setting moet naar devising smart card. hoe doe ik dat...

installation e.dentefire 'Aggro' bank account fails note of Pentecost: automatick smart card settings. How to do that.

(if possible in Dutch)

or call + 31 6 30216539

This question is answered. Thank you

Tags: Windows

Similar Questions

  • CS4 op oude xp perfect, herinstalleren op andere met Windows 7; Hoe doe ik dat?

    Mijn oude Xp proff. wordt renewed voor een Windows 7 computer, ik wil DW CS4 overzetten, wat moet ik doen?

    Bedankt!

    Yes, you should be able to install it on Windows 7. I don't have Windows 7, but I had DW CS4 installed on Windows 7 several years ago. It worked without problem.

  • The Authentucated smart card user session is stopped airtight when the card is removed, regardless of httpd SSLSessionCacheTimeout (default 300) setting. Why?

    I installed safety device in the option tab / advanced ff. Then using smart cards to connect to my server. The smart card user is authenticated and secure connection goes smoothly. When the card is removed from the card reader, the connection is immediately interrupted, regardless the SSLSessionCacheTimeout settings. Mine is set to 300.

    I did the same thing with IE, it maintains the connection until the expiry of the SSLSessionCacheTimeout.

    It is characteristic of FF-specific-designed? Or do I FF browser-specific sth keep my secure connection based on the parameter SSLSessionCacheTimeout?

    Thank you

    Hey SecureDevPaty,

    I wonder if you have installed a cert in the side server or client-side.

    I'm not an expert in the present, but these are the references that I found. I * think * after reading this session http://stackoverflow.com/questions/12.../session-disconnect-the-client-after-smart-card-is-removed LAA there is a feature of ssl in the about: config page. If you are looking for ssl, look at the features of trading. who, after having reread the thread we already did.

    I started to read more about the rules of ssl

    and a few rfcs. My question is, the rule for timeout, is this set on the server? with a specific rule in the cert? If it is a basis of cert, I would ask stackoverflow.com

  • 8460p: keep the smart card reader attached, even if the card is removed

    HP EliteBook 8460p

    Win 7 Pro 64-bit

    When a smart card is inserted, you are able to see your smart card reader in Device Manager. When you remove your card chip, the chip card reader disappears in Device Manager. Is it possible to always keep the smart card reader attached?

    According to the BIOS version (F.22) will there is a fix where you can set the power state of the smart card reader:

    '- Fixes an issue where the setup of BIOS (F10) does not display the power of smart card Options once the system is restarted. -Fixes an issue where rebooting the system (reboot) is slow after the modem is turned off in the configuration of the BIOS (F10). »

    But this isn't the case to find.

    Any suggestions?

    Concerning

    F27 BIOS and the new card reader is needed to solve this problem.

    old player = v1.20

    new player = v1.21

    /paasen

  • 9-in-1 smart card reader fails to detect the SD card

    The9-1 Card Reader 5069-6732 in my Pavilion a604x has recently started not detect SD (non-SDHC) card when it is inserted into the slot. However, SD cards are detected in other PCs and their respective devices (cameras) and the USB port, which is part of the drive functions normally, just like the other USB ports.

    I would appreciate any suggestions you may have about this problem more far.

    The troubleshooting steps taken so far are:

    • confirmed the Device Manager detects the drive, the most up-to-date driver is installed and no errors have been found
    • uninstalled the SD Reader USB Device in device drives Manager, then rebooted and it helped to reinstall
    • confirmed Card Services smart Windows runs in msconfig and is set to Automatic Startup Type
    • restored the system to a date 3 months ago (well before the problem started)
    • Reload the default BIOS
    • Removed the drive and cleaned and inspected the pins, double checked cable connections

    I'm unable to test other types of smart cards that are not available to me at the moment.

    Right now I'm leaning to buying another drive asuming the former one was defective, but wanted to make sure I'm not overlooking what that it be before I take this measure.

    Thanks for your help

    Solved!  Replaced the card reader... now works as expected

  • Bluetooth blackBerry Smartphones smart card configuration

    device 8830 w / 4.2.2.196

    SMIME version 4.2

    bluetooth BlackBerry w chip card reader / 4.1

    BES version 4.1.6.14

    Can I connect with the blackberry smart card reader, but whenever I try to import my certs from the player I get an error and the import fails.

    This is a policy setting.  Bluetooth serial port has been disabled

  • Error 1920 service smart card could not start. With the help of Windows 8

    We will try to install a CAC card on our computer to Windows 8. We have followed all the instructions so far, but continue to receive this error message when trying to install ActivClient: error 1920. (Scardsvr) smart card service failed to start. Make sure you have sufficient privledges to start system services.

