set which printer to use for printing

Similar Questions

• Should which driver I use for Windows XP on Portege R500 by WLan

  Because I couldn't get the wireless Lan driver, Intel, 11.1.0.100 references driver Toshiba download site (I'm redirected to a link that does not work), I went on the site: http://aps2.toshiba-tro.de/wlan/. Information about the two sites, all two of Toshiba, are contradictory:

  A site lists 11.1.0.100 references as driver for Windows XP, the other site of the 11.1.0.100 references as the driver for Vista 64 and the 11.1.1.16 as driver for Windows XP. Which should I use for Windows XP on Portege R500?

  Sorry my friend but after reading your question, I can just laugh. Use simply listed http://aps2.toshiba-tro.de/wlan/?page=downloads driver, install it and enjoy your life.

• We can share with the Community (related to oracle) document which can be useful for someone... ?

  Dear all,

  We can share with the Community (related to oracle) document which can be useful for someone... ? Is there a specific place, so that it... where, once that we download... our document is checked and published if it is deemed sufficiently credible... ?

  Thank you and best regards,

  Séverine Suresh

  Question has now moved to the space of the feedback from the community.

  The community provides for the possibility for members to upload documents to the content-> spaces of Documents in the workspace of each product (if available).  However, the feature is currently disabled for most members due to problems with spam, so only a few members (most of Oracle employees) have the necessary permissions to do this.

  The admin studying how they can implement something that would allow members to upload documents, etc., which also has some mechanism to prevent spam.

  There is an idea already created for this: allow users to create community Documents

  for the Admin provided details on their current attitude

• How can I me thunderbird to show me which passwords he uses for my email accounts?

  I use Ubuntu 14.04 and Thunderbird, and I need to find a way to get Thunderbird to show me what password he uses for each of my email accounts - and how I can change these passwords without deleting the old account and setting up new ones.

  I have similar responses to similar problems, but these require I'll under "Tools" - "options" - and more far away, but I can't find any menu 'Options' anywhere in my version of Thunderbird. However, this shows me that this information must be able to access it somehow, also in my version.

  Any help would be appreciated.

  Yes available menus and commands in the Windows of Thunderbird version is different from the version of Linux, I don't know why.
  I've got Xubuntu 14.04 so I guess that my version is the same as yours. See the Edit > preferences > Security > passwords > passwords saved.

• Which DLL to use for the use of NOR-PCI-6703? (nicaiu.dll or nidaq32.dll)

  Hello! I'm programming ATEasy (from Geotest Inc.). I have to incorporate a Council OR-PCI-6703 and I need the driver for it. I do not know what .dll file to use: nicaiu.dll or nidaq32.dll. What is the difference between these 2 files? What is the best for me to use? Please help me!

  It depends on if you use the traditional DAQ driver or the driver DAQmx. If you use the DAQmx driver you want to use the nicaiu.dll. This link will explain the necessary information to be able to use for your application.

  David has.

• Which card to use for the backup of Win8

  Windows 8 requires a minimum of 32 GB card to use for the backup. I bought a PNY 32 GB (http://www3.pny.com/32GB-Pro-Elite-Series-Hi-Speed-SDHC-Class-10-UHS-1---35MBs-233X-P3122C442.aspx ), but it wouldn't work. Even though it says 32 GB it is actually a little less. If I buy a 32 GB SanDisk will, that I meet the same problem? Exactly what the size is a SanDisk 32 GB card? (http://www.sandisk.com/products/memory-cards/sd/standard-class4/?capacity=32GB)

  Thank you

  Ed P2

  any card 32 GB will be less than 32GB after it is formatted to be used in a computer. It is a standard for all types of storage.

  If you need 32 GB of actual useful storage space, you will have to get a 64 GB card.

• Is there a book printed on how to use Thunderbird, as the "Dummies" Books series - which would be useful for us seniors?

  I am an older person who was very comfortable by using Outlook. MS took away XP, then I had to get a new computer with Windows 8.1. My service suggested Mozilla and responsible people. You (or someone) to publish a book with all the info I need to navigate through your program in the same place? (I read info printed on a page much better than on a screen of computer.) A format such as "Dummies" or "Fool" series would be great. Currently, I am looking for the instructions on your web page and I have to then write them. Your instructions are available in PDF format or something where I could just print them? A 'small Tour' print detailing what to expect from each of the headings / menu item would be useful. And knowing how Thunderbird compares - point to point in the jargon of both systems - with Outlook features would be the Holy Grail. My "Dummies" book on Win 8.1 bibliography Outlook but not Thunderbird.
  Parkinson's disease has slowed a bit my brain so I apologize for my lack of technical skills and knowledge or computer terms.
  Also, are there keyboard shortcuts for the use of bold, underline and italic in the body of my emails?
  Thank you for your patience.

  I'll try to print it as soon as I get a new printer. But at least I now have the web address. I'm trying to accumulate as much information that I can. It's a slow, flat learning curve. Through your post, I learned what FLOSS. Thanks again. I feel smarter already.

• Workstation 10: Configure which network to use for NAT

  I have a computer with three different networks altogether. My virtual machine (host and guest two Windows 7) connects to two of them through bridged networks that works very well. Now I want to connect to the third party network using NAT because I can't use bridged networking for technical reasons. I should mention that one of the bridged networks also has a default gateway. In the three networks I'm static IP assignment, the DHCP server is disabled.

  Unfortunately, it does not work. Can I have two working options:

  1 network 1 and 2 (those jumpered) work and I can ping all devices on these networks. Network 3 I can't ping anything or only the host computer.

  2. 1 (bridged with default gateway) network doesn't work, network 2 (packed without default gateway), and 3 the work of the network.

