktop PC and computer laptops.

  Thanks for any help

  Daran

  Vista is the same, depending on the version. Another disk of Vista will not work with the windows key provided with your HP laptop, the key is specific to the game of HP recovery disks.

  I'm not entirely sure what you mean by "Vista installation, and then run the recovery disc.

  Your HP are supplied with recovery disks, or a hidden restore partition, which should have access to make the value recovery disk.

• Computer Vista laptop can't find printer home network connected to my computer (XP) on the network

  Original title: network printing

  my laptop (Vista) can't find my printer home network connected to my computer (XP) on the network. any advice?

  Hi Ihawktoo,

  1. don't you update the printer drivers for Windows Vista?

  2. were you able to print on Vista before with no problems?

  Share a printer requires a few steps.

  Make sure you have shared the printer that is installed on the Windows XP computer.

  Open file and printer sharing and share the printer.

  You can check the following items and check if it helps to solve the problem.

  Share a printer

  Troubleshoot file and printer sharing

  Network printer problems

  Hope this information is useful.

• Cannot create a second set of recovery DVD for Office Pavilion p6-2065uk

  I bought a new computer from office three weeks ago and created a recovery of three DVD set. Unfortunately I just realized they are DVD + RW and that type of shouldn't have been used and are not supported.

  My computer won't let me create another set of recovery DVD. Is that what I can do about it.

  Thanks for the reply DP - K. DVD pack have been very confused because they are marked with the DVD + R, but on the other side, there is a small symbol RW. It would seem that they are not rewritable because files are certainly on the DVD and following the instructions through the hotline telephone Windows7 started to load them so everything looks very good. Thanks again.

• Is set in cluster mode for a PV220s "sharing"?

  Hey all,.

  For some time I have approached anything with the PV220s (only because its been itself features news!) but is considering a change in the current configuration.

  Currently, table is linked to a single PERC controller and lapping joined bus mode using all the discs 14. I think to do sets up another server connected to the second EMM and share the whole.

  This will happen because I do come aboard another server on the current workload and you need to move the databases.

  I have the following questions: -.

  1. If I understand correctly, a disk will be lost. This can then be configured as a hot spare or physically disconnected?
  2. This configuration is as simple as turning off the power, press the switch cluster mode and reboot all servers?
  3. It would be preferable to use instead the split bus?
  4. Choice of the mode of bus on the fly would cause data loss?

  As I said, its been a while that I have drawn on the PV since its been working fine. Maybe I shouldn't touch something which did not gave no problem, but I could do with the help of better space between the 2 servers.

  See you soon,.

  Pop

  
  

• How can I set up a password for office?

  Original title: implement the passoword office

  How can I set up a password in order to access the desktop?

  What you describe is the default method for Windows. If your computer falls directly on the desktop and then some configured Windows to remember your password and apply it automatically. You must now cancel this method (and take a step of it for later!):

  1. press Windows + R key on your keyboard.

  2. Enter the following command and press ENTER:

  netplwiz

  3. check the box that requires users to enter a password.

  4. click on OK.

• When my friend l. a automatic updates for Windows Vista, it can no longer browse the web, well connected (as evidenced by Skype and diagnostics) the message "internet explore cannot display the page" coming up. Is there a way to fix this?

  Explore cannot display the page
  Vista updates
  Restart

  Hello

  Welcome to Microsoft Windows Vista Forums.

  I suggest you follow these steps:

  Method 1: See if you can view another Web page

  To do this, follow these steps:

  Start Internet Explorer.

  In the top of the browser address bar, enter one of the following addresses:

  http://www.Microsoft.com

  http://www.MSN.com

  http://support.Microsoft.com

  If you do not receive a similar error message after entering one of these addresses in the address bar, contact the owner of the Web site where you see the problem. The website is maybe temporarily unavailable or other problems.
   
  If you receive the same error message, go to the next method.

  Method 2: Run the Network Diagnostics tool in Internet Explorer

  To do this, follow these steps:

  Start Internet Explorer, and then try to access the Web page that displays the error message.

  On the page that displays an Internet Explorer error message, click diagnose connection problems . The Network Diagnostics tool will run. When the tool has finished, it will notify if you one of the following results:

  He was unable to find a problem.

  It has detected a problem. In addition, the tool will provide guidance on the next steps to take to resolve the problem.

  Note Users of Internet Explorer 6, click on detect network settings

  Click IP address , and note the IP address. You may have to it for future troubleshooting.

  Follow the steps in the Network Diagnostics tool to fix any connection problems.

  Start Internet Explorer.

  If you receive the same error message, go to the next method.

  Method 3: Use the delete browsing history

  If resetting the modem or the router has not resolved the problem, delete your browsing history might help. Follow these steps to delete your temporary Internet files, history and form data:

  Internet Explore 7

  Start Internet Explorer.

  On the Tools menu, click delete browsing history .

  Select the check box next to Temporary Internet files .

  Select the check box next to the history .

  Select the check box next to form data .

  Select the check box next to Cookies .

  At the bottom of the window, click delete .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  Internet Explorer 6

  Start Internet Explorer.

  On the Tools menu, click Internet Options .

  In the Temporary Internet files section, click delete files and then click to select the text box delete all offline content , and then click OK .

  In the history section, click clear history , and then click Yes .

  Close Internet Explorer and restart Internet Explorer, and then try to access the Web page.

  If you receive the same error message, go to the next method.

  Method 4: Use the Internet Explorer (No Add-ons) mode

  To do this, click Start , point to programs , point to Accessories , point to System Tools and then click Internet Explorer (No Add-ons) .

  Note The Internet Explorer (No Add-ons) mode is only available for Internet Explorer 7 and Internet Explorer 8.

  If this resolves the problem, follow these steps to isolate the browser add-on that is causing the problem:

  Click Tools and then click Internet Options .

  Click on the programs tab, and then click Manage Add-ons .

  Click an add-on in the name list, and then click disable .

  Repeat step 3 until you identify the add-on that is causing the problem.

  If the methods in the "Resolution" section General did not resolve your issue, you can try to use the methods in the "Advanced Troubleshooting" section If you are not comfortable with advanced troubleshooting, you can ask for help or contact support. For information about how to contact support, please visit the Microsoft Web site at the following address:

  http://support.Microsoft.com/OAS/default.aspx?PRID=12357

  For more information follow the link below:

  http://support.Microsoft.com/kb/956196

  Hope this information is helpful

  Suresh G

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• lost or deleted audio drivers for computer vista laptop

  udioI thought I disabled drivers audio but discovered that they are no longer there.  How can I retrieve my audio drivers for a laptop using windows vista?

  Hello

  Go to the website of the manufacturer of your laptop > drivers download section > search your cell phone model and operating system > then find the Audio drivers > download and install.

  See you soon.