    This is a new computer & I had not assigned to an administrator. I opened a window to run as administrator. We always get the same message! Help!

    wyosharonm,

    I met the same mistake during the installation of the drivers for a token PKI of Windows 8.

    I discovered the map service smart in the services of MMC has been set to disabled.

    I went it to autostart (haven't started yet manually it) and retried the installation and it seems to have done the trick.

  • Cannot install programs, prevented by smart card. Not sure what that means.

    Hello

    So I went to download just before steam and the pop up comes up and says "to continue, you must enter your administrative password and click Yes." there is no button 'Yes' just a box that says do not connect the smart card. nothing happens when I click on the area of the map to chip either. It's never happened before.

    Ive looked online and the people said to run "services.msc" and find the card chip and change the setting to manual and not automatic. But it won't let me change any of the properties.

    Don't know what to do about this, any help is appreciated.

    Duplicate thread:

    EDIT: if its not just the installation but opening programs ive used before and even uninstalled, basically everything.

    You do it on your personal computer or your computer employers? If his employers the computer, the network administrator may have set restrictions on the installation of the software not approved by your employer.

  • See 5.1.2 problem with smart cards - reader to not see Office.

    Hi all

    We try to roll an office linked Clone pool that is used by our service accounts and as such, they need to be able to use for banking smart cards. We have installed all the necessary software on the machine of model (GemSafe Gemalto) and also one of our Thin Clients (Wyse V10L or C10LE) connected to the model directly via RDP with the card reader chip attached to ensure that different drivers installed correctly and all is well, the virtual machine is able to see the smart card reader.

    The problem comes when spread us these machines up to the pool, the smart card reader is not detected at all. We tried to connect from the Client light view or via RDP directly to one of the linked Clone desktops and both meet the same problem, that is, the drive is not seen at all. If we plug/unplug the drive of the Wyse terminal we see it be detected in the log of the events on the Client itself.

    Can what tools or newspapers we use side view or VMware to solve this problem?

    To confirm, in the settings to connect to the server by smart card authentication is set to optional. In Global political USB access is set to allowed.

    If need more information please ask and I will be happy to provide it.

    Thanks in advance.

    Right, we got to the bottom of it... and I am kicking myself!

    There is a GPO side configuration of the active computer. Administrative Templates/Windows components/Remote Desktop Services / Remote Desktop Session Host / Device and resource Redirection - do not allow redirection of card device chip.

    GRRRR!

  • Smart card authentication does not

    I am currently configuring a deployment view in our environment.  Installation requires that we use smart cards to connect (Aladdin eToken Pro).  I have the aladdin software installed on the client computer.  When I run the client to view I don't get invited to my PIN and instead get a message indicating that this smart card is required for the connection.

    Smart card for my domain authentication is working because I need a smart card to connect to our current physical machines.

    Has anyone had an experience getting the aladdin etokens to work?

    Thank you

    Casey Shenberger

    It's really weird.  I don't expect this step to get this part working, but I guess stranger things have occurred.

    In general, the answer to your question is to set the GPO of Agent 'AllowSingleSignOn' to false/stop.  Then the SSO will not be attempted in remote desktop.  If, as you say, you don't want users to have access to the smart card reader in the remote desktop connection or for use with applications, the next step depends on the Protocol.  If the end users use PCoIP, then it seems that you do not want to install the Sub-function "PCoIP Smart Card" of the agent Installer and devices will not be redirected.  If end users use RDP, then use one of the client group policy to turn off the smart card redirection.  In my view, there is also a PCoIP GPO to do the same thing (or he respects the GPO of RDP, offhand, I don't remember that one).

  • How to load .cap on a smart card

    Hello world!

    I am very confused with java cards. I have written an applet for java card. Tried in Eclipse + JCWDE. Send a few APDU units with apdutool.bat. Works great!

    However, I would like to go further and try on a real card chip. The only problem is that I don't know how to load on my card .cap file. I tried to find forums, references or something like that, but all I found was "trying to load, but get the error" or something like that.

    I use the JCOP for Eclipse tool (if only for any help)

    Can someone find works me of loading in princip? Is their any classes that can be used to simplify the task?