  I can switch between these two options by running the diagnostic tool network for one who does not. Windows does not give me any feedback it does and I can not see obvious differences in network settings, so I can't say. What I noticed though is the following: when I work with option 1 and try to ping a device for which I have to go to the default gateway, it is not actually use the default gateway in the virtual machine. Instead, by using the tracert command, I can see that the VM first goes on the NAT gateway to the host and the host on the default gateway to the desired address.

  So I guess the problem is that my computer (or virtual machine) does not know which of the three networks on the host, it should use.

  All solutions?

  In post work, networked bridged can connect to an individual a physical card, while networking NAT do not support this specific connection. I guess you can try to set your host routing table and your network third at the first entrance to the host routing table

• Which driver to use for Satellite A300 - last, by date or version?

  For my laptop (A300-1HV) I'm looking for drivers downloads.

  There are a lot of drivers that have a date LATER change of date, but the LOWER version number.
  Or if you wish, an EARLIER date change date and SUPERIOR version number.

  How do I decide which is the updated driver?

  Thank you.

  How long you use your laptop?
  You have problems with it?
  Is there a reason for update or you do not have the best thing to do?

  Maybe that sounds stupid but I'd like to know why you need it.

• Which device to use for the site to site VPN

  Hello

  Can someone recommend some inexpensive VPN devices, which will be set up to connect a few VPN site to site (20-30) (each site should not exceed 5 to 10 computers. The sites will be equipped with different VPN devices (like Linksys regular or any other - just able to site IPsec VPN). What I need is for my main site and hope get some suggestions.

  Thank you

  Ashok

  Hey Ashok

  Well, I'd say the firewall Cisco ASA 5500-x and Cisco ISR / ASR, two supported VPN from Site to Site on several sites.

  You can look into those if they meet your criteria.

  Concerning

  Véronique

• Which editor is used for Pro * C?

  Hi all
  I'm a developer Oracle with strong PL/SQL experience. I want to learn Pro * C.
  I looked for the Pro * C editor but could find none.
  I have the database to Oracle 10 g Rel 2 on my PC at home. I also installed customer Oracle 10 g Rel 2.
  (1) the editor is used to write programs in Pro * C? I don't have Microsoft Visual C++ on my PC at home.
  (2) out of Pro * C and Pro * C ++, which is better? that one is more commonly used?
  (3) can someone give me some tips on learning Pro * C?
  
  Thank you!
  Yogini

  Hi Marc,

  Or do I have another option?

  You can use the Instant Client 11.1.0.7 to connect to a database of 10.2.0.x. In my blog, I have connected to a database to Oracle 10 g Express Edition database. You may need to define the system path, etc. to move things in the proper order if this is all on the same machine, but do not too much work.

  Kind regards

  Mark

• Java ME SDK versions 3.2 and 3.3/3.4. Which one to use for 3.2 devices?

  Hello!

  We are at the point of a Java ME 3.2 device that will not be 3.3 or 3.4 in the near future. There are two versions of the SDK, but I don't see if you use the SDK 3.3/3.4 I can generate code to run in point 3.2.

  Also, we will start developing for Java ME 3.3 features as well.

  
  Can I use only 3.3/3.4 SDK for all software, or to have 2 environments, one for each version?

  3.2 and 3.3 me have significant differences in the peripheral access API.

  So, for 3.2 device you use ME SDK 3.2.

  For 3.3 devices you can use both ME SDK 3.3 or ME SDK 3.4 (there is no change in API between ME SDK 3.3 and 3.4 of the SDk to me), however in this case, I recommend using ME SDK 3.4 as the newest one.

• Which path to use for storage on mobile devices

  Hello

  Should I use applicationDirectory and applicationStorageDirectory to store items assets and database files, usually of files that I don't want the user to be able to access so that it does not remove a required file.

  In addition, how can ensure me that all the files are deleted on uninstall so that I'm not leaving trash on the phone of the user.

  Thank you.

  applicationStorageDirectory

  sure Android will store for you when its uninstalled.

• Which operator to use for "insert in...» "after that a mapping is executed (11 GR 2)

  I need to run an Insert Into statement after completing my internship to the mapping of the target...
  
  
  What operator would be the best to use?
  
  Published by: OutsideEdge on May 10, 2010 17:36

  Hello

  Something like...

  1. source
  Table operator COURSES
  and
  Operator CONSTANT (for 1 and null attributes)

  2. map both of them in a DEDUPLICATOR

  3. map of the DEDUPLICATOR to another operator of table of COURSE.

  See you soon
  David

• What / which method to use for the duplicate database

  Greetings, the Experts of Oracle
  
  I'm trying to replicate a database (src) of production to another machine (dest) for developers to do some tests before applying the changes to the production environment. The src and dest running Oracle 10 g 2 RHEL 4, 5.
  
  Due to the firewall in our environment policy, may that src and dest will not be able to see each other on the network. Also the directory structure will be different on src and dest.
  
  Now, there seems to be several methods available to achieve this:
  1. duplicate with RMAN, something like:

  rman TARGET sys/password@src NOCATALOG AUXILIARY sys/password@dest
  DUPLICATE TARGET DATABASE TO dest NOFILENAMECHECK;

  2. backup/restore with RMAN.
  3 use the Import and Export (including impdp/expdp) utilities.
  
  From my research so far, option 1 seems to be the method for this purpose. He also manages the directory structure difference quite well. However, it requires connection to src and dest simultaneously during replication. Is there a way it could be done from a backup image instead of a connection to the database of the CBC? Other 2 options are possible? Are there any other ways I could duplicate the database given the situation?
  
  Appreciate your help.

  If the CBC and destination cannot access another, then the simplest option will be #2 (restore a database to a new host: scenario) who also address the different directory structure.