    Any help is appreciated
    / L

    Yes of course. Normal .zip file.
    I can print the contents of the file load.jcsh here:

    # /set-var path d:/Wi-Fi/javacard/download/eappsk32k
#Switch trace mode on and connect to a PC/SC smart card reader
#
/mode trace=on
/terminal
#
#Reset the card (request ATR) and select the CardManager
/card
#Set the keys in key set 255 of the JCShell for authentication later on
#
set-key 255/1/DES-ECB/404142434445464748494A4B4C4D4E4F
set-key 255/2/DES-ECB/404142434445464748494A4B4C4D4E4F
set-key 255/3/DES-ECB/404142434445464748494A4B4C4D4E4F
#
#Begin authentication using the appropriate key set
init-update 255
#
#Complete authentication
ext-auth
#
#Display the card registry to check if the applet is loaded and installed
card-info
#
#delete 11223344556601
#delete 112233445566
card-info
#
#Upload the package holding the applet
upload ${path}openeapsmartcard.cap
#
#
#Install the applet in the package
install 112233445566 11223344556601
#
#Display the card registry to check if the applet is loaded and installed
card-info

    You should do a few substitutes for your project.

  • question on the smart card's mutual authentication process

    I have a question about the process to authenticate each other between the smart card and the host application.

    Basic knowledge
    As far as I understand, use of the host application the KMC to derive the static key, the value of the card and this set of keys, the host application creates the set of session keys. He uses this session defined key to check the cryptogram of the map and generate cryptogram of the host.

    Similar process is conducted by the card with the fact that static keys are stored in the vault of the smart card in the customization of the security field transmitter phase. It sends to the host application the cryptogram of the card.

    Framework
    I'm trying to review this process manually. I play the role of the host application and I have in hand the necessary cryptographic functions (Triple a) and Mac.

    Question
    I'm trying to calculate the MAC (cipher card) as described in section 5.4.1 of the CPS v1.1 (EMV card) but I can't receive the cryptogram of the card sent to me using the reference.
    Is there more than 1 function of MAC (in theory) and this MAC function varies from one card to another manufacturer?

    Thanks in advance
    Best regards
    JDL

    There may be something in the API c# BouncyCastle (I don't do much dotnet so I have not tried) http://www.bouncycastle.org/csharp/

    The MAC is relatively simple. There is a line where you encrypt a block of data at a time (as opposed to entire entry) and feed the result of an iteration in the next as the ICV (initial vector chaining). The original ICV value is 0x00 all.

    See you soon,.
    Shane

  • Remote graphics software: Support for smart card for the RGS

    Hello community!

    Read the manual of RGS 7.2, the section on smart card authentication implies that the functionality is restricted to the receivers of Windows. Should the sender also be a Windows system? For example, you could use a receiver of Windows with a smart card reader to transmit this information to a sender of Linux supported?

    Thank you!

    Smart cards are not supported on shippers Linux at this time.

  • Tecra Z50 - A - 18 d - smart card reader does not work

    My Tecra O2Micro OZ776 chip card reader sees the cards.
    Device Manager reports "the device is working properly" and the latest version (2.1.4.222) of the drivers are installed.
    If a card is inserted or no, running "certutil.exe - scinfo" at a prompt gives:
    - - - - - -
    The Microsoft Smart Card Resource Manager is running.
    Current reader/card status:
    Readers: 1
    0: O2Micro CCID SC Reader 0
    -Player: O2Micro CCID SC Reader 0
    -Status: SCARD_STATE_EMPTY
    -Status: not card.
    -Map:

    ================================================== =====
    Card in the reader analysis: O2Micro CCID SC Reader 0

    --------------===========================--------------

    Fact.
    CertUtil:-SCInfo command completed successfully.
    - - - - - -
    I tried a variety of different card chipped and none of them even register as present in the drive.
    Does anyone have an idea what is happening here? Is there any sort of software adapted to this situation?

    Ah... never mind, the old trick of powercycle fixed the problem...

  • Want to 700-021eo. : 15-one smart card reader will not work or show after upgrade to Win10

    15-one smart card reader worked fine under WIN 8.1 but after that upgrade to Win10 it does not appear in the list of devices. I have tried to find drivers but don't know if it's a unit of HP or Realtek or whatever. Any suggestions?

    Kind regards

    Eyvind

    Hello @Eyka,

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand that you have a problem with the smart card reader and wanted to help you!  I see that this problem started after the upgrade of OS Windows 10.

    It seems that there are no Windows 10 drivers available for your product on the HP site.  It seems that Windows 10 drivers can be pushed through Windows Update.  Alternatively, you can try to check this site as well:

    HP products - where to find Windows 10 drivers and software for my model?

    If you have problems to install the drivers, you can use the tool on the following site:

    Open the Windows Update troubleshooting tool

    It is possible that the drivers are not available for your product.  If this is the case, or the drivers you found do not work, try to use the solutions on this site to work around the problem and let me know how it goes: how: install and update drivers in Windows 10

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great weekend!

Maybe you are looking for